[packer] Re: Deploying a vm with packer with a static IP
Can you please help me understand why this is happening? I have been trying for a while now, and I am still getting the same results On Friday, September 16, 2016 at 10:24:44 AM UTC-7, Rjaydee wrote: > > I am trying to deploy and set a vm using packer and a kickstart file. This > packer code: > > { > "builders": [ > { > "type": "vmware-iso", > "format": "ovf", > "vm_name": "PACKERTEST2", > "iso_url": > "http://ftp.riken.jp/Linux/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1511.iso;, > "iso_checksum": > "907e5755f824c5848b9c8efbb484f3cd945e93faa024bad6ba875226f9683b16", > "iso_checksum_type": "sha256", > "disk_size": "10240", > "disk_type_id": "thin", > "remote_host": "host", > "remote_datastore": "ds", > "remote_username": "root", > "remote_password": "pw", > "remote_type": "esx5", > "ssh_username": "root", > "guest_os_type": "centos-64", > "ssh_password": "ps", > "ssh_port": 22, > "ssh_wait_timeout": "800s", > "shutdown_command": "shutdown -h now", > "headless": false, > "floppy_files": [ > "kickstart/ks.cfg" > ], > "boot_command": " linux inst.text inst.ks=hd:fd0:/ks.cfg > ", > "boot_wait": "20s", > "keep_registered": "true", > "vmx_data": { > "config.version": 8, > "virtualHW.version": 8, > "ethernet0.virtualDev": "vmxnet3", > "ethernet0.networkName": "VM Network", > "ethernet0.addressType": "generated", > "ethernet0.present": "TRUE", > "ethernet1.virtualDev": "vmxnet3", > "ethernet1.networkName": "VLAN100", > "ethernet1.addressType": "generated", > "ethernet1.present": "TRUE", > "ethernet0.pciSlotNumber": "9", > "ethernet1.pciSlotNumber": "224", > "memsize": "2048", > "numvcpus": "2", > "cpuid.coresPerSocket": "1", > "RemoteDisplay.vnc.enabled": "TRUE", > "RemoteDisplay.vnc.port": "5900" > > } > } > ] > } > > This is the ks.cfg file I have: > > > # SELinux configuration > selinux --enforcing > > # Installation logging level > logging --level=info > > > # Run the Setup Agent on first boot > firstboot --enable > > # Reboot after installation > reboot > > # System timezone > timezone --isUtc America/Los_Angeles > # Network information > network --activate --bootproto=static --device=eth0 --gateway=8.1.132.254 > --netmask=255.255.255.0 --ip= 8.1.132.18 —hostname=myhost.com > > # System bootloader configuration > bootloader --append="crashkernel=auto rhgb quiet" --location=mbr > --driveorder="sda" > > # Partition clearing information > zerombr > clearpart --all --drives=sda > > # Disk partitioning information > part /boot --fstype="ext4" --size=500 > part pv.008002 --grow --size=1 > volgroup vg_centos --pesize=4096 pv.008002 > logvol / --fstype=ext4 --name=lv_root --vgname=vg_centos --grow --size=1024 > --maxsize=51200 > logvol swap --name=lv_swap --vgname=vg_centos --grow --size=3072 > --maxsize=3072 > > %packages --nobase > @^minimal > @core > kexec-tools > > %end > > I however keep getting this error when I run it. > > => vmware-iso: Waiting for SSH to become available... > ==> vmware-iso: Timeout waiting for SSH. > ==> vmware-iso: Stopping virtual machine... > ==> vmware-iso: Destroying virtual machine... > Build 'vmware-iso' errored: Timeout waiting for SSH. > Why do I getting this error message? Is it because my code in the ks.cfg file > to connect to a static ip address correct? Any thought would be greatly > appreciated. > > -- This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list. GitHub Issues: https://github.com/mitchellh/packer/issues IRC: #packer-tool on Freenode --- You received this message because you are subscribed to the Google Groups "Packer" group. To unsubscribe from this group and stop receiving emails from it, send an email to packer-tool+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/packer-tool/0ea9dbeb-5baf-4d91-a99d-938c0a550333%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [packer] Re: Deploying a vm with packer with a static IP
After doing reseach, and tests. The error seems to be at this part of the ks.cfg file. #Network Information network --bootproto=static --device=eno16780032 --gateway=8.1.140.1 --ip=8.1.142.187 --nameserver=8.1.44.254,8.1.32.254 --netmask=255.255.252.0 --noipv6 --activate --hostname=myhost.com I manually created the vm myself and used a static ip address to do it, and I was then able to ssh into it. So I am very sure the above credentials work. When I get anaconda-ks.cfg file for that, and use it as a template to create the vm using packer, it doesn't seem to work. These are the two sysconfig files for manual and packer installations. Why is the kickstart file not working? Please help >> -- This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list. GitHub Issues: https://github.com/mitchellh/packer/issues IRC: #packer-tool on Freenode --- You received this message because you are subscribed to the Google Groups "Packer" group. To unsubscribe from this group and stop receiving emails from it, send an email to packer-tool+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/packer-tool/bcbee819-d9e6-414a-9d55-2a60145fe8a0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. TYPE=Ethernet BOOTPROTO=none DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no IPV6_AUTOCONG=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eno16780032 DEVICE=eno16780032 ONBOOT=yes IPADDR=8.1.142.187 PREFIX=22 GATEWAY=8.1.140.1 DNS1=8.1.44.254 DNS2=8.1.32.254 DOMAIN=myhost.comTYPE=Ethernet BOOTPROTO=dhcp PEERDNS=yes PEERROUTES=yes DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONG=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eno160 DEVICE=eno160 ONBOOT=no
Re: [packer] Re: Deploying a vm with packer with a static IP
Hello, I will suggest slow down a bit. You should automate something that you know it words and ideally you have done it properly. We know packer works so is not a packer issues, is "how I do xxx with packer", but the issue in reality is "how do i xxx" My suggestion will be do this first without packer, and then give a shot to packer, you will learn about the process and you will able to move faster. 1. Manual install Create a new VM on vmware, put the iso on it, do a instalattion, end with a VM you can login with user and password you want. 2. First try with kickstart Take /root/anaconda-ks.cfg file as example for an installer, review commented section around disk partition, replace password with a non-scripted one, comment out the current one. If there is a line that say shutdown in the ks, replace it with reboot. put this kickstart in some webserver in your network Create a new VM map the iso edit the boot like to add at the end ks=http:// //ks.cfg wait to see if your vm install 100% un-attended, and its waiting for lognin login with user/pass shutdown the VM 3. First packer VM use this kickstart as IS, no extra changes in packer, get a basic VM that does nothing other than install. When you have a working paker installation move 1 change at the time. Alvaro. -- This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list. GitHub Issues: https://github.com/mitchellh/packer/issues IRC: #packer-tool on Freenode --- You received this message because you are subscribed to the Google Groups "Packer" group. To unsubscribe from this group and stop receiving emails from it, send an email to packer-tool+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/packer-tool/CAHqq0ez_sK%3DaFw2tJUTAnU%3DyaxPM2rTJTLUaexqa4NGSgTNi6Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [packer] Re: Deploying a vm with packer with a static IP
Ok then you need to get a console and login and troubleshoot your network. Most likely your network is not properly setup. Is it necessary to have two different nic's? On Saturday, September 17, 2016 at 7:20:02 AM UTC+2, Rjaydee wrote: > > So I did what you suggested. You can see attached files. I however keep > getting the ssh timeout error. This from the packer log: > > > 2016/09/16 21:48:44 packer: 2016/09/16 21:48:44 opening new ssh session > > 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 starting remote command: > esxcli --formatter csv network vm list > > 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 remote command exited with > '0': esxcli --formatter csv network vm list > > 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 opening new ssh session > > 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 starting remote command: > esxcli --formatter csv network vm port list -w 28501321 > > 2016/09/16 21:48:46 packer: 2016/09/16 21:48:46 remote command exited with > '0': esxcli --formatter csv network vm port list -w 28501321 > > 2016/09/16 21:48:46 packer: 2016/09/16 21:48:46 [DEBUG] Error getting SSH > address: VM network port found, but no IP address > > I just configured a centos vm manually using the same ipaddress, dns, > gateway etc.. and it worked. Any thoughts on why this is not working? > Thanks > > On Friday, September 16, 2016 at 5:15:28 PM UTC-7, Rickard von Essen wrote: >> >> 1) rootpw "testing" in your ks.cfg must match your "ssh_password": >> “saint” in packertest.json . >> 2) You kickstart file must enable root ssh login in /etc/ssh/sshd_config >> by setting PermitRootLogin yes >> The simplest way to do this is probably adding this to your ks.cfg before >> %end >> >> %post >> sed -i 's/.*PermitRootLogin .*/PermitRootLogin yes/' /etc/ssh/sshd_config >> >> >> On 17 September 2016 at 01:49, Rjaydeewrote: >> >>> Hello Richard, I am sorry if this question seems dumb, but I just >>> started learning/uisng a packer a couple of days ago. How do I modify the >>> etc/sshd_config file you're talking about. What is it supposed to contain? >>> >>> >>> On Friday, September 16, 2016 at 4:00:33 PM UTC-7, Rickard von Essen >>> wrote: I don't see that you modify /etc/sshd_config in your kickstart file to allow root login neither that you set roots password. If that doesn't help run with PACKER_LOG=1 packer build template.json and gist the output and link here. Or if you have a console access (VMRC/vSphere/ESXi Embedded Host Client) login there and check if the network is up in the VM, you can access the outside world and check if you get any messages in the logs about auth fail etc. On Friday, September 16, 2016 at 7:24:44 PM UTC+2, Rjaydee wrote: > > I am trying to deploy and set a vm using packer and a kickstart file. > This packer code: > > { > "builders": [ > { > "type": "vmware-iso", > "format": "ovf", > "vm_name": "PACKERTEST2", > "iso_url": > "http://ftp.riken.jp/Linux/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1511.iso;, > "iso_checksum": > "907e5755f824c5848b9c8efbb484f3cd945e93faa024bad6ba875226f9683b16", > "iso_checksum_type": "sha256", > "disk_size": "10240", > "disk_type_id": "thin", > "remote_host": "host", > "remote_datastore": "ds", > "remote_username": "root", > "remote_password": "pw", > "remote_type": "esx5", > "ssh_username": "root", > "guest_os_type": "centos-64", > "ssh_password": "ps", > "ssh_port": 22, > "ssh_wait_timeout": "800s", > "shutdown_command": "shutdown -h now", > "headless": false, > "floppy_files": [ > "kickstart/ks.cfg" > ], > "boot_command": " linux inst.text inst.ks=hd:fd0:/ks.cfg > ", > "boot_wait": "20s", > "keep_registered": "true", > "vmx_data": { > "config.version": 8, > "virtualHW.version": 8, > "ethernet0.virtualDev": "vmxnet3", > "ethernet0.networkName": "VM Network", > "ethernet0.addressType": "generated", > "ethernet0.present": "TRUE", > "ethernet1.virtualDev": "vmxnet3", > "ethernet1.networkName": "VLAN100", > "ethernet1.addressType": "generated", > "ethernet1.present": "TRUE", > "ethernet0.pciSlotNumber": "9", > "ethernet1.pciSlotNumber": "224", > "memsize": "2048", > "numvcpus": "2",
Re: [packer] Re: Deploying a vm with packer with a static IP
Hello Alvaro, hope you're having a great day. Can you please take a look at my file, and tell me what's wrong? Thanks. On Friday, September 16, 2016 at 4:33:57 PM UTC-7, Alvaro Miranda Aguilera wrote: > > Hello, > > on top of the password not being set on the kickstart, please check the > name of the interface. > > your code is enabling eth0, but in centos7 the names will be different. > ens32 or ens33 usually, check bento as reference. > > this: > https://github.com/chef/bento/blob/master/http/centos-7.2/ks.cfg#L5-L6 > > > > On Sat, Sep 17, 2016 at 1:00 AM, Rickard von Essen> wrote: > >> I don't see that you modify /etc/sshd_config in your kickstart file to >> allow root login neither that you set roots password. >> >> If that doesn't help run with PACKER_LOG=1 packer build template.json and >> gist the output and link here. Or if you have a console access >> (VMRC/vSphere/ESXi Embedded Host Client) login there and check if the >> network is up in the VM, you can access the outside world and check if you >> get any messages in the logs about auth fail etc. >> >> >> On Friday, September 16, 2016 at 7:24:44 PM UTC+2, Rjaydee wrote: >>> >>> I am trying to deploy and set a vm using packer and a kickstart file. >>> This packer code: >>> >>> { >>> "builders": [ >>> { >>> "type": "vmware-iso", >>> "format": "ovf", >>> "vm_name": "PACKERTEST2", >>> "iso_url": >>> "http://ftp.riken.jp/Linux/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1511.iso;, >>> "iso_checksum": >>> "907e5755f824c5848b9c8efbb484f3cd945e93faa024bad6ba875226f9683b16", >>> "iso_checksum_type": "sha256", >>> "disk_size": "10240", >>> "disk_type_id": "thin", >>> "remote_host": "host", >>> "remote_datastore": "ds", >>> "remote_username": "root", >>> "remote_password": "pw", >>> "remote_type": "esx5", >>> "ssh_username": "root", >>> "guest_os_type": "centos-64", >>> "ssh_password": "ps", >>> "ssh_port": 22, >>> "ssh_wait_timeout": "800s", >>> "shutdown_command": "shutdown -h now", >>> "headless": false, >>> "floppy_files": [ >>> "kickstart/ks.cfg" >>> ], >>> "boot_command": " linux inst.text inst.ks=hd:fd0:/ks.cfg >>> ", >>> "boot_wait": "20s", >>> "keep_registered": "true", >>> "vmx_data": { >>> "config.version": 8, >>> "virtualHW.version": 8, >>> "ethernet0.virtualDev": "vmxnet3", >>> "ethernet0.networkName": "VM Network", >>> "ethernet0.addressType": "generated", >>> "ethernet0.present": "TRUE", >>> "ethernet1.virtualDev": "vmxnet3", >>> "ethernet1.networkName": "VLAN100", >>> "ethernet1.addressType": "generated", >>> "ethernet1.present": "TRUE", >>> "ethernet0.pciSlotNumber": "9", >>> "ethernet1.pciSlotNumber": "224", >>> "memsize": "2048", >>> "numvcpus": "2", >>> "cpuid.coresPerSocket": "1", >>> "RemoteDisplay.vnc.enabled": "TRUE", >>> "RemoteDisplay.vnc.port": "5900" >>> >>> } >>> } >>> ] >>> } >>> >>> This is the ks.cfg file I have: >>> >>> >>> # SELinux configuration >>> selinux --enforcing >>> >>> # Installation logging level >>> logging --level=info >>> >>> >>> # Run the Setup Agent on first boot >>> firstboot --enable >>> >>> # Reboot after installation >>> reboot >>> >>> # System timezone >>> timezone --isUtc America/Los_Angeles >>> # Network information >>> network --activate --bootproto=static --device=eth0 --gateway=8.1.132.254 >>> --netmask=255.255.255.0 --ip= 8.1.132.18 —hostname=myhost.com >>> >>> # System bootloader configuration >>> bootloader --append="crashkernel=auto rhgb quiet" --location=mbr >>> --driveorder="sda" >>> >>> # Partition clearing information >>> zerombr >>> clearpart --all --drives=sda >>> >>> # Disk partitioning information >>> part /boot --fstype="ext4" --size=500 >>> part pv.008002 --grow --size=1 >>> volgroup vg_centos --pesize=4096 pv.008002 >>> logvol / --fstype=ext4 --name=lv_root --vgname=vg_centos --grow --size=1024 >>> --maxsize=51200 >>> logvol swap --name=lv_swap --vgname=vg_centos --grow --size=3072 >>> --maxsize=3072 >>> >>> %packages --nobase >>> @^minimal >>> @core >>> kexec-tools >>> >>> %end >>> >>> I however keep getting this error when I run it. >>> >>> => vmware-iso: Waiting for SSH to become available... >>> ==> vmware-iso: Timeout waiting for SSH. >>> ==> vmware-iso: Stopping virtual machine... >>> ==> vmware-iso: Destroying virtual machine... >>> Build 'vmware-iso' errored: Timeout waiting for SSH. >>> Why do
Re: [packer] Re: Deploying a vm with packer with a static IP
So I did what you suggested. You can see attached files. I however keep getting the ssh timeout error. This from the packer log: 2016/09/16 21:48:44 packer: 2016/09/16 21:48:44 opening new ssh session 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 starting remote command: esxcli --formatter csv network vm list 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 remote command exited with '0': esxcli --formatter csv network vm list 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 opening new ssh session 2016/09/16 21:48:45 packer: 2016/09/16 21:48:45 starting remote command: esxcli --formatter csv network vm port list -w 28501321 2016/09/16 21:48:46 packer: 2016/09/16 21:48:46 remote command exited with '0': esxcli --formatter csv network vm port list -w 28501321 2016/09/16 21:48:46 packer: 2016/09/16 21:48:46 [DEBUG] Error getting SSH address: VM network port found, but no IP address I just configured a centos vm manually using the same ipaddress, dns, gateway etc.. and it worked. Any thoughts on why this is not working? Thanks On Friday, September 16, 2016 at 5:15:28 PM UTC-7, Rickard von Essen wrote: > > 1) rootpw "testing" in your ks.cfg must match your "ssh_password": “saint” > in packertest.json . > 2) You kickstart file must enable root ssh login in /etc/ssh/sshd_config > by setting PermitRootLogin yes > The simplest way to do this is probably adding this to your ks.cfg before > %end > > %post > sed -i 's/.*PermitRootLogin .*/PermitRootLogin yes/' /etc/ssh/sshd_config > > > On 17 September 2016 at 01:49, Rjaydee> wrote: > >> Hello Richard, I am sorry if this question seems dumb, but I just started >> learning/uisng a packer a couple of days ago. How do I modify the >> etc/sshd_config file you're talking about. What is it supposed to contain? >> >> >> On Friday, September 16, 2016 at 4:00:33 PM UTC-7, Rickard von Essen >> wrote: >>> >>> I don't see that you modify /etc/sshd_config in your kickstart file to >>> allow root login neither that you set roots password. >>> >>> If that doesn't help run with PACKER_LOG=1 packer build template.json >>> and gist the output and link here. Or if you have a console access >>> (VMRC/vSphere/ESXi Embedded Host Client) login there and check if the >>> network is up in the VM, you can access the outside world and check if you >>> get any messages in the logs about auth fail etc. >>> >>> On Friday, September 16, 2016 at 7:24:44 PM UTC+2, Rjaydee wrote: I am trying to deploy and set a vm using packer and a kickstart file. This packer code: { "builders": [ { "type": "vmware-iso", "format": "ovf", "vm_name": "PACKERTEST2", "iso_url": "http://ftp.riken.jp/Linux/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1511.iso;, "iso_checksum": "907e5755f824c5848b9c8efbb484f3cd945e93faa024bad6ba875226f9683b16", "iso_checksum_type": "sha256", "disk_size": "10240", "disk_type_id": "thin", "remote_host": "host", "remote_datastore": "ds", "remote_username": "root", "remote_password": "pw", "remote_type": "esx5", "ssh_username": "root", "guest_os_type": "centos-64", "ssh_password": "ps", "ssh_port": 22, "ssh_wait_timeout": "800s", "shutdown_command": "shutdown -h now", "headless": false, "floppy_files": [ "kickstart/ks.cfg" ], "boot_command": " linux inst.text inst.ks=hd:fd0:/ks.cfg ", "boot_wait": "20s", "keep_registered": "true", "vmx_data": { "config.version": 8, "virtualHW.version": 8, "ethernet0.virtualDev": "vmxnet3", "ethernet0.networkName": "VM Network", "ethernet0.addressType": "generated", "ethernet0.present": "TRUE", "ethernet1.virtualDev": "vmxnet3", "ethernet1.networkName": "VLAN100", "ethernet1.addressType": "generated", "ethernet1.present": "TRUE", "ethernet0.pciSlotNumber": "9", "ethernet1.pciSlotNumber": "224", "memsize": "2048", "numvcpus": "2", "cpuid.coresPerSocket": "1", "RemoteDisplay.vnc.enabled": "TRUE", "RemoteDisplay.vnc.port": "5900" } } ] } This is the ks.cfg file I have: # SELinux configuration selinux --enforcing # Installation logging level
Re: [packer] Re: Deploying a vm with packer with a static IP
Hello Alvaro. Thanks for your reply. eno16780032. this is the device I am using. How do I fix it in my code. I am sorry if this questions seem pretty obvious. i am very new to all of this. i have also attached my current code now. Thanks. On Friday, September 16, 2016 at 4:33:57 PM UTC-7, Alvaro Miranda Aguilera wrote: > > Hello, > > on top of the password not being set on the kickstart, please check the > name of the interface. > > your code is enabling eth0, but in centos7 the names will be different. > ens32 or ens33 usually, check bento as reference. > > this: > https://github.com/chef/bento/blob/master/http/centos-7.2/ks.cfg#L5-L6 > > > > On Sat, Sep 17, 2016 at 1:00 AM, Rickard von Essen> wrote: > >> I don't see that you modify /etc/sshd_config in your kickstart file to >> allow root login neither that you set roots password. >> >> If that doesn't help run with PACKER_LOG=1 packer build template.json and >> gist the output and link here. Or if you have a console access >> (VMRC/vSphere/ESXi Embedded Host Client) login there and check if the >> network is up in the VM, you can access the outside world and check if you >> get any messages in the logs about auth fail etc. >> >> >> On Friday, September 16, 2016 at 7:24:44 PM UTC+2, Rjaydee wrote: >>> >>> I am trying to deploy and set a vm using packer and a kickstart file. >>> This packer code: >>> >>> { >>> "builders": [ >>> { >>> "type": "vmware-iso", >>> "format": "ovf", >>> "vm_name": "PACKERTEST2", >>> "iso_url": >>> "http://ftp.riken.jp/Linux/centos/7/isos/x86_64/CentOS-7-x86_64-DVD-1511.iso;, >>> "iso_checksum": >>> "907e5755f824c5848b9c8efbb484f3cd945e93faa024bad6ba875226f9683b16", >>> "iso_checksum_type": "sha256", >>> "disk_size": "10240", >>> "disk_type_id": "thin", >>> "remote_host": "host", >>> "remote_datastore": "ds", >>> "remote_username": "root", >>> "remote_password": "pw", >>> "remote_type": "esx5", >>> "ssh_username": "root", >>> "guest_os_type": "centos-64", >>> "ssh_password": "ps", >>> "ssh_port": 22, >>> "ssh_wait_timeout": "800s", >>> "shutdown_command": "shutdown -h now", >>> "headless": false, >>> "floppy_files": [ >>> "kickstart/ks.cfg" >>> ], >>> "boot_command": " linux inst.text inst.ks=hd:fd0:/ks.cfg >>> ", >>> "boot_wait": "20s", >>> "keep_registered": "true", >>> "vmx_data": { >>> "config.version": 8, >>> "virtualHW.version": 8, >>> "ethernet0.virtualDev": "vmxnet3", >>> "ethernet0.networkName": "VM Network", >>> "ethernet0.addressType": "generated", >>> "ethernet0.present": "TRUE", >>> "ethernet1.virtualDev": "vmxnet3", >>> "ethernet1.networkName": "VLAN100", >>> "ethernet1.addressType": "generated", >>> "ethernet1.present": "TRUE", >>> "ethernet0.pciSlotNumber": "9", >>> "ethernet1.pciSlotNumber": "224", >>> "memsize": "2048", >>> "numvcpus": "2", >>> "cpuid.coresPerSocket": "1", >>> "RemoteDisplay.vnc.enabled": "TRUE", >>> "RemoteDisplay.vnc.port": "5900" >>> >>> } >>> } >>> ] >>> } >>> >>> This is the ks.cfg file I have: >>> >>> >>> # SELinux configuration >>> selinux --enforcing >>> >>> # Installation logging level >>> logging --level=info >>> >>> >>> # Run the Setup Agent on first boot >>> firstboot --enable >>> >>> # Reboot after installation >>> reboot >>> >>> # System timezone >>> timezone --isUtc America/Los_Angeles >>> # Network information >>> network --activate --bootproto=static --device=eth0 --gateway=8.1.132.254 >>> --netmask=255.255.255.0 --ip= 8.1.132.18 —hostname=myhost.com >>> >>> # System bootloader configuration >>> bootloader --append="crashkernel=auto rhgb quiet" --location=mbr >>> --driveorder="sda" >>> >>> # Partition clearing information >>> zerombr >>> clearpart --all --drives=sda >>> >>> # Disk partitioning information >>> part /boot --fstype="ext4" --size=500 >>> part pv.008002 --grow --size=1 >>> volgroup vg_centos --pesize=4096 pv.008002 >>> logvol / --fstype=ext4 --name=lv_root --vgname=vg_centos --grow --size=1024 >>> --maxsize=51200 >>> logvol swap --name=lv_swap --vgname=vg_centos --grow --size=3072 >>> --maxsize=3072 >>> >>> %packages --nobase >>> @^minimal >>> @core >>> kexec-tools >>> >>> %end >>> >>> I however keep getting this error when I run it. >>> >>> => vmware-iso: Waiting for SSH to become available... >>> ==> vmware-iso: Timeout waiting for SSH. >>> ==> vmware-iso: Stopping virtual