[OpenWrt-Devel] [PATCH] [packages] tcpdump: new upstream release 4.2.1
Signed-off-by: Gabriel Kerneis kern...@pps.jussieu.fr --- net/tcpdump/Makefile |6 +- net/tcpdump/patches/001-remove_pcap_debug.patch|2 +- .../patches/002-remove_static_libpcap_check.patch | 15 +- net/tcpdump/patches/004-fix_3g_iface.patch |4 +- net/tcpdump/patches/100-tcpdump_mini.patch | 662 ++-- 5 files changed, 336 insertions(+), 353 deletions(-) diff --git a/net/tcpdump/Makefile b/net/tcpdump/Makefile index ec6703b..0e76c58 100644 --- a/net/tcpdump/Makefile +++ b/net/tcpdump/Makefile @@ -8,15 +8,15 @@ include $(TOPDIR)/rules.mk PKG_NAME:=tcpdump -PKG_VERSION:=4.1.1 -PKG_RELEASE:=2 +PKG_VERSION:=4.2.1 +PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=http://www.tcpdump.org/release/ \ http://ftp.gwdg.de/pub/misc/tcpdump/ \ http://www.at.tcpdump.org/ \ http://www.br.tcpdump.org/ -PKG_MD5SUM:=d0dd58bbd6cd36795e05c6f1f74420b0 +PKG_MD5SUM:=c202878c6db054767b52651041b9e60e PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) diff --git a/net/tcpdump/patches/001-remove_pcap_debug.patch b/net/tcpdump/patches/001-remove_pcap_debug.patch index b67c434..14d1b84 100644 --- a/net/tcpdump/patches/001-remove_pcap_debug.patch +++ b/net/tcpdump/patches/001-remove_pcap_debug.patch @@ -1,6 +1,6 @@ --- a/tcpdump.c +++ b/tcpdump.c -@@ -901,20 +901,6 @@ main(int argc, char **argv) +@@ -982,20 +982,6 @@ main(int argc, char **argv) error(invalid data link type %s, gndo-ndo_dltname); break; diff --git a/net/tcpdump/patches/002-remove_static_libpcap_check.patch b/net/tcpdump/patches/002-remove_static_libpcap_check.patch index 0bffaab..8ab54aa 100644 --- a/net/tcpdump/patches/002-remove_static_libpcap_check.patch +++ b/net/tcpdump/patches/002-remove_static_libpcap_check.patch @@ -1,6 +1,6 @@ --- a/configure +++ b/configure -@@ -9440,28 +9440,6 @@ echo ${ECHO_T}Using $pfopen 6; } +@@ -7130,28 +7130,6 @@ echo ${ECHO_T}Using $pfopen 6; } LIBS=$LIBS $pfopen fi fi @@ -29,10 +29,15 @@ # # Look for pcap-config. # -@@ -9580,40 +9558,6 @@ fi - echo $as_me: error: see the INSTALL doc for more info 2;} -{ (exit 1); exit 1; }; } - fi +@@ -7335,45 +7313,6 @@ if test $ac_cv_lib_pcap_main = yes; then + libpcap=-lpcap + fi + +- if test $libpcap = FAIL ; then +- { { echo $as_me:$LINENO: error: see the INSTALL doc for more info 5 +-echo $as_me: error: see the INSTALL doc for more info 2;} +- { (exit 1); exit 1; }; } +- fi - { echo $as_me:$LINENO: checking for extraneous pcap header directories 5 -echo $ECHO_N checking for extraneous pcap header directories... $ECHO_C 6; } - if test \( ! -r /usr/local/include/pcap.h \) -a \ diff --git a/net/tcpdump/patches/004-fix_3g_iface.patch b/net/tcpdump/patches/004-fix_3g_iface.patch index cd10184..35d105f 100644 --- a/net/tcpdump/patches/004-fix_3g_iface.patch +++ b/net/tcpdump/patches/004-fix_3g_iface.patch @@ -8,7 +8,7 @@ #ifndef WIN32 #include sys/wait.h #include sys/resource.h -@@ -566,6 +567,7 @@ main(int argc, char **argv) +@@ -625,6 +626,7 @@ main(int argc, char **argv) #ifdef HAVE_PCAP_FINDALLDEVS pcap_if_t *devpointer; int devnum; @@ -16,7 +16,7 @@ #endif int status; #ifdef WIN32 -@@ -708,7 +710,8 @@ main(int argc, char **argv) +@@ -775,7 +777,8 @@ main(int argc, char **argv) * It can be useful on Windows, where more than * one interface can have the same name. */ diff --git a/net/tcpdump/patches/100-tcpdump_mini.patch b/net/tcpdump/patches/100-tcpdump_mini.patch index 6d4403e..d9537c4 100644 --- a/net/tcpdump/patches/100-tcpdump_mini.patch +++ b/net/tcpdump/patches/100-tcpdump_mini.patch @@ -1,58 +1,29 @@ --- a/Makefile.in +++ b/Makefile.in -@@ -68,34 +68,38 @@ RANLIB = @RANLIB@ +@@ -68,6 +68,22 @@ RANLIB = @RANLIB@ + @rm -f $@ + $(CC) $(FULL_CFLAGS) -c $(srcdir)/$*.c - CSRC =addrtoname.c af.c checksum.c cpack.c gmpls.c oui.c gmt2local.c ipproto.c \ - nlpid.c l2vpn.c machdep.c parsenfsfh.c \ -- print-802_11.c print-ap1394.c print-ah.c print-arcnet.c \ -- print-aodv.c print-arp.c print-ascii.c print-atalk.c print-atm.c \ -- print-beep.c print-bfd.c print-bgp.c print-bootp.c print-bt.c \ -- print-cdp.c print-cfm.c print-chdlc.c print-cip.c print-cnfp.c \ -- print-dccp.c print-decnet.c \ -- print-domain.c
Re: [OpenWrt-Devel] [PATCH] add new packages libhdhomerun and hdhomerun_config
Hi Artur, please update your patch with proper description. On Sat, Feb 11, 2012 at 06:19:59PM -0500, Artur Twarecki wrote: +define Package/libhdhomerun/description + Package/libhdhomerun/description Description update goes here, delete line above. +endef + +define Package/hdhomerun_config + SECTION:=utils + CATEGORY:=Utilities + TITLE:=HDHomeRun configuration utility + URL:=http://www.silicondust.com + DEPENDS:=+libpthread +librt +endef + +define Package/hdhomerun_config/description + Package/hdhomerun_config/description Description update goes here, delete line above. +endef + Then resend the patch. Regards, Luka ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] openwrt capable router with integrated adsl modem
Hi, On 11 Feb 2012, at 18:54, John Crispin wrote: buffalo wbmr is a nice choice, trunk works on t, wifi usb come up, has 4 gbit ports. john ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel I've got three of these up and running now on a three-way (well, two-way, it will be three tomorrow) bonded setup. I would thoroughly recommend these devices - they're great and pretty reasonably priced. I'm getting good DSL performance as well … one of them seems too good, although it did reboot (the whole thing, not just the DSL) and lower the rate a little, so I suspect there are still things to be sorted out with the driver … but it's been rock solid since, and the other one in current use has been stable for about three weeks now, no issues at all. Lee. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] 2012.02 Linaro 4.6
On Sat, Feb 11, 2012 at 01:34:58PM -0500, jonsm...@gmail.com wrote: Updating to Linaro 4.6 2012.02 has fixed those code generation bugs I was hitting. 2012.02 can also compile openssl for ARMv5 again (some Cortex changes had broken it). JFYI 2012.02 works fine for me on all my targets, thanks. -- Otto ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [OpenWrt-Users] Linksys WRT150N wireless supported in 10.03.1?
On 02/02/2012 4:52:09 PM, Hauke Mehrtens wrote: On 01/28/2012 06:55 AM, Aaron Z wrote: When I run killall -9 hostapd then wifi I get told: Configuration file: /var/run/hostapd-phy0.conf and Using interface wlan0 with hwaddr MACADDRESS and ssid 'OpenWrt'wifi is still rejecting connections. When I run killall -9 hostapd; /usr/sbin/hostapd -dd /var/run/hostapd-phy0.conf /tmp/hostapd.log it works right away. This behavior is strange it could be that debugging activates some needed code path, hostapd just works after the second start or that there are timing issues. Could you run hostapd just with -d and without -d and report what happens in these cases? Sorry for the delay. Its been busy around here. I ran killall -9 hostapd; /usr/sbin/hostapd -d /var/run/hostapd-phy0.conf /tmp/hostapd.log I was able to connect and go online. The log is attached as hostapd -d.txt (4 KB). I then rebooted the WAP and ran killall -9 hostapd; /usr/sbin/hostapd /var/run/hostapd-phy0.conf /tmp/hostapd.log I was able to connect and go online. The logfile was blank, so I didn't attach it. I tried connecting before running the commands and was rejected both times. Thanks Aaron Zrandom: Trying to read entropy from /dev/random Configuration file: /var/run/hostapd-phy0.conf nl80211: interface wlan0 in phy phy0 nl80211: Set mode ifindex 6 iftype 2 (STATION) nl80211: Failed to set interface 6 to mode 2: -16 (Device or resource busy) nl80211: Interface already in requested mode - ignore error netlink: Operstate: linkmode=1, operstate=5 nl80211: Using driver-based off-channel TX nl80211: Interface wlan0 is in bridge br-lan nl80211: Add own interface ifindex 5 nl80211: Add own interface ifindex 6 nl80211: Set mode ifindex 6 iftype 3 (AP) nl80211: Create interface iftype 6 (MONITOR) Failed to create interface mon.wlan0: -23 (Too many open files in system) Try to remove and re-create mon.wlan0 nl80211: Remove interface ifindex=7 nl80211: Create interface iftype 6 (MONITOR) nl80211: New interface mon.wlan0 created: ifindex=8 nl80211: Add own interface ifindex 8 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Regulatory information - country=00 nl80211: 2402-2472 @ 40 MHz nl80211: 2457-2482 @ 20 MHz nl80211: 2474-2494 @ 20 MHz nl80211: 5170-5250 @ 40 MHz nl80211: 5735-5835 @ 40 MHz nl80211: Added 802.11b mode based on 802.11g information Completing interface initialization Mode: IEEE 802.11g Channel: 11 Frequency: 2462 MHz nl80211: Set freq 2462 (ht_enabled=0 sec_channel_offset=0) RATE[0] rate=10 flags=0x1 RATE[1] rate=20 flags=0x1 RATE[2] rate=55 flags=0x1 RATE[3] rate=110 flags=0x1 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Flushing old station entries Deauthenticate all stations wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlan0 with hwaddr 00:88:88:88:00:2a and ssid 'OpenWrt' Using existing control interface directory. ctrl_iface bind(PF_UNIX) failed: Address already in use ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination Successfully replaced leftover ctrl_iface socket '/var/run/hostapd-phy0/wlan0' nl80211: Set beacon (beacon_set=0) wpa_driver_nl80211_set_operstate: operstate 0-1 (UP) netlink: Operstate: linkmode=-1, operstate=6 wlan0: Setup of interface done. RTM_NEWLINK: operstate=1 ifi_flags=0x11003 ([UP][LOWER_UP]) netlink: Operstate: linkmode=-1, operstate=6 RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 5 for bridge br-lan nl80211: Add own interface ifindex 5 RTM_NEWLINK: operstate=1 ifi_flags=0x11003 ([UP][LOWER_UP]) netlink: Operstate: linkmode=-1, operstate=6 RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 RTM_NEWLINK: operstate=1 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlan0 is up RTM_NEWLINK: operstate=1 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlan0 is up RTM_NEWLINK: operstate=1 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlan0 is up RTM_NEWLINK: operstate=1 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface wlan0 is up nl80211: Ignore event for foreign ifindex 7 nl80211: Ignore dellink event for foreign ifindex 7 RTM_NEWLINK: operstate=1 ifi_flags=0x1002 () nl80211: Ignore interface down event since interface mon.wlan0 is up RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0'
Re: [OpenWrt-Devel] 2012.02 Linaro 4.6
On Sun, Feb 12, 2012 at 7:09 PM, Otto Solares Cabrera so...@guug.org wrote: On Sat, Feb 11, 2012 at 01:34:58PM -0500, jonsm...@gmail.com wrote: Updating to Linaro 4.6 2012.02 has fixed those code generation bugs I was hitting. 2012.02 can also compile openssl for ARMv5 again (some Cortex changes had broken it). JFYI 2012.02 works fine for me on all my targets, thanks. -- Otto Does this imply that the toolchain will be changing at some point, soon? (otto, does your targets include ar71xx?) I have a long standing bug with QFQ that I perversely hope is toolchain related but aside from that... ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Dave Täht SKYPE: davetaht US Tel: 1-239-829-5608 FR Tel: 0638645374 http://www.bufferbloat.net ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel