Re: [onap-discuss] Regarding Full ONAP installation

2018-04-02 Thread Roger Maitland 
Note that if you’re working on Beijing the “create” scripts have been replaced 
with Helm commands.  See the OOM User 
Guide<http://onap.readthedocs.io/en/latest/submodules/oom.git/docs/oom_user_guide.html#user-guide-label>
 for details.

Cheers,
Roger

From: <onap-discuss-boun...@lists.onap.org> on behalf of Michael O'Brien 
<frank.obr...@amdocs.com>
Date: Sunday, April 1, 2018 at 10:25 AM
To: ANKIT ROHILLA <ankit.rohill...@gmail.com>
Cc: "onap-discuss@lists.onap.org" <onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi, I assume you have vfc, vnfsdk and aaf as failures – ignore these for now
Also is sdnc failing – delete/recreate these containers – that was a random 
timing issue – being fixed
./deleteAll.bash –n onap –a sdnc
./createAll.bash –n onap –a sdnc

Then use the vnc-portal container in the portal pod for now on port 30211, and 
launch the 8989 port url via the wiki link

I don’t fully know what your context of “node” is – the default setup is a 
single 64g collocated server/host vm

/michael

From: ANKIT ROHILLA [mailto:ankit.rohill...@gmail.com]
Sent: Thursday, March 29, 2018 05:01
To: Michael O'Brien <frank.obr...@amdocs.com>
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi,
I am stuck at a point.
I ran the cd.sh script and it created all the pods accordingly and all are 
running fine (10 of them are stuck at pending state till the end).
All the Portal related pods are running well, there are no errors in that.
But according to the link: 
https://wiki.onap.org/display/DW/Tutorial%3A+Accessing+the+ONAP+Portal, I need 
to have 4 different nodes (for sdc, policy, portal and vid) and the IPs of 
these nodes are to be included in /etc/hosts file, so that I can access the 
ONAP Portal.
Since, cd.sh did not create any node (it created just pods), what do I have to 
do next to access portal?
Please help. I have no clue what to do now.
Thanks and Regards
Ankit

On Fri, Mar 2, 2018 at 1:59 AM, Michael O'Brien 
<frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> wrote:
Ankit,
   The WIP entrypoint script is attached to the jira – I just tested it on the 
latest master on a clean VM – it will automatically install Rancher 1.6 and OOM.
   A single namespace patch just went in 2 hours ago – so pods are coming up 
slower than normal (51 failures@20m (clean) and 21 failures@20 min (upgrade) on 
2 separate VMs) – we should know the state of master shortly – may be a slower 
nexus3 issue (the wiki was down for a bit yesterday).

   The cd.sh script has a removal/deletion section for all pods and the config 
container – before it reclones OOM and creates all the pods – you will see 
errors deleting pods – if you run cd.sh on a clean system (not doing an 
upgrade) – you can ignore these.

   Troubleshooting:
   If you are stuck waiting for the config pod over 11 min (usually 3) – then 
your onap-parameters.yaml file is not correct – check the logs on the config 
container to see what variables are missing – remember onap-parameters.yaml is 
different for master and amsterdam – the line in the script is waiting for a 
“0/1 completed”
https://git.onap.org/oom/tree/kubernetes/config/onap-parameters.yaml?h=amsterdam

https://jira.onap.org/browse/OOM-710
If you run the following example entrypoint.sh – it will wget everything 
required including a fake master version of onap-parameters.yaml (VNF creation 
or keystone login will not work unless you swap out your own for example)
https://jira.onap.org/secure/attachment/11206/oom_entrypoint.sh

Also make sure you are getting all the scripts either from the attached 
versions or the gerrit reviews themselves – as they are still under review and 
not committed to master yet.
https://jira.onap.org/browse/OOM-716


/michael

From: ANKIT ROHILLA 
[mailto:ankit.rohill...@gmail.com<mailto:ankit.rohill...@gmail.com>]
Sent: Thursday, March 1, 2018 02:57
To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>

Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi,
I followed the above steps but when I run "./cd.sh -b master" it gives multiple 
errors similar to the following error:
Error: configmaps is forbidden: User 
"system:serviceaccount:kube-system:default" cannot list configmaps in the 
namespace "kube-system"
Error from server (NotFound): namespaces "onap-mso" not found
Error from server (NotFound): 
clusterrolebindings.rbac.authorization.k8s.io<http://clusterrolebindings.rbac.authorization.k8s.io>
 "onap-mso-admin-binding" not found
Service account onap-mso-admin-binding deleted.
I checked and found that all the folders like mso, aaf etc. are present in 
/oom/kubernetes/.
After many errors similar to the above one, it loops on "waiting for config pod 
to complete. No resources found."

Please help. What

Re: [onap-discuss] Regarding Full ONAP installation

2018-04-01 Thread Michael O'Brien 
Hi, I assume you have vfc, vnfsdk and aaf as failures – ignore these for now
Also is sdnc failing – delete/recreate these containers – that was a random 
timing issue – being fixed
./deleteAll.bash –n onap –a sdnc
./createAll.bash –n onap –a sdnc

Then use the vnc-portal container in the portal pod for now on port 30211, and 
launch the 8989 port url via the wiki link

I don’t fully know what your context of “node” is – the default setup is a 
single 64g collocated server/host vm

/michael

From: ANKIT ROHILLA [mailto:ankit.rohill...@gmail.com]
Sent: Thursday, March 29, 2018 05:01
To: Michael O'Brien <frank.obr...@amdocs.com>
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi,
I am stuck at a point.
I ran the cd.sh script and it created all the pods accordingly and all are 
running fine (10 of them are stuck at pending state till the end).
All the Portal related pods are running well, there are no errors in that.
But according to the link: 
https://wiki.onap.org/display/DW/Tutorial%3A+Accessing+the+ONAP+Portal, I need 
to have 4 different nodes (for sdc, policy, portal and vid) and the IPs of 
these nodes are to be included in /etc/hosts file, so that I can access the 
ONAP Portal.
Since, cd.sh did not create any node (it created just pods), what do I have to 
do next to access portal?
Please help. I have no clue what to do now.
Thanks and Regards
Ankit

On Fri, Mar 2, 2018 at 1:59 AM, Michael O'Brien 
<frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> wrote:
Ankit,
   The WIP entrypoint script is attached to the jira – I just tested it on the 
latest master on a clean VM – it will automatically install Rancher 1.6 and OOM.
   A single namespace patch just went in 2 hours ago – so pods are coming up 
slower than normal (51 failures@20m (clean) and 21 failures@20 min (upgrade) on 
2 separate VMs) – we should know the state of master shortly – may be a slower 
nexus3 issue (the wiki was down for a bit yesterday).

   The cd.sh script has a removal/deletion section for all pods and the config 
container – before it reclones OOM and creates all the pods – you will see 
errors deleting pods – if you run cd.sh on a clean system (not doing an 
upgrade) – you can ignore these.

   Troubleshooting:
   If you are stuck waiting for the config pod over 11 min (usually 3) – then 
your onap-parameters.yaml file is not correct – check the logs on the config 
container to see what variables are missing – remember onap-parameters.yaml is 
different for master and amsterdam – the line in the script is waiting for a 
“0/1 completed”
https://git.onap.org/oom/tree/kubernetes/config/onap-parameters.yaml?h=amsterdam

https://jira.onap.org/browse/OOM-710
If you run the following example entrypoint.sh – it will wget everything 
required including a fake master version of onap-parameters.yaml (VNF creation 
or keystone login will not work unless you swap out your own for example)
https://jira.onap.org/secure/attachment/11206/oom_entrypoint.sh

Also make sure you are getting all the scripts either from the attached 
versions or the gerrit reviews themselves – as they are still under review and 
not committed to master yet.
https://jira.onap.org/browse/OOM-716


/michael

From: ANKIT ROHILLA 
[mailto:ankit.rohill...@gmail.com<mailto:ankit.rohill...@gmail.com>]
Sent: Thursday, March 1, 2018 02:57
To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>

Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi,
I followed the above steps but when I run "./cd.sh -b master" it gives multiple 
errors similar to the following error:
Error: configmaps is forbidden: User 
"system:serviceaccount:kube-system:default" cannot list configmaps in the 
namespace "kube-system"
Error from server (NotFound): namespaces "onap-mso" not found
Error from server (NotFound): 
clusterrolebindings.rbac.authorization.k8s.io<http://clusterrolebindings.rbac.authorization.k8s.io>
 "onap-mso-admin-binding" not found
Service account onap-mso-admin-binding deleted.
I checked and found that all the folders like mso, aaf etc. are present in 
/oom/kubernetes/.
After many errors similar to the above one, it loops on "waiting for config pod 
to complete. No resources found."

Please help. What am I missing?
Thank you

On Tue, Feb 27, 2018 at 10:19 PM, ANKIT ROHILLA 
<ankit.rohill...@gmail.com<mailto:ankit.rohill...@gmail.com>> wrote:
Thank you so much for the above procedure. I'll try it and let you know if any 
problem is encountered.

Regards
Ankit Rohilla

On Feb 27, 2018 10:15 PM, "Michael O'Brien" 
<frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> wrote:
Ankit,
   Hi, the help page has been adjusted so that the automated scripts can be run 
while they are being reviewed (not in the OOM repo yet).  The goal of OOM-710 
is a one-click HEAT/ARM

Re: [onap-discuss] Regarding Full ONAP installation

2018-03-29 Thread ANKIT ROHILLA 
Hi,
I am stuck at a point.
I ran the cd.sh script and it created all the pods accordingly and all are
running fine (10 of them are stuck at pending state till the end).
All the Portal related pods are running well, there are no errors in that.
But according to the link:
*https://wiki.onap.org/display/DW/Tutorial%3A+Accessing+the+ONAP+Portal
<https://wiki.onap.org/display/DW/Tutorial%3A+Accessing+the+ONAP+Portal>*,
I need to have 4 different nodes (for sdc, policy, portal and vid) and the
IPs of these nodes are to be included in /etc/hosts file, so that I can
access the ONAP Portal.
Since, cd.sh did not create any node (it created just pods), what do I have
to do next to access portal?
Please help. I have no clue what to do now.

Thanks and Regards
Ankit

On Fri, Mar 2, 2018 at 1:59 AM, Michael O'Brien <frank.obr...@amdocs.com>
wrote:

> Ankit,
>
>The WIP entrypoint script is attached to the jira – I just tested it on
> the latest master on a clean VM – it will automatically install Rancher 1.6
> and OOM.
>
>A single namespace patch just went in 2 hours ago – so pods are coming
> up slower than normal (51 failures@20m (clean) and 21 failures@20 min
> (upgrade) on 2 separate VMs) – we should know the state of master shortly –
> may be a slower nexus3 issue (the wiki was down for a bit yesterday).
>
>
>
>The cd.sh script has a removal/deletion section for all pods and the
> config container – before it reclones OOM and creates all the pods – you
> will see errors deleting pods – if you run cd.sh on a clean system (not
> doing an upgrade) – you can ignore these.
>
>
>
>Troubleshooting:
>
>If you are stuck waiting for the config pod over 11 min (usually 3) –
> then your onap-parameters.yaml file is not correct – check the logs on the
> config container to see what variables are missing – remember
> onap-parameters.yaml is different for master and amsterdam – the line in
> the script is waiting for a “0/1 completed”
>
> https://git.onap.org/oom/tree/kubernetes/config/onap-
> parameters.yaml?h=amsterdam
>
>
>
> https://jira.onap.org/browse/OOM-710
>
> If you run the following example entrypoint.sh – it will wget everything
> required including a fake master version of onap-parameters.yaml (VNF
> creation or keystone login will not work unless you swap out your own for
> example)
>
> https://jira.onap.org/secure/attachment/11206/oom_entrypoint.sh
>
>
>
> Also make sure you are getting all the scripts either from the attached
> versions or the gerrit reviews themselves – as they are still under review
> and not committed to master yet.
>
> https://jira.onap.org/browse/OOM-716
>
>
>
>
>
> /michael
>
>
>
> *From:* ANKIT ROHILLA [mailto:ankit.rohill...@gmail.com]
> *Sent:* Thursday, March 1, 2018 02:57
> *To:* Michael O'Brien <frank.obr...@amdocs.com>
>
> *Subject:* Re: [onap-discuss] Regarding Full ONAP installation
>
>
>
> Hi,
>
> I followed the above steps but when I run "./cd.sh -b master" it gives
> multiple errors similar to the following error:
>
> Error: configmaps is forbidden: User 
> "system:serviceaccount:kube-system:default"
> cannot list configmaps in the namespace "kube-system"
> Error from server (NotFound): namespaces "onap-mso" not found
> Error from server (NotFound): clusterrolebindings.rbac.
> authorization.k8s.io "onap-mso-admin-binding" not found
> Service account onap-mso-admin-binding deleted.
>
> I checked and found that all the folders like mso, aaf etc. are present in
> /oom/kubernetes/.
>
> After many errors similar to the above one, it loops on "waiting for
> config pod to complete. No resources found."
>
>
> Please help. What am I missing?
>
> Thank you
>
>
>
> On Tue, Feb 27, 2018 at 10:19 PM, ANKIT ROHILLA <ankit.rohill...@gmail.com>
> wrote:
>
> Thank you so much for the above procedure. I'll try it and let you know if
> any problem is encountered.
>
>
>
> Regards
>
> Ankit Rohilla
>
>
>
> On Feb 27, 2018 10:15 PM, "Michael O'Brien" <frank.obr...@amdocs.com>
> wrote:
>
> Ankit,
>
>Hi, the help page has been adjusted so that the automated scripts can
> be run while they are being reviewed (not in the OOM repo yet).  The goal
> of OOM-710 is a one-click HEAT/ARM/CloudFormation template that runs
> oom_rancher_install.sh and cd.sh in sequence – this is being worked on –
> avoiding any manual DevOps
>
>
>
> https://jira.onap.org/browse/OOM-710
>
>
>
>As of today the rancher RI installation for Kubernetes, Helm, Docker is
> fully automated to run on Ubuntu 16.04 VM on any cloud provider belo

Re: [onap-discuss] Regarding Full ONAP installation

2018-03-01 Thread Michael O'Brien 
Ankit,
   The WIP entrypoint script is attached to the jira – I just tested it on the 
latest master on a clean VM – it will automatically install Rancher 1.6 and OOM.
   A single namespace patch just went in 2 hours ago – so pods are coming up 
slower than normal (51 failures@20m (clean) and 21 failures@20 min (upgrade) on 
2 separate VMs) – we should know the state of master shortly – may be a slower 
nexus3 issue (the wiki was down for a bit yesterday).

   The cd.sh script has a removal/deletion section for all pods and the config 
container – before it reclones OOM and creates all the pods – you will see 
errors deleting pods – if you run cd.sh on a clean system (not doing an 
upgrade) – you can ignore these.

   Troubleshooting:
   If you are stuck waiting for the config pod over 11 min (usually 3) – then 
your onap-parameters.yaml file is not correct – check the logs on the config 
container to see what variables are missing – remember onap-parameters.yaml is 
different for master and amsterdam – the line in the script is waiting for a 
“0/1 completed”
https://git.onap.org/oom/tree/kubernetes/config/onap-parameters.yaml?h=amsterdam

https://jira.onap.org/browse/OOM-710
If you run the following example entrypoint.sh – it will wget everything 
required including a fake master version of onap-parameters.yaml (VNF creation 
or keystone login will not work unless you swap out your own for example)
https://jira.onap.org/secure/attachment/11206/oom_entrypoint.sh

Also make sure you are getting all the scripts either from the attached 
versions or the gerrit reviews themselves – as they are still under review and 
not committed to master yet.
https://jira.onap.org/browse/OOM-716


/michael

From: ANKIT ROHILLA [mailto:ankit.rohill...@gmail.com]
Sent: Thursday, March 1, 2018 02:57
To: Michael O'Brien <frank.obr...@amdocs.com>
Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi,
I followed the above steps but when I run "./cd.sh -b master" it gives multiple 
errors similar to the following error:
Error: configmaps is forbidden: User 
"system:serviceaccount:kube-system:default" cannot list configmaps in the 
namespace "kube-system"
Error from server (NotFound): namespaces "onap-mso" not found
Error from server (NotFound): 
clusterrolebindings.rbac.authorization.k8s.io<http://clusterrolebindings.rbac.authorization.k8s.io>
 "onap-mso-admin-binding" not found
Service account onap-mso-admin-binding deleted.
I checked and found that all the folders like mso, aaf etc. are present in 
/oom/kubernetes/.
After many errors similar to the above one, it loops on "waiting for config pod 
to complete. No resources found."

Please help. What am I missing?
Thank you

On Tue, Feb 27, 2018 at 10:19 PM, ANKIT ROHILLA 
<ankit.rohill...@gmail.com<mailto:ankit.rohill...@gmail.com>> wrote:
Thank you so much for the above procedure. I'll try it and let you know if any 
problem is encountered.

Regards
Ankit Rohilla

On Feb 27, 2018 10:15 PM, "Michael O'Brien" 
<frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> wrote:
Ankit,
   Hi, the help page has been adjusted so that the automated scripts can be run 
while they are being reviewed (not in the OOM repo yet).  The goal of OOM-710 
is a one-click HEAT/ARM/CloudFormation template that runs 
oom_rancher_install.sh and cd.sh in sequence – this is being worked on – 
avoiding any manual DevOps

https://jira.onap.org/browse/OOM-710

   As of today the rancher RI installation for Kubernetes, Helm, Docker is 
fully automated to run on Ubuntu 16.04 VM on any cloud provider below
   The cd.sh deployment of ONAP via OOM script is also in review but documented 
on the wiki

https://wiki.onap.org/display/DW/ONAP+on+Kubernetes
You can run the 2 scripts manually for now in sequence until they are finished 
testing on the Heat and Arm templates.

Example End to End Kubernetes based ONAP install and deployment
Scenario: installing Rancher on clean Ubuntu 16.04 64g VM (single collocated 
server/host)
Note: amsterdam will require a different onap-parameters.yaml
Either
git clone https://gerrit.onap.org/r/oom
cd oom
git pull https://gerrit.onap.org/r/oom refs/changes/19/32019/6
cd install/rancher
./oom_rancher_install.sh -b master -s 192.168.241.132 -e onap


or using temporary attachments until the gerrit review is done
wget https://jira.onap.org/secure/attachment/7/oom_rancher_setup.sh
./oom_rancher_setup.sh -b master -s 10.12.5.168 -e onap
# wait about 15 min to completion


clone continuous deployment script - until it is merged
wget https://jira.onap.org/secure/attachment/11122/cd.sh
chmod 777 cd.sh
wget 
https://jira.onap.org/secure/attachment/11124/aaiapisimpledemoopenecomporg.cer
wget https://jira.onap.org/secure/attachment/11125/onap-parameters.yaml
wget https://jira.onap.org/secure/attachment/11126/aai-cloud-region-put.json
./cd.sh -b master
# wait about 25-60 min d

Re: [onap-discuss] Regarding Full ONAP installation

2018-02-27 Thread Michael O'Brien 
Ankit,
   Hi, the help page has been adjusted so that the automated scripts can be run 
while they are being reviewed (not in the OOM repo yet).  The goal of OOM-710 
is a one-click HEAT/ARM/CloudFormation template that runs 
oom_rancher_install.sh and cd.sh in sequence – this is being worked on – 
avoiding any manual DevOps

https://jira.onap.org/browse/OOM-710

   As of today the rancher RI installation for Kubernetes, Helm, Docker is 
fully automated to run on Ubuntu 16.04 VM on any cloud provider below
   The cd.sh deployment of ONAP via OOM script is also in review but documented 
on the wiki

https://wiki.onap.org/display/DW/ONAP+on+Kubernetes
You can run the 2 scripts manually for now in sequence until they are finished 
testing on the Heat and Arm templates.

Example End to End Kubernetes based ONAP install and deployment
Scenario: installing Rancher on clean Ubuntu 16.04 64g VM (single collocated 
server/host)
Note: amsterdam will require a different onap-parameters.yaml
Either
git clone https://gerrit.onap.org/r/oom
cd oom
git pull https://gerrit.onap.org/r/oom refs/changes/19/32019/6
cd install/rancher
./oom_rancher_install.sh -b master -s 192.168.241.132 -e onap


or using temporary attachments until the gerrit review is done
wget https://jira.onap.org/secure/attachment/7/oom_rancher_setup.sh
./oom_rancher_setup.sh -b master -s 10.12.5.168 -e onap
# wait about 15 min to completion


clone continuous deployment script - until it is merged
wget https://jira.onap.org/secure/attachment/11122/cd.sh
chmod 777 cd.sh
wget 
https://jira.onap.org/secure/attachment/11124/aaiapisimpledemoopenecomporg.cer
wget https://jira.onap.org/secure/attachment/11125/onap-parameters.yaml
wget https://jira.onap.org/secure/attachment/11126/aai-cloud-region-put.json
./cd.sh -b master
# wait about 25-60 min depending on the speed of your network pulling docker 
images



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Roger Maitland
Sent: Tuesday, February 27, 2018 09:17
To: ANKIT ROHILLA <ankit.rohill...@gmail.com>; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Regarding Full ONAP installation

Hi Ankit,

There are several options available depending on the specific Kubernetes 
infrastructure you are using and instructions to create an appropriate 
environment if you don’t already have one.  This is the wiki page you should 
start with to create your environment: 
https://wiki.onap.org/display/DW/ONAP+on+Kubernetes.  Note that this is a 
one-time effort that can be reused for multiple ONAP (or other) deployments.

Once you have an environment available, follow the instructions in the Quick 
Start Guide: 
https://wiki.onap.org/display/DW/ONAP+Operations+Manager+Project#ONAPOperationsManagerProject-QuickStartGuide

Cheers,
Roger

From: 
<onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of ANKIT ROHILLA 
<ankit.rohill...@gmail.com<mailto:ankit.rohill...@gmail.com>>
Date: Monday, February 26, 2018 at 11:04 AM
To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
<onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>>
Subject: [onap-discuss] Regarding Full ONAP installation

Hello team,
I went through the documentation on setting up entire ONAP using docker and 
kubernetes. But there is not any straight forward procedure given that I can 
follow.
Is there any pdf or ppt made by you guys just for the installation of ONAP 
using Kubernetes. Please share it with me.
If not, then please update the docs because its very complicated and difficult 
to understand. The steps are not specified clearly.
I would really appreciate it if you could share something with me. It would be 
a lot helpful.
Thanks and Regards,
Ankit Rohilla
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at https://www.amdocs.com/about/email-disclaimer
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 
<https://www.amdocs.com/about/email-disclaimer>
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Regarding Full ONAP installation

2018-02-27 Thread Roger Maitland 
Hi Ankit,

There are several options available depending on the specific Kubernetes 
infrastructure you are using and instructions to create an appropriate 
environment if you don’t already have one.  This is the wiki page you should 
start with to create your environment: 
https://wiki.onap.org/display/DW/ONAP+on+Kubernetes.  Note that this is a 
one-time effort that can be reused for multiple ONAP (or other) deployments.

Once you have an environment available, follow the instructions in the Quick 
Start Guide: 
https://wiki.onap.org/display/DW/ONAP+Operations+Manager+Project#ONAPOperationsManagerProject-QuickStartGuide

Cheers,
Roger

From:  on behalf of ANKIT ROHILLA 

Date: Monday, February 26, 2018 at 11:04 AM
To: "onap-discuss@lists.onap.org" 
Subject: [onap-discuss] Regarding Full ONAP installation

Hello team,
I went through the documentation on setting up entire ONAP using docker and 
kubernetes. But there is not any straight forward procedure given that I can 
follow.
Is there any pdf or ppt made by you guys just for the installation of ONAP 
using Kubernetes. Please share it with me.
If not, then please update the docs because its very complicated and difficult 
to understand. The steps are not specified clearly.
I would really appreciate it if you could share something with me. It would be 
a lot helpful.
Thanks and Regards,
Ankit Rohilla
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss