Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hello, Pertinent to this discussion, where can I find instructions on how DCAE service components can be created and deployed in Beijing release? There must be a document explaining this somewhere that I haven’t found yet. Rebecca From: onap-discuss-boun...@lists.onap.org On Behalf Of Sklyar, Igor Sent: Thursday, June 14, 2018 8:41 AM To: VENKATESH KUMAR, VIJAY ; Bisht, Suraj (Nokia - US/Irving) ; HWANG, MICHAEL ; fu.guangr...@zte.com.cn; JI, LUSHENG ; Lando,Michael Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Vijay, Suraj, Amsterdam does not support DCAE-DS onboarding and blueprint generation. DCAE-DS was contributed in Beijing, but with the limitation that it does not support K8S based microServices. The support for K8S based model and blueprint generation is planned for Casablanca. Thanks, Igor From: VENKATESH KUMAR, VIJAY Sent: Thursday, June 14, 2018 2:02 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; Lando,Michael mailto:ml6...@intl.att.com>>; Sklyar, Igor mailto:is8...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Suraj, I don’t believe Amsterdam SDC support component model generation. It may be available in Beijing; will have to defer to SDC team to explain the setup though. Michael/Igor – Can you help? Thanks, -Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Wednesday, June 13, 2018 10:42 AM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; LANDO, MICHAEL mailto:ml6...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike, We have created data-format.json and component.json for our application but I am still not clear what should in csar package to design an DCAE component in SDC , kindly share details or any link explaining entire process in Amsterdam release. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Tuesday, June 12, 2018 5:25 PM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; LANDO, MICHAEL mailto:ml6...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure HI Suraj, It was not part of Amsterdam, DCAE-DS was included in Beijing release. I’ve copied Michael from SDC team who can give more info. However DCAE-DS was not used for model/blueprint generation in R2 (component blueprints were created manually). For R3, current plans are to onboard the DCAE MS through SDC/DS. Thanks, Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Tuesday, June 12, 2018 12:42 PM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL mailto:mhw...@research.att.com>>; Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-disc
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Vijay, Suraj, Amsterdam does not support DCAE-DS onboarding and blueprint generation. DCAE-DS was contributed in Beijing, but with the limitation that it does not support K8S based microServices. The support for K8S based model and blueprint generation is planned for Casablanca. Thanks, Igor From: VENKATESH KUMAR, VIJAY Sent: Thursday, June 14, 2018 2:02 AM To: Bisht, Suraj (Nokia - US/Irving) ; HWANG, MICHAEL ; fu.guangr...@zte.com.cn; JI, LUSHENG ; Lando,Michael ; Sklyar, Igor Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Suraj, I don’t believe Amsterdam SDC support component model generation. It may be available in Beijing; will have to defer to SDC team to explain the setup though. Michael/Igor – Can you help? Thanks, -Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Wednesday, June 13, 2018 10:42 AM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; LANDO, MICHAEL mailto:ml6...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike, We have created data-format.json and component.json for our application but I am still not clear what should in csar package to design an DCAE component in SDC , kindly share details or any link explaining entire process in Amsterdam release. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Tuesday, June 12, 2018 5:25 PM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; LANDO, MICHAEL mailto:ml6...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure HI Suraj, It was not part of Amsterdam, DCAE-DS was included in Beijing release. I’ve copied Michael from SDC team who can give more info. However DCAE-DS was not used for model/blueprint generation in R2 (component blueprints were created manually). For R3, current plans are to onboard the DCAE MS through SDC/DS. Thanks, Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Tuesday, June 12, 2018 12:42 PM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL mailto:mhw...@research.att.com>>; Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure The component spec example of VES collector is available on the same wiki<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_download_attachments_8232019_vescollector-2Dcomponentspec.json-3Fversion-3D1-26modificationDate-3D1500241143000-26api-3Dv2=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=6WYcUG7NY-ZxfqWx5MmzVQ=Td4kDOXa-MetJ7vYMPaQQv6h8YwcBW6YW1dfvxXI-vA=KY1R0Fof0iHAaF_AyshJG-LrO6o8ya-ZcX4c_yjCjG0=> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@researc
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Suraj, I don’t believe Amsterdam SDC support component model generation. It may be available in Beijing; will have to defer to SDC team to explain the setup though. Michael/Igor – Can you help? Thanks, -Vijay From: Bisht, Suraj (Nokia - US/Irving) Sent: Wednesday, June 13, 2018 10:42 AM To: VENKATESH KUMAR, VIJAY ; HWANG, MICHAEL ; fu.guangr...@zte.com.cn; JI, LUSHENG ; LANDO, MICHAEL Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike, We have created data-format.json and component.json for our application but I am still not clear what should in csar package to design an DCAE component in SDC , kindly share details or any link explaining entire process in Amsterdam release. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Tuesday, June 12, 2018 5:25 PM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>>; LANDO, MICHAEL mailto:ml6...@intl.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure HI Suraj, It was not part of Amsterdam, DCAE-DS was included in Beijing release. I’ve copied Michael from SDC team who can give more info. However DCAE-DS was not used for model/blueprint generation in R2 (component blueprints were created manually). For R3, current plans are to onboard the DCAE MS through SDC/DS. Thanks, Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Tuesday, June 12, 2018 12:42 PM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL mailto:mhw...@research.att.com>>; Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure The component spec example of VES collector is available on the same wiki<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_download_attachments_8232019_vescollector-2Dcomponentspec.json-3Fversion-3D1-26modificationDate-3D1500241143000-26api-3Dv2=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=6WYcUG7NY-ZxfqWx5MmzVQ=Td4kDOXa-MetJ7vYMPaQQv6h8YwcBW6YW1dfvxXI-vA=KY1R0Fof0iHAaF_AyshJG-LrO6o8ya-ZcX4c_yjCjG0=> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure +Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sa
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hi Vijay, Mike, We have created data-format.json and component.json for our application but I am still not clear what should in csar package to design an DCAE component in SDC , kindly share details or any link explaining entire process in Amsterdam release. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Tuesday, June 12, 2018 5:25 PM To: Bisht, Suraj (Nokia - US/Irving) ; HWANG, MICHAEL ; fu.guangr...@zte.com.cn; JI, LUSHENG ; LANDO, MICHAEL Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure HI Suraj, It was not part of Amsterdam, DCAE-DS was included in Beijing release. I’ve copied Michael from SDC team who can give more info. However DCAE-DS was not used for model/blueprint generation in R2 (component blueprints were created manually). For R3, current plans are to onboard the DCAE MS through SDC/DS. Thanks, Vijay From: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>> Sent: Tuesday, June 12, 2018 12:42 PM To: VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>; HWANG, MICHAEL mailto:mhw...@research.att.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL mailto:mhw...@research.att.com>>; Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure The component spec example of VES collector is available on the same wiki<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_download_attachments_8232019_vescollector-2Dcomponentspec.json-3Fversion-3D1-26modificationDate-3D1500241143000-26api-3Dv2=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=6WYcUG7NY-ZxfqWx5MmzVQ=Td4kDOXa-MetJ7vYMPaQQv6h8YwcBW6YW1dfvxXI-vA=KY1R0Fof0iHAaF_AyshJG-LrO6o8ya-ZcX4c_yjCjG0=> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure +Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sample? On 06/04/2018 05:36 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_MicroServices-2BOnboarding=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=QOGOInhcsUY7OJVwd5qKbfaGSocidMGj3pECtaoDzj0=yLnHRTG4259TVvxMTg3qicSl9nmlPBRhf31QxjlelW4=untzt6yBFxoB26ZmLhkzwFTnTI8wGDudVfNZFayArwg=> and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
HI Suraj, It was not part of Amsterdam, DCAE-DS was included in Beijing release. I’ve copied Michael from SDC team who can give more info. However DCAE-DS was not used for model/blueprint generation in R2 (component blueprints were created manually). For R3, current plans are to onboard the DCAE MS through SDC/DS. Thanks, Vijay From: Bisht, Suraj (Nokia - US/Irving) Sent: Tuesday, June 12, 2018 12:42 PM To: VENKATESH KUMAR, VIJAY ; HWANG, MICHAEL ; fu.guangr...@zte.com.cn; JI, LUSHENG Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL mailto:mhw...@research.att.com>>; Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure The component spec example of VES collector is available on the same wiki<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_download_attachments_8232019_vescollector-2Dcomponentspec.json-3Fversion-3D1-26modificationDate-3D1500241143000-26api-3Dv2=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=6WYcUG7NY-ZxfqWx5MmzVQ=Td4kDOXa-MetJ7vYMPaQQv6h8YwcBW6YW1dfvxXI-vA=KY1R0Fof0iHAaF_AyshJG-LrO6o8ya-ZcX4c_yjCjG0=> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure +Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sample? On 06/04/2018 05:36 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_MicroServices-2BOnboarding=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=QOGOInhcsUY7OJVwd5qKbfaGSocidMGj3pECtaoDzj0=yLnHRTG4259TVvxMTg3qicSl9nmlPBRhf31QxjlelW4=untzt6yBFxoB26ZmLhkzwFTnTI8wGDudVfNZFayArwg=> and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one sample to verify DCAE micro service component deployment. Thanks, Suraj From: Michael Hwang [mailto:mhw...@research.att.com] Sent: Monday, June 04, 2018 4:24 PM To: Bisht, Suraj (Nokia - US/Irving) <mailto:suraj.bi...@nokia.com>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; l...@research.att.com<mailto:l...@research.att.com> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can > we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized wit
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hi Vijay, Mike Is DCAE-DS tool available in Amsterdam release? I can’t find any link in SDC GUI to access DCAE-DS tool kindly clarify how to access DCAE-DS, is there any specific ONAP component IP/link need to be used? Some background for our use case We are trying to create a micro service/application in DCAE to Publish/Subscribe particular events through new application. Thanks, Suraj From: VENKATESH KUMAR, VIJAY [mailto:vv7...@att.com] Sent: Friday, June 08, 2018 1:34 PM To: HWANG, MICHAEL ; Bisht, Suraj (Nokia - US/Irving) ; fu.guangr...@zte.com.cn; JI, LUSHENG Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure The component spec example of VES collector is available on the same wiki<https://wiki.onap.org/download/attachments/8232019/vescollector-componentspec.json?version=1=1500241143000=v2> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) mailto:suraj.bi...@nokia.com>>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; JI, LUSHENG mailto:l...@research.att.com>> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure +Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sample? On 06/04/2018 05:36 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_MicroServices-2BOnboarding=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=QOGOInhcsUY7OJVwd5qKbfaGSocidMGj3pECtaoDzj0=yLnHRTG4259TVvxMTg3qicSl9nmlPBRhf31QxjlelW4=untzt6yBFxoB26ZmLhkzwFTnTI8wGDudVfNZFayArwg=> and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one sample to verify DCAE micro service component deployment. Thanks, Suraj From: Michael Hwang [mailto:mhw...@research.att.com] Sent: Monday, June 04, 2018 4:24 PM To: Bisht, Suraj (Nokia - US/Irving) <mailto:suraj.bi...@nokia.com>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; l...@research.att.com<mailto:l...@research.att.com> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can > we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized with the dcae_cli tables. > b)Is dcae CLI an offline tool, can it be install and used independently > from DCAE/ONAP setup? The dcae_cli has a range of features including to help with testing your component on a DCAE environment as part of onboarding. If you are not intending to test then you would not need a DCAE environment. > b) Can dcae_cli tool generate csar without setting-up catalog database? dcae_cli does not generate csars > c) Is there any sample csar available to verify deployment of dcae > micro-service component? See the previous answer. Thanks Mike On 06/04/2018 05:07 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b)Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b) Can dcae_cli tool generate csar without setting-up catalog database? c)
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
The component spec example of VES collector is available on the same wiki<https://wiki.onap.org/download/attachments/8232019/vescollector-componentspec.json?version=1=1500241143000=v2> The ToscaLab tool used for model generations are supported by DCAE-DS under SDC project (updated the onboarding sequence flow which had an older version). Thanks, Vijay From: HWANG, MICHAEL Sent: Friday, June 08, 2018 10:05 AM To: Bisht, Suraj (Nokia - US/Irving) ; fu.guangr...@zte.com.cn; JI, LUSHENG Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org; VENKATESH KUMAR, VIJAY Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure +Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sample? On 06/04/2018 05:36 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_MicroServices-2BOnboarding=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=QOGOInhcsUY7OJVwd5qKbfaGSocidMGj3pECtaoDzj0=yLnHRTG4259TVvxMTg3qicSl9nmlPBRhf31QxjlelW4=untzt6yBFxoB26ZmLhkzwFTnTI8wGDudVfNZFayArwg=> and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one sample to verify DCAE micro service component deployment. Thanks, Suraj From: Michael Hwang [mailto:mhw...@research.att.com] Sent: Monday, June 04, 2018 4:24 PM To: Bisht, Suraj (Nokia - US/Irving) <mailto:suraj.bi...@nokia.com>; fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn>; l...@research.att.com<mailto:l...@research.att.com> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can > we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized with the dcae_cli tables. > b)Is dcae CLI an offline tool, can it be install and used independently > from DCAE/ONAP setup? The dcae_cli has a range of features including to help with testing your component on a DCAE environment as part of onboarding. If you are not intending to test then you would not need a DCAE environment. > b) Can dcae_cli tool generate csar without setting-up catalog database? dcae_cli does not generate csars > c) Is there any sample csar available to verify deployment of dcae > micro-service component? See the previous answer. Thanks Mike On 06/04/2018 05:07 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b)Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b) Can dcae_cli tool generate csar without setting-up catalog database? c) Is there any sample csar available to verify deployment of dcae micro-service component? Thanks, Suraj From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> Sent: Monday, October 09, 2017 8:11 AM To: l...@research.att.com<mailto:l...@research.att.com> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; mhw...@research.att.com<mailto:mhw...@research.att.com> Subject: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, t
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
+Vijay The dcae_cli tool does not generate csar packages. It is intended that the dcae_cli tool should generate tosca models which are to be used by the dcae design studio which is in sdc. Currently this tosca model generation is a separate step. Regarding self service of tosca model generation, @Lusheng who can help him with the tooling? Regarding samples, one of the features of the dcae onboarding experience is to provide a shared catalog of components so that developers can share and browse. However, this sort of environment is not being hosted right now. @Vijay could you provide the ves's component spec as a sample? On 06/04/2018 05:36 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding <https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_MicroServices-2BOnboarding=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=QOGOInhcsUY7OJVwd5qKbfaGSocidMGj3pECtaoDzj0=yLnHRTG4259TVvxMTg3qicSl9nmlPBRhf31QxjlelW4=untzt6yBFxoB26ZmLhkzwFTnTI8wGDudVfNZFayArwg=> and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one sample to verify DCAE micro service component deployment. Thanks, Suraj *From:*Michael Hwang [mailto:mhw...@research.att.com] *Sent:* Monday, June 04, 2018 4:24 PM *To:* Bisht, Suraj (Nokia - US/Irving) ; fu.guangr...@zte.com.cn; l...@research.att.com *Cc:* peng.congc...@zte.com.cn; onap-discuss@lists.onap.org *Subject:* Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized with the dcae_cli tables. > b) Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? The dcae_cli has a range of features including to help with testing your component on a DCAE environment as part of onboarding. If you are not intending to test then you would not need a DCAE environment. > b) Can dcae_cli tool generate csar without setting-up catalog database? dcae_cli does not generate csars > c) Is there any sample csar available to verify deployment of dcae micro-service component? See the previous answer. Thanks Mike On 06/04/2018 05:07 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a)Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b) Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b)Can dcae_cli tool generate csar without setting-up catalog database? c)Is there any sample csar available to verify deployment of dcae micro-service component? Thanks, Suraj *From:*onap-discuss-boun...@lists.onap.org <mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] *On Behalf Of *fu.guangr...@zte.com.cn <mailto:fu.guangr...@zte.com.cn> *Sent:* Monday, October 09, 2017 8:11 AM *To:* l...@research.att.com <mailto:l...@research.att.com> *Cc:* peng.congc...@zte.com.cn <mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org <mailto:onap-discuss@lists.onap.org>; mhw...@research.att.com <mailto:mhw...@research.att.com> *Subject:* [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, they are not completely done. Otherwise, we have to send those files to your team for verification every time we make any tiny changes. I think that might be quite annoying and less efficient. Any advice on this will be helpful and welcome. Thanks. Guangrong 原始邮件 *发件人:*JI,LUSHENG(LUSHENG) *收件人:*付光荣10144542; *抄送人:*onap-discuss@lists.onap.org <mailto:onap-discuss@lists.onap.org>;彭聪聪612843;HWANG, MICHAEL(MICHAEL); *日期:*2017-10-09 20:32:58 *主**题:Re: **答复:[dcae] dcae-cli Installation Failure* Guangrong, I discussed with Michael about this subject. Using ONAP Nexus is not an ideal solution. The reason is that from DCAE cli perspecti
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hi Mike, Thanks for your response, I was going through following link https://wiki.onap.org/display/DW/MicroServices+Onboarding and I got impression that dcae_cli tool will be used to generate csar package which can be used in SDC during DCAE component design, is this not the case? Can you guide me how to create SDC compliant template to create DCAE component if I have data-formats and component-spec json files? If possible kindly share one sample to verify DCAE micro service component deployment. Thanks, Suraj From: Michael Hwang [mailto:mhw...@research.att.com] Sent: Monday, June 04, 2018 4:24 PM To: Bisht, Suraj (Nokia - US/Irving) ; fu.guangr...@zte.com.cn; l...@research.att.com Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can > we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized with the dcae_cli tables. > b)Is dcae CLI an offline tool, can it be install and used independently > from DCAE/ONAP setup? The dcae_cli has a range of features including to help with testing your component on a DCAE environment as part of onboarding. If you are not intending to test then you would not need a DCAE environment. > b) Can dcae_cli tool generate csar without setting-up catalog database? dcae_cli does not generate csars > c) Is there any sample csar available to verify deployment of dcae > micro-service component? See the previous answer. Thanks Mike On 06/04/2018 05:07 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b)Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b) Can dcae_cli tool generate csar without setting-up catalog database? c) Is there any sample csar available to verify deployment of dcae micro-service component? Thanks, Suraj From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> Sent: Monday, October 09, 2017 8:11 AM To: l...@research.att.com<mailto:l...@research.att.com> Cc: peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; mhw...@research.att.com<mailto:mhw...@research.att.com> Subject: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, they are not completely done. Otherwise, we have to send those files to your team for verification every time we make any tiny changes. I think that might be quite annoying and less efficient. Any advice on this will be helpful and welcome. Thanks. Guangrong 原始邮件 发件人:JI,LUSHENG(LUSHENG) 收件人:付光荣10144542; 抄送人:onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>;彭聪聪612843;HWANG, MICHAEL(MICHAEL); 日期:2017-10-09 20:32:58 主题:Re: 答复:[dcae] dcae-cli Installation Failure Guangrong, I discussed with Michael about this subject. Using ONAP Nexus is not an ideal solution. The reason is that from DCAE cli perspective, Nexus is read only (write access is only from Gerrit). Therefore any new schema onboarded from cli cannot be added to Nexus from DCAE cli. I donot have a good solution. Maybe we will have to launch a VM in Pod25. But VMs there are often rebuilt so they are not very "stable". So special care needs to be taken for resiliency. The same problem existing for all ONAP design time flows and components. I donot know for example how SDC stores its blueprints and catalog.. If they have a solution we can probably use the same solution. Lusheng Sent via the Samsung Galaxy S7, an AT 4G LTE smartphone Original message From: fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> Date: 10/9/17 6:27 AM (GMT-05:00) To: "JI, LUSHENG (LUSHENG)" mailto:l...@research.att.com>> Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>, peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>, "HWANG, MICHAEL (MICHAEL)" mailto:mhw...@research.att.com>> Subject: Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, Do you have any suggestion on this? If the ONAP nexus server could not
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hi Suraj > a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? Yes the dcae_cli postgres is a separate database. You could share a common postgres instance but would have to have been initialized with the dcae_cli tables. > b) Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? The dcae_cli has a range of features including to help with testing your component on a DCAE environment as part of onboarding. If you are not intending to test then you would not need a DCAE environment. > b) Can dcae_cli tool generate csar without setting-up catalog database? dcae_cli does not generate csars > c) Is there any sample csar available to verify deployment of dcae micro-service component? See the previous answer. Thanks Mike On 06/04/2018 05:07 PM, Bisht, Suraj (Nokia - US/Irving) wrote: Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a)Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b) Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b)Can dcae_cli tool generate csar without setting-up catalog database? c)Is there any sample csar available to verify deployment of dcae micro-service component? Thanks, Suraj *From:*onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] *On Behalf Of *fu.guangr...@zte.com.cn *Sent:* Monday, October 09, 2017 8:11 AM *To:* l...@research.att.com *Cc:* peng.congc...@zte.com.cn; onap-discuss@lists.onap.org; mhw...@research.att.com *Subject:* [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, they are not completely done. Otherwise, we have to send those files to your team for verification every time we make any tiny changes. I think that might be quite annoying and less efficient. Any advice on this will be helpful and welcome. Thanks. Guangrong 原始邮件 *发件人:*JI,LUSHENG(LUSHENG) *收件人:*付光荣10144542; *抄送人:*onap-discuss@lists.onap.org;彭聪聪612843;HWANG, MICHAEL(MICHAEL); *日期:*2017-10-09 20:32:58 *主**题:Re: **答复:[dcae] dcae-cli Installation Failure* Guangrong, I discussed with Michael about this subject. Using ONAP Nexus is not an ideal solution. The reason is that from DCAE cli perspective, Nexus is read only (write access is only from Gerrit). Therefore any new schema onboarded from cli cannot be added to Nexus from DCAE cli. I donot have a good solution. Maybe we will have to launch a VM in Pod25. But VMs there are often rebuilt so they are not very "stable". So special care needs to be taken for resiliency. The same problem existing for all ONAP design time flows and components. I donot know for example how SDC stores its blueprints and catalog.. If they have a solution we can probably use the same solution. Lusheng Sent via the Samsung Galaxy S7, an AT 4G LTE smartphone Original message From: fu.guangr...@zte.com.cn <mailto:fu.guangr...@zte.com.cn> Date: 10/9/17 6:27 AM (GMT-05:00) To: "JI, LUSHENG (LUSHENG)" <mailto:l...@research.att.com>> Cc: onap-discuss@lists.onap.org <mailto:onap-discuss@lists.onap.org>, peng.congc...@zte.com.cn <mailto:peng.congc...@zte.com.cn>, "HWANG, MICHAEL (MICHAEL)" <mailto:mhw...@research.att.com>> Subject: Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, Do you have any suggestion on this? If the ONAP nexus server could not be used, could you please give us some guidance on setting up such a server (such as the dir hirarchy on the server side and the dir names, etc.)? Thanks. Guangrong *Sender: *mailto:mhw...@research.att.com>>; *To: *fuguangrong10144542; *CC: *mailto:l...@research.att.com>>; <mailto:onap-discuss@lists.onap.org>>;pengcongcong612843; *Date: *2017/10/05 02:51 *Subject: Re: **答复:[dcae] dcae-cli Installation Failure* The dcae-cli expects json schema files and the server is a simple web server that hosts these files. @Lusheng could we use ONAP's nexus raw file server to serve up these files? On 10/04/2017 01:27 AM, fu.guangr...@zte.com.cn <mailto:fu.guangr...@zte.com.cn> wrote: Mike, We succeeded in installing the dcae-cli tool. But when I try to initialize it using dcae_cli --reinit or to check the version using dcae_cli --version, the url of a server is required: What is the url of the remote server, please? Do we have to set up such a ser
Re: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Hi, Kindly clarify following queries on dcae_cli tool, will appreciate any pointers a) Is dcae_cli postgress database for catalog a separate database, can we use existing database from other ONAP components (i.e. SDC)? b)Is dcae CLI an offline tool, can it be install and used independently from DCAE/ONAP setup? b) Can dcae_cli tool generate csar without setting-up catalog database? c) Is there any sample csar available to verify deployment of dcae micro-service component? Thanks, Suraj From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of fu.guangr...@zte.com.cn Sent: Monday, October 09, 2017 8:11 AM To: l...@research.att.com Cc: peng.congc...@zte.com.cn; onap-discuss@lists.onap.org; mhw...@research.att.com Subject: [onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, they are not completely done. Otherwise, we have to send those files to your team for verification every time we make any tiny changes. I think that might be quite annoying and less efficient. Any advice on this will be helpful and welcome. Thanks. Guangrong 原始邮件 发件人:JI,LUSHENG(LUSHENG) 收件人:付光荣10144542; 抄送人:onap-discuss@lists.onap.org;彭聪聪612843;HWANG, MICHAEL(MICHAEL); 日期:2017-10-09 20:32:58 主题:Re: 答复:[dcae] dcae-cli Installation Failure Guangrong, I discussed with Michael about this subject. Using ONAP Nexus is not an ideal solution. The reason is that from DCAE cli perspective, Nexus is read only (write access is only from Gerrit). Therefore any new schema onboarded from cli cannot be added to Nexus from DCAE cli. I donot have a good solution. Maybe we will have to launch a VM in Pod25. But VMs there are often rebuilt so they are not very "stable". So special care needs to be taken for resiliency. The same problem existing for all ONAP design time flows and components. I donot know for example how SDC stores its blueprints and catalog.. If they have a solution we can probably use the same solution. Lusheng Sent via the Samsung Galaxy S7, an AT 4G LTE smartphone Original message From: fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> Date: 10/9/17 6:27 AM (GMT-05:00) To: "JI, LUSHENG (LUSHENG)" mailto:l...@research.att.com>> Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>, peng.congc...@zte.com.cn<mailto:peng.congc...@zte.com.cn>, "HWANG, MICHAEL (MICHAEL)" mailto:mhw...@research.att.com>> Subject: Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, Do you have any suggestion on this? If the ONAP nexus server could not be used, could you please give us some guidance on setting up such a server (such as the dir hirarchy on the server side and the dir names, etc.)? Thanks. Guangrong Sender: mailto:mhw...@research.att.com>>; To: fuguangrong10144542; CC: mailto:l...@research.att.com>>; mailto:onap-discuss@lists.onap.org>>;pengcongcong612843; Date: 2017/10/05 02:51 Subject: Re: 答复:[dcae] dcae-cli Installation Failure The dcae-cli expects json schema files and the server is a simple web server that hosts these files. @Lusheng could we use ONAP's nexus raw file server to serve up these files? On 10/04/2017 01:27 AM, fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> wrote: Mike, We succeeded in installing the dcae-cli tool. But when I try to initialize it using dcae_cli --reinit or to check the version using dcae_cli --version, the url of a server is required: [cid:0047000102d75585258d67681] What is the url of the remote server, please? Do we have to set up such a server by ourselves? Thanks. Guangrong Sender: <mailto:mhw...@research.att.com>; To: fuguangrong10144542; CC: <mailto:l...@research.att.com>; <mailto:onap-discuss@lists.onap.org>;pengcongcong612843; Date: 2017/09/27 22:23 Subject: Re: 答复:[dcae] dcae-cli Installation Failure I just tried in a new virtualenv and the cli installed for me ok. On 09/27/2017 10:03 AM, fu.guangr...@zte.com.cn<mailto:fu.guangr...@zte.com.cn> wrote: Thank you, Mike. We've already had a postgres running locally. We'll try to install the cli tool from the source using the pip instruction you provided tomorrow. (I have limited access to our internal lab while I'm in Paris so I'll leave
[onap-discuss] 答复:Re: 答复:[dcae] dcae-cli Installation Failure
Lusheng,How do you use the cli tool within AT? I want to set up a simple web server to host the templates and blueprints. The reason why I ask this is that we want to verify the component specification files on our own. As you know, they are not completely done. Otherwise, we have to send those files to your team for verification every time we make any tiny changes. I think that might be quite annoying and less efficient.Any advice on this will be helpful and welcome. Thanks. Guangrong 原始邮件 发件人:JI,LUSHENG(LUSHENG) 收件人:付光荣10144542; 抄送人:onap-discuss@lists.onap.org;彭聪聪612843;HWANG, MICHAEL(MICHAEL); 日期:2017-10-09 20:32:58 主题:Re: 答复:[dcae] dcae-cli Installation Failure Guangrong, I discussed with Michael about this subject. Using ONAP Nexus is not an ideal solution. The reason is that from DCAE cli perspective, Nexus is read only (write access is only from Gerrit). Therefore any new schema onboarded from cli cannot be added to Nexus from DCAE cli. I donot have a good solution. Maybe we will have to launch a VM in Pod25. But VMs there are often rebuilt so they are not very "stable". So special care needs to be taken for resiliency. The same problem existing for all ONAP design time flows and components. I donot know for example how SDC stores its blueprints and catalog.. If they have a solution we can probably use the same solution. Lusheng Sent via the Samsung Galaxy S7, an AT 4G LTE smartphone Original message From: fu.guangr...@zte.com.cn Date: 10/9/17 6:27 AM (GMT-05:00) To: "JI, LUSHENG (LUSHENG)"Cc: onap-discuss@lists.onap.org, peng.congc...@zte.com.cn, "HWANG, MICHAEL (MICHAEL)" Subject: Re: 答复:[dcae] dcae-cli Installation Failure Lusheng, Do you have any suggestion on this? If the ONAP nexus server could not be used, could you please give us some guidance on setting up such a server (such as the dir hirarchy on the server side and the dir names, etc.)? Thanks. Guangrong Sender: ; To: fuguangrong10144542; CC: ; ;pengcongcong612843; Date: 2017/10/05 02:51 Subject: Re: 答复:[dcae] dcae-cli Installation Failure The dcae-cli expects json schema files and the server is a simple web server that hosts these files. @Lusheng could we use ONAP's nexus raw file server to serve up these files? On 10/04/2017 01:27 AM, fu.guangr...@zte.com.cn wrote: Mike, We succeeded in installing the dcae-cli tool. But when I try to initialize it using dcae_cli --reinit or to check the version using dcae_cli --version, the url of a server is required: What is the url of the remote server, please? Do we have to set up such a server by ourselves? Thanks. Guangrong Sender: ; To: fuguangrong10144542; CC: ; ;pengcongcong612843; Date: 2017/09/27 22:23 Subject: Re: 答复:[dcae] dcae-cli Installation Failure I just tried in a new virtualenv and the cli installed for me ok. On 09/27/2017 10:03 AM, fu.guangr...@zte.com.cn wrote: Thank you, Mike. We've already had a postgres running locally. We'll try to install the cli tool from the source using the pip instruction you provided tomorrow. (I have limited access to our internal lab while I'm in Paris so I'll leave that to my team. :D) @Peng Could you please try it again following the suggestion below? If there's still problem, pls let us know asap. Thanks.. Guangrong Sender: ; To: fuguangrong10144542; CC: ; ;pengcongcong612843; Date: 2017/09/27 21:57 Subject: Re: 答复:[dcae] dcae-cli Installation Failure