[openthinclient-user] Windows 2012 Secondary LDAP synchronization

[Mican Jindrich]

Hello,

I lately tried to test "secondary LDAP synchronization" and it does work with 
Windows Server 2008 LDAP but it does not work with Windows Server 2012 LDAP... 
or maybe it is problem on my side but did anyone actualy tried? If yes, can you 
give me some anonymous information how did you set it up, please?

I hope no problem with 2008, it works nicely, but 2012 is like dead end, 
nothing works.

Thank you.

Henry

--
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] create a OpenThinClient Application out of a existing deb package

[Mican Jindrich]

Heya,

first of all, go through this really slowly 
http://wiki.openthinclient.org/wiki/Pakete-Entwickeln/en ... After you will get 
points from this, then ask more, because it is quite easy but difficult when 
you don't know almost anything about it.

Henry

Von: Eagle [mailto:off...@eagle.at]
Gesendet: Dienstag, 02. Juni 2015 01:30
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] create a OpenThinClient Application out of a 
existing deb package

Hi!

I want to create a OTC Application out of an existing deb package.
Is there a working howto anywhere? I've found a lot of dead links and the wiki 
on OTC webpage is useless...

Regards
Chris
--
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] OTC - Jessie?

[Mican Jindrich]

Hello,

I wanted to ask if there is plan to upgrade OTC deployed client to "Jessie" 
while I start to have compatibility issues of drivers etc due to "Wheezy" base 
of OTC client.

Some stuff just does not work like IntedHD GPU acceleration or some repacking 
based on that. I have aswell issues with some USB 3 sticks etc and I would bet 
that base of "Wheezy" is the problem and it will for sure be a problem in near 
future.

Thanks for any hints or answer.

Henry
--
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Configure Dual View for Thin Clients

[Mican Jindrich]

Hello Andreas,

yes, it is - but it really depends to what port is display conneceted etc, you 
might want to make dualview device connected to "Hardware Type" which you are 
using or of course you can do it 1to1 through clients.. But yeah, HW types are 
easier way to make it for more thin clients.

Henry


Von: Andreas Fuchsberger, T&F Computer und Networksystems GmbH 
[mailto:a.fuchsber...@tf-systems.at]
Gesendet: Donnerstag, 28. Mai 2015 09:51
An: 'openthinclient-user@lists.sourceforge.net'
Betreff: [openthinclient-user] Configure Dual View for Thin Clients

Hy!

We have installed the Open Thinclient Server and now we have about 10 different 
kinds of thinclients.

Most of them want to use Dual View.

Is it possible to make a general setting for Dual View ?

Thank you very much for your help.

Mit freundlichen Grüßen
Andreas Fuchsbergere
[Signatur-Bild-Andi]as Fuchsberger
www.tf-systems.at
a.fuchsber...@tf-systems.at

Telefon +43(0)6474 / 26 988
Mobil +43(0)660 / 26 988 15

TF Computer und Networksystems GmbH
Kuenburgstrasse 9
A - 5580 Tamsweg
ATU 535 10 70 3
215844-v

Diese Nachricht, einschliesslich allfälliger Anhänge bzw. Dateien, enthält 
vertrauliche und rechtlich geschützte Informationen und ist ausschliesslich für 
den bezeichneten Empfänger bestimmt. Sollten Sie dieses E-Mail irrtümlich 
erhalten haben, so bitten wir Sie dieses sofort und unwiderruflich zu löschen. 
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieses E-Mails ist nicht 
gestattet und kann Rechtsfolgen nach sich ziehen.


--
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Intel HD graphics without accelerated decoding

[Mican Jindrich]

Hello,

I have came across one quite difficult problem and that are slow stream video 
on Intel HD integrated graphic cards, easier way for anyone to try it out is to 
start browser in OTC linux desktop and play YouTube videos. Sadly on all 
clients videos have major tearing in fullscreen even that thin clients should 
have good enough hardware to play them smoothly. (All cores go up to 80-100%)

I tried to install / upgrade Intel graphic drivers but nothing really helped.

Any idea how to make it work?

Thank you in advance.

Henry
--
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Network printer - RDP redirection

[Mican Jindrich]

Hello,

wanted to ask if anyone was solving network printer redirection with 
openthinclient Consus 2.0?
I have CUPS client on server, got printers set and I want to redirect them as 
they would be local printers (not me, but collegue wants it that way). I have 
found it kinda impossible, I can do it other way around - to just set CUPS and 
then connect the printer to Windows session on another side, but while it 
should print even on the client without RDP session, I don't know how to sort 
that out.

Any ideas?

Thank you.

Henry

--
One dashboard for servers and applications across Physical-Virtual-Cloud 
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Openthinclient - Autostart

[Mican Jindrich]

By the "icon" I mean application with autostart in schema... done in same way 
as any other applications are... but it simply does not work and I have no idea 
why...

Von: Mican Jindrich [mailto:jindrich.mi...@lgnexera.at]
Gesendet: Mittwoch, 13. Mai 2015 14:17
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] Openthinclient - Autostart

Hello,

I have big problem regarding autostart option for commandline and custom made 
applications. Autostart seems to not work, I have even tried to make icon which 
should be schema autostart but it does not. Implemented "Commandline" option 
does not autostart aswell. Only applications that autostart are FreeRDP or 
rdesktop, but other applications seem to not work in this way.

I am using Consus 2.0...

Anyone encountered such a problem?

Thank you.

Henry

--
One dashboard for servers and applications across Physical-Virtual-Cloud 
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Openthinclient - Autostart

[Mican Jindrich]

Hello,

I have big problem regarding autostart option for commandline and custom made 
applications. Autostart seems to not work, I have even tried to make icon which 
should be schema autostart but it does not. Implemented "Commandline" option 
does not autostart aswell. Only applications that autostart are FreeRDP or 
rdesktop, but other applications seem to not work in this way.

I am using Consus 2.0...

Anyone encountered such a problem?

Thank you.

Henry

--
One dashboard for servers and applications across Physical-Virtual-Cloud 
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] No sound when running xfreerdp

[Mican Jindrich]

Heya,

are you really talking about freerdp? I have no problem with that one when it 
comes to sound redirection… But rdesktop I cannot get to redirect sound at all…

Henry

Von: Dalton D [mailto:doubled...@gmail.com]
Gesendet: Mittwoch, 15. April 2015 19:50
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] No sound when running xfreerdp

Hello again,

While continuing to test Consus, I've run into another issue: I can't get any 
sound when running xfreerdp with /sound.
Why can't I run freerdp from the desktop, you ask? Well, it just loops with the 
"enter your username and password" prompt. But that isn't what this post is 
about.
Upon further investigation, it seems to be looking for *.so files in the 
/usr/lib./i386-linux-gnu/freerdp directory, which doesn't exist. I get errors 
like, "LoadLibraryA: /usr/lib./i386-linux-gnu/freerdp/rdpsnd-client-alsa.so: 
cannot open shared object file: No such file or directory"

I'm assuming that there needs to be an update posted for the freerdp package in 
order to remedy this, but I'll try anything that I can to help.

Thank you for your time
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] RDP with ip choice

[Mican Jindrich]

Hello,

Oh well, you could if you would edit files in “TCOS” directory…

If you will pull git with openthinclient packages, you should be able to at 
least try changing package of rdekstop/FreeRDP in way that it would ask you for 
ip address on start.

I think it is possible, but it needs some editing.

Henry

Von: led import [mailto:ledimpor...@gmail.com]
Gesendet: Montag, 13. April 2015 15:30
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] RDP with ip choice

Hi all,
Is there a way to make any rdp application to ask for the RDP server ip instead 
of having a fixed one?
My goal is fir the users to double click on rdesktop and be asked to which TS 
server they want to connect.
Thank you.
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Openthinclient - Black screen with Autologin enabled

[Mican Jindrich]

Heya,

Have you tried not adding display at all to PXE client?
If you have add wrong display it might generate error.

Henry


Von: Dalton D [mailto:doubled...@gmail.com]
Gesendet: Montag, 13. April 2015 14:40
An: openthinclient-user@lists.sourceforge.net
Betreff: Re: [openthinclient-user] Openthinclient - Black screen with Autologin 
enabled

This is, unfortunately, on a physical machine: an AMD Athlon 5350 system with 
4GB RAM.

On Mon, Apr 13, 2015 at 3:37 AM, Mican Jindrich 
mailto:jindrich.mi...@lgnexera.at>> wrote:
Hello,

exactly same thing happened to me when I tried to virtualize the client on 
Hyper-V. On my test thin client it actually works.
What is your client setup? Is it Hyper-V or thin client or …?

Henry


Von: Dalton D [mailto:doubled...@gmail.com<mailto:doubled...@gmail.com>]
Gesendet: Freitag, 10. April 2015 22:45
An: 
openthinclient-user@lists.sourceforge.net<mailto:enthinclient-u...@lists.sourceforge.net>
Betreff: [openthinclient-user] Openthinclient - Black screen with Autologin 
enabled

This is my first time trying a mailing list, apologies if I'm doing it wrong.

I'm demoing Openthinclient Consus as a possible option for deployment. I've 
gotten the server and manager set up, a client registered, and got it to boot. 
But then I hit a roadblock: the system would show boot messages, then go back 
to a screen with only a blinking cursor, then the monitor would turn off. I 
tried multiple different configurations and proceeded made my own display 
"Device" to try and get this to work.
Then, I switched to a different device type instead. Lo and behold, it worked, 
but I had to log in. Thinking that it was just my device type that was causing 
the issue, I added Autologin to this one. After this, the thin client wouldn't 
show a desktop any more.

So, there seems to either be an issue with autologin in Consus, or I've 
configured something wrong. Any ideas on which?

--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Openthinclient - Black screen with Autologin enabled

[Mican Jindrich]

Hello,

exactly same thing happened to me when I tried to virtualize the client on 
Hyper-V. On my test thin client it actually works.
What is your client setup? Is it Hyper-V or thin client or …?

Henry


Von: Dalton D [mailto:doubled...@gmail.com]
Gesendet: Freitag, 10. April 2015 22:45
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] Openthinclient - Black screen with Autologin 
enabled

This is my first time trying a mailing list, apologies if I'm doing it wrong.

I'm demoing Openthinclient Consus as a possible option for deployment. I've 
gotten the server and manager set up, a client registered, and got it to boot. 
But then I hit a roadblock: the system would show boot messages, then go back 
to a screen with only a blinking cursor, then the monitor would turn off. I 
tried multiple different configurations and proceeded made my own display 
"Device" to try and get this to work.
Then, I switched to a different device type instead. Lo and behold, it worked, 
but I had to log in. Thinking that it was just my device type that was causing 
the issue, I added Autologin to this one. After this, the thin client wouldn't 
show a desktop any more.

So, there seems to either be an issue with autologin in Consus, or I've 
configured something wrong. Any ideas on which?
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] OpenThinClient Servers

[Mican Jindrich]

Oh well, I am not really sure about that. Only thing you want to have 
synchronized are actually settings, but other than that, OTC Server itself is 
just tool for creating PXE boot-up to RDP. So, there is no problem for setting 
more servers and just copy-cat the settings. If you will have custom packages, 
you can still deploy them on one server from which will rest of servers be 
updating from.

About synchronization itself I am not really sure. How many employees are in 
your company?

Btw, I am just an user of TCO. (But I was stuck myself at some questions, so I 
kinda like to help or direct another ppl..)

Henry

Von: Dave Wakelam [mailto:dave.wake...@bullivantmedia.com]
Gesendet: Mittwoch, 08. April 2015 12:51
An: 'openthinclient-user@lists.sourceforge.net'
Betreff: [openthinclient-user] OpenThinClient Servers

We have a few remote offices and would like to put a OpenThinClient server in 
each office, is it possible to have these servers synchronising back to a main 
openthinclient server in our Head Office.

Regards

Dave Wakelam
IT Manager
Bullivant Media Ltd
Webb House, Church Green East, Redditch, Worcestershire. B98 8BP
t: 01527 453 777 f: 01527 584 371 m: 0753 087 9690
www.bullivantmedia.com
[cid:image001.jpg@01D07209.2D63ED20]



Head Office:
Bullivant Media Ltd
The Old Library
Church Road
Redditch
B97 4DU

(PLEASE NOTE: THIS IS NOT A DELIVERY ADDRESS FOR LEAFLETS)

Tel: 01527 588688
Registered in England & Wales. No. 6850612
Vat No. 971117625

Registered Office:
Bullivant Media Limited
St David's Court
Union Street
Wolverhampton
WV1 3JE

This e-mail transmission is intended solely for the person or organisation to 
whom it is addressed. It may contain confidential and privileged information. 
If you are not the intended recipient, you must not copy, distribute or 
disseminate the information, or take any action in reliance of it. If you have 
received this message in error, do not open any attachment but please notify 
the sender and delete this message from your system. Bullivant Media Ltd 
reserves the right to monitor all e-mail communications through its networks 
and whilst all reasonable care has been taken to ensure that this e-mail and 
any attachments are virus free, no responsibility is accepted by Bullivant 
Media Ltd in this regard. Any views expressed in this message are those of the 
individual sender, except where the message states otherwise and the sender is 
authorised to state them to be the views of the entity concerned. No 
responsibility is accepted by Bullivant Media Ltd for personal e-mails or 
e-mails unconnected with the firm's or our clients' business. Unless otherwise 
stated, nothing in this email shall constitute a binding contract on Bullivant 
Media Ltd and any/all 'offers' or 'acceptance' are Subject to Contract. Only 
individuals with registered Company Director status have the authority to bind 
Bullivant Media Ltd.
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Server 2012 TS

[Mican Jindrich]

Hello Daniel,

depends what RDP client are you using - it is pretty possible to do it with 
both FreeRDP and rdesktop... but from what I know, you will have to compile 
newest rdesktop, because just version 1.8.3 can connect to Windows 2012 TS.

Best regards,

Henry

Von: Daniel Veiga [mailto:daniel.ve...@sinuta.pt]
Gesendet: Mittwoch, 08. April 2015 11:23
An: openthinclient-user@lists.sourceforge.net
Betreff: [openthinclient-user] Server 2012 TS

Good morning,

I find out the OTC one month ago and at the begining I loved the product but 
now I'm stuck in one little problem.

How can I redirect the user automatically RDP to my Windows server 2012? I need 
that all users when starts the terminal open the rdp and it's done.


Cumprimentos,
[DV-2]

AVISO DE CONFIDENCIALIDADE  -  Esta mensagem é destinada apenas para a entidade 
ou pessoa a quem vai dirigida. Pode conter informação confidencial ou 
legalmente protegida. Se recebeu esta mensagem por engano, pedimos-lhe que a 
apague do seu sistema, assim como quaisquer cópias e notifique o remetente o 
mais brevemente possível. Não deve, directa ou indirectamente, usar, revelar, 
distribuir, imprimir ou copiar qualquer parte desta mensagem se não for o seu 
destinatário.
CONFIDENTIALITY NOTICE - This message is intended exclusively for the named 
entity or person. It may contain confidential or legally/secured information. 
If you received this message in error, please immediately delete it and all 
copies of it from your system and notify the sender as soon as possible. You 
must not, directly or indirectly, use, disclose, distribute, print or copy any 
part of this message if you are not the intended recipient.
AVIS CONFIDENCIEL - Ce message est seulement destiné aux entités ou personnes à 
qui il est dirigé. Il peut contenir des informations confidentielles ou 
légalement protégées. Si vous avez reçu ce message par erreur, nous vous 
demandons de l'effacer de votre système, ainsi que toute copie notifiant 
l'expéditeur le plus rapidement possible. Vous ne devez pas, direct ou 
indirectement, utiliser, révéler, distribuer, imprimer ou copier n'importe 
quelle partie de ce message si vous n'êtes pas son destinataire.


--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] video black with curser

[Mican Jindrich]

Hi Mark & Jack,

I think it is really hardware related issue while I didn't have this kind of 
problems with both LG and Samsung monitors. It is probably about HP.

I never got Thinstation to work properly or at least I had issues regarding 
some functions I really needed, even that smart card redirection does not form 
fully for me in Openthinclient yet.

Henry

Von: Jack Sengers [mailto:j...@bydlofts.com]
Gesendet: Mittwoch, 08. April 2015 05:35
An: openthinclient-user@lists.sourceforge.net
Betreff: Re: [openthinclient-user] video black with curser

Hi Mark,

I have the same problem with some HP all in one types, reported this problem in 
this list but received no comments.
I use Thinstation now for these computers without any graphical issues but it 
takes more time to load.

Jack

From: Brian D. Carstens [mailto:brian.carst...@htsusa.com]
Sent: Wednesday, April 08, 2015 5:57 AM
To: Sourceforge 
(openthinclient-user@lists.sourceforge.net)
Subject: [openthinclient-user] video black with curser

Hi,

We have been running on Openthinclient successfully for several years now, 
using various PC's. It works great.

Recently we started an upgrade project to use the Consus appliance. Here are 
show-stopper video problems we run into:

display works while booting, but as soon as it goes into graphic mode the 
screen goes black with a blinking cursor in the upper left corner.

I've tried out a number of monitors, as well as a variety of Openthinclient 
settings. The old system works so well. What am I missing with the new system?


Thanks,


Mark

--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Cyberjack e-com plus not wokring

[Mican Jindrich]

Well, I don't even think that it is fault of OTC, I just thought that someone 
here might have similiar experience...

Von: Stecher, Alexander [mailto:a.stec...@openthinclient.com]
Gesendet: Dienstag, 24. März 2015 17:24
An: Mailingliste
Betreff: Re: [openthinclient-user] Cyberjack e-com plus not wokring

I think you should inquire Reiner or rdesktop.
It seems not to be an issue on the openthinclient-manager or openthinclient-OS 
side...

Alexander Stecher
--
Dipl.-Ing. (BA)
Telefon: +49 711 1378636-1
Handy:   +49 151 2761 2961
mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>


openthinclient gmbh
Heilbronner Str. 150, 70191 Stuttgart, Deutschland
Telefon: +49 711 1378636-0
Telefax: +49 711 1378636-9
Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092
Geschäftsführer: Alexander Stecher
http://openthinclient.com

2015-03-24 16:47 GMT+01:00 Mican Jindrich 
mailto:jindrich.mi...@lgnexera.at>>:
Hello,

I have moved onward with everything... made rdesktop 1.8.3 and pscs-lite 1.8.13 
for my dev-site but it seems that it did not work as I have expected.
Don't get me wrote, but application working properly. I have even updated 
schema, so I can add smart card with an option in menu etc... after all it is 
kinda easy.

But I have problems with Smartcard reader from REINER SCT - Cyberjack e-com 
plus which does not simply work even with its own drivers, that are provided on 
web-site. I was trying older rdesktop aswell as the new one I have made, same 
for pcsc-lite including latest drivers from Reiner...

RDP destination is Windows 2008 R2 SP1 with Reiner SCT SW installed.

On mini client everything works as expected, remote desktop works, USB support 
works, but when I do test of card reader then everything is fine, but I do not 
see attributes of card in card reader. On thin-client pcscd does see the card 
and reader.. pcsc_scan confirms that everything works as expected, but on 
server side ... attributes of card gets lost (reader itself shows just fine, SW 
reacts on card being in reader or not). How come? Is it common problem of 
REINER SCT - Cyberjack e-com or is it another problem?

Thank you in advance.

Henry

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Cyberjack e-com plus not wokring

[Mican Jindrich]

Hello,

I have moved onward with everything... made rdesktop 1.8.3 and pscs-lite 1.8.13 
for my dev-site but it seems that it did not work as I have expected.
Don't get me wrote, but application working properly. I have even updated 
schema, so I can add smart card with an option in menu etc... after all it is 
kinda easy.

But I have problems with Smartcard reader from REINER SCT - Cyberjack e-com 
plus which does not simply work even with its own drivers, that are provided on 
web-site. I was trying older rdesktop aswell as the new one I have made, same 
for pcsc-lite including latest drivers from Reiner...

RDP destination is Windows 2008 R2 SP1 with Reiner SCT SW installed.

On mini client everything works as expected, remote desktop works, USB support 
works, but when I do test of card reader then everything is fine, but I do not 
see attributes of card in card reader. On thin-client pcscd does see the card 
and reader.. pcsc_scan confirms that everything works as expected, but on 
server side ... attributes of card gets lost (reader itself shows just fine, SW 
reacts on card being in reader or not). How come? Is it common problem of 
REINER SCT - Cyberjack e-com or is it another problem?

Thank you in advance.

Henry
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Old packages - any help whatsoever?

[Mican Jindrich]

Hello Alexander,


1)  That´s great news. :) I meant that on forum, there are mostly no 
answers since January, mostly are people asking, but in 2014 you could see even 
answers, now no so much. I´ll check the link, thank you.

2)  Well, it is called v1.8.2 but when I look in thinclient into command 
line and will write rdesktop -ver, it will show me 1.7.1 which is confusing, 
even when I selected 1.8.2 in manager.

3)  I have already made some, but I think that my problem is mostly aimed 
somewhere else - more into compatibility issues with current hardware... more 
into rdp communication of card reader that I am using.. Driver works fine, but 
it is not forwarding attributes about card inside etc.

4)  I see. Thank you.

Best regards,

Henry

Von: Stecher, Alexander [mailto:a.stec...@openthinclient.com]
Gesendet: Donnerstag, 19. März 2015 16:44
An: Mailingliste
Betreff: Re: [openthinclient-user] Old packages - any help whatsoever?

Hello Henry,
1) yes, the project is alive.
"I don´t see any answers since year 2015" -> I think, it is currently 2015 ;-)
Please have a look at
http://archive.openthinclient.org/openthinclient/
for example.
2) our current rdesktop package is V1.8.2, this is the quite new, it is only 
one newer version available.
3) If you want to build own packages, have a look here:
https://wiki.openthinclient.org/confluence/display/DOO/Entwicklersektion
(currently only in German available)

4) The openthinclient company can assist you with configuration, customization, 
education.
This service is with charge.
http://openthinclient.com/service/?lang=en

Or you can use the "free" service, this is the mailing-list.
The mailinglist is a free comunity-tool, you don't have a guarantee, that your 
questions will be answered.

Regards.

Alexander Stecher
--
Dipl.-Ing. (BA)
Telefon: +49 711 1378636-1
Handy:   +49 151 2761 2961
mailto:a.stec...@openthinclient.com<mailto:a.stec...@openthinclient.com>


openthinclient gmbh
Heilbronner Str. 150, 70191 Stuttgart, Deutschland
Telefon: +49 711 1378636-0
Telefax: +49 711 1378636-9
Amtsgericht Stuttgart: HRB 245177; USt-ID: DE216017092
Geschäftsführer: Alexander Stecher
http://openthinclient.com

2015-03-19 16:16 GMT+01:00 Mican Jindrich 
mailto:jindrich.mi...@lgnexera.at>>:
Hello,

sorry for quite a lot messages, but I wanted to ask just few question... 
hopefully they will be ever answered...


1)  Is this project even alive? I don´t see any answers since year 2015. I 
am trying to make some breakthrough in using OTC but without help I will be 
probably damned - already playing with it for almost 2 weeks.

2)  Will there be new packages for rdesktop or smart-card lite ... (or well 
pcsc-lite) which are out and are actually improving something..?

3)  Is there a way to get explained how to make something which comes in 
tar.bz2 to be tcos/deb file... I am kinda trying to learn it all, but it is 
hard when I am getting into linux stuff for 11days (even that I think I have 
made great progress)

4)  I could even assist with helping community if I would get more 
information how to actually work with OTC in general and would be able to 
create something valuable... But without answers, I can hardly get more far 
than I am.

I am kind of sad that I see such a project being frozen in time..

Hopefully I will have some answers from someone...

Thank you

"Henry" - J.M.

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Re: [openthinclient-user] Old packages - any help whatsoever?

[Mican Jindrich]

Hello Jörn,

yes, I am using version OTC 2.0 - Consus.
Problem is not much regarding OTC but with apps inside - rdesktop & smart-card 
lite which are outdated a bit. That I think might cause some problems.
Yep, I have read about package building, but mostly having issues with making 
completely new ones which are not in .deb structure.

Regards.

Henry

-Ursprüngliche Nachricht-
Von: Jörn Frenzel [mailto:j.fren...@openthinclient.com] 
Gesendet: Donnerstag, 19. März 2015 17:14
An: openthinclient-user@lists.sourceforge.net
Betreff: Re: [openthinclient-user] Old packages - any help whatsoever?

Hello Henry,

are you sure trying on openthincleint version 2.x? OTC is still being 
developed. We have just released Version 2.1.

Have you read:
http://wiki.openthinclient.org/wiki/Pakete-Entwickeln
?

Regards, Jörn


Am 19.03.2015 um 16:16 schrieb Mican Jindrich:
> Hello,
>
> sorry for quite a lot messages, but I wanted to ask just few question. 
> hopefully they will be ever answered.
>
> 1)Is this project even alive? I don´t see any answers since year 2015. 
> I am trying to make some breakthrough in using OTC but without help I 
> will be probably damned - already playing with it for almost 2 weeks.
>
> 2)Will there be new packages for rdesktop or smart-card lite . (or 
> well
> pcsc-lite) which are out and are actually improving something..?
>
> 3)Is there a way to get explained how to make something which comes in
> tar.bz2 to be tcos/deb file. I am kinda trying to learn it all, but it 
> is hard when I am getting into linux stuff for 11days (even that I 
> think I have made great progress)
>
> 4)I could even assist with helping community if I would get more 
> information how to actually work with OTC in general and would be able 
> to create something valuable. But without answers, I can hardly get 
> more far than I am.
>
> I am kind of sad that I see such a project being frozen in time..
>
> Hopefully I will have some answers from someone.
>
> Thank you
>
> "Henry" - J.M.
>
>
>
> --
>  Dive into the World of Parallel Programming The Go Parallel 
> Website, sponsored by Intel and developed in partnership with Slashdot 
> Media, is your hub for all things parallel software development, from 
> weekly thought leadership blogs to news, videos, case studies, 
> tutorials and more. Take a look and join the conversation now. 
> http://goparallel.sourceforge.net/
>
>
>
> ___
> The Open Source Thin Client Solution http://openthinclient.org 
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored 
by Intel and developed in partnership with Slashdot Media, is your hub for all 
things parallel software development, from weekly thought leadership blogs to 
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
___
The Open Source Thin Client Solution http://openthinclient.org 
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Old packages - any help whatsoever?

[Mican Jindrich]

Hello,

sorry for quite a lot messages, but I wanted to ask just few question... 
hopefully they will be ever answered...


1)  Is this project even alive? I don´t see any answers since year 2015. I 
am trying to make some breakthrough in using OTC but without help I will be 
probably damned - already playing with it for almost 2 weeks.

2)  Will there be new packages for rdesktop or smart-card lite ... (or well 
pcsc-lite) which are out and are actually improving something..?

3)  Is there a way to get explained how to make something which comes in 
tar.bz2 to be tcos/deb file... I am kinda trying to learn it all, but it is 
hard when I am getting into linux stuff for 11days (even that I think I have 
made great progress)

4)  I could even assist with helping community if I would get more 
information how to actually work with OTC in general and would be able to 
create something valuable... But without answers, I can hardly get more far 
than I am.

I am kind of sad that I see such a project being frozen in time..

Hopefully I will have some answers from someone...

Thank you

"Henry" - J.M.
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Smartcard redirection does not work properly (REINER SCT) - token/chip card not visible

[Mican Jindrich]

Hello,

past last week I have improved in making packages etc, but I still have problem 
with proper smart card (chip card) redirection.
I use REINER SCT device with token and while I see it on remote desktop 
(Windows Server 2008 R2 SP1) when I test it I do not see ATR of token. Other 
than that test does end with full success. BUT... when I try using it with 
A.TRUST application, it does tell me that I do not have token in smart card 
reader.

That does actually bother me while I need make that work.
I tried using smart card lite, I did manage to combine it with proper driver 
for Debian aswell, but I did not have better result than this.
I can say that RDP session (W2k8R2) does see REINER SCT SC reader, but it 
cannot see the token.

Anybody knows what to do with it?

Btw, there is rdesktop version 1.8.3, but still not for openthinclient... :( (I 
am not that far to actualy make package like this...)

Thank you in advace.

"Henry" - J.M.
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] Openthin client census vs driver for smart card reader

[Mican Jindrich]

Hello,

I am quite new to Openthinclient and I am trying to figure out how to correctly 
install driver packages for smart-card reader from REINER - SCT - Cyberjack 
Chipcard reader...
I tried many ways and never succeeded. I am always getting "Package isn´t 
formatted correctly".

Smart card reader works, but when I enter card, I do not actually see any.

Setup:

Ubuntu 14.04 LTS - Openthinclient census - RDP through rdesktop to Windows 2008 
R2 test desktop. There I have everything installed, I can actualy verify that 
through it, reader works, but I cannot read cards through RDP desktop. Diagnose 
of reader works. (reader is connected to Mini-PC from ZOTAC) Cards do not.

I tried to make my own package for installing drivers REINER SCT - Cyberjack - 
Chipcard reader - Ubuntu 14.04 64bit...
But description of how to make such drivers is really thin, mostly I cannot 
even find on web that would be someone making their own drivers for any use. I 
just found that 64bit might be problematic and I would like to find out if it 
is the case or if I am just too new to make drivers in correct way. I was 
trying to use the wiki, but seriously for such a thing as drivers, there is 
nothing really described. My college told me that there used to be video 
describing how to make graphic drivers from which he managed to do something 
similar, but I did not find anything like that, so I am really unsure of how to 
do it absolutely correctly...

Can anyone help me, please?

Thank you very much in advance.

Best regards

Jindrich Mican
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

[openthinclient-user] WG: Openthin client census vs driver for smart card reader

[Mican Jindrich]

Hello,

I am quite new to Openthinclient and I am trying to figure out how to correctly 
install driver packages for smart-card reader from REINER - SCT - Cyberjack 
Chipcard reader...
I tried many ways and never succeeded. I am always getting "Package isn´t 
formatted correctly".

Smart card reader works, but when I enter card, I do not actually see any.

Setup:

Ubuntu 14.04 LTS - Openthinclient census - RDP through rdesktop to Windows 2008 
R2 test desktop. There I have everything installed, I can actualy verify that 
through it, reader works, but I cannot read cards through RDP desktop. Diagnose 
of reader works. (reader is connected to Mini-PC from ZOTAC) Cards do not.

I tried to make my own package for installing drivers REINER SCT - Cyberjack - 
Chipcard reader - Ubuntu 14.04 64bit...
But description of how to make such drivers is really thin, mostly I cannot 
even find on web that would be someone making their own drivers for any use. I 
just found that 64bit might be problematic and I would like to find out if it 
is the case or if I am just too new to make drivers in correct way. I was 
trying to use the wiki, but seriously for such a thing as drivers, there is 
nothing really described. My college told me that there used to be video 
describing how to make graphic drivers from which he managed to do something 
similar, but I did not find anything like that, so I am really unsure of how to 
do it absolutely correctly...

Can anyone help me, please?

Thank you very much in advance.

Best regards

Jindrich Mican
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/___
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user