Re: [qmailtoaster] Clamd and spamassassin-toaster can we stop these
To disable clamd and spamd permanently see the archive and look for "disable antispam and av". Here a shot summary: copy paste this script dont forget to chmod +x #!/bin/bash echo "Stopping spamd" svc -d /var/qmail/supervise/spamd /var/qmail/supervise/spamd/log echo "Stopping clamd" svc -d /var/qmail/supervise/clamd /var/qmail/supervise/clamd/log sleep 2 echo svstat /var/qmail/supervise/spamd svstat /var/qmail/supervise/spamd/log echo svstat /var/qmail/supervise/clamd svstat /var/qmail/supervise/clamd/log You will need to start the script after every start of the server. Regards, Marco Volkert Marco Volkert --- PROMAN Gesellschaft fr Projektmanagement mbH E-Mail:[EMAIL PROTECTED] Website:http://www.proman-gmbh.de --- senthil vel schrieb: Thanks Eric, after editing the /var/qmail/control/simcontrol as follows, :clam=no,spam=no,spam_hits=12,attach=.mp3:.src:.bat:.pif The mails are going out without any problem. I checked both from webinterface and outlook. But the server load is load average: 1.01, 1.03, 0.85 Cpu(s): 99.3% us, 0.3% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.3% hi, 0.0% si Mem:514400k total, 285764k used, 228636k free,11944k buffers Swap: 779144k total,0k used, 779144k free,99076k cached For an uptime 'up 26 min' PID USER PR NI VIRTRES SHR S %CPU %MEMTIME+ COMMAND 2576 clamav25 0 51748 45m 1268 R 99.9 9.0 2 6:17.64 clamd Will it cause some problem in long run? Thanks and Regards, S.Senthilvel, On Sat, Aug 9, 2008 at 8:38 PM, senthil vel [EMAIL PROTECTED] wrote: The big problem is when we are sending mail through the webinter face, (nuts mail), It is telling that Requested action aborted: error in processing Server replied: 451 mail server temporarily rejected message (#4.3.0) Is the problem is with clam and spam or something else...? Thanks in advance, S.Senthilvel, On Sat, Aug 9, 2008 at 8:33 PM, Eric Shubert [EMAIL PROTECTED] wrote: senthil vel wrote: Dear List, I am having a server in which Qmtiso 1.4.0 is installed. In this version of iso, the clamd and spamassassin-toaster are out dated. I am having a Spamtitan server which filters all mails to my qmail server. So i dont need the clamd and spamassassin-toaster to filter my mails. Is there any way to stop these two. Because clamd is taking 100% of cpu. Some times server is not accepting tha mails to send. But the ports 587 and 110 are open. I am attaching the setup of the servers with this mail. Thanks and Regards, S.Senthilvel, Modify settings in /var/qmail/control/simcontrol appropriately (change "yes" to "no"), then run # qmailctl cdb You might need to kill a clamd process that doesn't terminate. I'm not sure about that. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Clamd and spamassassin-toaster can we stop these
Thanks a ton Marco, now i can understand the things a little bit clear Thanks and Regards, S.Senthilvel, On Mon, Aug 11, 2008 at 11:38 AM, Marco Volkert [EMAIL PROTECTED] wrote: To disable clamd and spamd permanently see the archive and look for disable antispam and av. Here a shot summary: copy paste this script dont forget to chmod +x #!/bin/bash echo Stopping spamd svc -d /var/qmail/supervise/spamd /var/qmail/supervise/spamd/log echo Stopping clamd svc -d /var/qmail/supervise/clamd /var/qmail/supervise/clamd/log sleep 2 echo svstat /var/qmail/supervise/spamd svstat /var/qmail/supervise/spamd/log echo svstat /var/qmail/supervise/clamd svstat /var/qmail/supervise/clamd/log You will need to start the script after every start of the server. Regards, Marco Volkert --- PROMAN Gesellschaft für Projektmanagement mbH E-Mail: [EMAIL PROTECTED] Website: http://www.proman-gmbh.de --- senthil vel schrieb: Thanks Eric, after editing the /var/qmail/control/simcontrol as follows, :clam=no,spam=no,spam_hits=12,attach=.mp3:.src:.bat:.pif The mails are going out without any problem. I checked both from webinterface and outlook. But the server load is load average: 1.01, 1.03, 0.85 Cpu(s): 99.3% us, 0.3% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.3% hi, 0.0% si Mem:514400k total, 285764k used, 228636k free,11944k buffers Swap: 779144k total,0k used, 779144k free,99076k cached For an uptime 'up 26 min' PID USER PR NI VIRTRES SHR S %CPU %MEMTIME+ COMMAND 2576 clamav25 0 51748 45m 1268 R 99.9 9.0 2 6:17.64 clamd Will it cause some problem in long run? Thanks and Regards, S.Senthilvel, On Sat, Aug 9, 2008 at 8:38 PM, senthil vel [EMAIL PROTECTED] wrote: The big problem is when we are sending mail through the webinter face, (nuts mail), It is telling that Requested action aborted: error in processing Server replied: 451 mail server temporarily rejected message (#4.3.0) Is the problem is with clam and spam or something else...? Thanks in advance, S.Senthilvel, On Sat, Aug 9, 2008 at 8:33 PM, Eric Shubert [EMAIL PROTECTED] wrote: senthil vel wrote: Dear List, I am having a server in which Qmtiso 1.4.0 is installed. In this version of iso, the clamd and spamassassin-toaster are out dated. I am having a Spamtitan server which filters all mails to my qmail server. So i dont need the clamd and spamassassin-toaster to filter my mails. Is there any way to stop these two. Because clamd is taking 100% of cpu. Some times server is not accepting tha mails to send. But the ports 587 and 110 are open. I am attaching the setup of the servers with this mail. Thanks and Regards, S.Senthilvel, Modify settings in /var/qmail/control/simcontrol appropriately (change yes to no), then run # qmailctl cdb You might need to kill a clamd process that doesn't terminate. I'm not sure about that. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Clamd and spamassassin-toaster can we stop these
senthil vel wrote: Dear List, I am having a server in which Qmtiso 1.4.0 is installed. In this version of iso, the clamd and spamassassin-toaster are out dated. I am having a Spamtitan server which filters all mails to my qmail server. So i dont need the clamd and spamassassin-toaster to filter my mails. Is there any way to stop these two. Because clamd is taking 100% of cpu. Some times server is not accepting tha mails to send. But the ports 587 and 110 are open. I am attaching the setup of the servers with this mail. Thanks and Regards, S.Senthilvel, Modify settings in /var/qmail/control/simcontrol appropriately (change yes to no), then run # qmailctl cdb You might need to kill a clamd process that doesn't terminate. I'm not sure about that. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Clamd and spamassassin-toaster can we stop these
The big problem is when we are sending mail through the webinter face, (nuts mail), It is telling that Requested action aborted: error in processing Server replied: 451 mail server temporarily rejected message (#4.3.0) Is the problem is with clam and spam or something else...? Thanks in advance, S.Senthilvel, On Sat, Aug 9, 2008 at 8:33 PM, Eric Shubert [EMAIL PROTECTED] wrote: senthil vel wrote: Dear List, I am having a server in which Qmtiso 1.4.0 is installed. In this version of iso, the clamd and spamassassin-toaster are out dated. I am having a Spamtitan server which filters all mails to my qmail server. So i dont need the clamd and spamassassin-toaster to filter my mails. Is there any way to stop these two. Because clamd is taking 100% of cpu. Some times server is not accepting tha mails to send. But the ports 587 and 110 are open. I am attaching the setup of the servers with this mail. Thanks and Regards, S.Senthilvel, Modify settings in /var/qmail/control/simcontrol appropriately (change yes to no), then run # qmailctl cdb You might need to kill a clamd process that doesn't terminate. I'm not sure about that. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Clamd and spamassassin-toaster can we stop these
The only problem per se is that your cpu is running constantly, and slowing everything down considerably. Did that clamav come back after you rebooted? If so I guess you'll need to upgrade clamav-toaster, even though you're not actually using it. I'm not sure what exactly is wrong with that version that causes clamav to eat the cpu. Upgrading is a lot simpler than trying to remove clamav entirely. senthil vel wrote: Thanks Eric, after editing the /var/qmail/control/simcontrol as follows, :clam=no,spam=no,spam_hits=12,attach=.mp3:.src:.bat:.pif The mails are going out without any problem. I checked both from webinterface and outlook. But the server load is load average: 1.01, 1.03, 0.85 Cpu(s): 99.3% us, 0.3% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.3% hi, 0.0% si Mem:514400k total, 285764k used, 228636k free,11944k buffers Swap: 779144k total,0k used, 779144k free,99076k cached For an uptime 'up 26 min' PID USER PR NI VIRTRES SHR S %CPU %MEMTIME+ COMMAND 2576 clamav25 0 51748 45m 1268 R 99.9 9.0 2 6:17.64 clamd Will it cause some problem in long run? Thanks and Regards, S.Senthilvel, On Sat, Aug 9, 2008 at 8:38 PM, senthil vel [EMAIL PROTECTED] wrote: The big problem is when we are sending mail through the webinter face, (nuts mail), It is telling that Requested action aborted: error in processing Server replied: 451 mail server temporarily rejected message (#4.3.0) Is the problem is with clam and spam or something else...? Thanks in advance, S.Senthilvel, On Sat, Aug 9, 2008 at 8:33 PM, Eric Shubert [EMAIL PROTECTED] wrote: senthil vel wrote: Dear List, I am having a server in which Qmtiso 1.4.0 is installed. In this version of iso, the clamd and spamassassin-toaster are out dated. I am having a Spamtitan server which filters all mails to my qmail server. So i dont need the clamd and spamassassin-toaster to filter my mails. Is there any way to stop these two. Because clamd is taking 100% of cpu. Some times server is not accepting tha mails to send. But the ports 587 and 110 are open. I am attaching the setup of the servers with this mail. Thanks and Regards, S.Senthilvel, Modify settings in /var/qmail/control/simcontrol appropriately (change yes to no), then run # qmailctl cdb You might need to kill a clamd process that doesn't terminate. I'm not sure about that. -- -Eric 'shubes' -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]