RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread John Marcum 
Create a new one. I had this issue and it was because I had updated the boot 
image on the server and once those two are out of sync this will happen



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Mike Murray
Sent: Wednesday, November 15, 2017 12:17 PM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Yes, I generated a site-based media ISO.

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of John Marcum
Sent: Wednesday, November 15, 2017 10:04 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Are you booting from an iso?



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Mike Murray
Sent: Wednesday, November 15, 2017 10:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Yes, it's one of the first steps before this error. BUT, this is a brand new 
Hyper-V VM, it's not bitlocked.

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of nick aquino
Sent: Wednesday, November 15, 2017 5:55 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

'GetConversionStatus' failed (2150694912) = This drive is locked by BitLocker 
Drive Encryption. You must unlock this drive from Control Panel.

Did you disable bitlocker for the upgrade?

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I'm trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I've 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I'm getting an IP Here are the errors in smsts.log (I'm 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml

[mssms] RE: ConfigMgr Site Server on Azure Site Recovery

2017-11-15 Thread Brian Illner 
Don't want to get off track from the initial point.

CM backup task is irrelevant to it, but I mentioned it only because the first 
thing ppl ask me to do is go back and look at the smsbkup.log, which is 
completely blank during these hourly site backups.

The issue is that for us, using ASR for our ConfigMgr site server is breaking 
the normal operation of ConfigMgr.

Surely we can't be the only MS customers attempting this?
BRIAN ILLNER | Canal Insurance Company
864.250.9227
864.679.2537 Fax

[cid:image001.jpg@01D35E51.386177B0]

Visit canalinsurance.com for news and information.

[cid:image002.jpg@01D35E51.386177B0]
WARNING:  As the information in this transmittal (including attachments, if 
any) may contain confidential, proprietary, or business trade secret 
information, it should only be reviewed by those who are the intended 
recipients.  Unless you are an intended recipient, any review, use, disclosure, 
distribution or copying of this transmittal (or any attachments) is strictly 
prohibited.   If you have received this transmittal in error, please notify me 
immediately by reply email and destroy all copies of the transmittal.  While 
Canal believes this transmittal to be free of virus or other defect, it is the 
responsibility of the recipient to ensure that it is virus free and no 
responsibility is accepted by Canal (or its subsidiaries and affiliates) for 
any loss or damage arising therefrom.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of John Marcum
Sent: Wednesday, November 15, 2017 6:27 PM
To: mssms@lists.myitforum.com
Subject: [mssms] RE: ConfigMgr Site Server on Azure Site Recovery

I'm not doing that howeverif you are snapping the server do you even need 
that backup?



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Brian Illner
Sent: Wednesday, November 15, 2017 5:12 PM
To: mssms@lists.myITforum.com
Subject: [mssms] ConfigMgr Site Server on Azure Site Recovery

Anyone running CM on a Hyper-V VM protected through ASR?

We're having an issue where the hourly Azure snapshot is causing the VM's VSS 
service to initiate a CM site backup. This process is completely happening 
outside the CM Maintenance Backup task and that backup log shows no data being 
written to it.

This is causing my scheduled ADRs and Software Update synchronizations to fail 
as all the CM components stop and restart when the VM snapshot hits.

BRIAN ILLNER | Senior Systems Administrator
864.250.9227
864.679.2537 Fax

Canal Insurance Company
400 East Stone Avenue
Greenville, SC 29601
[cid:image001.jpg@01D35E36.F9D72DB0]

Visit canalinsurance.com for news and information.

[cid:image002.jpg@01D35E36.F9D72DB0]
WARNING:  As the information in this transmittal (including attachments, if 
any) may contain confidential, proprietary, or business trade secret 
information, it should only be reviewed by those who are the intended 
recipients.  Unless you are an intended recipient, any review, use, disclosure, 
distribution or copying of this transmittal (or any attachments) is strictly 
prohibited.   If you have received this transmittal in error, please notify me 
immediately by reply email and destroy all copies of the transmittal.  While 
Canal believes this transmittal to be free of virus or other defect, it is the 
responsibility of the recipient to ensure that it is virus free and no 
responsibility is accepted by Canal (or its subsidiaries and affiliates) for 
any loss or damage arising therefrom.

[mssms] RE: ConfigMgr Site Server on Azure Site Recovery

2017-11-15 Thread John Marcum 
I'm not doing that howeverif you are snapping the server do you even need 
that backup?



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Brian Illner
Sent: Wednesday, November 15, 2017 5:12 PM
To: mssms@lists.myITforum.com
Subject: [mssms] ConfigMgr Site Server on Azure Site Recovery

Anyone running CM on a Hyper-V VM protected through ASR?

We're having an issue where the hourly Azure snapshot is causing the VM's VSS 
service to initiate a CM site backup. This process is completely happening 
outside the CM Maintenance Backup task and that backup log shows no data being 
written to it.

This is causing my scheduled ADRs and Software Update synchronizations to fail 
as all the CM components stop and restart when the VM snapshot hits.

BRIAN ILLNER | Senior Systems Administrator
864.250.9227
864.679.2537 Fax

Canal Insurance Company
400 East Stone Avenue
Greenville, SC 29601
[cid:image001.jpg@01D35E36.F9D72DB0]

Visit canalinsurance.com for news and information.

[cid:image002.jpg@01D35E36.F9D72DB0]
WARNING:  As the information in this transmittal (including attachments, if 
any) may contain confidential, proprietary, or business trade secret 
information, it should only be reviewed by those who are the intended 
recipients.  Unless you are an intended recipient, any review, use, disclosure, 
distribution or copying of this transmittal (or any attachments) is strictly 
prohibited.   If you have received this transmittal in error, please notify me 
immediately by reply email and destroy all copies of the transmittal.  While 
Canal believes this transmittal to be free of virus or other defect, it is the 
responsibility of the recipient to ensure that it is virus free and no 
responsibility is accepted by Canal (or its subsidiaries and affiliates) for 
any loss or damage arising therefrom.

[mssms] ConfigMgr Site Server on Azure Site Recovery

2017-11-15 Thread Brian Illner 
Anyone running CM on a Hyper-V VM protected through ASR?

We're having an issue where the hourly Azure snapshot is causing the VM's VSS 
service to initiate a CM site backup. This process is completely happening 
outside the CM Maintenance Backup task and that backup log shows no data being 
written to it.

This is causing my scheduled ADRs and Software Update synchronizations to fail 
as all the CM components stop and restart when the VM snapshot hits.

BRIAN ILLNER | Senior Systems Administrator
864.250.9227
864.679.2537 Fax

Canal Insurance Company
400 East Stone Avenue
Greenville, SC 29601
[cid:image001.jpg@01D35E3D.3CE59050]

Visit canalinsurance.com for news and information.

[cid:image002.jpg@01D35E3D.3CE59050]
WARNING:  As the information in this transmittal (including attachments, if 
any) may contain confidential, proprietary, or business trade secret 
information, it should only be reviewed by those who are the intended 
recipients.  Unless you are an intended recipient, any review, use, disclosure, 
distribution or copying of this transmittal (or any attachments) is strictly 
prohibited.   If you have received this transmittal in error, please notify me 
immediately by reply email and destroy all copies of the transmittal.  While 
Canal believes this transmittal to be free of virus or other defect, it is the 
responsibility of the recipient to ensure that it is virus free and no 
responsibility is accepted by Canal (or its subsidiaries and affiliates) for 
any loss or damage arising therefrom.

Re: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread Adam Juelich 
Which version of the ADK and which version of Windows 10?

On Wed, Nov 15, 2017 at 12:17 PM, Mike Murray  wrote:

> Yes, I generated a site-based media ISO.
>
>
>
> *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists.
> myitforum.com] *On Behalf Of *John Marcum
> *Sent:* Wednesday, November 15, 2017 10:04 AM
> *To:* mssms@lists.myitforum.com
> *Subject:* RE: [mssms] OSD problem - Failed to save environment to
> (80070057)
>
>
>
> Are you booting from an iso?
>
>
>
>
>
> Sensitivity: Confidential between partners
>
> *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists.
> myitforum.com ] *On Behalf Of *Mike Murray
> *Sent:* Wednesday, November 15, 2017 10:22 AM
> *To:* mssms@lists.myitforum.com
> *Subject:* RE: [mssms] OSD problem - Failed to save environment to
> (80070057)
>
>
>
> Yes, it’s one of the first steps before this error. BUT, this is a brand
> new Hyper-V VM, it’s not bitlocked.
>
>
>
> *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists.
> myitforum.com ] *On Behalf Of *nick aquino
> *Sent:* Wednesday, November 15, 2017 5:55 AM
> *To:* mssms@lists.myitforum.com
> *Subject:* RE: [mssms] OSD problem - Failed to save environment to
> (80070057)
>
>
>
> 'GetConversionStatus' failed (2150694912) = This drive is locked by
> BitLocker Drive Encryption. You must unlock this drive from Control Panel.
>
>
>
> Did you disable bitlocker for the upgrade?
>
>
>
> *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists.
> myitforum.com ] *On Behalf Of *Adam
> Juelich
> *Sent:* Tuesday, November 14, 2017 11:05 PM
> *To:* mssms@lists.myitforum.com
> *Subject:* Re: [mssms] OSD problem - Failed to save environment to
> (80070057)
>
>
>
> Which ADK version and which Windows 10 version?  If you enable testing and
> hit F8, do you see the drive?
>
>
>
> For what it's worth, I've NEVER had to insert a storage or NIC driver if
> I've kept up with the ADKs.
>
>
>
> On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray  wrote:
>
> Brand new SCCM server! CM1702. I’m trying to deploy windows 10, the task
> sequence fails. Googling seems to indicate a missing storage driver, but
> I’ve imported mass storage drivers to the boot image. If I hit F8, I can
> see the disk in diskpart. And I’m getting an IP Here are the errors in
> smsts.log (I’m attaching the full log as well). Any ideas?
>
>
>
> Failed to save environment to  (80070057)11/13/2017 4:52:42 PM
> 1772 (0x06EC)
>
> Failed to save the current environment block. This is usually caused by a
> problem with the program. Please check the Microsoft Knowledge Base to
> determine if this is a known issue or contact Microsoft Support Services
> for further assistance.
>
> The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017
> 4:52:42 PM 1772 (0x06EC)
>
> Failed to persist execution state. Error 0x(80070057)11/13/2017
> 4:52:42 PM 1772 (0x06EC)
>
> Failed to save execution state and environment to local hard
> disk  11/13/2017 4:52:42 PM 1772 (0x06EC)
>
> 'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM
> 1904 (0x0770)
>
> Failed to run the action: Run AppSelector.
>
> Class not registered (Error: 80040154; Source: Windows)
> 11/13/2017 4:53:02 PM 1772 (0x06EC)
>
> The execution of the group (Install Operating System) has failed and the
> execution has been aborted. An action failed.
>
> Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM
> 1772 (0x06EC)
>
> Failed to run the last action: Run AppSelector. Execution of task sequence
> failed.
>
> Class not registered (Error: 80040154; Source: Windows)
> 11/13/2017 4:53:03 PM 1772 (0x06EC)
>
>
>
>
>
>
>
> Best Regards,
>
>
>
> Mike Murray
>
> Desktop Engineer/IT Consultant - IT Support Services
>
> California State University, Chico
>
> 530.898.4357 <(530)%20898-4357>
> mmur...@csuchico.edu
>
>
>
> Remember, Chico State will NEVER ask you for your password via email!
>
> For more information about recognizing phishing scam emails go to:
> http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml
> 
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread Mike Murray 
Yes, I generated a site-based media ISO.

From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of John Marcum
Sent: Wednesday, November 15, 2017 10:04 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Are you booting from an iso?



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Mike Murray
Sent: Wednesday, November 15, 2017 10:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Yes, it's one of the first steps before this error. BUT, this is a brand new 
Hyper-V VM, it's not bitlocked.

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of nick aquino
Sent: Wednesday, November 15, 2017 5:55 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

'GetConversionStatus' failed (2150694912) = This drive is locked by BitLocker 
Drive Encryption. You must unlock this drive from Control Panel.

Did you disable bitlocker for the upgrade?

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I'm trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I've 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I'm getting an IP Here are the errors in smsts.log (I'm 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread Blackman, Colin 
Try manually creating a disk partition on drive 0 so the TS has someplace to 
download content to. The drive has no partition on it since it is a new virtual 
disk.
!!!WARNING THIS WILL FORMAT THE DISK!!!

Open a cmd prompt from WinPE and enter the following:

Diskpart
Select disk 0
Clean
Create partition primary
Select Partition 1
Active
Assign
FORMAT FS=NTFS QUICK
EXIT
!!!WARNING THIS WILL FORMAT THE DISK!!!

The other option is to integrate MDT and use the MDT boot image and task 
sequence which has logic to format the drive if there are not partitions found.

Colin Blackman | Sr. Technical Consultant | NTT DATA Services | +1.760.793.3980

NTT DATA Services, LLC

From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Mike Murray
Sent: Wednesday, November 15, 2017 8:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Yes, it’s one of the first steps before this error. BUT, this is a brand new 
Hyper-V VM, it’s not bitlocked.

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of nick aquino
Sent: Wednesday, November 15, 2017 5:55 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

'GetConversionStatus' failed (2150694912) = This drive is locked by BitLocker 
Drive Encryption. You must unlock this drive from Control Panel.

Did you disable bitlocker for the upgrade?

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I’m trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I’ve 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I’m getting an IP Here are the errors in smsts.log (I’m 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml







__
Disclaimer: This email and any attachments are sent in strictest confidence
for the sole use of the addressee and may contain legally privileged,
confidential, and proprietary data. If you are not the intended recipient,
please advise the sender by replying promptly to this email and then delete
and destroy this email and any attachments without any further use,

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread John Marcum 
Are you booting from an iso?



Sensitivity: Confidential between partners
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Mike Murray
Sent: Wednesday, November 15, 2017 10:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

Yes, it's one of the first steps before this error. BUT, this is a brand new 
Hyper-V VM, it's not bitlocked.

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of nick aquino
Sent: Wednesday, November 15, 2017 5:55 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] OSD problem - Failed to save environment to (80070057)

'GetConversionStatus' failed (2150694912) = This drive is locked by BitLocker 
Drive Encryption. You must unlock this drive from Control Panel.

Did you disable bitlocker for the upgrade?

From: listsad...@lists.myitforum.com 
[mailto:listsad...@lists.myitforum.com] On Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I'm trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I've 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I'm getting an IP Here are the errors in smsts.log (I'm 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread Mike Murray 
I can see the drive. Here is my VM:

[cid:image001.png@01D35DEA.B19F8BB0]

From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 8:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I’m trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I’ve 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I’m getting an IP Here are the errors in smsts.log (I’m 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml

[mssms] test2

2017-11-15 Thread Brian Illner 
Test email 2

BRIAN ILLNER | Senior Systems Administrator
864.250.9227
864.679.2537 Fax

Canal Insurance Company
400 East Stone Avenue
Greenville, SC 29601
[cid:image001.jpg@01D35E04.3B4A1FB0]

Visit canalinsurance.com for news and information.

[cid:image002.jpg@01D35E04.3B4A1FB0]
WARNING:  As the information in this transmittal (including attachments, if 
any) may contain confidential, proprietary, or business trade secret 
information, it should only be reviewed by those who are the intended 
recipients.  Unless you are an intended recipient, any review, use, disclosure, 
distribution or copying of this transmittal (or any attachments) is strictly 
prohibited.   If you have received this transmittal in error, please notify me 
immediately by reply email and destroy all copies of the transmittal.  While 
Canal believes this transmittal to be free of virus or other defect, it is the 
responsibility of the recipient to ensure that it is virus free and no 
responsibility is accepted by Canal (or its subsidiaries and affiliates) for 
any loss or damage arising therefrom.

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread nick aquino 
'GetConversionStatus' failed (2150694912) = This drive is locked by BitLocker 
Drive Encryption. You must unlock this drive from Control Panel.

Did you disable bitlocker for the upgrade?

From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I’m trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I’ve 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I’m getting an IP Here are the errors in smsts.log (I’m 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml

[mssms] Endpoint errors

2017-11-15 Thread David Jones 
We do not have Endpoint Protection turned on but we are flooded with these
2 errors in the SMS_ENDPOINT_PROTECTION_MANAGER status log. Both of these
pop up every minute of every day. These errors show up in no other log for
any other tables. We are SCCM 1702 and SQL 2014 sp2CU7 on Server 2012R2.

1. Endpoint Protection Manager failed to generate alerts for type:"31".
Verify that the site database is configured correctly. Error code returned
is:"0x87d20003".

Message ID: 9201

2. Microsoft SQL Server reported SQL message 22105, severity 16:
[42000][22105][Microsoft][SQL Server Native Client 11.0][SQL Server]Change
tracking is not enabled on table 'EP_Malware'. :
spEPGenerateMalwareDetectionAlerts

Message ID 620



I Googled both the error code and the string 'Change tracking is not
enabled on table'. But not a lot of help there that I could detect. I
looked at the table and the Change tracking setting on it is the same as
the other tables, False in both settings.

The error code refers to ADR's There are only 3 ADR's and none have
endpoint definitions.


[image: Inline image 1]

Any suggestions?

Thanks, Dave

RE: [mssms] OSD problem - Failed to save environment to (80070057)

2017-11-15 Thread Daniel Ratliff 
Agreed. We are a full Lenovo shop with over 35+ models and only have 3 drivers 
in our boot image, one of which is VMxNet3 for VMs.

We use 3rd party disk encryption and have the exact error you have when the 
proper filter drivers are not loaded in WinPE. Basically, the disk cant be 
accessed or is in a raw state.

Daniel Ratliff

From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On 
Behalf Of Adam Juelich
Sent: Tuesday, November 14, 2017 11:05 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] OSD problem - Failed to save environment to (80070057)

Which ADK version and which Windows 10 version?  If you enable testing and hit 
F8, do you see the drive?

For what it's worth, I've NEVER had to insert a storage or NIC driver if I've 
kept up with the ADKs.

On Tue, Nov 14, 2017 at 5:30 PM, Mike Murray 
> wrote:
Brand new SCCM server! CM1702. I’m trying to deploy windows 10, the task 
sequence fails. Googling seems to indicate a missing storage driver, but I’ve 
imported mass storage drivers to the boot image. If I hit F8, I can see the 
disk in diskpart. And I’m getting an IP Here are the errors in smsts.log (I’m 
attaching the full log as well). Any ideas?

Failed to save environment to  (80070057)11/13/2017 4:52:42 PM 1772 
(0x06EC)
Failed to save the current environment block. This is usually caused by a 
problem with the program. Please check the Microsoft Knowledge Base to 
determine if this is a known issue or contact Microsoft Support Services for 
further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows) 11/13/2017 
4:52:42 PM 1772 (0x06EC)
Failed to persist execution state. Error 0x(80070057)11/13/2017 4:52:42 
PM 1772 (0x06EC)
Failed to save execution state and environment to local hard disk  
11/13/2017 4:52:42 PM 1772 (0x06EC)
'GetConversionStatus' failed (2150694912)11/13/2017 4:52:43 PM 1904 
(0x0770)
Failed to run the action: Run AppSelector.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:02 PM 1772 (0x06EC)
The execution of the group (Install Operating System) has failed and the 
execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) 11/13/2017 4:53:03 PM 1772 
(0x06EC)
Failed to run the last action: Run AppSelector. Execution of task sequence 
failed.
Class not registered (Error: 80040154; Source: Windows)   
11/13/2017 4:53:03 PM 1772 (0x06EC)



Best Regards,

Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University, Chico
530.898.4357
mmur...@csuchico.edu

Remember, Chico State will NEVER ask you for your password via email!
For more information about recognizing phishing scam emails go to: 
http://www.csuchico.edu/isec/basics/spam-and-phishing.shtml





The information transmitted is intended only for the person or entity to which 
it is addressed
and may contain CONFIDENTIAL material.  If you receive this 
material/information in error,
please contact the sender and delete or destroy the material/information.

Humana Inc. and its subsidiaries comply with applicable Federal civil rights 
laws and
do not discriminate on the basis of race, color, national origin, age, 
disability or
sex. Humana Inc. and its subsidiaries do not exclude people or treat them 
differently
because of race, color, national origin, age, disability or sex.

English: ATTENTION: If you do not speak English, language assistance services, 
free
of charge, are available to you. Call 1‐877‐320‐1235 (TTY: 711).

Español (Spanish): ATENCIÓN: Si habla español, tiene a su disposición servicios
gratuitos de asistencia lingüística. Llame al 1‐877‐320‐1235 (TTY: 711).

繁體中文(Chinese)：注意：如果您使用繁體中文，您可以免費獲得語言援助
服務。請致電 1‐877‐320‐1235 (TTY: 711)。

Kreyòl Ayisyen (Haitian Creole): ATANSION: Si w pale Kreyòl Ayisyen, gen sèvis 
èd
pou lang ki disponib gratis pou ou. Rele 1‐877‐320‐1235 (TTY: 711).

Polski (Polish): UWAGA: Jeżeli mówisz po polsku, możesz skorzystać z bezpłatnej
pomocy językowej. Zadzwoń pod numer 1‐877‐320‐1235 (TTY: 711).

한국어 (Korean): 주의: 한국어를 사용하시는 경우, 언어 지원 서비스를 무료로
이용하실 수 있습니다. 1‐877‐320‐1235 (TTY: 711)번으로 전화해 주십시오.