Re: [Qgis-user] How to limit number of "Recent Projects" listed - Correction

[David Strip]

  
  
If you just want to hide the recent projects on the opening screen,
go to Settings->General->Project Files and select something
other than "Most Recent" "Welcome Page".



If you still want a list of recent projects, but a shorter list, go
to Settings->Advanced and search for maxRecent and change the
value. This will also change the length of the list of recent
projects in Project->Open Recent

  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] How to limit number of "Recent Projects" listed

[David Strip]

  
  
If you just want to hide the recent projects on the opening screen,
go to Settings->General->Project Files and select something
other than "Most Recent".



If you still want a list of recent projects, but a shorter list, go
to Settings->Advanced and search for maxRecent and change the
value. This will also change the length of the list of recent
projects in Project->Open Recent

  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] How to limit number of "Recent Projects" listed

[Jeff Sonnentag]

I searched a little and didn't find anything about how to limit the number of 
"Recent Projects" shown after QGIS opens.  I did find that some settings are in 
Settings > Options > General but none that can be seen that refer to the number 
of "Recent Projects" displayed.

Because the list keeps growing and initial opening of QGIS continued to slow 
down I took a guess and right-clicked and removed some and it sped things up 
considerably.  It crashed on the last one attempted to remove from the list, 
but a restart and another removal attempt got rid of that one too.

So is there a setting for how many are allowed on the list (preferably with an 
option for 0) or do I need to just right-click and remove when things start 
piling up and slowing things down again?


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QEP 209: Expose OGR feature styles via a new "Embedded styling" renderer

[Nyall Dawson]

Hi all,

Please see https://github.com/qgis/QGIS-Enhancement-Proposals/issues/209
for a newly filed QGIS Enhancement Proposal: "Expose OGR feature
styles via a new "Embedded styling" renderer".

Some vector data formats have native support for embedding feature
styling information, such as MapInfo TAB files. These formats allow
embedded symbology to be set on a feature-by-feature basis. This
proposal concerns exposing this per-feature styling information via
the QGIS API and creation of a new "embedded styling" renderer for
compatible vector layers, which allows users to view features using
the closest possible match to their original symbology.

Comments and discussion welcome! (please keep discussion on
https://github.com/qgis/QGIS-Enhancement-Proposals/issues/209 and not
via email replies in order to keep all conversation centralized!).

Regards,
Nyall
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] distance between rectangle polygon in Qgis

[Marin Mirosevic]

Hi Nicolas
Yes that is what i mean

Dohvati Outlook za iOS

Šalje: Nicolas Cadieux 
Poslano: Monday, February 15, 2021 9:45:08 PM
Prima: Marin Mirosevic 
Kopija: qgis-user@lists.osgeo.org 
Predmet: Re: [Qgis-user] distance between rectangle polygon in Qgis

Hi,

I think you will need to delete duplicate nodes, then export the polygon nodes 
(vertices) to a new point layer.  Then, I would apply a distance matrix. Write 
back if you want more details.  This is for the distances between the nodes 
within a polygon right?

Nicolas Cadieux
https://gitlab.com/njacadieux

Le 15 févr. 2021 à 12:35, Marin Mirosevic  a écrit :



Hello,



Is there a way to calculate distance between points of the polygon ?



I tried to find in “filed calculator “ under geometry but I found just 
$perimeter and that is whole bounding line of the polygon.







With regards/ Vennlig hilsen





Marin Mirosevic

Consultant
Mobil +47 909 67 511

marin.mirose...@bouvet.no





Bouvet Norge AS

bouvet.no







___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] pan and zoom during temporal animation

[Eric Sorensen]

Thank you for the information Richard. Based on your input, I think I see a 
path forward. 

es

> On Feb 15, 2021, at 1:03 AM, Richard Duivenvoorde  wrote:
> 
> On 2/14/21 9:04 PM, Eric Sorensen wrote:
>> Is it possible to control pan and zoom of a view during a temporal animation?
> 
> Nope, for what I know, the only changing dimension is time.
> 
>> If so, is there a “how to” out on the web you could point me to?
> 
> Don't think so.
> 
> I think this would need some 'playbook' in which at certain times QGIS 
> changes it's extent...
> In the end not so difficult, but to create the playbook would need some gui.
> 
> Maybe you can script it yourself though.
> 
> The TemporalNavigationController you can call from QGIS, so you can 
> 'step,step,step,change-extent,step,step' etc...
> 
> I wrote some code on how to code on this, but am not able to get it through 
> CI:
> https://github.com/qgis/QGIS-Documentation/pull/5521
> maybe you can use that.
> 
> Regards,
> 
> Richard Duivenvoorde
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] distance between rectangle polygon in Qgis

[C Hamilton]

There is a nifty function provided by the "Shape Tools" plugin called
"Geodesic measurement layer". It will create a new layer of your polygon
layer and measure each segment between nodes in the polygon or measure the
total circumference of the polygon. You can select which you want. You can
choose what measurement unit you want to use (miles, kilometer, meters,
etc) and it records everything in the attribute layer and even styles the
new layer so that it shows all the measurements in the QGIS display. The
function also works on a line layer. It makes it very easy to instantly see
distances with lines or polygons.

https://plugins.qgis.org/plugins/shapetools/


Calvin



On Mon, Feb 15, 2021 at 12:35 PM Marin Mirosevic 
wrote:

> Hello,
>
>
>
> Is there a way to calculate distance between points of the polygon ?
>
>
>
> I tried to find in “filed calculator “ under geometry but I found just 
> *$perimeter
> *and that is whole bounding line of the polygon.
>
>
>
>
>
>
>
> With regards/ Vennlig hilsen
>
>
>
>
>
> *Marin Mirosevic*
>
>
> *Consultant *Mobil +47 909 67 511
>
> *marin.mirose...@bouvet.no *
>
>
>
>
>
> *Bouvet Norge AS*
>
> *bouvet.no* 
>
>
>
>
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Inserting a Simple Straight Line

[Andrea Giudiceandrea]

Jon Fox wrote
> I tried to insert a straight line by using
> various combinations of right- or left-clicking, and by hitting the
> "enter"
> key, but the line keeps continuing on as if I can only make a polyline. 

Hi Jon,
if I understand correctly your request, you just need to follow the rule for
drawing lines in QGIS:

- "left click" for the first (initial) point of the segment
- "left click" for the second (final) point of the segment
- "right click" to terminate the drawing of the line.

Regards.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Traduzione QGIS 3

[Andrea Giudiceandrea]

Andrea Giudiceandrea wrote
> Attualmente le due nuove frasi, corrette, non sono presenti in Transifex.
> 
> Non so se e quando tali stringhe verranno aggiornate su Transifex (né se
> ce
> ne siano altre modificate e non ancora aggiornate o se ci sia in modo per
> scoprirlo) e sarà possibile inserire la relativa traduzione.

Oggi è stata aggiornata la resource "release-3-16--qgis-application" con
l'aggiunta delle due stringhe modificate che ho segnalato, più altre due
stringhe.

Ho provveduto ad aggiornare la traduzione in italiano delle due stringhe
"Cartesian calculation selected, so distance is calculated using Cartesian
calculations."
e
"No map projection set, so distance is calculated using Cartesian
calculations."

Rimane da aggiornare la traduzione delle altre due stringhe che risultano
essere state modificate:

3056 "Name of the actual vapour pressure (e_act) map [KPa]" (GrassAlgorithm)
e
13344 "'This is a test'" (QgsExpression)

sulle quali non sono voluto intervenire direttamente.

Comunque faccio notare che "actual vapour pressure" dovrebbe tradursi in
italiano come "pressione di vapore effettiva" e non come "attuale della
pressione di vapore" ("actual" è spesso un falso amico inglese...)

A presto.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] distance between rectangle polygon in Qgis

[kirk]

Another option is to convert the polygons to lines and the calculate the length 
if each line in the attribute table.Sent from my Galaxy
 Original message From: Marin Mirosevic 
 Date: 2021-02-15  6:41 p.m.  (GMT-04:00) To: 
Nicolas Cadieux  Cc: qgis-user@lists.osgeo.org 
Subject: Re: [Qgis-user] distance between rectangle polygon in Qgis 



Hi Nicolas

Yes that is what i mean



Dohvati Outlook za iOS


Šalje: Nicolas Cadieux 
Poslano: Monday, February 15, 2021 9:45:08 PM
Prima: Marin Mirosevic 
Kopija: qgis-user@lists.osgeo.org 
Predmet: Re: [Qgis-user] distance between rectangle polygon in Qgis
 

Hi,


I think you will need to delete duplicate nodes, then export the polygon nodes 
(vertices) to a new point layer.  Then, I would apply a distance matrix. Write 
back if you want more details.  This is for the distances between the nodes 
within a polygon right?

Nicolas Cadieux
https://gitlab.com/njacadieux


Le 15 févr. 2021 à 12:35, Marin Mirosevic  a écrit :






 



Hello,
 
Is there a way to calculate distance between points of the polygon ?
 
I tried to find in “filed calculator “ under geometry but I found just
$perimeter 
and that is whole bounding line of the polygon.
 
 
 
With regards/ Vennlig hilsen
 
 
Marin Mirosevic
Consultant
Mobil +47 909 67 511
marin.mirose...@bouvet.no
 
 
Bouvet Norge AS
bouvet.no
 
 
 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user






___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] free web host for output of QGIS2web

[Stephen Sacks]

I want my map to be available on a free web host. QGIS2web seems to do a 
good job of preparing it for export.  My base map is Google Hybrid.  
Does that mean I must use Google Cloud as web host?   Can I use files 
created by QGIS2web on other web hosts ?  (Infinityfree,  Byethost,  
WordPress, WIX, . . . )

  Thanks for any advice.
 Steve


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] distance to nearest point

[Ryan Peel]

I want to show a label for a point feature in layer1 that is based on the
distance to the nearest point feature from another layer, layer2.
Additionally, I want to bring over an attribute from layer2.  Last, I'd
like to have the cardinal direction toward the object. Is this possible?

So, my label for layer1 would look something like this.

Point1: 100ft W of pole ID 123

Thanks,

Ryan
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Raster Calculator Error Questions

[Wanda Norman]

Hello,

Yes, I did remove the spaces and fixed it as mentioned in the various
emails. It is working now.  Newbie mistake I guess.

Thank you all for the wonderful support.  I appreciate it!

Wanda

On Mon, Feb 15, 2021 at 3:53 PM Nicolas Cadieux 
wrote:

> Thayer’s instructions look good.
>
> Start by building query one step at a time.  You can separate the parts
> using the pipe sign ||.  Then, change the || for the operators OR. That
> would help you trouble shoot the operation.
>
>  I think he is right.  The problem is likely the space between <=.
>
> Nicolas Cadieux
> https://gitlab.com/njacadieux
>
> Le 13 févr. 2021 à 10:57, Thayer Young  a écrit :
>
> 
> Hi Wanda,
>
> Please try removing the spaces between the operators, the tool should not
> run with those spaces:
> they should be: <= and >= not < = and > =
>
> Also make sure that the name of the raster layer is EXACTLY the same as
> what you have in your Layers panel (what the ESRI work calls Table of
> Contents). The double quotes around the name are there just in case you
> have a space in the name of the raster Layer. You can safely remove them if
> there are no spaces. The parenthesis are also not necessary, because of the
> order of operations (the same as in basic algebra). The <= and >= will
> calculate before the OR, so there is no need for parenthesis. You would
> only need parenthesis if the expression were more complicated.
> The following should work equally well:
>
> Aspect@1<=90 OR Aspect@1>=270
> Aspect@1 <= 90 OR Aspect@1 >= 270
> "Aspect@1" <= 90 OR "Aspect@1" >= 270
> ("Aspect@1" <= 90) OR ("Aspect@1" >= 270)
>
> But if your layer is named "Aspect" but you enter "aspect", the raster
> calculator will say the expression is valid but then show a red banner
> error after it is run.
> This is because the expression looks fine to the raster calculator tool,
> but it does not check for the existence of the layer until you press OK. In
> this case it can not find a layer "aspect" because the layer is named
> "Aspect".
>
> I have tried reproducing your problem using the OSGeo4W Network Installer
> QGIS 10.10 without GRASS, but I am not able to. If the recommendations
> above are not helpful, you may need to give more specifics about the errors
> you are seeing and which installation you are using. I hope this helps :-)
>
> -Thayer
>
> P.S. I did have a problem with the extent not being set correctly when I
> had more than one DEM. Everything ran without errors, but the result was
> empty, except for a thin band where the two DEMs overlapped. You may need
> to be careful to set this to the correct extent, so click on your Aspect
> layer and then Selected Layer Extent.
>
>
>
> ==
> Date: Fri, 12 Feb 2021 14:12:49 -0500
> From: Wanda Norman 
> To: Nicolas Cadieux 
> Cc: qgis-user 
> Subject: Re: [Qgis-user] Raster Calculator Error Questions
> Message-ID:
> 
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Nicolas for the quick response.  But I am still having issues.
>
> I did upgrade to the 3.16 version and I am still unable to write the
> formula.  I tried:  ( "aspect@1" < = 90) OR ( "aspect@1" > = 270) - I get
> Expression is not valid. As soon as I put anything other than "aspect@1" I
> get a message that the expression is not valid.
>
> This is the first time using the raster calculator and it looks as if I
> can't move forward with the lesson without this step.
>
> Any other suggestions?
>
> Thanks for your help!
> Wanda
>
>
>
> On Fri, Feb 12, 2021 at 10:08 AM Nicolas Cadieux <
> njacadieux.git...@gmail.com> wrote:
>
> > Hi,
> > I have not used the raster calculator in a while but I am not sure about
> > you use of the \.
> > Examples in the user manual (
> >
> https://docs.qgis.org/3.16/en/docs/user_manual/working_with_raster/raster_analysis.html#raster-calculator
> )
> > use this as examples.
> >
> > ("elevation@1" < 50) * 1 + ("elevation@1" >= 50) * 2
> >
> >
> > I would try (expression 1) OR (expression 2).  Layers names must be
> placed
> > between quotes ??.
> >
> > You could also update your QGIS version to 3.16.
> >
> > Nicolas Cadieux
> > https://gitlab.com/njacadieux
> >
> > Le 12 f?vr. 2021 ? 09:09, Wanda Norman  a
> > ?crit :
> >
> > ?
> >
> > Greetings friends:
> >
> >
> >
> > I am working on lesson 7.3.5 in the User Guide / Manual (QGIS 3.10) ?
> > Following along: Using the Raster Calculator.
> >
> >
> >
> > I am having difficulty with the calculation formula as indicated below:
> >
> >
> >
> > The manual states this formula should be used:
> >
> >Aspect@1 <=90 OR Aspect@1 >= 270
> >
> > Which I am assuming is incorrect because a) I get an error when I run it;
> > and b) when I set the parameters using the expression operators the
> formula
> > looks like this:
> >
> >?Aspect@1? <=90 OR ?Aspect@1? >=270
> >
> > However, I still get the error:
> >
> > Error parsing formula
> >
> > Execution failed after 0.02 seconds
> >
> 

[Qgis-user] distance between rectangle polygon in Qgis

[Marin Mirosevic]

Hello,

Is there a way to calculate distance between points of the polygon ?

I tried to find in "filed calculator " under geometry but I found just 
$perimeter and that is whole bounding line of the polygon.



With regards/ Vennlig hilsen


Marin Mirosevic
Consultant
Mobil +47 909 67 511
marin.mirose...@bouvet.no


Bouvet Norge AS
bouvet.no



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Raster Calculator Error Questions

[Nicolas Cadieux]

Thayer’s instructions look good.

Start by building query one step at a time.  You can separate the parts using 
the pipe sign ||.  Then, change the || for the operators OR. That would help 
you trouble shoot the operation.

 I think he is right.  The problem is likely the space between <=.

Nicolas Cadieux
https://gitlab.com/njacadieux

> Le 13 févr. 2021 à 10:57, Thayer Young  a écrit :
> 
> 
> Hi Wanda,  
> 
> Please try removing the spaces between the operators, the tool should not run 
> with those spaces: 
> they should be: <= and >= not < = and > = 
> 
> Also make sure that the name of the raster layer is EXACTLY the same as what 
> you have in your Layers panel (what the ESRI work calls Table of Contents). 
> The double quotes around the name are there just in case you have a space in 
> the name of the raster Layer. You can safely remove them if there are no 
> spaces. The parenthesis are also not necessary, because of the order of 
> operations (the same as in basic algebra). The <= and >= will calculate 
> before the OR, so there is no need for parenthesis. You would only need 
> parenthesis if the expression were more complicated.
> The following should work equally well:
> 
> Aspect@1<=90 OR Aspect@1>=270 
> Aspect@1 <= 90 OR Aspect@1 >= 270 
> "Aspect@1" <= 90 OR "Aspect@1" >= 270 
> ("Aspect@1" <= 90) OR ("Aspect@1" >= 270)
> 
> But if your layer is named "Aspect" but you enter "aspect", the raster 
> calculator will say the expression is valid but then show a red banner error 
> after it is run.
> This is because the expression looks fine to the raster calculator tool, but 
> it does not check for the existence of the layer until you press OK. In this 
> case it can not find a layer "aspect" because the layer is named "Aspect".
> 
> I have tried reproducing your problem using the OSGeo4W Network Installer 
> QGIS 10.10 without GRASS, but I am not able to. If the recommendations above 
> are not helpful, you may need to give more specifics about the errors you are 
> seeing and which installation you are using. I hope this helps :-)
> 
> -Thayer
> 
> P.S. I did have a problem with the extent not being set correctly when I had 
> more than one DEM. Everything ran without errors, but the result was empty, 
> except for a thin band where the two DEMs overlapped. You may need to be 
> careful to set this to the correct extent, so click on your Aspect layer and 
> then Selected Layer Extent.
> 
> 
> 
> ==
> Date: Fri, 12 Feb 2021 14:12:49 -0500
> From: Wanda Norman 
> To: Nicolas Cadieux 
> Cc: qgis-user 
> Subject: Re: [Qgis-user] Raster Calculator Error Questions
> Message-ID:
> 
> Content-Type: text/plain; charset="utf-8"
> 
> Thanks Nicolas for the quick response.  But I am still having issues.
> 
> I did upgrade to the 3.16 version and I am still unable to write the
> formula.  I tried:  ( "aspect@1" < = 90) OR ( "aspect@1" > = 270) - I get
> Expression is not valid. As soon as I put anything other than "aspect@1" I
> get a message that the expression is not valid.
> 
> This is the first time using the raster calculator and it looks as if I
> can't move forward with the lesson without this step.
> 
> Any other suggestions?
> 
> Thanks for your help!
> Wanda
> 
> 
> 
> On Fri, Feb 12, 2021 at 10:08 AM Nicolas Cadieux <
> njacadieux.git...@gmail.com> wrote:
> 
> > Hi,
> > I have not used the raster calculator in a while but I am not sure about
> > you use of the \.
> > Examples in the user manual (
> > https://docs.qgis.org/3.16/en/docs/user_manual/working_with_raster/raster_analysis.html#raster-calculator)
> > use this as examples.
> >
> > ("elevation@1" < 50) * 1 + ("elevation@1" >= 50) * 2
> >
> >
> > I would try (expression 1) OR (expression 2).  Layers names must be placed
> > between quotes ??.
> >
> > You could also update your QGIS version to 3.16.
> >
> > Nicolas Cadieux
> > https://gitlab.com/njacadieux
> >
> > Le 12 f?vr. 2021 ? 09:09, Wanda Norman  a
> > ?crit :
> >
> > ?
> >
> > Greetings friends:
> >
> >
> >
> > I am working on lesson 7.3.5 in the User Guide / Manual (QGIS 3.10) ?
> > Following along: Using the Raster Calculator.
> >
> >
> >
> > I am having difficulty with the calculation formula as indicated below:
> >
> >
> >
> > The manual states this formula should be used:
> >
> >Aspect@1 <=90 OR Aspect@1 >= 270
> >
> > Which I am assuming is incorrect because a) I get an error when I run it;
> > and b) when I set the parameters using the expression operators the formula
> > looks like this:
> >
> >?Aspect@1? <=90 OR ?Aspect@1? >=270
> >
> > However, I still get the error:
> >
> > Error parsing formula
> >
> > Execution failed after 0.02 seconds
> >
> >
> >
> > With some help ? I then tried this formula
> >
> > \?Aspect@1?\ <=90 OR \?Aspect@1?\ >=270
> >
> > Which worked for this assignment.
> >
> >
> >
> > However, moving on to lesson 7.3.6 ? More criteria: which takes me to
> > 

Re: [Qgis-user] distance between rectangle polygon in Qgis

[Nicolas Cadieux]

Hi,

I think you will need to delete duplicate nodes, then export the polygon nodes 
(vertices) to a new point layer.  Then, I would apply a distance matrix. Write 
back if you want more details.  This is for the distances between the nodes 
within a polygon right?

Nicolas Cadieux
https://gitlab.com/njacadieux

> Le 15 févr. 2021 à 12:35, Marin Mirosevic  a écrit 
> :
> 
> 
> Hello,
>  
> Is there a way to calculate distance between points of the polygon ?
>  
> I tried to find in “filed calculator “ under geometry but I found just 
> $perimeter and that is whole bounding line of the polygon.
>  
>  
>  
> With regards/ Vennlig hilsen
>  
>  
> Marin Mirosevic
> Consultant
> Mobil +47 909 67 511
> marin.mirose...@bouvet.no
>  
>  
> Bouvet Norge AS
> bouvet.no
>  
>  
>  
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Inserting a Simple Straight Line

[Jon Fox]

OK, thank you Andrea and Nicolas for your help.

 

Regards,

Jon

 

 

From: Qgis-user  On Behalf Of Nicolas Cadieux
Sent: Monday, February 15, 2021 3:18 PM
To: Andrea Giudiceandrea 
Cc: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] Inserting a Simple Straight Line

 

Hi,

 

You also need to make sure that the layer is a line layer, not a polygon or 
point layer.  First, select the line layer, place it in edit mode then follow 
the instructions below.

Nicolas Cadieux

https://gitlab.com/njacadieux





Le 15 févr. 2021 à 15:08, Andrea Giudiceandrea mailto:andreaer...@libero.it> > a écrit :

Jon Fox wrote



I tried to insert a straight line by using

various combinations of right- or left-clicking, and by hitting the

"enter"

key, but the line keeps continuing on as if I can only make a polyline. 


Hi Jon,
if I understand correctly your request, you just need to follow the rule for
drawing lines in QGIS:

- "left click" for the first (initial) point of the segment
- "left click" for the second (final) point of the segment
- "right click" to terminate the drawing of the line.

Regards.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org  
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Inserting a Simple Straight Line

[Nicolas Cadieux]

Hi,

You also need to make sure that the layer is a line layer, not a polygon or 
point layer.  First, select the line layer, place it in edit mode then follow 
the instructions below.

Nicolas Cadieux
https://gitlab.com/njacadieux

> Le 15 févr. 2021 à 15:08, Andrea Giudiceandrea  a 
> écrit :
> 
> Jon Fox wrote
>> I tried to insert a straight line by using
>> various combinations of right- or left-clicking, and by hitting the
>> "enter"
>> key, but the line keeps continuing on as if I can only make a polyline. 
> 
> Hi Jon,
> if I understand correctly your request, you just need to follow the rule for
> drawing lines in QGIS:
> 
> - "left click" for the first (initial) point of the segment
> - "left click" for the second (final) point of the segment
> - "right click" to terminate the drawing of the line.
> 
> Regards.
> 
> Andrea
> 
> 
> 
> --
> Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Inserting a Simple Straight Line

[Jon Fox]

Hello

 

I am a new GIS user learning QGIS version 3.16.1-Hannover.  I am trying to
insert a simple (straight) line using the "add node item" button per the
QGIS training manual Section 4.2.2.  The only drop-down options for this
button are polyline and polygon.  I tried to insert a straight line by using
various combinations of right- or left-clicking, and by hitting the "enter"
key, but the line keeps continuing on as if I can only make a polyline.  How
does one create a simple straight line in QGIS?  Any method will be
appreciated.

 

Thank you.

 

Regards,

Jon

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] Traduzione QGIS 3

[Andrea Giudiceandrea]

Stefano Campus wrote
> a questo punto facciamo una sessione di PR?
> posso fare un elenco e facciamo una cosa unica?

Ciao Stefano,
non so a cosa ti riferisci con "facciamo una sessione di PR".
Comunque, se fai un elenco dovresti comunicarlo a chi si occupa
materialmente di:
- upload su Transifex delle (nuove) stringhe in inglese, presenti nel codice
sorgente di QGIS, da tradurre

- download delle traduzioni e inserimento nella release (questo mi pare
venga effettuato automanticamente al momento all'atto della creazione della
nuova release, almeno per Winodws/OSGeo4W).

A presto.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] Traduzione QGIS 3

[Andrea Giudiceandrea]

Stefano Campus wrote
> ciao a tutti,
> abbiamo terminato la traduzione di tutt'e tre le versioni di QGIS.
> siamo al 100% di LTR, stabile e master!

Salve a tutti,
segnalo che ieri ho effettuato la modifica di una stringa nel codice
sorgente per correggere un errore nelle informazioni testuali visualizzate
nella finestra del tool di misurazione delle distanze (Measure Line tool).

In particolare nelle frasi:
"Cartesian calculation selected, so distance is calculated using Cartesian
calculations."
e
"No map projection set, so distance is calculated using Cartesian
calculations."

la parola "area" è stata sostituita con "distance", trattandosi della misura
di distanza e non di area.

Attualmente le due nuove frasi, corrette, non sono presenti in Transifex.

Non so se e quando tali stringhe verranno aggiornate su Transifex (né se ce
ne siano altre modificate e non ancora aggiornate o se ci sia in modo per
scoprirlo) e sarà possibile inserire la relativa traduzione.

Comunque se non verranno aggiornate su Transifex prima del prossimo rilascio
di QGIS e non sarà quindi possibile tradurle, queste frasi risulteranno in
inglese anche avendo selezionato la lingua italiana per l'interfaccia.

A presto.

Andrea



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] Traduzione QGIS 3

[Stefano Campus]

ciao andrea, ho notato moltissime parole in inglese che per problemi di
coordinamento con Tx sono rimaste in inglese e risultano tradotte.
a questo punto facciamo una sessione di PR?
posso fare un elenco e facciamo una cosa unica?
s.

Il giorno lun 15 feb 2021 alle ore 09:03 Andrea Giudiceandrea <
andreaer...@libero.it> ha scritto:

> Stefano Campus wrote
> > ciao a tutti,
> > abbiamo terminato la traduzione di tutt'e tre le versioni di QGIS.
> > siamo al 100% di LTR, stabile e master!
>
> Salve a tutti,
> segnalo che ieri ho effettuato la modifica di una stringa nel codice
> sorgente per correggere un errore nelle informazioni testuali visualizzate
> nella finestra del tool di misurazione delle distanze (Measure Line tool).
>
> In particolare nelle frasi:
> "Cartesian calculation selected, so distance is calculated using Cartesian
> calculations."
> e
> "No map projection set, so distance is calculated using Cartesian
> calculations."
>
> la parola "area" è stata sostituita con "distance", trattandosi della
> misura
> di distanza e non di area.
>
> Attualmente le due nuove frasi, corrette, non sono presenti in Transifex.
>
> Non so se e quando tali stringhe verranno aggiornate su Transifex (né se ce
> ne siano altre modificate e non ancora aggiornate o se ci sia in modo per
> scoprirlo) e sarà possibile inserire la relativa traduzione.
>
> Comunque se non verranno aggiornate su Transifex prima del prossimo
> rilascio
> di QGIS e non sarà quindi possibile tradurle, queste frasi risulteranno in
> inglese anche avendo selezionato la lingua italiana per l'interfaccia.
>
> A presto.
>
> Andrea
>
>
>
> --
> Sent from:
> http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
> ___
> QGIS-it-user mailing list
> QGIS-it-user@lists.osgeo.org
> https://lists.osgeo.org/mailman/listinfo/qgis-it-user
>
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] pan and zoom during temporal animation

[Richard Duivenvoorde]

On 2/14/21 9:04 PM, Eric Sorensen wrote:
> Is it possible to control pan and zoom of a view during a temporal animation?

Nope, for what I know, the only changing dimension is time.

> If so, is there a “how to” out on the web you could point me to?

Don't think so.

I think this would need some 'playbook' in which at certain times QGIS changes 
it's extent...
In the end not so difficult, but to create the playbook would need some gui.

Maybe you can script it yourself though.

The TemporalNavigationController you can call from QGIS, so you can 
'step,step,step,change-extent,step,step' etc...

I wrote some code on how to code on this, but am not able to get it through CI:
https://github.com/qgis/QGIS-Documentation/pull/5521
maybe you can use that.

Regards,

Richard Duivenvoorde
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user