Re: [qubes-users] Anyone tried Qubes on HP Paviliion x360 14cd
The mail got sent halfway mistakenly. I installed the rc2 version on HP Pavillion x360. It only got installed in legacy mode. Doesn’t boot in UEFI or with secure boot. Also I have moved network-manager to sys-net. I can attach the USB-ethernet adapter to sys-net, but I am not sure how to get ethernet working in sys-net after that. I tried the method given in documentation about PCI devices, but it says sys-usb doesn’t expose the device (which readlink says is for ethernet). Regards, Anil > On 19-Nov-2019, at 9:58 PM, Anil Eklavya wrote: > > I installed the rc2 version on HP Pavillion x360. It only got installed in > legacy mode. Doesn’t boot in UEFI or with secure boot. > > Also I have moved network-manager to sys-net. I can attach the USB-ethernet > adapter to sys-net, but > > Regards, -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/4FB27F9D-B45F-4E23-A714-D72C61701708%40gmail.com.
Re: [qubes-users] Anyone tried Qubes on HP Paviliion x360 14cd
I installed the rc2 version on HP Pavillion x360. It only got installed in legacy mode. Doesn’t boot in UEFI or with secure boot. Also I have moved network-manager to sys-net. I can attach the USB-ethernet adapter to sys-net, but Regards, Anil > On 20-Oct-2019, at 4:06 AM, Anil Eklavya wrote: > > I tried again and it did get installed. I have just installed it and so far > it’s working fine. > > There was probably a mistake in the dd command. > > Right now I am using the stable version, as this model or anything similar > was not listed in the HCL list. I have separate sys-usb and sys-net. > > It would have been good if Coreboot or Heads Linux was available for this > model. > > Can you point me to directions to change the whole disk passphrase. I had > done it earlier, but I seem to have forgotten the exact way. Mainly, I am not > sure whether I have to use cryptsetup on the disk device or the boot > partition device. I have not played around with command line encryption much. > > Regards, > > Anil > >> On 17-Oct-2019, at 11:21 PM, awokd wrote: >> >> Anil Eklavya: >>> I am trying to install Qubes on HP Pavillion x360 14 inch (cd0056TX). I >>> have tried both in UEFI mode and legacy boot mode. It either doesn’t >>> recognise the bootable drive (says not bootable drive), or it stops at one >>> point during booting from the installation pen drive and just stops at one >>> point and doesn’t proceed further, no matter how long I wait. >>> >>> Has anyone tried on this model and can anyone any hint as to what could be >>> the problem. >>> >>> I tried both with MBR and GPT for the pen drive. I had searched for the >>> line at which stopping, but did not find any solution that works. >> >> Make sure to use dd mode to create the install pen drive. Try UEFI >> first, and refer to https://www.qubes-os.org/doc/uefi-troubleshooting/ >> if you still have trouble. If that doesn't help, update here! >> >> -- >> - don't top post >> Mailing list etiquette: >> - trim quoted reply to only relevant portions >> - when possible, copy and paste text instead of screenshots -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/C519E4ED-8DB1-434B-8F93-861E449803CE%40gmail.com.
Re: [qubes-users] Bug Thunderbird: kills addons after last update
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 scurge1tl: > > > scurge1tl: >> Today's upgrade of Thunderbird to 68.2.2 (64-bit) killed all >> addons in Whonix-ws-15 AppVMs. >> >> Enigmail seems to be already running, but Torbirdy and Qubes >> addon for Attachments opening in a DispVM disappeared. >> >> > > Update. Newly created anon-whonix through sudo qubesctl state.sls > qvm.anon-whonix doesnt include any addons by default on first > launch. No Torbirdy, Qubes-attachments nor Enigmail. > > Manual install is possible only for Enigmail, but Thunderbirds' > Enigmail somehow cant work with my backend gpg-split. It launches > work-gpg, asks me for the confirmation, but than cant decrypt or > even load emails. > > But qubes-gpg-client can work with my gpg backend easily, without > any issue. > Is there anything new in this regard? -BEGIN PGP SIGNATURE- iQKTBAEBCgB9FiEExlmPb5HoPUTt+CQT44JZDAWK6UwFAl3UCdZfFIAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEM2 NTk4RjZGOTFFODNENDRFREY4MjQxM0UzODI1OTBDMDU4QUU5NEMACgkQ44JZDAWK 6UyyRg//ZC9LLtFZsFdFQ31lcJk/576fvaVsaca5goQtk1DeTTfYb5I9l4avFZTS xVZJZV1d29X18vPyf0rjXuzoISMR7sjq7VMN0VEWE8yG4qNdbDKMevo3mXtItpEX M7xol7aW3dJMRtGfvci3CeVCiqVjjJXZ4wWHFSX6JdBgY/QgA7F+pdhdSeCcEMQZ F5jx3s5YXvTXd5+0dhb78Im4DSugAT4udjjkhcYxdnI8nJnNbrxJEVh39UbLAi9X U21mKj4RkpYoCBrzeFWcpeF2RNWk2acq8sEtjbb7HBk8RE69K/0N1Zr7Yf3SZHY8 NWzcgsxz8kkRa7cwmGkMp9NdKI/RigotH4zHMNiFgg4shLW2VplufhcdEhem4lCo xmDcjBZlLAtutR1betrHQl790QNv8jZJKXwXden436/I2IFE0JVU+tiwkcCHE6Jy CyynFlZrDqmBdU4512/L1yNyuAajSgjSTuybszAjZCV1QOLSwaZlaHeZy+x78tE1 VYwWUPVUGg8J7TSc6nKzt1lnv/b6dAFFrXpazWtJZnQiJ/HiBn3dGJEXXqtlYaAL VLyn0mrJLfY6y7Z+VwOprztJ5CNgKu+Khg4KeEFGL34K/i/o+OC85OvrSxWFqSS/ YQprW7T6GlCu4EBaACF2CHptbYQqSAUSOTsO1vnhBBMrSlIOP3c= =uMgo -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1ae50d81-ba97-b0c8-ea22-3b5054b436f8%40cock.li. 0xC1F4E83AF470A4ED.asc Description: application/pgp-keys
Re: [qubes-users] Looking to change value of dom0_mem=max, tried finding xen-cmdline but no luck
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2019-11-18 9:41 PM, Sphere wrote: > https://discussions.citrix.com/topic/354913-error-increasing-dom0-memory-in-61/ > > So I am looking to reduce the max set on dom0_mem because a > considerable amount of ram is being wasted (roughly 1500 MB) and I > want to use it on my RAM heavy appvms instead > > I've been searching all over the place for xen configuration stuff > but I haven't gotten much luck finding anything that has the > parameters that define the values in "xen_commandline" that is > shown whenever one types xl info > > I've tried doing things like "xl mem-set Domain-0 2048M" but it > reverts back as soon as I start a new app vm... > > Anybody know the proper way to do this? > Are you sure that there's actually a problem that needs to be solved here? A large amount of memory allocated to dom0 does not necessarily indicate a problem: https://www.qubes-os.org/doc/qmemman/ - -- Andrew David Wong (Axon) Community Manager, Qubes OS https://www.qubes-os.org -BEGIN PGP SIGNATURE- iQIzBAEBCgAdFiEEZQ7rCYX0j3henGH1203TvDlQMDAFAl3Trc8ACgkQ203TvDlQ MDDFZg//SEbcV5taSEX4ft/w2UHs/cI6ZC2Dzc5GrTEF6gcvXz+WGwHcbjpTkuDN ZF/KR9cDA8a5Sf/CsBTueHv94O9AOCEA6ZPPKkhKIJXQWCEBR/y5NAmU8bJzbweN d9FA2myxz+k1UXQ6T50qNCilWrZoo2jTSJo3Xt2DiBJOjc0yp+86sThA4kgAkk3L CA5bgSNfQQPAmQdWIUuu/Z1OWk2U/O1FQDaLP8bdHKNiaQA+hHyq6bhX2s5exbi8 kP7qVGhS3TfPyn71Gz9sU5LSD7orPmNG5ilb77IdZidJU2UjiUWczRFSfJRe3tNG vsbABDXRrRmxSn1nBVy08iMg7jx5pEcG1t8rCeAG8/82EO78tSpRlHqj6IzfC/qf fhGxlUSSOoh5++fryhuQeL+h59n42uTZ4cPmj+aeMv0nLodHuRnoGXnAfdbRmpfo psmE+38nhlqhq9wTEcbmU8jDqhF/pqEm/Fj+QAhC1DCHk+1XECdI9E0nhcAXGl7l C1J0y3F2Jau8fK9+L9bXKqzLYwyqhvRoe08jeJCxC1izlk9KQnc6Xc6+f+l6fZgw ahHba1XynL3VswYH59EvwqMtvspGbYGFYvpW0Hy/WHQJGlH1AAHQaBNOo5wQLbzS bsVjV41UfwAfqSrpcj6fQdC4iY1nARD7hm+hR2BzFlCEIo+teeA= =MIyF -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/58d581fa-da3f-94a7-46bb-46fa4ce3fddf%40qubes-os.org.
