Re: [OpenWrt-Devel] OpenWrt-Devel] sunxi: BananaPi reboot problem
Hi Gerhard, On Sat, 19 Dec 2015, Gerhard Bertelsmann wrote: Hi, I have a problem with my BananaPi rebooting with actual trunk (r47935): [...] scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device data abort pc : [<7f67945c>] lr : [<7f6b1040>] reloc pc : [<4a01845c>]lr : [<4a050040>] sp : 7f238cd8 ip : 0001 fp : 0018 r10: 7f26f480 r9 : 7f240ee0 r8 : r7 : r6 : 7f26f538 r5 : 7f26f4d0 r4 : 0018 r3 : 7f26f3d0 r2 : 7f6b1140 r1 : 0021 r0 : 7f6b1143 Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28) ### The BananaPi loops, throw the exception and can't boot the image -> boots again. If I power cycle the BPi everything is fine and the BPi boots. Until I reboot -> it loops again. If I switch to GCC 4_8_LINARO everything is fine - strange. Does anybody know why the BPi behaves so strange ? Which BPi model is this, standard BananaPi or BananaPro? Thanks, Zoltan H ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] OpenWrt-Devel] sunxi: BananaPi reboot problem
Hi, I have a problem with my BananaPi rebooting with actual trunk (r47935): ### root@OpenWrt:/# [ 1618.564068] device eth0 left promiscuous mode [ 1618.568920] br-lan: port 1(eth0) entered disabled state [ 1618.581278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1619.820775] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 1622.831771] reboot: Restarting system U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28) DRAM: 1024 MiB CPU: 91200Hz, AXI/AHB/APB: 3/2/2 U-Boot 2015.07 (Dec 19 2015 - 13:25:28 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In:serial Out: serial Err: serial SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c5 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device data abort pc : [<7f67945c>] lr : [<7f6b1040>] reloc pc : [<4a01845c>]lr : [<4a050040>] sp : 7f238cd8 ip : 0001 fp : 0018 r10: 7f26f480 r9 : 7f240ee0 r8 : r7 : r6 : 7f26f538 r5 : 7f26f4d0 r4 : 0018 r3 : 7f26f3d0 r2 : 7f6b1140 r1 : 0021 r0 : 7f6b1143 Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28) ### The BananaPi loops, throw the exception and can't boot the image -> boots again. If I power cycle the BPi everything is fine and the BPi boots. Until I reboot -> it loops again. If I switch to GCC 4_8_LINARO everything is fine - strange. Does anybody know why the BPi behaves so strange ? Regards Gerd ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
