Re: [MORPHMET] 3D surface scanner information
Hi Miguel, If you're going to do morphometrics on teeth, be aware that they are tricky to scan. Many scanners don't handle specular/translucent objects all that well. Blue light scanners (eg HDI100 series, Breuckmann) tend to do better in that respect. Martin Quoting Miguel Eduardo Delgado Burbano: Hello everyone I am interested to obtain a 3D surface scanner which will be used to study hominin teeth and skulls. Does anyone have any experience, suggestions and/or recommendations? For instance price, resolution, peformance, manipulation (portable) thanks in advance Miguel Miguel Delgado PhD CONICET-División Antropología. Facultad de Ciencias Naturales y Museo. Universidad Nacional de La Plata Paseo del Bosque s/n. La Plata 1900. Argentina Cel: 5492216795916. Fax: 54 221 4257527 https://unlp.academia.edu/DelgadoMiguel http://www.cearqueologia.com.ar/ E-mail: medelg...@fcnym.unlp.edu.ar - -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org. -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.
RE: [MORPHMET] 3D surface scanner information
Hi Miguel, I've been using a Creaform GoSCAN50, and am very happy with it (I scan ceramics though; not hominins). There are two of these scanners (GoSCAN20 and GoSCAN50 - see http://www.creaform3d.com/en/metrology-solutions/handheld-portable-3d-scanner-goscan-3d); the 20 gets better detail on smaller objects, and the 50 is better for medium/large objects. Depending on the level of detail that you need (particularly for the teeth), it might be better to opt for the 20. I recently used a 20 to scan a projectile point (https://skfb.ly/ATNV), and it worked quite well. A few examples from the GoSCAN50 here: Ceramic vessel from Salvador, Brazil (takes a moment for the texture file to load) - https://skfb.ly/AGtZ Caddo effigy pipe (frog) from Louisiana (US) - https://skfb.ly/JMvv Caddo ceramic bowl from Texas (US) - https://skfb.ly/JM6W Some of my colleagues have produced some good scans with the NextEngineHD (http://www.nextengine.com/); these from Bernard Means: Racoon Skull - https://skfb.ly/EoVw Owl Skull - https://skfb.ly/EoVP There are also some good examples of folks using photogrammetry (123D Catch, AgiSoft, etc.) for this kind of application; although I don't have those handy. Yet another option would be to see if there is anyone on campus (engineering departments usually have quite a few) that might be willing and able to help. While I was in grad school, we ran across a CT scanner in the petroleum engineering department that they needed to justify purchasing, so they let us run as many samples as we wanted to at no cost. The art department also had quite a few scanners. It all comes down to what you have experience with, and what you're most comfortable with; particularly since you will be spending quite a bit of time with this equipment. There are advantages and drawbacks to every surface scanner and photogrammetry program. If you have an opportunity to demo a scanner or photogrammetry program, I would take it (there may be a variety of product reps in your area). As things get published, we've been uploading our scan data to Zenodo (https://zenodo.org/collection/user-caddo_nagpra_3d); bound to be other examples there and elsewhere that you can explore. Best of luck, Zac -Original Message- From: Miguel Eduardo Delgado Burbano [mailto:mdelgadoburb...@gmail.com] Sent: Monday, January 18, 2016 6:10 PM To: morphmet@morphometrics.org; morphmet_modera...@morphometrics.org Subject: [MORPHMET] 3D surface scanner information Hello everyone I am interested to obtain a 3D surface scanner which will be used to study hominin teeth and skulls. Does anyone have any experience, suggestions and/or recommendations? For instance price, resolution, peformance, manipulation (portable) thanks in advance Miguel Miguel Delgado PhD CONICET-División Antropología. Facultad de Ciencias Naturales y Museo. Universidad Nacional de La Plata Paseo del Bosque s/n. La Plata 1900. Argentina Cel: 5492216795916. Fax: 54 221 4257527 https://unlp.academia.edu/DelgadoMiguel <https://urldefense.proofpoint.com/v2/url?u=https-3A__unlp.academia.edu_DelgadoMiguel=AwMFaQ=2X_btuPRWkGwRX26NHIotw=BzjivF1QeBfI_3LA2VUN9ft9kB36GKxt8Ke21CMTTJU=_yMz4_fPydvxBHPfznWW2bMkvyyK0vrm47EDxT-zAxI=5AHSpC1-D2-uNNtx0OB1jpt4oPypMqMjRjFSpjpcjgk=> http://www.cearqueologia.com.ar/ <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.cearqueologia.com.ar_=AwMFaQ=2X_btuPRWkGwRX26NHIotw=BzjivF1QeBfI_3LA2VUN9ft9kB36GKxt8Ke21CMTTJU=_yMz4_fPydvxBHPfznWW2bMkvyyK0vrm47EDxT-zAxI=5erWAQFNH3KP3pLl2HKwscUvKclHSuKy9bSBwlrOC70=> E-mail: medelg...@fcnym.unlp.edu.ar <mailto:medelg...@fcnym.unlp.edu.ar> - -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.morphometrics.org=AwMFaQ=2X_btuPRWkGwRX26NHIotw=BzjivF1QeBfI_3LA2VUN9ft9kB36GKxt8Ke21CMTTJU=_yMz4_fPydvxBHPfznWW2bMkvyyK0vrm47EDxT-zAxI=72Onrzo4Pn-vMFzZ3CgpeurJfD0CeO0pexprcXYhj5k=> --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org. -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org. smime.p7s Description: S/MIME cryptographic signature
Re: [MORPHMET] 3D surface scanner information
Hi, This subject pops up every few months on Morphmet. The general consensus is that either Creaform or structured light scanners like Artec or LMI have made are generally very satisfactory solutions. People like Breuckmann are an order of magnitude more expensive but also very good. You'll want to budget at least $20-30,000 to set yourself up properly with both scanners and workstations/post-processing software. Popular post software include geomagic and polyworks. They work extremely well but cost $$$. For CT, Amira/Avizo has a minimal learning curve but again costs $$$. I can't give exact prices as they will give you a bespoke quote depending on number of workstations etc. Stradwin is a nice freeware solution for CT if your scans don't have too many problems (e.g. fossil embedded in matrix, low contrast). For fossil hominins, bear in mind that a large proportion have been either CT or MicroCT scanned, and curators will be loth to allow surface scanning on top. So a CT program is useful for processing already existing scans. Photoscan is worth playing about with, as it only costs $50. With a good protocol you can get some extremely good results from skulls and mandibles (think good camera and lazy Susan). Disclosure-I run a small consultancy on 3d imaging and work with LMI in the UK. All the best, Tom O'Mahoney University of Manchester, Faculty of lifesciences On 19 January 2016 at 11:56, Robert Z. Selden, Jr. <selden...@sfasu.edu> wrote: > Hi Miguel, > > I've been using a Creaform GoSCAN50, and am very happy with it (I scan > ceramics though; not hominins). There are two of these scanners (GoSCAN20 > and GoSCAN50 - see > http://www.creaform3d.com/en/metrology-solutions/handheld-portable-3d-scanner-goscan-3d); > the 20 gets better detail on smaller objects, and the 50 is better for > medium/large objects. Depending on the level of detail that you need > (particularly for the teeth), it might be better to opt for the 20. I > recently used a 20 to scan a projectile point (https://skfb.ly/ATNV), and > it worked quite well. > > A few examples from the GoSCAN50 here: > > Ceramic vessel from Salvador, Brazil (takes a moment for the texture file > to load) - https://skfb.ly/AGtZ > > Caddo effigy pipe (frog) from Louisiana (US) - https://skfb.ly/JMvv > > Caddo ceramic bowl from Texas (US) - https://skfb.ly/JM6W > > Some of my colleagues have produced some good scans with the NextEngineHD ( > http://www.nextengine.com/); these from Bernard Means: > > Racoon Skull - https://skfb.ly/EoVw > > Owl Skull - https://skfb.ly/EoVP > > There are also some good examples of folks using photogrammetry (123D > Catch, AgiSoft, etc.) for this kind of application; although I don't have > those handy. > > Yet another option would be to see if there is anyone on campus > (engineering departments usually have quite a few) that might be willing > and able to help. While I was in grad school, we ran across a CT scanner in > the petroleum engineering department that they needed to justify > purchasing, so they let us run as many samples as we wanted to at no cost. > The art department also had quite a few scanners. > > It all comes down to what you have experience with, and what you're most > comfortable with; particularly since you will be spending quite a bit of > time with this equipment. There are advantages and drawbacks to every > surface scanner and photogrammetry program. If you have an opportunity to > demo a scanner or photogrammetry program, I would take it (there may be a > variety of product reps in your area). > > As things get published, we've been uploading our scan data to Zenodo ( > https://zenodo.org/collection/user-caddo_nagpra_3d); bound to be other > examples there and elsewhere that you can explore. > > Best of luck, > Zac > > > > -Original Message- > From: Miguel Eduardo Delgado Burbano [mailto:mdelgadoburb...@gmail.com] > Sent: Monday, January 18, 2016 6:10 PM > To: morphmet@morphometrics.org; morphmet_modera...@morphometrics.org > Subject: [MORPHMET] 3D surface scanner information > > Hello everyone > > > I am interested to obtain a 3D surface scanner which will be used to study > hominin teeth and skulls. Does anyone have any experience, suggestions > and/or recommendations? > > > For instance price, resolution, peformance, manipulation (portable) > > > > > thanks in advance > > > Miguel > > > > Miguel Delgado PhD > CONICET-División Antropología. > Facultad de Ciencias Naturales y Museo. > Universidad Nacional de La Plata > Paseo del Bosque s/n. La Plata 1900. Argentina > Cel: 5492216795916. Fax: 54 221 4257527 > https://unlp.academia.edu/Delgad
[MORPHMET] 3D surface scanner information
Hello everyone I am interested to obtain a 3D surface scanner which will be used to study hominin teeth and skulls. Does anyone have any experience, suggestions and/or recommendations? For instance price, resolution, peformance, manipulation (portable) thanks in advance Miguel Miguel Delgado PhD CONICET-División Antropología. Facultad de Ciencias Naturales y Museo. Universidad Nacional de La Plata Paseo del Bosque s/n. La Plata 1900. Argentina Cel: 5492216795916. Fax: 54 221 4257527 https://unlp.academia.edu/DelgadoMiguel http://www.cearqueologia.com.ar/ E-mail: medelg...@fcnym.unlp.edu.ar - -- MORPHMET may be accessed via its webpage at http://www.morphometrics.org --- You received this message because you are subscribed to the Google Groups "MORPHMET" group. To unsubscribe from this group and stop receiving emails from it, send an email to morphmet+unsubscr...@morphometrics.org.