Re: [Mjpeg-users] capture card not working with nvidia driver
Hallo, On 10/23/19 12:55 PM, Bernhard Praschinger wrote: > Hallo > > The name of the missing so: nouveau makes me think that libgl tries to > load something mesa related. I have the file on my opensuse in the RPM > Package: Mesa-dri-nouveau > (Mesa DRI plug-in for 3D acceleration via Nouveau) > > Maybe CentOS has also a package that provides the library. > I have checked the CentOS-6 rpm resources but did not find anything mesa nouveau related. I do have a bunch of mesa packages installed, though. > When I remember correct you wanted to used the original nvidia driver. > And for some strange reason the system want's now to load the mesa > driver and not the nvidia driver. > Yes. xawtv works with nv driver, but not with nvidia proprietary driver or the nouveau driver CentOS-6 has. I can live with that since I can boot into any of these installations. The only problem with the nv driver boot is that it cannot fully utilize my 24" LCD display - which is OK. It looks like the CentOS nouveau driver is more stable than my highly customized - and probably bugged up - Fedora-3 installation. So I was happy to find CentOS-6 that works on my old 32-bit machine and has the nouveau driver. Apparently the dri-vieux is missing somehow. Strangely, I encountered the same problem when I updated the CentOS-6 according to its requirements, which included a firefox update. Now firefox would not start because of the missing dri-vieux. So I reverted back to the non-updated version of CentOS firefox, and it works again. I will do some further research on a CentOS forum. Maybe that will fix xatv as well. I'll report on it - thanks. > Janos G Komaromi wrote: >> Update: >> >> Found rpm package for the CentOS-6 and installed it after resolving >> libaa and libzvbi dependencies from the same package site. xawtv >> program started OK with blue screen window and complete settings >> window. However, I could not select the shown "overlay" capture >> option. The terminal output after entering xawtv command complains >> about: >> >> libGL error: could not load nouveau_vieux_dri.so. >> >> ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
Re: [Mjpeg-users] capture card not working with nvidia driver
Hallo The name of the missing so: nouveau makes me think that libgl tries to load something mesa related. I have the file on my opensuse in the RPM Package: Mesa-dri-nouveau (Mesa DRI plug-in for 3D acceleration via Nouveau) Maybe CentOS has also a package that provides the library. When I remember correct you wanted to used the original nvidia driver. And for some strange reason the system want's now to load the mesa driver and not the nvidia driver. Janos G Komaromi wrote: Update: Found rpm package for the CentOS-6 and installed it after resolving libaa and libzvbi dependencies from the same package site. xawtv program started OK with blue screen window and complete settings window. However, I could not select the shown "overlay" capture option. The terminal output after entering xawtv command complains about: libGL error: could not load nouveau_vieux_dri.so. On 10/6/19 10:01 PM, Janos G Komaromi wrote: Other, related: I installed CentOS-6 (latest available RedHat distro for a 32-bit machine). Sorry that I can't provide more help, und auf hoffentlich bald, Berni the Chaos of Woodquarter Email: shadowl...@utanet.at www: http://www.lysator.liu.se/~gz/bernhard ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
Re: [Mjpeg-users] capture card not working with nvidia driver
Update: Found rpm package for the CentOS-6 and installed it after resolving libaa and libzvbi dependencies from the same package site. xawtv program started OK with blue screen window and complete settings window. However, I could not select the shown "overlay" capture option. The terminal output after entering xawtv command complains about: libGL error: could not load nouveau_vieux_dri.so. On 10/6/19 10:01 PM, Janos G Komaromi wrote: > > Other, related: I installed CentOS-6 (latest available RedHat distro > for a 32-bit machine). ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
Re: [Mjpeg-users] capture card not working with nvidia driver
Hallo, On 10/5/19 1:32 AM, Bernhard Praschinger wrote: > Hallo > > I'm just guessing but could it be that the nvidia driver expects a > different format or calls so it displays the video ? When you write > that you had problems with the drm and framebuffer modules, I guess > that they expect different API/Header/calls. Did you try a different > xawtv version ? > > Did you try the different options xawtv offers ? (-fb, -xv/-noxv, > -dga/-nodga and others ) > Yes, I've tried them, none made a difference. In fact when I logged off (restarting X-server) the machine crashed. The nvidia driver may not be very stable on my machine. Other, related: I installed CentOS-6 (latest available RedHat distro for a 32-bit machine). It does have the nvidia equivalent nouveau driver, correct screen resolutions, and has not crashed yet. This is somewhat an updated version of my old Fedora-3 system that I heavily customized. xawtv works well if I boot to that system. So I tried tocompile xawtv on the CentOS, but make ended up in error. See below some relevant info: xawtv-3.95 ./configure --enable-alsa --enable-gl --with-x configure: creating ./config.status config.status: creating Makefile config.status: creating xawtv.spec config.status: creating config.h console/fbtools.c:24:22: error: asm/page.h: No such file or directory console/fbtools.c: In function ‘fb_init’: console/fbtools.c:427: error: ‘PAGE_MASK’ undeclared (first use in this function) console/fbtools.c:427: error: (Each undeclared identifier is reported only once console/fbtools.c:427: error: for each function it appears in.) make: *** [console/fbtools.o] Error 1 Thanks, and Janos ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
Re: [Mjpeg-users] capture card not working with nvidia driver
Hallo My older machine with a cheap bttv capture card works well with nv module driving GFORCE 2 MX card. Framebuffer and tiny penguin at boot up shows, xawtv, glav, etc. works well for video capture and editing. Recently I installed the proprietary nvidia driver (92.43.23). I had to recompile the kernel (2.6.32.71) because the nvidia driver conflicted with the kernel's drm and framebuffer modules. OK, now I have the full capability of my 24" LCD display with the nvidia driver; AGP is fully functional and glxgears runs fast. However, video capture is not possible anymore: xawt screen is blue, but the setup screen lacks sections starting with video source. I can play existing video files, just capture capability is dead. So now I made my machine to dual boot with nv driver or nvidia; I also switch xorg.conf at boot via rc.local by sensing kernel version loaded. I'm writing to this forum with a hope that somebody has some idea how to make nvidia proprietary driver to work with video capture card. Maybe I should go to some nvidia forum, but I trust the expertise of those who follow mjpeg-users bulletin board. I'm just guessing but could it be that the nvidia driver expects a different format or calls so it displays the video ? When you write that you had problems with the drm and framebuffer modules, I guess that they expect different API/Header/calls. Did you try a different xawtv version ? Did you try the different options xawtv offers ? (-fb, -xv/-noxv, -dga/-nodga and others ) One more info: the sysrcd-5.0.0 with 4.9.24 kernel works on my machine; it loads the nouveau driver, screen resolution is identical with nvidia driver. I tried to compile 2.6.33.1 kernel from source (the first kernel that has the nouveau driver), but could not configure to include the nouveau module. I thought that with the nouveau module, instead of nvidia driver, capture would work again. Thanks for your attention - Janos auf hoffentlich bald, Berni the Chaos of Woodquarter Email: shadowl...@utanet.at www: http://www.lysator.liu.se/~gz/bernhard ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
[Mjpeg-users] capture card not working with nvidia driver
Hello everyone, My older machine with a cheap bttv capture card works well with nv module driving GFORCE 2 MX card. Framebuffer and tiny penguin at boot up shows, xawtv, glav, etc. works well for video capture and editing. Recently I installed the proprietary nvidia driver (92.43.23). I had to recompile the kernel (2.6.32.71) because the nvidia driver conflicted with the kernel's drm and framebuffer modules. OK, now I have the full capability of my 24" LCD display with the nvidia driver; AGP is fully functional and glxgears runs fast. However, video capture is not possible anymore: xawt screen is blue, but the setup screen lacks sections starting with video source. I can play existing video files, just capture capability is dead. So now I made my machine to dual boot with nv driver or nvidia; I also switch xorg.conf at boot via rc.local by sensing kernel version loaded. I'm writing to this forum with a hope that somebody has some idea how to make nvidia proprietary driver to work with video capture card. Maybe I should go to some nvidia forum, but I trust the expertise of those who follow mjpeg-users bulletin board. One more info: the sysrcd-5.0.0 with 4.9.24 kernel works on my machine; it loads the nouveau driver, screen resolution is identical with nvidia driver. I tried to compile 2.6.33.1 kernel from source (the first kernel that has the nouveau driver), but could not configure to include the nouveau module. I thought that with the nouveau module, instead of nvidia driver, capture would work again. Thanks for your attention - Janos ___ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users