Re: WAN Ericsson F3507g
On Thu, 2008-11-06 at 15:41 -0700, James Ward wrote: Thanks Dan. Here is the output: NetworkManager: info Activation (ttyACM0) starting connection 'Auto GSM network connection' NetworkManager: info (ttyACM0): device state change: 3 - 4 NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started... NetworkManager: debug [1226010840.735911] nm_serial_device_open(): (ttyACM0) opening device... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: debug [1226010840.841058] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.869797] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.880689] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 This was fixed on 2008-10-26 in r4222. Dan ERROR ' NetworkManager: WARN init_done(): Modem initialization failed NetworkManager: info (ttyACM0): device state change: 4 - 9 NetworkManager: debug [1226010840.880892] nm_serial_device_close(): Closing device 'ttyACM0' NetworkManager: info Marking connection 'Auto GSM network connection' invalid. NetworkManager: info Activation (ttyACM0) failed. NetworkManager: info (ttyACM0): device state change: 9 - 3 NetworkManager: info (ttyACM0): deactivating device (reason: 0). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx = 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx = 0' failed The light on my laptop indicating that the device is on, never turned on using NM. But if I do: cu -l /dev/ttyACM0 AT+CFUN=1 Then the light does come on. I have 0.7~~svn20081018t105859-0ubuntu2~nm4 from the PPA on Intrepid. Thanks for your help. -James On Thu, 2008-11-06 at 07:35 -0500, Dan Williams wrote: On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote: Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 NetworkManager does turn the card on with CFUN=1 already. I'll need serial debug logging enabled to figure out what's going on with your card. Stop NM, then as root run it like: NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon and try a connection. Attach the output of NM so we can figure out what's actually going wrong here. Dan My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: WAN Ericsson F3507g
Sorry for stepping in again but... The error is because NM normally send ATZ. The F3507g module doesn't understand this command, it is using ATF instead for reset. James Ward wrote: Thanks Dan. Here is the output: NetworkManager: info Activation (ttyACM0) starting connection 'Auto GSM network connection' NetworkManager: info (ttyACM0): device state change: 3 - 4 NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started... NetworkManager: debug [1226010840.735911] nm_serial_device_open(): (ttyACM0) opening device... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: debug [1226010840.841058] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.869797] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.880689] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 ERROR ' NetworkManager: WARN init_done(): Modem initialization failed NetworkManager: info (ttyACM0): device state change: 4 - 9 NetworkManager: debug [1226010840.880892] nm_serial_device_close(): Closing device 'ttyACM0' NetworkManager: info Marking connection 'Auto GSM network connection' invalid. NetworkManager: info Activation (ttyACM0) failed. NetworkManager: info (ttyACM0): device state change: 9 - 3 NetworkManager: info (ttyACM0): deactivating device (reason: 0). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx = 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx = 0' failed The light on my laptop indicating that the device is on, never turned on using NM. But if I do: cu -l /dev/ttyACM0 AT+CFUN=1 Then the light does come on. I have 0.7~~svn20081018t105859-0ubuntu2~nm4 from the PPA on Intrepid. Thanks for your help. -James On Thu, 2008-11-06 at 07:35 -0500, Dan Williams wrote: On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote: Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 NetworkManager does turn the card on with CFUN=1 already. I'll need serial debug logging enabled to figure out what's going on with your card. Stop NM, then as root run it like: NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon and try a connection. Attach the output of NM so we can figure out what's actually going wrong here. Dan My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: WAN Ericsson F3507g
Hello James, Ok, I'll try describe a process here to get this modem running. First, the thread you point to could make it work with a ppp connection. That is not the way to do it though, since it has a much more efficient way to do communication. Here is a alternative howto: 1. Patch your kernel with this patch: http://kerneltrap.org/mailarchive/linux-net/2008/10/29/3846534 2. After reboot with this new kernel, you should see like: dmesg: [ 20.122239] cdc_acm 5-8:1.1: usb_probe_interface [ 20.122243] cdc_acm 5-8:1.1: usb_probe_interface - got id [ 20.122322] cdc_acm 5-8:1.1: ttyACM0: USB ACM device [ 20.124354] cdc_acm 5-8:1.3: usb_probe_interface [ 20.124357] cdc_acm 5-8:1.3: usb_probe_interface - got id [ 20.124438] cdc_acm 5-8:1.3: ttyACM1: USB ACM device [ 20.127392] cdc_acm 5-8:1.9: usb_probe_interface [ 20.127395] cdc_acm 5-8:1.9: usb_probe_interface - got id [ 20.127481] cdc_acm 5-8:1.9: ttyACM2: USB ACM device [ 20.134318] usbcore: registered new interface driver cdc_acm [ 20.134322] drivers/usb/class/cdc-acm.c: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 20.271221] usbcore: registered new interface driver cdc_ether [ 20.310117] mbm 5-8:1.7: usb_probe_interface [ 20.310121] mbm 5-8:1.7: usb_probe_interface - got id [ 20.329548] mbm 5-8:1.7: status ep7in, 8 bytes period 7 [ 20.329740] mb0: register 'mbm' at usb-:00:1d.7-8, MBM Mobile WAN Device, 02:80:37:ec:02:00 [ 20.329754] usbcore: registered new interface driver mbm You should also see a interface mb0 when you do ifconfig for example. 3. You can now test this manually, I mean without NetworkManager. Just to see that the driver part is ok. 3.1 Open /dev/ttyACM[0,1 or 2] in your favorite terminal emulator, this will give you an interface to do AT commands in. 3.2 You need a AT sequence like this to bring up your modem: 3.2.1 ATF 3.2.2 AT+CFUN=1 3.2.3 AT*EIAC=1 3.2.4 AT*EIAPSW=1,1,your APN here 3.2.5 AT*ENAP=1,1 3.3 Now the connection should be up and you use dhclient to get an IP on mb0 like dhclient mb0 or similar. 3.4 Time to start surf and read mails! :-) 4. To get NM to use this module, you currently need to work with the sources of NetworkManager and modemmanager. This is so far work in progress and I'm not sure when the distributions will pick these things up. Best regards, Per James Ward wrote: Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: WAN Ericsson F3507g
On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote: Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 NetworkManager does turn the card on with CFUN=1 already. I'll need serial debug logging enabled to figure out what's going on with your card. Stop NM, then as root run it like: NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon and try a connection. Attach the output of NM so we can figure out what's actually going wrong here. Dan My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: WAN Ericsson F3507g
Thanks Dan. Here is the output: NetworkManager: info Activation (ttyACM0) starting connection 'Auto GSM network connection' NetworkManager: info (ttyACM0): device state change: 3 - 4 NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started... NetworkManager: debug [1226010840.735911] nm_serial_device_open(): (ttyACM0) opening device... NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: debug [1226010840.841058] nm_serial_debug(): Sending: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.869797] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 ' NetworkManager: debug [1226010840.880689] nm_serial_debug(): Got: 'ATZ E0 V1 X4 C1 +FCLASS=0 ERROR ' NetworkManager: WARN init_done(): Modem initialization failed NetworkManager: info (ttyACM0): device state change: 4 - 9 NetworkManager: debug [1226010840.880892] nm_serial_device_close(): Closing device 'ttyACM0' NetworkManager: info Marking connection 'Auto GSM network connection' invalid. NetworkManager: info Activation (ttyACM0) failed. NetworkManager: info (ttyACM0): device state change: 9 - 3 NetworkManager: info (ttyACM0): deactivating device (reason: 0). NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx = 0' failed NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx = 0' failed The light on my laptop indicating that the device is on, never turned on using NM. But if I do: cu -l /dev/ttyACM0 AT+CFUN=1 Then the light does come on. I have 0.7~~svn20081018t105859-0ubuntu2~nm4 from the PPA on Intrepid. Thanks for your help. -James On Thu, 2008-11-06 at 07:35 -0500, Dan Williams wrote: On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote: Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 NetworkManager does turn the card on with CFUN=1 already. I'll need serial debug logging enabled to figure out what's going on with your card. Stop NM, then as root run it like: NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon and try a connection. Attach the output of NM so we can figure out what's actually going wrong here. Dan My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
WAN Ericsson F3507g
Hi, I just recently upgraded to the Lenovo W500 laptop which has a built-in Ericsson F2507g WAN card. Unfortunately I can't get this new card to work with NM because it needs to be turned on first. There is a thread about how to do this manually on Ubuntu: http://ubuntuforums.org/showthread.php?t=934013 My sim card doesn't require a password like the newer ones so this should be pretty simple. But I can't seem to make it work. I'm using the Ubuntu NM PPA. Any ideas? Thanks. -James ___ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
