Re: [Quantum Owners] Re: Xtreame Front Bearings torque settings?

2017-05-04 Thread Chris Young 
oh crap - sorry thought I had made a point on that front ! whoops.  I hope
you haven't crushed them :(

any progress on the ecu?  you make it to stoneleigh?(this means it was
a year a go since my last decent drive out in it!)



On Thu, 4 May 2017 at 17:41 Alex Dalton  wrote:

> Chris
>
> Just realised that after loose front wheel being reported in my MOT I have
> probably made the same mistake re torque setting on mine!
>
> Alex
>
> On Thu, May 4, 2017 at 1:20 PM, Chris Xtreme 
> wrote:
>
>> hi
>>
>> take a look through some of the older posts in the group:
>>
>>
>> https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:relevance/quantumowners/QKTtAaa5pTg/8U7XVgK5fbsJ
>>
>>
>> https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:relevance/quantumowners/X2nYo1zYeCQ/-P56a3vPKCkJ
>>
>>
>> in short, tighten them till they start to grip, then slacken off a bit.
>> someone else did mine, but as per the first link above you do NOT tighten
>> up to any ford level, they are a different type of bearing.
>>
>> cheers Chris
>>
>>
>> On Thursday, 4 May 2017 11:43:05 UTC+1, robert greig wrote:
>>>
>>> Hello. Everyone.
>>>
>>> Got the Xtreame MOT done today and I have noisy front wheel bearings.
>>> Looking at the build manual it just says tighten and check after 20
>>> miles.
>>> As the hub is not a Ford part.
>>>
>>> I am not able to replace these my self, so what torque setting should I
>>> recommend to the garage that will do the work for me?
>>>
>>>
>>> Regards Robert Greig
>>>
>>>
>> --
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Quantum Owners Group" group.
>> To post to this group, send email to quantumowners@googlegroups.com
>> To unsubscribe from this group, send email to
>> quantumowners-unsubscr...@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/quantumowners?hl=en
>>
>> IMPORTANT NOTE: All information presented herewith is provided on an "As
>> Is" basis, without warranty or the implication thereof. Neither the Quantum
>> Owners Club nor the individuals associated with the Quantum Owners Club or
>> in the preparation of the above information shall have any liability to any
>> person or entity with respect to liability, loss, or damage caused or
>> alleged to be caused directly or indirectly by the instructions contained
>> within this or related message(s).
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Quantum Owners Group" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to quantumowners+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to quantumowners@googlegroups.com
> To unsubscribe from this group, send email to
> quantumowners-unsubscr...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).
> ---
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quantumowners+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an

Re: [Quantum Owners] Re: Xtreame Front Bearings torque settings?

2017-05-04 Thread Alex Dalton 
Chris

Just realised that after loose front wheel being reported in my MOT I have
probably made the same mistake re torque setting on mine!

Alex

On Thu, May 4, 2017 at 1:20 PM, Chris Xtreme 
wrote:

> hi
>
> take a look through some of the older posts in the group:
>
> https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:
> relevance/quantumowners/QKTtAaa5pTg/8U7XVgK5fbsJ
>
> https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:
> relevance/quantumowners/X2nYo1zYeCQ/-P56a3vPKCkJ
>
>
> in short, tighten them till they start to grip, then slacken off a bit.
> someone else did mine, but as per the first link above you do NOT tighten
> up to any ford level, they are a different type of bearing.
>
> cheers Chris
>
>
> On Thursday, 4 May 2017 11:43:05 UTC+1, robert greig wrote:
>>
>> Hello. Everyone.
>>
>> Got the Xtreame MOT done today and I have noisy front wheel bearings.
>> Looking at the build manual it just says tighten and check after 20 miles.
>> As the hub is not a Ford part.
>>
>> I am not able to replace these my self, so what torque setting should I
>> recommend to the garage that will do the work for me?
>>
>>
>> Regards Robert Greig
>>
>>
> --
> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to quantumowners@googlegroups.com
> To unsubscribe from this group, send email to quantumowners-unsubscribe@
> googlegroups.com
> For more options, visit this group at http://groups.google.com/
> group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).
> ---
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quantumowners+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Quantum Owners] Re: Xtreame Front Bearings torque settings?

2017-05-04 Thread Chris Xtreme 
hi

take a look through some of the older posts in the group:

https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:relevance/quantumowners/QKTtAaa5pTg/8U7XVgK5fbsJ

https://groups.google.com/forum/#!searchin/quantumowners/bearing|sort:relevance/quantumowners/X2nYo1zYeCQ/-P56a3vPKCkJ


in short, tighten them till they start to grip, then slacken off a bit. 
someone else did mine, but as per the first link above you do NOT tighten 
up to any ford level, they are a different type of bearing.

cheers Chris


On Thursday, 4 May 2017 11:43:05 UTC+1, robert greig wrote:
>
> Hello. Everyone.
>
> Got the Xtreame MOT done today and I have noisy front wheel bearings.
> Looking at the build manual it just says tighten and check after 20 miles.
> As the hub is not a Ford part.
>
> I am not able to replace these my self, so what torque setting should I 
> recommend to the garage that will do the work for me?
>
>
> Regards Robert Greig
>  
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Quantum Owners] Xtreame Front Bearings torque settings?

2017-05-04 Thread 'robert greig' via Quantum Owners Group 
Hello. Everyone.
Got the Xtreame MOT done today and I have noisy front wheel bearings.Looking at 
the build manual it just says tighten and check after 20 miles.As the hub is 
not a Ford part.
I am not able to replace these my self, so what torque setting should I 
recommend to the garage that will do the work for me?

Regards Robert Greig 

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [Quantum Owners] Re: Stoneleigh

2017-05-04 Thread Steve Kodź 

Mark,
That was Steve Hole from tkc Mag. It can be heard here...

http://www.bbc.co.uk/programmes/p051q4pq

Regards,
Steve
--
h4-turbo.co.uk
quantumowners.co.uk



On 4 May 2017 11:02:36 "'Mark Alford' via Quantum Owners Group" 
 wrote:



YES, THANKS TO TEAM QUANTUM for all the work over the weekend.

I counted 40 cars there Sunday; unfortunately not there Monday but
interested to know how many were there...

Did anyone listen to Radio2 Tuesday morning; Chris Evans had a slot where
he talked to a representative/ organiser ( i missed his name) from
Stoneleigh. It was a good interview and Chris now has plans to add Kit cars
to his Car Fests!!!

See you at Castle Combe or Curborough...

Cheers Mark

On Monday, May 1, 2017 at 9:35:17 PM UTC+1, Mark Cleminson wrote:


A good weekend with "little Max" at Stoneleigh. Good to catch up with
everyone over a few drinks and plenty of food. Some great immaculate and
work inprogress cars as well as tall trees, not sure about Quantum Sleeps
new resident though.
A big thanks to all who organise and help over the weekend. Hope everyone
got home incident free.

Mark



--
--
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.

To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en


IMPORTANT NOTE: All information presented herewith is provided on an "As 
Is" basis, without warranty or the implication thereof. Neither the Quantum 
Owners Club nor the individuals associated with the Quantum Owners Club or 
in the preparation of the above information shall have any liability to any 
person or entity with respect to liability, loss, or damage caused or 
alleged to be caused directly or indirectly by the instructions contained 
within this or related message(s).

---
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to quantumowners+unsubscr...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


--
--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).
--- 
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Quantum Owners] Re: Stoneleigh

2017-05-04 Thread 'Mark Alford' via Quantum Owners Group 
YES, THANKS TO TEAM QUANTUM for all the work over the weekend.

I counted 40 cars there Sunday; unfortunately not there Monday but 
interested to know how many were there...

Did anyone listen to Radio2 Tuesday morning; Chris Evans had a slot where 
he talked to a representative/ organiser ( i missed his name) from 
Stoneleigh. It was a good interview and Chris now has plans to add Kit cars 
to his Car Fests!!!

See you at Castle Combe or Curborough...

Cheers Mark

On Monday, May 1, 2017 at 9:35:17 PM UTC+1, Mark Cleminson wrote:
>
> A good weekend with "little Max" at Stoneleigh. Good to catch up with 
> everyone over a few drinks and plenty of food. Some great immaculate and 
> work inprogress cars as well as tall trees, not sure about Quantum Sleeps 
> new resident though.
> A big thanks to all who organise and help over the weekend. Hope everyone 
> got home incident free. 
>
> Mark
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [Quantum Owners] Re: Electric Q

2017-05-04 Thread 'Michael Hughes' via Quantum Owners Group 
Some might prefer the birds to sigh.



-Original Message-
From: Rolf 
To: Quantum Owners Group 
Sent: Wed, 3 May 2017 20:53
Subject: Re: [Quantum Owners] Re: Electric Q

Anthony is doing a wonderfull job on this interesting project, Matthew.
I was lucky to see the car before Stoneleigh, albeit very shortly.
There must be around 10miles of copperwiring gone into that, but not all for 
the conversion I haste to say.
And is does make sense: an electric convertible and enjoy the birds singing.
Worth waiting for.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.