Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > As you might gather from the title, the next release of the plugin will > add the ability to stream to and control multiple zones of the same AVR > from one LMS player. Control is switched between zones from the Audio > Settings menu and each AVR zone may be turned on and off individually. > All volume and muting requests from the player are directed to the > currently active zone. For both technical and practical reasons, this > feature is only available when running the LMS player with volume fixed > at 100%. I have done fairly extensive preliminary testing using my Denon > AVR-3311ci. However, I currently have no secondary zones set up. Since a > few users have requested this feature in the past (I'm looking at you, > @DavidBulluss), I am hopeful that one or more of you might be willing to > assist with the testing effort. While I believe that these changes meet > or exceed the functional requirements of multi-zone support, I am open > to suggestions for tweaking it. Please contact me here or through a PM > if you are interested. As of right now, only the Squeezer and Squeeze > Ctrl clients are supported, as Material Skin has a problem handling a > technical aspect of the new menu which I am hopeful will be resolved > shortly. If anyone is interested in testing it with iPeng, that would > also be helpful. Here is a screenshot of the zone selection screen on > Squeezer: > > 38914 > > Thanks. As anticipated, I am very interested to test it out. Count me in! Cheers, @DavidBulluss ;) *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
As you might gather from the title, the next release of the plugin will add the ability to stream to and control multiple zones of the same AVR from one LMS player. Control is switched between zones from the Audio Settings menu and each AVR zone may be turned on and off individually. All volume and muting requests from the player are directed to the currently active zone. For both technical and practical reasons, this feature is only available when running the LMS player with volume fixed at 100%. I have done fairly extensive preliminary testing using my Denon AVR-3311ci. However, I currently have no secondary zones set up. Since a few users have requested this feature in the past (I'm looking at you, @DavidBulluss), I am hopeful that one or more of you might be willing to assist with the testing effort. While I believe that these changes meet or exceed the functional requirements of multi-zone support, I am open to suggestions for tweaking it. Please contact me here or through a PM if you are interested. As of right now, only the Squeezer and Squeeze Ctrl clients are supported, as Material Skin has a problem handling a technical aspect of the new menu which I am hopeful will be resolved shortly. If anyone is interested in testing it with iPeng, that would also be helpful. Here is a screenshot of the zone selection screen on Squeezer: 38914 Thanks. +---+ |Filename: Screenshot_2022-10-17-20-24-53.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38914| +---+ Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Spotty 4.0 - integrate local library with your Spotify collection (LMS 8+)
mherger wrote: > > @michael any chance you could build a static spotty helper for armv7? > > The x86_64 static version works on Alpine but the dynamically linked > arm > > helpers don't. > > @sodface: would you mind giving the following binary a try? It might be > > buggy, as it's based on a much newer code base. But would it run on > Arch? > > https://github.com/michaelherger/librespot/suites/8814416475/artifacts/401142356 Seems to be good: Code: (armv7)server:~$ file spotty spotty: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), statically linked, stripped (armv7)server:~$ ./spotty --check ok spotty v1.3.99 - using librespot 0.5.0-dev 5468143 (Built on 2022-10-17, Build ID: WhtSHkCl, Profile: release) {"autoplay":true,"debug":false,"lms-auth":true,"no-ap-port":true,"ogg-direct":true,"podcasts":true,"save-token":true,"temp-dir":true,"version":"1.3.99","volume-normalisation":true,"zeroconf-port":true} I tested it with the above commands on both my qemu arm chroot where I build most of my packages and also on native armv7. I haven't actually tried to use it yet though, but it seems ok? sodface's Profile: http://forums.slimdevices.com/member.php?userid=19057 View this thread: http://forums.slimdevices.com/showthread.php?t=111923 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Qobuz.com streaming plugin
Im trying Qobuz for a free month. Previously only used Spotify for streaming. Im primarily attracted by Qobuzs hi-res content. Im using it with the Qobuz plugin on LMS and Material Skin. Two questions: 1. How do I change the order that my Fvourited albums appear? They default to date-added order, but I want alphabetical by artist, as offered in the Qobuz app. Depsite thast being my choden option in the Qobuz app, the LMS plugin does not offer this as far as I can see. Am I missing a way to do this? 2. How can I make folders within the Playlists secion? I use them a lot in Spotify, and for me theyre really useful to organise that section. Without them, I have a very long and unruly set of playlists. Again, am I missing a way to do this? whitman's Profile: http://forums.slimdevices.com/member.php?userid=9053 View this thread: http://forums.slimdevices.com/showthread.php?t=97146 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Beta Announce] Revised Inguz DSP plugin
foxesden wrote: > I have compiled a linux x64 version and it is available here > https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64 Great! Thank you. Will test it tomorrow. Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009 View this thread: http://forums.slimdevices.com/showthread.php?t=116119 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Beta Announce] Revised Inguz DSP plugin
artatgray wrote: > Hi all, > > I've seeing the following in the log for InguzEQ, its logging level I've > set to "Debug: > > (261) InguzEQ: jiveTopMenu > [22-10-11 05:27:19.5525] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > 0=Bass > [22-10-11 05:27:19.5526] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > 1=Treble > [22-10-11 05:27:19.5528] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > F=Flatness > [22-10-11 05:27:19.5529] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > L=Quietness > [22-10-11 05:27:19.5530] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > B=Balance > [22-10-11 05:27:19.5531] Plugins::InguzEQ::Plugin::debug (261) InguzEQ: > W=Width > > > What I'm concerned about is the Treble value set to "1" when Treble > isn't an option on the control panel. > > What gives? > > Thanks in advance. As far as I can ascertain, these relate to the menu options shown on the Jive console, and I haven't touched these settings. From the notes that I can see, where there are 2 Equalizer settings these are referred to as Bass and Treble, 3 setting is Bass, Mid and Treble. But on the Jive UI the menu options are numbered starting from zero (0). The Web encoding is the same, it simply refers to the number of equalizer settings. Most coding languages start the numbering at zero - just to make life confusing for humans! So in short it refers to the internal values for the menu and is not the setting of gain for treble as this will be 0 initially. I recommend using the Web User interface on the Extras menu as everything is much more responsive. foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286 View this thread: http://forums.slimdevices.com/showthread.php?t=116119 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Beta Announce] Revised Inguz DSP plugin
Zombie wrote: > Thanks, I have a TS-251+ I have compiled a linux x64 version and it is available here https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64 foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286 View this thread: http://forums.slimdevices.com/showthread.php?t=116119 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Beta Announce] Revised Inguz DSP plugin
foxesden wrote: > What QNAP box are you using? I maybe able to figure out what combination > to build from that and upload a version. Thanks, I have a TS-251+ Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009 View this thread: http://forums.slimdevices.com/showthread.php?t=116119 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Beta Announce] Revised Inguz DSP plugin
Zombie wrote: > Ping! > Anyone know where I can find files for other OSs than Win and Debian to > get Inguz working? > I think I need for Linux x86 (QNAP) What QNAP box are you using? I maybe able to figure out what combination to build from that and upload a version. foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286 View this thread: http://forums.slimdevices.com/showthread.php?t=116119 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Spotty 4.0 - integrate local library with your Spotify collection (LMS 8+)
@michael any chance you could build a static spotty helper for armv7? The x86_64 static version works on Alpine but the dynamically linked arm helpers don't. @sodface: would you mind giving the following binary a try? It might be buggy, as it's based on a much newer code base. But would it run on Arch? https://github.com/michaelherger/librespot/suites/8814416475/artifacts/401142356 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Community Firmware for Squeezebox Radio/Touch/Controller and LMS 8
ralphy wrote: > > > I usually wait a few weeks for the early adopters to have a bang at it > just in case something is broken. Nice... Good old fashioned development cycle :D As ever, thanks for all your work in the SB ecosystem Ralphy. Kev KeBul's Profile: http://forums.slimdevices.com/member.php?userid=32883 View this thread: http://forums.slimdevices.com/showthread.php?t=113479 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Community Firmware for Squeezebox Radio/Touch/Controller and LMS 8
Apesbrain wrote: > Maybe I've jumped the gun? Is the 'r16907;10/4/22 firmware' > (https://sourceforge.net/projects/lmsclients/files/squeezeos/) released > for the plugin to download? No. I haven't released it through the plugin yet. I usually wait a few weeks for the early adopters to have a bang at it just in case something is broken. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=113479 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Community Firmware for Squeezebox Radio/Touch/Controller and LMS 8
Apesbrain wrote: > Maybe I've jumped the gun? Is the 'r16907;10/4/22 firmware' > (https://sourceforge.net/projects/lmsclients/files/squeezeos/) released > for the plugin to download?Probably not released yet. I am on r16881. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=113479 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Community Firmware for Squeezebox Radio/Touch/Controller and LMS 8
bengaldave wrote: > First let me say I have been running community firmware and it is > working fine! So thanks for the effort! > > The question, is the project for the firmware setup differently than lms > such that it had to renamed community firmware? > > What was the last official firmware for the touch and radio? Logitech abandoned LMS 10 years ago. https://forums.slimdevices.com/showthread.php?96188-New-Squeezebox-Radio=714488=1#post714488 Last official firmware for Touch is - 7.8.0_r16754 Last official firmware for Radio is - 7.7.3_r16676 The community firmware is just that, developed by a few community members and not supported by Logitech. *Server - LMS 8.3.0 *RPi4B 4GB/NanoSound ONE case/pCP 8.1.0 - 75K library, playlists & LMS cache on Sata SSD (ntfs) *Lounge* - DAC32 - AudioEngine B2 *Office* - RPi 3B+/HiFiBerry DAC HAT/RPi screen - Edifier D12 *Bedroom* - Echo Show 8 *Spares* - 1xSB Touch, 1xSB3, 3xRPi, 1xCORE32, AVI DM5 speakers kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=113479 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: CastBridge = integrate Chromecast players with LMS (squeeze2cast)
After a bit of thought overnight I realised that my problem was caused by a clash of ports between Chromecast Bridge and Jriver Media server, I'd forgotten that I'd recently enabled Jriver's media server on the same PC. tromstar's Profile: http://forums.slimdevices.com/member.php?userid=68131 View this thread: http://forums.slimdevices.com/showthread.php?t=104614 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins