On 10/29/2013 01:31 PM, Gui Iribarren wrote:
I'm trying to get a macvlan interface brought up by netifd
on last week openwrt trunk
BARRIER BREAKER (Bleeding Edge, r38505)
with netifd - 2013-10-19-566af724dad393fa127e07469dcc9ade62bd3a75
and i'm probably missing something very silly, but i'm not getting any
reaction or error whatsoever. The whole network.lm_anygw=device is ignored
root@48cf6b:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan.type=bridge
network.lan.proto=static
network.lan.netmask=255.255.255.0
network.lan.ip6addr=2A00:1508:1:F820:0:0:48:CF6B/64
network.lan.ipaddr=192.168.11.107
network.lan.ifname=eth0
network.wan=interface
network.wan.proto=dhcp
network.wan6=interface
network.wan6.ifname=@wan
network.wan6.proto=dhcpv6
network.@switch[0]=switch
network.@switch[0].name=switch0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=switch0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 4
network.lm_anygw=device
network.lm_anygw.type=macvlan
network.lm_anygw.name=anygw
network.lm_anygw.ifname=eth1
network.lm_anygw.macaddr=aa:aa:aa:40:28:b5
root@48cf6b:~# ubus list
log
network
network.device
network.interface
network.interface.lan
network.interface.loopback
network.interface.wan
network.interface.wan6
service
system
ah! i'm getting *somewhere*, although not sure where
root@48cf6b:~# ubus call network.device status '{ name: anygw }'
{
external: false,
present: true,
type: MAC VLAN,
up: false,
parent: eth1,
statistics: {
}
}
so it seems it is actually recognizing the config section, but not
bringing the device up for some reason?
right, i was missing a 'config interface' that would actually reference
the new device
i.e.
network.if_anygw=interface
network.if_anygw.ifname=anygw
network.if_anygw.proto=static
network.if_anygw.ip6addr=2A00:1508:1:F820:0:0::1/64
now..
root@48cf6b:~# ip a s anygw
8: anygw@eth1: NO-CARRIER,BROADCAST,MULTICAST,UP mtu 1500 qdisc
noqueue state LOWERLAYERDOWN group default
link/ether aa:aa:aa:40:28:b5 brd ff:ff:ff:ff:ff:ff
inet6 2a00:1508:1:f820::1/64 scope global tentative
valid_lft forever preferred_lft forever
nice!
thanks a lot jow/nbd for the code, and the help!
cheers,
gui
i even tried the following, with same result (nothing)
network.wan.ifname=eth1
network.lm_anygw.ifname=@wan
no new / error messages in logread, nothing.
daemon.notice netifd: Interface 'lan' is now up
daemon.notice netifd: Interface 'loopback' is now up
and i couldn't find how to turn netifd into something more verbose...
any further help will be greatly appreciated, and i promise updating the
wiki in return :)
cheers!
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
