Re: [Qgis-user] FGDC Geology Symbology for QGIS: add contributions where?
Il 17/04/2015 04:20, Stefan Revets ha scritto: Hello All, Is there an appropriate spot where a sizable chunk of FGDC Geology Symbology can be deposited? As I had a bit of time on my hands, I managed to bring 36 contacts, 112 faults, 10 joints and 120 folds symbols into QGIS. In addition, there are also three qml files with the geochron systems, series and stages names and colours according to the Commission for the Geological Map of the World. Hi Stefan, thanks for this. Unfortunately we do not yet have a symbol and style repository in place. I think this would be a great addition to QGIS, but unfortunately nobody seems to have the resources and interest to do it. In case anybody needs it, we will be happy of helping. All the best. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] FGDC Geology Symbology for QGIS: add contributions where?
Hi Paolo, Maybe he should reopen http://hub.qgis.org/issues/1694 and upload the symbols under that ticket. That ticket is about 6 years old, but the QGIS community is much larger, and I'm sure there is more interest in the FGDC symbols (http://ngmdb.usgs.gov/fgdc_gds/geolsymstd.php). Regards, Bob (aka cgs_bob) On Apr 16, 2015 11:07 PM, Paolo Cavallini cavall...@faunalia.it wrote: Il 17/04/2015 04:20, Stefan Revets ha scritto: Hello All, Is there an appropriate spot where a sizable chunk of FGDC Geology Symbology can be deposited? As I had a bit of time on my hands, I managed to bring 36 contacts, 112 faults, 10 joints and 120 folds symbols into QGIS. In addition, there are also three qml files with the geochron systems, series and stages names and colours according to the Commission for the Geological Map of the World. Hi Stefan, thanks for this. Unfortunately we do not yet have a symbol and style repository in place. I think this would be a great addition to QGIS, but unfortunately nobody seems to have the resources and interest to do it. In case anybody needs it, we will be happy of helping. All the best. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] FGDC Geology Symbology for QGIS: add contributions where?
Il 17/04/2015 08:17, Bob and Deb ha scritto: Hi Paolo, Maybe he should reopen http://hub.qgis.org/issues/1694 and upload the symbols under that ticket. That ticket is about 6 years old, but the QGIS community is much larger, and I'm sure there is more interest in the FGDC symbols (http://ngmdb.usgs.gov/fgdc_gds/geolsymstd.php). Or rather, add it here: http://hub.qgis.org/issues/7981 Thanks. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] information stored in a project file (2.8)
Hello, I had a look at my *.qgs-files and so far I understand that there is information stored about * Layers added * Layer properties, icluding symbolisation and styles * Projection for the map view * Last viewed extend * Print Composers * Print Composer elements with settings * Print Composer atlas settings * Digitizing settings Did I miss something essential? I want to insert the descriptions into the QGIS user manual 2.8. Thanks in advance. Kind regards, Larissa ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS and Oracle Mastermap Vector indexing
Hi, I'm having problems when using MasterMap vector data for snapping in QGIS. This data is being brought into QGIS from an oracle database. It works fine until I go onto another layer (Not MasterMap Vector layers) and try to add a feature. It appears to try and index the whole of the MasterMap vector database, which causes QGIS to fall over. Is they a way to restrict the indexing to only index the area that is currently rendered or a workaround maybe to allow me to snap to the vector data without having to take a separate extract of the area required each time? Cheers Stephen -- Any email message sent or received by the Council may require to be disclosed by the Council under the provisions of the Freedom of Information (Scotland) Act 2002. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Qgis-developer] information stored in a project file (2.8)
I would add plugins settings, custom layer properties On 04/17/2015 11:36 AM, Larissa Junek wrote: Hello, I had a look at my *.qgs-files and so far I understand that there is information stored about * Layers added * Layer properties, icluding symbolisation and styles * Projection for the map view * Last viewed extend * Print Composers * Print Composer elements with settings * Print Composer atlas settings * Digitizing settings Did I miss something essential? I want to insert the descriptions into the QGIS user manual 2.8. Thanks in advance. Kind regards, Larissa ___ Qgis-developer mailing list qgis-develo...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-developer ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] problem with SAGA in Qgis 2.6.1 istalled on Windows 8.1
Probably it depends on the version of SAGA installed on your computer. Which version do you have? Cheers Matteo 2015-04-17 14:13 GMT+02:00 Gismondo Maria Mancini gismondomariamanc...@yahoo.it: Hello, Thank you in advance for your availability I have a problem with Qgis 2.6.1 istalled on Windows 8.1.It seems the functions of saga are not present in Processing toolbox. As if the algorithms of SAGA are not integrated into Qgis. There is a solution to this problem? Thank you!!! Gismondo. (ITALY) ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Composite satellite images
Hi. May I ask about making a composite image from three Landsat image bands? And then sharpen the image file using the Panchromatic band? I see the tutorial at http://wiki.awf.forst.uni-goettingen.de/wiki/index.php/Creating_a_multi-band_GeoTIFF, but this does not make an image where RGB items are allocated to the different downloaded bands from a Landsat image. Is there a way in Q that I can create an image based on three bands of a Landsat image, and theen use Panchromatic band to sharpen it? Many thanks. --Susan. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] information stored in a project file (2.8)
Hei Larissa, Not sure how essential / relevant it is: QGIS version and Queries stored in dbManager go also into the project file (at the moment). Cheers Stefan -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Larissa Junek Sent: 17. april 2015 11:36 To: QGIS Mailing List; qgis-develo...@lists.osgeo.org Subject: [Qgis-user] information stored in a project file (2.8) Hello, I had a look at my *.qgs-files and so far I understand that there is information stored about * Layers added * Layer properties, icluding symbolisation and styles * Projection for the map view * Last viewed extend * Print Composers * Print Composer elements with settings * Print Composer atlas settings * Digitizing settings Did I miss something essential? I want to insert the descriptions into the QGIS user manual 2.8. Thanks in advance. Kind regards, Larissa ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] problem with SAGA in Qgis 2.6.1 istalled on Windows 8.1
Hello, Thank you in advance for your availability I have a problem with Qgis 2.6.1 istalled on Windows 8.1.It seems the functions of saga are not present in Processing toolbox. As if the algorithms of SAGA are not integrated into Qgis. There is a solution to this problem?Thank you!!!Gismondo. (ITALY) ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Processing modeler input columns in algorithms
Hi all, is it possible to add the column names of the output of an algorithm inside a second one? In other words: * run an algorithm on a shapefile that has as output a csv table with many columns * I'd like to run a second algorithm, e.g. making a scatterplot. But i want to choose the 2 columns needed from the output of the first algorithm. The only way I found is to write manually the column names. In this case, the problem is that, if the column names change, the model doesn't work anymore. I hope I made myself clear. If you want here http://gis.stackexchange.com/questions/142950/put-output-of-saga-algorithm-of-processing-model-in-r-script is an example with some screenshots. Thanks! Matteo ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Dotted line symbol in QGIS
Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines... [cid:image001.png@01D0790B.A0DC55E0] Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Dotted line symbol in QGIS
Hi Stefan Yes I can do that, just wondered if there were any settings I could change before I added another symbol - did look at the blend modes but none seemed to work. Its ok I can do it that way. Thanks From: Ziegler Stefan [mailto:stefan.zieg...@bd.so.ch] Sent: 17 April 2015 13:05 To: Chris Buckmaster; 'qgis-user@lists.osgeo.org' Subject: AW: Dotted line symbol in QGIS Hi Put a white line under the dotted line (Add symbol layer). Perhaps there is also a solution with the blending modes? Regards Stefan Von: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Chris Buckmaster Gesendet: Freitag, 17. April 2015 13:40 An: qgis-user@lists.osgeo.org Betreff: [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines... [cid:image001.png@01D0790F.6A057FC0] Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Dotted line symbol in QGIS
Hi Put a white line under the dotted line (Add symbol layer). Perhaps there is also a solution with the blending modes? Regards Stefan Von: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Chris Buckmaster Gesendet: Freitag, 17. April 2015 13:40 An: qgis-user@lists.osgeo.org Betreff: [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines... [cid:image001.png@01D07917.720ABF20] Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Clean a raster layer converted in vector layer
Dear forum I converted my raster layer in a vector - polygons one. The operation worked, but now I have a many small isolated polygons with one or few pixels dimension. Many of those small polygons also overlay the correct polygons. Ho can I easily remove this? Thank you very much Giacomo ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Dotted line symbol in QGIS
Hey Stefan, Neat trick/idea with the white line. I'll have to write that one down. Hmm, I wonder instead of white though, if you could convert that to transparent as well . . . . Bobb From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ziegler Stefan Sent: Friday, April 17, 2015 7:05 AM To: 'Chris Buckmaster'; 'qgis-user@lists.osgeo.org' Subject: Re: [Qgis-user] Dotted line symbol in QGIS Hi Put a white line under the dotted line (Add symbol layer). Perhaps there is also a solution with the blending modes? Regards Stefan Von: qgis-user-boun...@lists.osgeo.orgmailto:qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Chris Buckmaster Gesendet: Freitag, 17. April 2015 13:40 An: qgis-user@lists.osgeo.orgmailto:qgis-user@lists.osgeo.org Betreff: [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines... [cid:image001.png@01D078F4.72293180] Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Re : Dotted line symbol in QGIS
Hi. and what about using the Draw line only inside polygon option? Envoyé depuis mon HTC - Reply message - De : Chris Buckmaster chris.buckmas...@runnymede.gov.uk Pour : David Fawcett david.fawc...@gmail.com, Basques, Bob (CI-StPaul) bob.basq...@ci.stpaul.mn.us Cc : qgis-user@lists.osgeo.org qgis-user@lists.osgeo.org Objet : [Qgis-user] Dotted line symbol in QGIS Date : ven., avr. 17, 2015 18:08 Thanks David although we are using live data. Stefan’s approach is a good one so I think I will continue with that, thanks for everyone’s responses Chris From: David Fawcett [mailto:david.fawc...@gmail.com] Sent: 17 April 2015 17:01 To: Basques, Bob (CI-StPaul) Cc: Ziegler Stefan; Chris Buckmaster; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Dotted line symbol in QGIS Here is another solution that would work if you are not mapping live data, and you can use a derived product. Convert your polygon dataset to lines. The, use VectorDissolve to remove duplicated lines where they are overlapping. David. On Fri, Apr 17, 2015 at 9:54 AM, Basques, Bob (CI-StPaul) bob.basq...@ci.stpaul.mn.us wrote: Hey Stefan, Neat trick/idea with the white line. I’ll have to write that one down. Hmm, I wonder instead of white though, if you could convert that to transparent as well . . . . Bobb From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ziegler Stefan Sent: Friday, April 17, 2015 7:05 AM To: 'Chris Buckmaster'; 'qgis-user@lists.osgeo.org' Subject: Re: [Qgis-user] Dotted line symbol in QGIS Hi Put a white line under the dotted line („Add symbol layer“). Perhaps there is also a solution with the blending modes? Regards Stefan Von: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Chris Buckmaster Gesendet: Freitag, 17. April 2015 13:40 An: qgis-user@lists.osgeo.org Betreff: [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines… Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Dotted line symbol in QGIS
Here is another solution that would work if you are not mapping live data, and you can use a derived product. Convert your polygon dataset to lines. The, use VectorDissolve to remove duplicated lines where they are overlapping. David. On Fri, Apr 17, 2015 at 9:54 AM, Basques, Bob (CI-StPaul) bob.basq...@ci.stpaul.mn.us wrote: Hey Stefan, Neat trick/idea with the white line. I’ll have to write that one down. Hmm, I wonder instead of white though, if you could convert that to transparent as well . . . . Bobb *From:* qgis-user-boun...@lists.osgeo.org [mailto: qgis-user-boun...@lists.osgeo.org] *On Behalf Of *Ziegler Stefan *Sent:* Friday, April 17, 2015 7:05 AM *To:* 'Chris Buckmaster'; 'qgis-user@lists.osgeo.org' *Subject:* Re: [Qgis-user] Dotted line symbol in QGIS Hi Put a white line under the dotted line („Add symbol layer“). Perhaps there is also a solution with the blending modes? Regards Stefan *Von:* qgis-user-boun...@lists.osgeo.org [ mailto:qgis-user-boun...@lists.osgeo.org qgis-user-boun...@lists.osgeo.org] *Im Auftrag von *Chris Buckmaster *Gesendet:* Freitag, 17. April 2015 13:40 *An:* qgis-user@lists.osgeo.org *Betreff:* [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines… Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Dotted line symbol in QGIS
Thanks David although we are using live data. Stefan’s approach is a good one so I think I will continue with that, thanks for everyone’s responses Chris From: David Fawcett [mailto:david.fawc...@gmail.com] Sent: 17 April 2015 17:01 To: Basques, Bob (CI-StPaul) Cc: Ziegler Stefan; Chris Buckmaster; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Dotted line symbol in QGIS Here is another solution that would work if you are not mapping live data, and you can use a derived product. Convert your polygon dataset to lines. The, use VectorDissolve to remove duplicated lines where they are overlapping. David. On Fri, Apr 17, 2015 at 9:54 AM, Basques, Bob (CI-StPaul) bob.basq...@ci.stpaul.mn.usmailto:bob.basq...@ci.stpaul.mn.us wrote: Hey Stefan, Neat trick/idea with the white line. I’ll have to write that one down. Hmm, I wonder instead of white though, if you could convert that to transparent as well . . . . Bobb From: qgis-user-boun...@lists.osgeo.orgmailto:qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.orgmailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ziegler Stefan Sent: Friday, April 17, 2015 7:05 AM To: 'Chris Buckmaster'; 'qgis-user@lists.osgeo.orgmailto:qgis-user@lists.osgeo.org' Subject: Re: [Qgis-user] Dotted line symbol in QGIS Hi Put a white line under the dotted line („Add symbol layer“). Perhaps there is also a solution with the blending modes? Regards Stefan Von: qgis-user-boun...@lists.osgeo.orgmailto:qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von Chris Buckmaster Gesendet: Freitag, 17. April 2015 13:40 An: qgis-user@lists.osgeo.orgmailto:qgis-user@lists.osgeo.org Betreff: [Qgis-user] Dotted line symbol in QGIS Hi I have a boundary layer that I want to symbolise with a dotted line. The outer boundary appears ok, but where two polygons are adjacent to each other, the dotted line becomes virtually solid (indicated below). How can I make these lines appear the same as my outer boundary lines… [cid:image001.png@01D07931.17B10560] Thanks, Chris ___ Qgis-user mailing list Qgis-user@lists.osgeo.orgmailto:Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Clean a raster layer converted in vector layer
Hi Giacomo, i would recommend filtering the raster before vectorizing. You can use the sieve tool or a majority filter (via processing). With the sieve tool you can set a threshold value which will define the minimum number of pixels a cluster must have to be preserved, otherwise it will be merged with the neighboring clusters. Cheers -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Clean-a-raster-layer-converted-in-vector-layer-tp5201847p5201865.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] FGDC Geology Symbology for QGIS: add contributions where?
Randy Hale did a similar thing with American Planning Assoc styles. http://www.northrivergeographic.com/archives/building_styles_for_qgis Maybe there is critical mass now... On Fri, Apr 17, 2015 at 1:57 AM, Torsten Lange torsten.la...@mail.de wrote: Hi Stefan, I think, this is a great contribution and will be definitly an important feature once it is in QGIS! Best, Torsten Am 17-Apr-2015 04:26:41 +0200 schrieb s.rev...@bigpond.com: Hello All, Is there an appropriate spot where a sizable chunk of FGDC Geology Symbology can be deposited? As I had a bit of time on my hands, I managed to bring 36 contacts, 112 faults, 10 joints and 120 folds symbols into QGIS. In addition, there are also three qml files with the geochron systems, series and stages names and colours according to the Commission for the Geological Map of the World. Thanks, Stefan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] grass algorithm r.report on qgis 2.8
Hi, One of the most used algorithm by me is the r.report to create statistic reports and I can't find it in the newest versions of QGIS 2.6 and 2.8, is it available? If not, is there some equivalent? Thanks -- *Francesc Cañas http://francescsig.info/* Ambientoleg SIG http://francescSIG.info http://aixonoesunblog.blogspot.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Composite satellite images
Hi Susan, first you need to use the merge/combine (i don't remember the exact name of the tool in English) located in the Raster Miscellaneous menu. You have to check the option 'stack layers'. To pansharpen the image, first you have to see if you have Orfeo Toolbox installed and configured (in the Processing menu). If it is installed you can continue by using the sumperimpose tool (in the processing toolbox). After the superimpose has finished you can do the pansharpening using the pansharpening (rcs) algorithm found in the processing toolbox. Cheers -- View this message in context: http://osgeo-org.1560.x6.nabble.com/Composite-satellite-images-tp5201852p5201867.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user