Re: problem booting Supermicro PDSMA

[RedShift]

Jean-Yves Boisiaud wrote:

hello,

We've just bought a Supermicro PDSMA motherboard and we would like to 
install OBSD 4.0.


Specific hardware is a SATA II RAID controler, an Areca 1110.

North bridge : Mukilteo E7230
South bridge : ICH7R

2 GB lan controlers on the motherboard, an Intel PRO/1000MT and a 1000PT.

Here is the end of the boot sequence (the Areca seems to be ok) :

pci5 at ppb4 bus13
em0 at pci5 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03 : irq 
11, address ...
vendor Intel, unknown product 0x108f (class communications subclass 
serial, rev 0x03) at pci 5 dev 0 function 3 not configured
em1 at pci5 dev 0 function 4 Intel PRO/100PT (82573E) rev 0x03 : irq 


^^
That looks weird (Intel PRO/*100*PT). Can you try with disabling those 
onboard NICs?




11uvm_fault(0xd067a780, 0xe8f4F000, 0, 1) - e
fatal page fault (6) in supervisor mode
trap type 6 code0 eip ...
panic: trap type 6, code 0, pc=d0391733

Thanks for your answer.

Re: problem booting Supermicro PDSMA

[Stuart Henderson]

On 2007/02/23 14:54, RedShift wrote:
 vendor Intel, unknown product 0x108f (class communications subclass 
 serial, rev 0x03) at pci 5 dev 0 function 3 not configured

Intel AMT, serial-over-lan port.
Source: 
http://216.239.59.104/search?q=cache:www.zept.co.jp/services/NEXXUS4800PT_Motherboard_TPS_rev_1_0.pdf

Already in pcidevs in -current.

 em1 at pci5 dev 0 function 4 Intel PRO/100PT (82573E) rev 0x03 : irq 
 ^^
 That looks weird (Intel PRO/*100*PT).

dropped char over serial port, perhaps? I can't see where else
it's likely to come from.

 Can you try with disabling those onboard NICs?

or a snapshot, perhaps?