Re: [NTG-context] Modes in tables
Just use a empty line before the table.
Wolfgang
Jan Willem Flamma schrieb am 10.09.18 um 11:49:
Thank you again Wolfgang.
Yet another question:
I like to get rid of the \par and tried integrating it into the tablesetups
somehow. I've tried adding things like before={\blank} and before\par but
couldn’t get it to work.
\starttext
\startsetups [tablesetups]
\setupTABLE [start] [frame=off,rulethickness=0pt,offset=0pt]
\setupTABLE [column] [1] [width=6cm,align=flushleft]
\setupTABLE [column] [2] [width=3cm,align=flushleft]
\stopsetups
Calculate the hydrostatic pressure of the following fluid.
\par% <-- can I get rid of this par?
\bTABLE [setups=tablesetups]
\bTR
\bTD Well depth \eTD
\bTD 10100 ft \eTD
\bTD 3100 m \eTD
\eTR
\bTR
\bTD Fluid density \eTD
\bTD 9.0 ppg\eTD
\bTD 1.08 kg/l \eTD
\eTR
\eTABLE
\stoptext
On 7 Sep 2018, at 20:19, Wolfgang Schuster
wrote:
Jan Willem Flamma schrieb am 07.09.18 um 20:01:
Thank you Wolfgang.
When comparing the results between tabulate and TABLE, I noticed some different
results in formatting.
1. When using TABLE the table text is slightly shifted to the right. My initial
guess was that this is due to the frame thickness but setting rulethickness=
0pt did not solve this.
How can I get the text in the table to align with the regular text?
In a natural table each cell acts like \framed where you have a offset value on
each side, to get rid of it set offset to 0pt.
\setupTABLE [start] [frame=off,rulethickness=0pt,offset=0pt]
2. In both cases column widths of 6cm and 3 cm have been set. Yet, the results
show a difference in column width (not sure which one is correct)
Tabulate adds extra space between the columns but it can be disabled.
\starttabulate[|lw(6cm)j0|i0lw(3cm)|p|]
3. The vertical space between the regular text and the start of the table
varies. It is larger when using tabulate.
Tabulate add by default a \blank before and after the table which can be
disabled.
\starttabulate [...] [before=,after=]
or
\setuptabulate [before=,after=]
4. The vertical space between the lines in the table text also varies. It is
larger when using TABLE.
Setting offset to 0pt reduces the vertical space in natural table but there
will always be differences between different table types.
Wolfgang
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Modes in tables
Thank you again Wolfgang.
Yet another question:
I like to get rid of the \par and tried integrating it into the tablesetups
somehow. I've tried adding things like before={\blank} and before\par but
couldn’t get it to work.
\starttext
\startsetups [tablesetups]
\setupTABLE [start] [frame=off,rulethickness=0pt,offset=0pt]
\setupTABLE [column] [1] [width=6cm,align=flushleft]
\setupTABLE [column] [2] [width=3cm,align=flushleft]
\stopsetups
Calculate the hydrostatic pressure of the following fluid.
\par% <-- can I get rid of this par?
\bTABLE [setups=tablesetups]
\bTR
\bTD Well depth \eTD
\bTD 10100 ft \eTD
\bTD 3100 m \eTD
\eTR
\bTR
\bTD Fluid density \eTD
\bTD 9.0 ppg\eTD
\bTD 1.08 kg/l \eTD
\eTR
\eTABLE
\stoptext
> On 7 Sep 2018, at 20:19, Wolfgang Schuster
> wrote:
>
>
>
> Jan Willem Flamma schrieb am 07.09.18 um 20:01:
>> Thank you Wolfgang.
>>
>> When comparing the results between tabulate and TABLE, I noticed some
>> different results in formatting.
>>
>> 1. When using TABLE the table text is slightly shifted to the right. My
>> initial guess was that this is due to the frame thickness but setting
>> rulethickness= 0pt did not solve this.
>> How can I get the text in the table to align with the regular text?
>
> In a natural table each cell acts like \framed where you have a offset value
> on each side, to get rid of it set offset to 0pt.
>
> \setupTABLE [start] [frame=off,rulethickness=0pt,offset=0pt]
>
>> 2. In both cases column widths of 6cm and 3 cm have been set. Yet, the
>> results show a difference in column width (not sure which one is correct)
>
> Tabulate adds extra space between the columns but it can be disabled.
>
> \starttabulate[|lw(6cm)j0|i0lw(3cm)|p|]
>
>> 3. The vertical space between the regular text and the start of the table
>> varies. It is larger when using tabulate.
>
> Tabulate add by default a \blank before and after the table which can be
> disabled.
>
> \starttabulate [...] [before=,after=]
>
> or
>
> \setuptabulate [before=,after=]
>
>> 4. The vertical space between the lines in the table text also varies. It is
>> larger when using TABLE.
>
> Setting offset to 0pt reduces the vertical space in natural table but there
> will always be differences between different table types.
>
>
> Wolfgang
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Modes in tables
Jan Willem Flamma schrieb am 07.09.18 um 20:01: Thank you Wolfgang. When comparing the results between tabulate and TABLE, I noticed some different results in formatting. 1. When using TABLE the table text is slightly shifted to the right. My initial guess was that this is due to the frame thickness but setting rulethickness= 0pt did not solve this. How can I get the text in the table to align with the regular text? In a natural table each cell acts like \framed where you have a offset value on each side, to get rid of it set offset to 0pt. \setupTABLE [start] [frame=off,rulethickness=0pt,offset=0pt] 2. In both cases column widths of 6cm and 3 cm have been set. Yet, the results show a difference in column width (not sure which one is correct) Tabulate adds extra space between the columns but it can be disabled. \starttabulate[|lw(6cm)j0|i0lw(3cm)|p|] 3. The vertical space between the regular text and the start of the table varies. It is larger when using tabulate. Tabulate add by default a \blank before and after the table which can be disabled. \starttabulate [...] [before=,after=] or \setuptabulate [before=,after=] 4. The vertical space between the lines in the table text also varies. It is larger when using TABLE. Setting offset to 0pt reduces the vertical space in natural table but there will always be differences between different table types. Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] Modes in tables
Thank you Wolfgang.
When comparing the results between tabulate and TABLE, I noticed some different
results in formatting.
1. When using TABLE the table text is slightly shifted to the right. My initial
guess was that this is due to the frame thickness but setting rulethickness=
0pt did not solve this.
How can I get the text in the table to align with the regular text?
2. In both cases column widths of 6cm and 3 cm have been set. Yet, the results
show a difference in column width (not sure which one is correct)
3. The vertical space between the regular text and the start of the table
varies. It is larger when using tabulate.
4. The vertical space between the lines in the table text also varies. It is
larger when using TABLE.
(I left out the modes in MWE below because I don’t think it is relevant here.)
\starttext
\setupwhitespace[big]
\startsetups [tablesetups]
\setupTABLE [start] [frame=off, rulethickness=0pt]
\setupTABLE [column] [1] [width=6cm,align=flushleft]
\setupTABLE [column] [2] [width=3cm,align=flushleft]
\stopsetups
Calculate the hydrostatic pressure of the following fluid.
\par
\bTABLE [setups=tablesetups]
\bTR
\bTD Well depth \eTD
\bTD 10100 ft \eTD
\bTD 3100 m \eTD
\eTR
\bTR
\bTD Fluid density \eTD
\bTD 9.0 ppg\eTD
\bTD 1.08 kg/l \eTD
\eTR
\eTABLE
Calculate the hydrostatic pressure of the following fluid.
\starttabulate[|lw(6cm)|lw(3cm)|p|]
\NC Well depth \NC 10100 ft\NC 3100 m \NC \NR
\NC Fluid density \NC 9.0 ppg \NC 1.08 kg/l \NC \NR
\stoptabulate
\stoptext
> On 6 Sep 2018, at 18:53, Wolfgang Schuster
> wrote:
>
> You can’t do this with tabulate but it’s possible with natural tables.
>
> %\enablemode [BL]
>
> \starttext
>
> \startsetups [tablesetups]
> \setupTABLE [start] [frame=off]
> \setupTABLE [column] [1] [width=6cm,align=flushleft]
> \setupTABLE [column] [2] [width=2cm,align=flushleft]
> \stopsetups
>
> \bTABLE [setups=tablesetups]
> \bTR
> \bTD Well depth \eTD
> \bTD 10100 ft \eTD
> \startmode [BL] \bTD \unit{3100 meter} \eTD \stopmode
> \eTR
> \bTR
> \bTD Fluid density \eTD
> \bTD 9.0 ppg \eTD
> \startmode [BL] \bTD \unit{1.08 kilogram per liter} \eTD \stopmode
> \eTR
> \eTABLE
>
> \stoptext
>
> Wolfgang
>
>
> Jan Willem Flamma schrieb am 06.09.18 um 11:44:
>> Dear list members
>>
>> I would like to disable to third column in the question when mode BL is not
>> enabled.
>>
>> When mode BL is enabled (using the toggle), the third column should of
>> course appear again.
>>
>> How can I achieve this?
>>
>> Regards,
>> Jan Willem
>>
>>
>> MWE:
>>
>> \starttext
>>
>> %Toggles
>> %\enablemode[BL]
>>
>> \defineblock[question]
>> \defineblock[answer]
>>
>> \hideblocks[question]
>> \hideblocks[answer]
>>
>> \defineenumeration
>> [question]
>> [text=Question,
>> after={\blank[2*big]},
>> inbetween={\blank[nowhite]},
>> way=bychapter,
>> prefixsegments=chapter,
>> prefix=yes]
>>
>> \defineenumeration
>> [answer]
>> [counter=answer,
>> text=,
>> width=,
>> before={\blank[nowhite]},
>> after={\blank[nowhite]},
>> indenting=no,
>> titledistance=1cm,
>> location=inmargin,
>> alternative=left,
>> headstyle=,
>> way=bychapter,
>> prefixsegments=chapter,
>> prefix=yes]
>>\beginquestion
>> \startquestion
>> Calculate the hydrostatic pressure of the following fluid.
>> \starttabulate[|lw(6cm)|lw(3cm)|\doifmode{BL}{p|}]
>> \NC Well depth \NC 10100 ft\doifmode{BL}{\NC 3100 m}
>> \NC \NR
>> \NC Fluid density\NC 9.0 ppg \doifmode{BL}{\NC 1.08
>> kg/l}\NC \NR
>> \stoptabulate
>> \stopquestion
>> \endquestion
>> \beginanswer
>> \startanswer
>> 4726 psi\doifmode{BL}{ / 328 bar}
>> \stopanswer
>> \endanswer
>>
>>
>> \startsection[title=Questions]
>> \useblocks[question]
>> \startsubsubsection[title=Answers]
>> \useblocks[answer]
>> \stopsubsubsection
>> \stopsection
>>
>> \stoptext
>> ___
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
>> archive : https://bitbucket.org/phg/context-mirror/commits/
>> wiki : http://contextgarden.net
>> ___
>
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl /
Re: [NTG-context] Modes in tables
You can’t do this with tabulate but it’s possible with natural tables.
%\enablemode [BL]
\starttext
\startsetups [tablesetups]
\setupTABLE [start] [frame=off]
\setupTABLE [column] [1] [width=6cm,align=flushleft]
\setupTABLE [column] [2] [width=2cm,align=flushleft]
\stopsetups
\bTABLE [setups=tablesetups]
\bTR
\bTD Well depth \eTD
\bTD 10100 ft \eTD
\startmode [BL] \bTD \unit{3100 meter} \eTD \stopmode
\eTR
\bTR
\bTD Fluid density \eTD
\bTD 9.0 ppg \eTD
\startmode [BL] \bTD \unit{1.08 kilogram per liter} \eTD \stopmode
\eTR
\eTABLE
\stoptext
Wolfgang
Jan Willem Flamma schrieb am 06.09.18 um 11:44:
Dear list members
I would like to disable to third column in the question when mode BL is not
enabled.
When mode BL is enabled (using the toggle), the third column should of course
appear again.
How can I achieve this?
Regards,
Jan Willem
MWE:
\starttext
%Toggles
%\enablemode[BL]
\defineblock[question]
\defineblock[answer]
\hideblocks[question]
\hideblocks[answer]
\defineenumeration
[question]
[text=Question,
after={\blank[2*big]},
inbetween={\blank[nowhite]},
way=bychapter,
prefixsegments=chapter,
prefix=yes]
\defineenumeration
[answer]
[counter=answer,
text=,
width=,
before={\blank[nowhite]},
after={\blank[nowhite]},
indenting=no,
titledistance=1cm,
location=inmargin,
alternative=left,
headstyle=,
way=bychapter,
prefixsegments=chapter,
prefix=yes]
\beginquestion
\startquestion
Calculate the hydrostatic pressure of the following fluid.
\starttabulate[|lw(6cm)|lw(3cm)|\doifmode{BL}{p|}]
\NC Well depth \NC 10100 ft\doifmode{BL}{\NC 3100 m}
\NC \NR
\NC Fluid density\NC 9.0 ppg \doifmode{BL}{\NC 1.08 kg/l}
\NC \NR
\stoptabulate
\stopquestion
\endquestion
\beginanswer
\startanswer
4726 psi\doifmode{BL}{ / 328 bar}
\stopanswer
\endanswer
\startsection[title=Questions]
\useblocks[question]
\startsubsubsection[title=Answers]
\useblocks[answer]
\stopsubsubsection
\stopsection
\stoptext
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
[NTG-context] Modes in tables
Dear list members
I would like to disable to third column in the question when mode BL is not
enabled.
When mode BL is enabled (using the toggle), the third column should of course
appear again.
How can I achieve this?
Regards,
Jan Willem
MWE:
\starttext
%Toggles
%\enablemode[BL]
\defineblock[question]
\defineblock[answer]
\hideblocks[question]
\hideblocks[answer]
\defineenumeration
[question]
[text=Question,
after={\blank[2*big]},
inbetween={\blank[nowhite]},
way=bychapter,
prefixsegments=chapter,
prefix=yes]
\defineenumeration
[answer]
[counter=answer,
text=,
width=,
before={\blank[nowhite]},
after={\blank[nowhite]},
indenting=no,
titledistance=1cm,
location=inmargin,
alternative=left,
headstyle=,
way=bychapter,
prefixsegments=chapter,
prefix=yes]
\beginquestion
\startquestion
Calculate the hydrostatic pressure of the following fluid.
\starttabulate[|lw(6cm)|lw(3cm)|\doifmode{BL}{p|}]
\NC Well depth \NC 10100 ft\doifmode{BL}{\NC 3100 m}
\NC \NR
\NC Fluid density\NC 9.0 ppg \doifmode{BL}{\NC 1.08 kg/l}
\NC \NR
\stoptabulate
\stopquestion
\endquestion
\beginanswer
\startanswer
4726 psi\doifmode{BL}{ / 328 bar}
\stopanswer
\endanswer
\startsection[title=Questions]
\useblocks[question]
\startsubsubsection[title=Answers]
\useblocks[answer]
\stopsubsubsection
\stopsection
\stoptext
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
