Hi,
I've already managed to sync Seq24 to Jack, so that playing Jack
starts the Seq24 sequencer. However, I can't seem to get Jack to sync
to my Electribe, either clocking the tempo or starting/stopping
whenever I start/stop on my Electribe.
Anyone got any ideas?
Loz
On Sat, Mar 26, 2011 at 4:30 AM, geoffroy tremblay g...@ponnuki.net wrote:
you are right seq24 will not accept midi clock directly (but will send
midi clock directly...)
yeah there is not much information about it around - i found a bit of
info that might do the trick
http://ooommm.org/sudelwiki/Seq24
which at least give you some trick to start seq24 visible in jack:
seq24 --manual_alsa_ports
and the jack sync :
Setting up JACK-Sync in seq24:
File - Options - Jack Sync
check Jack Transport Song Mode, then hit CONNECT
you can leave the seq24-window now and go back to Ardour or JACK/qjackctl
let me know where you get with that I would be interested to see how
you can set that up.
On Fri, Mar 25, 2011 at 4:18 AM, Loz mister...@gmail.com wrote:
Hey,
If that's true, that's great. I'm pretty certain I've tried this, and
Seq24 will not clock to an external source, apart from Jack.
On Thu, Mar 24, 2011 at 10:45 PM, geoffroy tremblay g...@ponnuki.net wrote:
I don't think you need jack to run seq24 - it detect the input and
midi output automatically no ?
I use it to control my dark energy at home and I am pretty sure I
don't use jack -
that is if you only want to use seq24
I'll check my setup and let you know tomorrow.
On Thu, Mar 24, 2011 at 10:04 AM, Loz mister...@gmail.com wrote:
No worries. I'll answer the questions I probably should have
pre-emptively answered
you have a midi-in, on your sound card and you connect your sequencer
to it right ?
Yep
what sequencer are you using ? and are you sure it's spitting out your
midi clock ?
Korg Electribe-SX. It's definitely sending out MIDI clock, along with
start and stop messages, because it can sequence other hardware with
no issues. I've also used it a couple of times to start off my DAW on
my windows PC.
And what software are you using on jack ?
Just Seq24 at the moment. This is my new live setup. Want to use the
Electribe as the midi master, as I have tempo data programmed into
patches, so I don't have to remember to change tempo all the time (as
I forget). However, the internal note sequencers on the Electribe (of
which there are two) are mono only, and I use Seq24 for my keyboard
parts.
You should be able to map your midi-in clock in jack to any midi
capable software (or jack capable software)
This is where I'm falling down. Think I'm doing this right, but I've
found surprisingly little documentation on this online.
Thanks,
Loz
---
Puredyne@goto10.org
http://identi.ca/group/puredyne
irc://irc.goto10.org/puredyne
