Re: [NTG-context] mistake in usemodule[letter]
Hi Jessica, Try this: \usemodule[m][letter] or \usemodule[m-letter] I had a similar problem some time ago. It seems that a plainTeX document named 'letter.tex' is loaded in lieu of m-letter.tex. It is against Contex-philosophy to explicitly state the prefixes, but it may be needed now and again. Regards, Robert Op Di, 4 oktober, 2005 7:55 am schreef Jessica Holle: Hi, everytime when I use the module letter I get a mistake: rzvlabwks:/home/jessi # tra jessi.tex TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 fixing engine variable : pdfetex executable : pdfetex format : cont-en inputfile : jessi output : standard interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) \write18 enabled. (/usr/local/teTeX/share/texmf-local/web2c/natural.tcx) entering extended mode (./jessi.tex ConTeXt ver: 2005.08.15 fmt: 2005.8.17 int: english mes: english language: language en is active protectionstate 0 system : cont-new loaded (/usr/local/teTeX/share/texmf-local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex color : palette rollover is available ) system : cont-old loaded (/usr/local/teTeX/share/texmf-local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/teTeX/share/texmf-local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/usr/local/teTeX/share/texmf-local/tex/context/user/cont-sys.tex (/usr/local/teTeX/share/texmf-local/tex/context/base/type-exa.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-dis.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-akb.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-exa.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-dis.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf-local/tex/context/base/type-akb.tex)) bodyfont: 12pt rm is loaded language: patterns nl-texnansi:texnansi-1-2:2 nl-ec:ec-2-2:2 fr- texnansi:texnansi-3-2:2 fr-ec:ec-4-2:2 de-texnansi:texnansi-5-2:2 de-e c:ec-6-2:2 it-texnansi:texnansi-7-2:2 it-ec:ec-8-2:2 pt-texnansi:texna nsi-9-2:2 pt-ec:ec-10-2:2 hr-ec:ec-11-2:2 pl-pl0:pl0-12-2:2 pl-ec:e c-13-2:2 cz-il2:il2-14-2:2 cz-ec:ec-15-2:2 sk-il2:il2-16-2:2 sk-ec: ec-17-2:2 sl-il2:il2-18-2:2 sl-ec:ec-19-2:2 en-ec:ec-21-2:2 da-ec:e c-22-2:2 sv-ec:ec-23-2:2 af-ec:ec-24-2:2 no-ec:ec-25-2:2 deo-ec:ec- 26-2:2 uk-ec:ec-27-2:2 us-ec:ec-28-2:2 es-ec:ec-29-2:2 ca-ec:ec-30 -2:2 la-ec:ec-31-2:2 ro-ec:ec-32-2:2 tr-ec:ec-33-2:2 fi-ec:ec-35-2 :2 hu-ec:ec-36-2:2 loaded specials: tex,postscript,rokicki loaded system : jessi.top loaded (./jessi.top) specials: loading definition file tpd (/usr/local/teTeX/share/texmf-local/tex/context/base/spec-tpd.tex specials: loading definition file fdf (/usr/local/teTeX/share/texmf-local/tex/context/base/spec-fdf.tex) specials: fdf loaded ) specials: fdf,tpd loaded system : module letter loaded (/usr/local/teTeX/share/texmf-dist/tex/plain/base/letter.tex ! Undefined control sequence. l.13 \nopagenumbers my document looks like this: \setupoutput[pdftex] \usemodule[letter] \starttext hallo \stoptext Do I something wrong or does I have a mistake in my installation? ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
function plotting (was: Re: [NTG-context] Q: about \externalfile from metafun-p.pdf)
On Mon 03.10.2005 19:26, Christopher Creutzig wrote: MetaPost is not really a function plotter. So, yes, you have to use some sort of loop, although there may be some predefined macros hiding them. Is there a better way in ConTeXt/tex for this?! Should i use some external Programms for this? al ;-) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] ISO Latin 2 input under the new ConTeXt
Good evening. Many thanks to all of you that helped me to install teTeX 3.0. I found that I can really use SuSE 9.3 rpms under my SuSE 9.2, which quite surprised me. (I can't use Mr. Hagen's minimumdistribution, because there is no MetaFont in it, and I still use some bitmapped fonts, e.g. Concrete Math). Now I have to solve the last (I hope so) problem: The Czech encoding. I have all my input files in ISO Latin 2 encoding. It was no problem up to now because I used fonts with IL2 encoding. What shoud I do now the new LM fonts? (BTW, is it all right that I have to include \loadmapfile[psclean.map] in all my documents? LM fonts are not preloaded, and I can't find in teTeX 3.0 pdftex.conf to include it.) (In the last two years I missed all font-related changes in ConTeXt. What manuals should I read to understand how to use ConTeXt properly?) With many thanks Michal Kvasnicka P.S. And by the way, in the future I may need to switch all my inputs into UTF8. How can I typeset files like that in the ConTeXt? Many thanks. ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: function plotting
Alexander Lazic wrote: On Mon 03.10.2005 19:26, Christopher Creutzig wrote: MetaPost is not really a function plotter. So, yes, you have to use some sort of loop, although there may be some predefined macros hiding them. Is there a better way in ConTeXt/tex for this?! Should i use some external Programms for this? Not really, that causes all sorts of problems when trying to get the same font all over the place etc. But you might be interested (assuming you can read or at least decipher French) in the pages at http://melusine.eu.org/syracuse/metapost/galeries/ – complete code included. (Those are the predefined macros I was talking about above.) I guess something like http://melusine.eu.org/syracuse/metapost/galeries/courbes02/07riemann-img.html should wet your appetite. :-) Regards, Christopher ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ISO Latin 2 input under the new ConTeXt
Mojca Miklavec wrote: There are two things: input encoding or regime (\enableregime[utf] inyour case) and font Many thanks, \enableregime did what I needed. But I still have some minor questions: 1) Where should I put \loadmapfile[psclean.map]? (I can't include it in pdftex.cnf, since there is none under my new teTeX 3.0 in SuSE.) 2) Is it a goold idea to place in the same file \enableregime[il2] if almost all my documents are typed in this encoding? 3) What is the native ConTeXt font encoding? If I use many different fonts (most being reencoded via virtual fonts into IL2 encoding), should I reencode them into the native ConTeXt font encoding (whatever it is), or can I make ConTeXt work with a different font encoding, perhaps different for different fonts? How? How? 4) What documentations for fonts in ConTeXt should I read, and in what order? And I have one (I hope) little plea to Mr. Hagen: Please, can you add MetaFont to your minimum TeX installation? I would like to use it instead of teTeX because it is more flexible. But I still use heavily some MetaFont bitmapped fonts. Many thanks anyway. Your thankful Michal Kvasnicka ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: function plotting (was: Re: [NTG-context] Q: about \externalfile from metafun-p.pdf)
Alexander Lazic wrote: On Mon 03.10.2005 19:26, Christopher Creutzig wrote: MetaPost is not really a function plotter. So, yes, you have to use some sort of loop, although there may be some predefined macros hiding them. Is there a better way in ConTeXt/tex for this?! Should i use some external Programms for this? al ;-) I use gnuplot which makes graphs of superb visual quality and has extensive support for many different function manipulations and weird stuff that you want to do with it. I do something like: set terminal latex set output file.tex set title '\bf My wonderful function $sin(\omega t)$' set xlabel '$t\ \rm[s]$' set ylabel '$A$' plot sin(x) and then \input file inside of the main LaTeX file. Gnuplot cannot make output in ConTeXt (yet), but perhaps you can include the resulting PDFs in your ConTeXt source. (Gnuplot is one of the very few examples where I still use LaTeX.) You can also output the (ConTeXt-friendly) metapost (with set terminal), but you lose on quality. Mojca ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Re: function plotting
On Die 04.10.2005 18:07, Christopher Creutzig wrote: But you might be interested (assuming you can read or at least decipher French) in the pages at http://melusine.eu.org/syracuse/metapost/galeries/ ? complete code included. (Those are the predefined macros I was talking about above.) Thanx for that link looks very nice ;-) greetings al ;-) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: function plotting (was: Re: [NTG-context] Q: about \externalfile from metafun-p.pdf)
On Die 04.10.2005 19:48, Mojca Miklavec wrote: I use gnuplot which makes graphs of superb visual quality and has extensive support for many different function manipulations and weird stuff that you want to do with it. I have also think on gnuplot, but wasn't sure that i can use the ps/pdf into my context doc. and then \input file inside of the main LaTeX file. Gnuplot cannot make output in ConTeXt (yet), but perhaps you can include the resulting PDFs in your ConTeXt source. (Gnuplot is one of the very few examples where I still use LaTeX.) You can also output the (ConTeXt-friendly) metapost (with set terminal), but you lose on quality. Well i will also try with gnuplot. How much bad is 'lose quality' in %? greetings al ;-) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: function plotting
On Tue, 4 Oct 2005, Alexander Lazic wrote:
On Mon 03.10.2005 19:26, Christopher Creutzig wrote:
MetaPost is not really a function plotter. So, yes, you have to use
some sort of loop, although there may be some predefined macros hiding
them.
Is there a better way in ConTeXt/tex for this?!
You could also try PSTricks:
\usemodule[pstric]
\starttext
\startPSTRICKS
\psplot[plotpoints=100]{0}{1}{x 360 mul sin}
\stopPSTRICKS
\stoptext
Cheers, Peter
--
http://pmrb.free.fr/contact/
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Bib-module: crossreferences
Hi Taco,
Are crossreferences supposed to work in the new bib module? According to the
Latex companion pp. 404ff. a crossreference can be made in an @inbook to a
@book provided the @inbook precedes the @book in a .bib-file. If a @book is
referenced at least two times by an @inbook, an entry for the @book is
included in the reference list.
In the new bibtex-module for Context, the crossreferences are resolved
properly, I think, but the crossreferenced entry is not yet included in the
reference list.
I \cite[gould:1979] and \cite[rioch:1979], but lawrence:1979 doesn't appear
in the reference list.
Cheers, Roelof
@inbook{gould:1979,
author = Gould, Laurence J.,
crossref = lawrence:1979,
title = Men and Women at Work: A Group Relations Conference on Person and
Role,
note = See also \cite[rioch:1979].,
pages = 111--122 }
@inbook{rioch:1979,
author = Rioch, Margaret J.,
crossref = lawrence:1979,
title = The A.K. Rice Group Relations Conferences as a Reflection of
Society,
pages = 53--68 }
@book{lawrence:1979,
editor = Lawrence, W. Gordon,
title = Exploring Individual and Organizational Boundaries.,
publisher = John Wiley \ Sons Ltd,
year = 1979}
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ISO Latin 2 input under the new ConTeXt
Michal Kvasnička wrote: Mojca Miklavec wrote: There are two things: input encoding or regime (\enableregime[utf] inyour case) and font Many thanks, \enableregime did what I needed. But I still have some minor questions: 1) Where should I put \loadmapfile[psclean.map]? (I can't include it in pdftex.cnf, since there is none under my new teTeX 3.0 in SuSE.) For standard fonts you do not need to include any map file. If you really need to incorporate something to format, put it to cont-(cz|en).tex or look to the context.tex. 2) Is it a goold idea to place in the same file \enableregime[il2] if almost all my documents are typed in this encoding? My Czech setup for: format: cont-en input regime: il2 font|hyphenation encoding: ec \enableregime[il2] \mainlanguage[cz] \loadmapfile[lm.map] 3) What is the native ConTeXt font encoding? If I use many different IFAIK there is no native font encoding since ConTeXt tries to maintain many languages with different hyphenation patterns needed to encode. Czech hyphenation pattern for Czech language is in ec encoding in cont-en format. fonts (most being reencoded via virtual fonts into IL2 encoding), should I reencode them into the native ConTeXt font encoding (whatever it is), or can I make ConTeXt work with a different font encoding, perhaps different for different fonts? How? How? 4) What documentations for fonts in ConTeXt should I read, and in what order? Try to look at http://wiki.contextgarden.net Vit P.S. Czech support in ConTeXt is far from optimal; after I will finnish the real big publication I will summarize it. No time for that now I am a month late. And I have one (I hope) little plea to Mr. Hagen: Please, can you add MetaFont to your minimum TeX installation? I would like to use it instead of teTeX because it is more flexible. But I still use heavily some MetaFont bitmapped fonts. Many thanks anyway. Your thankful Michal Kvasnicka ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context -- === Ing. Vít Zýka, Ph.D. TYPOkvítek database publishing databazove publikovani data maintaining and typesetting in typographic quality priprava dat a jejich sazba v typograficke kvalite tel.: (+420) 777 198 189 www: http://typokvitek.com === ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Re: function plotting
Hi,
On Die 04.10.2005 21:14, Peter Münster wrote:
You could also try PSTricks:
\usemodule[pstric]
\starttext
\startPSTRICKS
\psplot[plotpoints=100]{0}{1}{x 360 mul sin}
\stopPSTRICKS
\stoptext
Thanx i have try an get:
figures : figure pstest-texapp can not be found
but there is the file: pstest-texapp.tex
You can get the output and some otherfiles from:
http://www.none.at/tex/
Greetings
al ;-)
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Help with more the one figures
Hi, today i have try to use two figures generated with gnuplot. When i have the png-file generated then i get both figures in my pdf?! I'am a little bit confused about this! After: gnuplot first.gp ---first.gp set terminal mp color set output figure.mp #set terminal png large size 1024x768 #set output figure.png set xrange [-10:10] set yrange [] writeback plot sin(x) set yrange restore replot x/2 --- mpost figure.mp texexec --pdf testi.tex ---testi.tex \setupcolors[state=start] \starttext \externalfigure[figure.0] \externalfigure[figure.1] \stoptext --- --- texexec --version TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 tex : pdfeTeX, 3.141592-1.30.3-2.2 (Web2C 7.5.5) context : ver: 2005.08.31 cont-en : ver: 2005.08.31 fmt: 2005.10.4 mes: english --- mpost --version MetaPost 0.901 (Web2C 7.5.5) kpathsea version 3.5.5 Copyright 2005 ATT Bell Laboratories. Kpathsea is copyright 2005 Karl Berry and Olaf Weber. There is NO warranty. Redistribution of this software is covered by the terms of both the MetaPost copyright and the Lesser GNU General Public License. For more information about these matters, see the file named COPYING and the MetaPost source. Primary author of MetaPost: John Hobby. Kpathsea written by Karl Berry, Olaf Weber, and others. --- Greetings al ;-) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Re: function plotting
Mojca Miklavec wrote: and then \input file inside of the main LaTeX file. Gnuplot cannot make output in ConTeXt (yet), but perhaps you can include the Since afaik ConTeXt does not have an equivalent of LaTeX's picture environment, I don't see much point in teaching gnuplot some sort of ConTeXt output. I'm no gnuplot expert, but my guess is that tweaking the metapost prologues and some minor code tweaks would probably be the easiest way to go. examples where I still use LaTeX.) You can also output the (ConTeXt-friendly) metapost (with set terminal), but you lose on quality. In what respect do you lose quality? Christopher ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
