Re: [OpenWrt-Devel] [PATCH 00/10] lantiq - vgv7519 - multiple dts fix and make minipci card visible
On Tue, Oct 7, 2014 at 9:37 AM, John Crispin wrote: > can we have the same for BB please ? Sure, but later Eddi ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH 00/10] lantiq - vgv7519 - multiple dts fix and make minipci card visible
can we have the same for BB please ? On 06/10/2014 17:10, Eddi De Pieri wrote: > Hi maintainers, > > As requested I'm trying to send my patch to the mail list. > > Whith these patch I'm able to: > 1. get rt2800pci driver to probe the wifi board. > 2. leds connected to stp to work again (some changes into openwrt broken them) > 3. gphy leds working > > Regards > > > Eddi De Pieri (10): > lantiq: fix some alt function on pinctrl-xway > lantiq - vgv7519: fix gphy led configuration (this set correct alt > function to gpio and let peripherials on pci bus to comes up) > lantiq - vgv7519: we don't have dual minipci-card so we don't need > gnt1-req1 for pci handling > lantiq - vgv7519: we don't have pcie bus so we don't need the reset > device tree for this board > lantiq - vgv7519: remove exin definition copied from dev-board dts > lantiq - vgv7519: add pci-rst entry into dts > lantiq - vgv7519: fix open-drain configuration for stp > lantiq - vgv7519: remove spi_cs4, since the board use this line for > something else > lantiq - vgv7519: enable pci bus > lantiq - vgv7519: load rt5362 eeprom from bootloader param patition > > .../etc/hotplug.d/firmware/10-rt2x00-eeprom|2 +- > target/linux/lantiq/dts/VGV7519.dtsi | 48 > +++- > target/linux/lantiq/dts/VGV7519BRN.dts |6 +++ > target/linux/lantiq/dts/VGV7519NOR.dts |6 +++ > .../patches-3.14/0150-lantiq-pinctrl-xway.patch| 15 ++ > target/linux/lantiq/xrx200/config-3.14 |2 +- > 6 files changed, 55 insertions(+), 24 deletions(-) > create mode 100644 > target/linux/lantiq/patches-3.14/0150-lantiq-pinctrl-xway.patch > > -- > 1.7.10.4 > ___ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH 00/10] lantiq - vgv7519 - multiple dts fix and make minipci card visible
Hi maintainers, As requested I'm trying to send my patch to the mail list. Whith these patch I'm able to: 1. get rt2800pci driver to probe the wifi board. 2. leds connected to stp to work again (some changes into openwrt broken them) 3. gphy leds working Regards Eddi De Pieri (10): lantiq: fix some alt function on pinctrl-xway lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up) lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board lantiq - vgv7519: remove exin definition copied from dev-board dts lantiq - vgv7519: add pci-rst entry into dts lantiq - vgv7519: fix open-drain configuration for stp lantiq - vgv7519: remove spi_cs4, since the board use this line for something else lantiq - vgv7519: enable pci bus lantiq - vgv7519: load rt5362 eeprom from bootloader param patition .../etc/hotplug.d/firmware/10-rt2x00-eeprom|2 +- target/linux/lantiq/dts/VGV7519.dtsi | 48 +++- target/linux/lantiq/dts/VGV7519BRN.dts |6 +++ target/linux/lantiq/dts/VGV7519NOR.dts |6 +++ .../patches-3.14/0150-lantiq-pinctrl-xway.patch| 15 ++ target/linux/lantiq/xrx200/config-3.14 |2 +- 6 files changed, 55 insertions(+), 24 deletions(-) create mode 100644 target/linux/lantiq/patches-3.14/0150-lantiq-pinctrl-xway.patch -- 1.7.10.4 ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
