Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
On 2012-03-24 4:18 AM, Hanno Schupp wrote: Just compiled 31059 and the LAN ports of the rb450g work fine again as far as I can tell. Maybe 31054 fixed it? -Original Message- From: openwrt-devel-boun...@lists.openwrt.org [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Gregory Finch Sent: Saturday, 24 March 2012 11:04 a.m. To: OpenWrt Development List Subject: Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken On 2012-03-23 8:13 AM, Gregory Finch wrote: On 2012-03-22 8:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. I've run into the same problem with a Buffalo WZR-HP-G450H. I've gotten 30993 to work and am going to start rolling through the patches one by one to see where mine breaks today, but I have the same suspicion as you, that the problem lies in the group 30994-31011. I'll report back as soon as I find exactly where it breaks. -Greg Changeset 31028 - update linux 3.2 to 3.2.12 - this causes the problem. The switch is no longer works in my machine. swconfig can still see that a link is up or down, but that's it. Changeset 31026 may cause part of the issue too. Prior to 31026, I get the following in my logs on boot: kern.info kernel: [0.66] ag71xx_mdio: probed kern.info kernel: [0.66] eth0: Atheros AG71xx at 0xb900, irq 4 kern.info kernel: [1.24] eth0: AR8316 switch driver attached. kern.info kernel: [1.24] ar8316: Using port 4 as switch port kern.info kernel: [1.34] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] from 31026, I no longer get that information in the logs. I haven't had a chance to stress test it yet, so I'm not sure if there are any implications with the change. -Greg Had a chance to build and install 31076. It seems that my problems have been fixed, although I haven't gove through to see if 31054 was the exact fix, or if my dropping and re-checkingout trunk fixed my problems. Either way, I have a happy router again. Thank you, -Greg signature.asc Description: OpenPGP digital signature ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
Just compiled 31059 and the LAN ports of the rb450g work fine again as far as I can tell. Maybe 31054 fixed it? -Original Message- From: openwrt-devel-boun...@lists.openwrt.org [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Gregory Finch Sent: Saturday, 24 March 2012 11:04 a.m. To: OpenWrt Development List Subject: Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken On 2012-03-23 8:13 AM, Gregory Finch wrote: On 2012-03-22 8:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. I've run into the same problem with a Buffalo WZR-HP-G450H. I've gotten 30993 to work and am going to start rolling through the patches one by one to see where mine breaks today, but I have the same suspicion as you, that the problem lies in the group 30994-31011. I'll report back as soon as I find exactly where it breaks. -Greg Changeset 31028 - update linux 3.2 to 3.2.12 - this causes the problem. The switch is no longer works in my machine. swconfig can still see that a link is up or down, but that's it. Changeset 31026 may cause part of the issue too. Prior to 31026, I get the following in my logs on boot: kern.info kernel: [0.66] ag71xx_mdio: probed kern.info kernel: [0.66] eth0: Atheros AG71xx at 0xb900, irq 4 kern.info kernel: [1.24] eth0: AR8316 switch driver attached. kern.info kernel: [1.24] ar8316: Using port 4 as switch port kern.info kernel: [1.34] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] from 31026, I no longer get that information in the logs. I haven't had a chance to stress test it yet, so I'm not sure if there are any implications with the change. -Greg ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
On 22/03/12 11:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. Woah woah back the hell up. You got openwrt to boot in any shape on a rb450g? any chance that image might boot a rb435g? ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
Sure, 450G is supported for a long time. No idea about the 435g, give if a try and let us know... On 23/03/2012, at 7:38 PM, Weedy weedy2...@gmail.com wrote: On 22/03/12 11:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. Woah woah back the hell up. You got openwrt to boot in any shape on a rb450g? any chance that image might boot a rb435g? ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
On 23/03/12 03:06 AM, Hanno Schupp wrote: Sure, 450G is supported for a long time. No idea about the 435g, give if a try and let us know... I failed horribly to get a image to boot. I spent a week going over the twenty-seven thousand line kernel patch microtik sent me and had no luck. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
Weedy - Yeah, the trick to getting it to load is using the -initramdisk image. I wasted hours with errors about flash block sizes or something like that and it booted first time when I used the ramdisk image. After you get it booted with that ramdisk image you can copy a real image over to the flash with wget2nand. I'm just assuming that you should be able to use the same images since the specs for the 435g look pretty darn close to the 450g. -Rob On Fri, Mar 23, 2012 at 3:53 AM, Weedy weedy2...@gmail.com wrote: On 23/03/12 03:06 AM, Hanno Schupp wrote: Sure, 450G is supported for a long time. No idea about the 435g, give if a try and let us know... I failed horribly to get a image to boot. I spent a week going over the twenty-seven thousand line kernel patch microtik sent me and had no luck. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Rob McKrill Voice Engineering Fidelity Voice and Data (216) 245-4109 www.fidelityvoice.com 2008, 2009, 2010 2011 Inductee to the prestigious Weatherhead 100 ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
On 2012-03-22 8:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. I've run into the same problem with a Buffalo WZR-HP-G450H. I've gotten 30993 to work and am going to start rolling through the patches one by one to see where mine breaks today, but I have the same suspicion as you, that the problem lies in the group 30994-31011. I'll report back as soon as I find exactly where it breaks. -Greg signature.asc Description: OpenPGP digital signature ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Mikrotik Routerboard 450G - access to LAN ports broken
On 2012-03-23 8:13 AM, Gregory Finch wrote: On 2012-03-22 8:14 PM, Hanno Schupp wrote: My last good image is on the Mikrotik rb450g is 30857. 31037 no longer works. I have not tested in between. I suspect this is a regression from the changes introduced somewhere in 30994-31011, which extended the 8216 switch chip code (which also supports the 8316 used on the rb450g) to support 8327. I've run into the same problem with a Buffalo WZR-HP-G450H. I've gotten 30993 to work and am going to start rolling through the patches one by one to see where mine breaks today, but I have the same suspicion as you, that the problem lies in the group 30994-31011. I'll report back as soon as I find exactly where it breaks. -Greg Changeset 31028 - update linux 3.2 to 3.2.12 - this causes the problem. The switch is no longer works in my machine. swconfig can still see that a link is up or down, but that's it. Changeset 31026 may cause part of the issue too. Prior to 31026, I get the following in my logs on boot: kern.info kernel: [0.66] ag71xx_mdio: probed kern.info kernel: [0.66] eth0: Atheros AG71xx at 0xb900, irq 4 kern.info kernel: [1.24] eth0: AR8316 switch driver attached. kern.info kernel: [1.24] ar8316: Using port 4 as switch port kern.info kernel: [1.34] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] from 31026, I no longer get that information in the logs. I haven't had a chance to stress test it yet, so I'm not sure if there are any implications with the change. -Greg signature.asc Description: OpenPGP digital signature ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
