Re: [PD] auto 1 loops pix_film (and pix_movie?)
Exactly. Your example is even better than my description... it could be suitable for the FLOSS manual in my opinion. best On Wed, Apr 8, 2009 at 6:37 PM, Jack j...@rybn.org wrote: Here a small exemple.++ Jack Le 8 avr. 09 à 16:52, Marco Donnarumma a écrit : Yes, Connect the second outlet of [pix_film] to [unpack]. Then the first outlet of [unpack] will give you the total amount of frames of the video you load. So you can connect the first outlet of [unpack] to the last inlet of [counter]. This will set the maximum value to reach for [counter]. I use [counter] to play each frame of the video and i send the scratch values in its third inlet. this is how i do it... but as Derek were suggesting there is the [mod] object too.. Derek how do you use it? just for curiosity... thanks.. best On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote: Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit : Hey.. thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;) ++ Jack I was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches. ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best.. Marco Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Hey.. thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. I was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches. ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best.. Marco Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit : Hey.. thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;) ++ Jack I was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches. ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best.. Marco Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/ listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Yes, Connect the second outlet of [pix_film] to [unpack]. Then the first outlet of [unpack] will give you the total amount of frames of the video you load. So you can connect the first outlet of [unpack] to the last inlet of [counter]. This will set the maximum value to reach for [counter]. I use [counter] to play each frame of the video and i send the scratch values in its third inlet. this is how i do it... but as Derek were suggesting there is the [mod] object too.. Derek how do you use it? just for curiosity... thanks.. best On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote: Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit : Hey.. thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;) ++ Jack I was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches. ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best.. Marco Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Sorry, no time to patch it for you now, but basically send the total number of frames output by [pix_film] to the cold inlet of mod, send the output of the counter to the hot inlet of [mod]. By changing the speed of the [metro] in the counter, you change frame playback rate. You can also put another [mod] below that to loop a smaller section, with a [+] following it to make the frame offset. In bad ASCII: [metro (playback speed in ms)] | [f]x[+1] | [mod (total number of frames)] | [mod (length of loop in frames)] | [+ (starting frame of loop)] | (cold inlet of [pix_film]) Hope that makes sense! I'll leave it to you to figure out how to make it run backwards ;-) Best, D. Marco Donnarumma wrote: Yes, Connect the second outlet of [pix_film] to [unpack]. Then the first outlet of [unpack] will give you the total amount of frames of the video you load. So you can connect the first outlet of [unpack] to the last inlet of [counter]. This will set the maximum value to reach for [counter]. I use [counter] to play each frame of the video and i send the scratch values in its third inlet. this is how i do it... but as Derek were suggesting there is the [mod] object too.. Derek how do you use it? just for curiosity... thanks.. best On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org mailto:j...@rybn.org wrote: Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit : Hey.. thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;) ++ Jack I was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches. ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best.. Marco Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com mailto:marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl mailto:de...@umatic.nl Cc: pd-list@iem.at mailto:pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com mailto:49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailto:Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Here a small exemple.++Jack scratchvideo.pd Description: Binary data Le 8 avr. 09 à 16:52, Marco Donnarumma a écrit :Yes, Connect the second outlet of [pix_film] to [unpack].Then the first outlet of [unpack] will give you the total amount of frames of the video you load.So you can connect the first outlet of [unpack] to the last inlet of [counter]. This will set the maximum value to reach for [counter]. I use [counter] to play each frame of the video and i send the scratch values in its third inlet. this is how i do it... but as Derek were suggesting there is the [mod] object too.. Derek how do you use it?just for curiosity... thanks..bestOn Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote: Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :Hey..thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;)++JackI was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches.ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best..MarcoHi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista :::http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: "Convert a melodic element into a rhythmic element" -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. -- Marco Donnarumma aka The !S.A.D!Multimedia Artist, Live PerformerRoma, ITLAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net___ Pd-list@iem.at mailing listUNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Marco Donnarumma aka The !S.A.D!Multimedia Artist, Live PerformerRoma, ITLAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? Marco Message: 3 Date: Mon, 06 Apr 2009 23:11:23 +0200 From: IOhannes m zmoelnig zmoel...@iem.at Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: marius schebella marius.schebe...@gmail.com Cc: pd-list@iem.at pd-list@iem.at Message-ID: 49da6ffb.20...@iem.at Content-Type: text/plain; charset=iso-8859-15; Format=flowed marius schebella wrote: Hi, the help patch sais that auto 1 will not loop the movie, but actually it does. someone want to comment on this? it's a bug. mgadsr IOhannes -- Marco Donnarumma aka The !S.A.D! Multimedia Artist, Live Performer Roma, IT LAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista ::: http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: Convert a melodic element into a rhythmic element ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
Derek Holzer wrote: Hi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) something like that is already there, but not as a separate example (yet...) marius. best! Derek Marco Donnarumma wrote: If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie sending values to its cold inlet. Is this bug connected with the bug you talk about or a normal function of the obj.? besides i noticed pix_movie doens't have this behaviour but is crashing on most of the MAC OS i tried with. is this another known issue? ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] auto 1 loops pix_film (and pix_movie?)
marius schebella wrote: Hi, the help patch sais that auto 1 will not loop the movie, but actually it does. someone want to comment on this? it's a bug. mgadsr IOhannes smime.p7s Description: S/MIME Cryptographic Signature ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
