Re: [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
Hello, sorry I did not explain myself correctly. $(eval $(call bcm63xxCfe,FAST2604 ,F@ST2604 ,fast2604 ,F@ST2604,... $(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,... If I use the the @ symbol in the 3rd argument (DEVICE_NAME), then the kernel does not boot any-more. Looking at all the other builds, the device_name uses the same name as the board_id. When I said board_id, I really meant the DEVICE_NAME. On 30/07/2015 20:34, Jonas Gorski wrote: Hi, On Tue, Jul 28, 2015 at 6:28 AM, Matt Goring matt.gor...@googlemail.com wrote: BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring matt.gor...@googlemail.com --- For future submissions, add a changelog here for all the changes between (re-)submissions. target/linux/brcm63xx/base-files/etc/diag.sh |3 + .../brcm63xx/base-files/etc/uci-defaults/01_leds |3 + .../base-files/etc/uci-defaults/02_network |1 + target/linux/brcm63xx/base-files/lib/brcm63xx.sh |3 + target/linux/brcm63xx/dts/fast2704n.dts| 84 target/linux/brcm63xx/image/Makefile |2 + .../patches-3.18/571-board_fast2704n.patch | 65 +++ .../brcm63xx/patches-4.1/571-board_fast2704n.patch | 65 +++ target/linux/brcm63xx/profiles/sagem.mk| 10 +++ 9 files changed, 236 insertions(+) create mode 100644 target/linux/brcm63xx/dts/fast2704n.dts create mode 100644 target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch create mode 100644 target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -623,6 +623,8 @@ $(eval $(call bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348)) $(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362)) # Sagem F@ST2604 $(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348)) +# Sagem F@ST2704N V1 / Plusnet F@ST2704N V1 +$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,6318,--pad 4)) I thought using F@ST2704N as the board name in the image does not work? Rest looks fine. Jonas ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
Hi, On Tue, Jul 28, 2015 at 6:28 AM, Matt Goring matt.gor...@googlemail.com wrote: BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring matt.gor...@googlemail.com --- For future submissions, add a changelog here for all the changes between (re-)submissions. target/linux/brcm63xx/base-files/etc/diag.sh |3 + .../brcm63xx/base-files/etc/uci-defaults/01_leds |3 + .../base-files/etc/uci-defaults/02_network |1 + target/linux/brcm63xx/base-files/lib/brcm63xx.sh |3 + target/linux/brcm63xx/dts/fast2704n.dts| 84 target/linux/brcm63xx/image/Makefile |2 + .../patches-3.18/571-board_fast2704n.patch | 65 +++ .../brcm63xx/patches-4.1/571-board_fast2704n.patch | 65 +++ target/linux/brcm63xx/profiles/sagem.mk| 10 +++ 9 files changed, 236 insertions(+) create mode 100644 target/linux/brcm63xx/dts/fast2704n.dts create mode 100644 target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch create mode 100644 target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -623,6 +623,8 @@ $(eval $(call bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348)) $(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362)) # Sagem F@ST2604 $(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348)) +# Sagem F@ST2704N V1 / Plusnet F@ST2704N V1 +$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,6318,--pad 4)) I thought using F@ST2704N as the board name in the image does not work? Rest looks fine. Jonas ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring matt.gor...@googlemail.com
---
target/linux/brcm63xx/base-files/etc/diag.sh |3 +
.../brcm63xx/base-files/etc/uci-defaults/01_leds |3 +
.../base-files/etc/uci-defaults/02_network |1 +
target/linux/brcm63xx/base-files/lib/brcm63xx.sh |3 +
target/linux/brcm63xx/dts/fast2704n.dts| 84
target/linux/brcm63xx/image/Makefile |2 +
.../patches-3.18/571-board_fast2704n.patch | 65 +++
.../brcm63xx/patches-4.1/571-board_fast2704n.patch | 65 +++
target/linux/brcm63xx/profiles/sagem.mk| 10 +++
9 files changed, 236 insertions(+)
create mode 100644 target/linux/brcm63xx/dts/fast2704n.dts
create mode 100644 target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch
create mode 100644 target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
b/target/linux/brcm63xx/base-files/etc/diag.sh
index 1b0d26d..7916ac2 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -70,6 +70,9 @@ set_state() {
fast2504n)
status_led=fast2504n:green:ok
;;
+ fast2704n)
+ status_led2=F@ST2704N:red:power
+ ;;
fast2704v2)
status_led=F@ST2704V2:green:power
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index b964bdb..bdb3dad 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -22,6 +22,9 @@ dgnd3700v1_dgnd3800b)
ucidef_set_led_usbdev usb1 USB1 DGND3700v1_3800B:green:usb-back
1-1
ucidef_set_led_usbdev usb2 USB2 DGND3700v1_3800B:green:usb-front
1-2
;;
+fast2704n)
+ ucidef_set_led_netdev wan WAN F@ST2704N:green:inet eth0.2
+ ;;
fast2704v2)
ucidef_set_led_usbdev usb USB F@ST2704V2:green:usb 1-1
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index e5880eb..2ff9e45 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -114,6 +114,7 @@ wap-5831n)
ucidef_add_switch_vlan eth0 2 4 5t
;;
+fast2704n |\
dgnd3700v1_dgnd3800b)
ucidef_set_interfaces_lan_wan eth0.1 eth0.2
ucidef_add_switch eth0 1 1
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 0eb9a75..92fa5f2 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -198,6 +198,9 @@ brcm63xx_dt_detect() {
Sagem F@ST2604)
board_name=fast2604
;;
+ Sagem F@ST2704N)
+ board_name=fast2704n
+ ;;
Sagem F@ST2704V2)
board_name=fast2704v2
;;
diff --git a/target/linux/brcm63xx/dts/fast2704n.dts
b/target/linux/brcm63xx/dts/fast2704n.dts
new file mode 100644
index 000..232d4d1
--- /dev/null
+++ b/target/linux/brcm63xx/dts/fast2704n.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include bcm6318.dtsi
+
+#include dt-bindings/input/input.h
+
+/ {
+ model = Sagem F@ST2704N;
+ compatible = sagem,f@st2704n, brcm,bcm6318;
+
+ gpio-keys-polled {
+ compatible = gpio-keys-polled;
+ #address-cells = 1;
+ #size-cells = 0;
+ poll-interval = 20;
+ debounce-interval = 60;
+
+ wlan {
+ label = wlan;
+ gpios = gpio0 1 0;
+ linux,code = KEY_WLAN;
+ };
+ wps {
+ label = wps;
+ gpios = gpio1 1 1;
+ linux,code = KEY_WPS_BUTTON;
+ };
+ reset {
+ label = reset;
+ gpios = gpio1 2 1;
+ linux,code = KEY_RESTART;
+ };
+ };
+
+ gpio-leds {
+ compatible = gpio-leds;
+
+ wps_green {
+ label = F@ST2704N:green:wps;
+ gpios = gpio0 2 1;
+ };
+ lan1_green {
+ label = F@ST2704N:green:lan1;
+ gpios = gpio0 4 1;
+ };
+ lan2_green {
+ label = F@ST2704N:green:lan2;
+ gpios = gpio0 5 1;
+ };
+ lan3_green {
+ label = F@ST2704N:green:lan3;
+ gpios = gpio0 6 1;
+ };
Re: [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
Hi,
I just noticed that you sent this to the wrong address
(openwrt-devel-request@ instead of openwrt-devel), thus it never made
it to the mailing list.
On 20.07.2015 10:40, Matt Goring wrote:
BCM6318: will also support Sagem 2704N (V1) and probably the
TP-Link-TD-W8960N (V5) because its the same hardware.
Signed-off-by: Matt Goring matt.goring at googlemail.com
Please shorten your commitlog lines to =72 chars.
Also please rebase onto the new image building code.
---
I have learnt and made the changes. about the USB comment, its comes in 2
favours. Either way they still have the PCB layout for the USB socket. I
hope that is OK?
Also tested with kernel 4.1.
Yeah, if this is the only difference that's fine.
This is a resubmit.
---
target/linux/brcm63xx/base-files/etc/diag.sh |3 +
.../brcm63xx/base-files/etc/uci-defaults/01_leds |3 +
.../base-files/etc/uci-defaults/02_network |7 ++
target/linux/brcm63xx/base-files/lib/brcm63xx.sh |3 +
target/linux/brcm63xx/dts/fast2704n.dts| 82
target/linux/brcm63xx/image/Makefile |2 +
.../patches-3.18/571-board_fast2704n.patch | 65
.../brcm63xx/patches-4.1/571-board_fast2704n.patch | 65
target/linux/brcm63xx/profiles/sagem.mk| 10 +++
9 files changed, 240 insertions(+)
create mode 100644 target/linux/brcm63xx/dts/fast2704n.dts
create mode 100644
target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch
create mode 100644
target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
b/target/linux/brcm63xx/base-files/etc/diag.sh
index 1b0d26d..7916ac2 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -70,6 +70,9 @@ set_state() {
fast2504n)
status_led=fast2504n:green:ok
;;
+ fast2704n)
+ status_led2=F@ST2704N:red:power
+ ;;
fast2704v2)
status_led=F@ST2704V2:green:power
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index b964bdb..bdb3dad 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -22,6 +22,9 @@ dgnd3700v1_dgnd3800b)
ucidef_set_led_usbdev usb1 USB1 DGND3700v1_3800B:green:usb-back
1-1
ucidef_set_led_usbdev usb2 USB2 DGND3700v1_3800B:green:usb-front
1-2
;;
+fast2704n)
+ ucidef_set_led_netdev wan WAN F@ST2704N:green:inet eth0.2
+ ;;
fast2704v2)
ucidef_set_led_usbdev usb USB F@ST2704V2:green:usb 1-1
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index e5880eb..d6bd43e 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -141,6 +141,13 @@ bcm963268bu_p300)
ucidef_add_switch_vlan switch0 1 0 3 4 5 6 7 8t
;;
+fast2704n)
+ ucidef_set_interfaces_lan_wan eth0.1 eth0.2
+ ucidef_add_switch eth0 1 1
+ ucidef_add_switch_vlan eth0 1 1 2 3 8t
+ ucidef_add_switch_vlan eth0 2 0 8t
That's the same setup as dgnd3700v1_dgnd3800b, so just add this board id to the
case instead of adding its own case.
+ ;;
+
*)
ucidef_set_interfaces_lan_wan eth1 eth0
;;
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 0eb9a75..92fa5f2 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -198,6 +198,9 @@ brcm63xx_dt_detect() {
Sagem F@ST2604)
board_name=fast2604
;;
+ Sagem F@ST2704N)
+ board_name=fast2704n
+ ;;
Sagem F@ST2704V2)
board_name=fast2704v2
;;
diff --git a/target/linux/brcm63xx/dts/fast2704n.dts
b/target/linux/brcm63xx/dts/fast2704n.dts
new file mode 100644
index 000..19e027b
--- /dev/null
+++ b/target/linux/brcm63xx/dts/fast2704n.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ bcm6318.dtsi
+
+/ {
+ model = Sagem F@ST2704N;
+ compatible = sagem,f@st2704n, brcm,bcm6318;
+
+ gpio-keys-polled {
+ compatible = gpio-keys-polled;
+ #address-cells = 1;
+ #size-cells = 0;
+ poll-interval = 20;
+ debounce-interval = 60;
+
+ rfkill {
+ label = rfkill;
+ gpios = gpio0 1 0;
+ linux,code = 0xee;
+ };
+ wps {
+ label = wps;
+
Re: [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
Hi,
On Mon, May 18, 2015 at 7:22 PM, Matt Goring matt.gor...@googlemail.com wrote:
Hello, this is my first submission, please excuse me if I have the wrong
mailing list, or missed a mailing rule.
No need for formalities, just write it like you would write a commit log.
This patch is to add support for the Plusnet 2704N Router (BCM6318), on the
current trunk.
This will most possibly add support for the Sagem 2704N (Ver 1) and the
TP-Link-TD-W8960N (Ver 5) due to the same hardware, but unconfirmed.
ADSL does not work (same with all Broadcom devices) and the Fibre (via
copper) is purposely not configured. Otherwise you will loose a Ethernet
port.
If it has a dedicated wan port (even if it is part of the switch), it
should be configured as a wan port by default IMHO.
The openwrt image will not work out-the-box for this Plusnet router. So I
will create a wiki page if this patch is accepted.
Put these after a tear-off line (--- ) so they don't become part of
the commit log.
Signed-off-by: Matt Goring matt.goring at googlemail.com
diff --git
a/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
b/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
You seem to be using git, please consider using git send-email to send
the patch inline.
index 6b6cfc0..a0ef569 100644
---
a/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++
b/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
This won't apply, you need to add a patch for the kernel, see
https://patchwork.ozlabs.org/patch/470305/ for an example.
@@ -2401,6 +2401,7 @@ static struct of_device_id const bcm963xx_boards_dt[]
= {
{ .compatible = brcm,bcm96318ref, .data = board_96318ref, },
{ .compatible = brcm,bcm96318ref_p300, .data =
board_96318ref_p300, },
{ .compatible = d-link,dsl-275xb-d, .data = board_dsl_2751b_d1, },
+ { .compatible = plusnet,f@st2704n, .data = board_96318ref, },
If the OEM is sagem, it should stay sagem. Also this device does not
seem to have any USB ports, so don't reuse a random board_foo file,
add a new one.
diff --git a/target/linux/brcm63xx/dts/fast2704n.dts
b/target/linux/brcm63xx/dts/fast2704n.dts
new file mode 100755
index 000..08bc58b
--- /dev/null
+++ b/target/linux/brcm63xx/dts/fast2704n.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/include/ bcm6318.dtsi
+
+/ {
+ model = Plusnet F@ST2704N;
+ compatible = plusnet,f@st2704n, brcm,bcm6318;
+
+ gpio-keys-polled {
+ compatible = gpio-keys-polled;
+ #address-cells = 1;
+ #size-cells = 0;
+ poll-interval = 20;
+ debounce-interval = 60;
+
+ reset {
+ label = reset;
+ gpios = gpio1 2 1;
+ linux,code = 0x198;
+ };
+ wps {
+ label = wps;
+ gpios = gpio1 1 1;
+ linux,code = 0x211;
+ };
Please order these by their gpio numbers.
+ };
+
+ /* Wireless LAN led is controlled independently */
Drop this comment, it doesn't really add much information.
+
+ gpio-leds {
+ compatible = gpio-leds;
+
+ wps_green {
+ label = F@ST2704N:green:wps;
+ gpios = gpio0 2 1;
+ };
+ inet_red {
+ label = F@ST2704N:red:inet;
+ gpios = gpio0 9 1;
+ };
+ inet_green {
+ label = F@ST2704N:green:inet;
+ gpios = gpio0 8 1;
+ };
+ dsl_green {
+ label = F@ST2704N:green:dsl;
+ gpios = gpio0 10 1;
+ };
+ lan4_green {
+ label = F@ST2704N:green:lan4;
+ gpios = gpio0 7 1;
+ };
+ lan3_green {
+ label = F@ST2704N:green:lan3;
+ gpios = gpio0 6 1;
+ };
+ lan2_green {
+ label = F@ST2704N:green:lan2;
+ gpios = gpio0 5 1;
+ };
+ lan1_green {
+ label = F@ST2704N:green:lan1;
+ gpios = gpio0 4 1;
+ };
+ power_red {
+ label = F@ST2704N:red:power;
+ gpios = gpio0 11 1;
+ };
Please order these by their gpio numbers.
+ };
+};
Regards
Jonas
[OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N
Hello, this is my first submission, please excuse me if I have the wrong
mailing list, or missed a mailing rule.
This patch is to add support for the Plusnet 2704N Router (BCM6318), on
the current trunk.
This will most possibly add support for the Sagem 2704N (Ver 1) and the
TP-Link-TD-W8960N (Ver 5) due to the same hardware, but unconfirmed.
ADSL does not work (same with all Broadcom devices) and the Fibre (via
copper) is purposely not configured. Otherwise you will loose a
Ethernet port.
The openwrt image will not work out-the-box for this Plusnet router. So
I will create a wiki page if this patch is accepted.
Signed-off-by: Matt Goring matt.goring at googlemail.com
diff --git
a/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
b/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 6b6cfc0..a0ef569 100644
---
a/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++
b/build_dir/target-mips_mips32_uClibc-0.9.33.2/linux-brcm63xx_generic/linux-3.18.11/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2401,6 +2401,7 @@ static struct of_device_id const bcm963xx_boards_dt[] = {
{ .compatible = brcm,bcm96318ref, .data = board_96318ref, },
{ .compatible = brcm,bcm96318ref_p300, .data = board_96318ref_p300,
},
{ .compatible = d-link,dsl-275xb-d, .data = board_dsl_2751b_d1, },
+ { .compatible = plusnet,f@st2704n, .data = board_96318ref, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
{ .compatible = adb,a4001n, .data = board_A4001N, },
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
b/target/linux/brcm63xx/base-files/etc/diag.sh
index 03d98b9..e97547a 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -69,6 +69,9 @@ set_state() {
fast2504n)
status_led=fast2504n:green:ok
;;
+ fast2704n)
+ status_led2=F@ST2704N:red:power
+ ;;
fast2704v2)
status_led=F@ST2704V2:green:power
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index 58404a1..c40a94f 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -22,6 +22,9 @@ dgnd3700v1_dgnd3800b)
ucidef_set_led_usbdev usb1 USB1 DGND3700v1_3800B:green:usb-back
1-1
ucidef_set_led_usbdev usb2 USB2 DGND3700v1_3800B:green:usb-front
1-2
;;
+fast2704n)
+ ucidef_set_led_netdev lan LAN F@ST2704N:green:lan1 eth0.1
+ ;;
fast2704v2)
ucidef_set_led_usbdev usb USB F@ST2704V2:green:usb 1-1
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 814e100..c31373a 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -91,6 +91,13 @@ bcm96368mvngr |\
dsl-274xb-f |\
dsl-275xb-d |\
fast2504n |\
+fast2704n)
+ ucidef_set_interfaces_lan_wan eth0.1 eth0.2
+ ucidef_add_switch eth0 1 1
+ ucidef_add_switch_vlan eth0 1 0 1 2 3 8t
+ ;;
+
fast2704v2 |\
p870hw-51a_v2 |\
vr-3025un |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 5cb390f..e09478e 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -186,6 +186,9 @@ brcm63xx_dt_detect() {
Pirelli Alice Gate AGPF-S0)
board_name=agpf-s0
;;
+ Plusnet F@ST2704N)
+ board_name=fast2704n
+ ;;
Sagem F@ST2404)
board_name=fast2404
;;
diff --git a/target/linux/brcm63xx/dts/fast2704n.dts
b/target/linux/brcm63xx/dts/fast2704n.dts
new file mode 100755
index 000..08bc58b
--- /dev/null
+++ b/target/linux/brcm63xx/dts/fast2704n.dts
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/include/ bcm6318.dtsi
+
+/ {
+ model = Plusnet F@ST2704N;
+ compatible = plusnet,f@st2704n, brcm,bcm6318;
+
+ gpio-keys-polled {
+ compatible = gpio-keys-polled;
+ #address-cells = 1;
+ #size-cells = 0;
+ poll-interval = 20;
+ debounce-interval = 60;
+
+ reset {
+ label = reset;
+ gpios = gpio1 2 1;
+ linux,code = 0x198;
+ };
+ wps {
+ label = wps;
+ gpios = gpio1 1 1;
+ linux,code = 0x211;
+ };
+ };
+
+ /*
