RE: [RBASE-L] - Moving RBASE XE License from One computer to Another Computer
Razzak, Thanks!! - John _ John Murnane Arizona Board of Regents 2020 N Central Ave., Ste. 230 Phoenix, AZ 85004 work: 602-496-1137 mobile: 480-543-9582 -Original Message- From: rbase-l@googlegroups.com On Behalf Of A. Razzak Memon Sent: Monday, September 24, 2018 4:47 PM To: rbase-l@googlegroups.com Subject: Re: [RBASE-L] - Moving RBASE XE License from One computer to Another Computer John, That pretty much sums it up. Feel free to reach out to the support team at mailto:supp...@rbase.com if you need further assistance. Very Best R:egards, Razzak At 07:14 PM 9/24/2018, John Murnane wrote: >We are using R:BASE X Enterprise for Windows (version 10.0.4.10913) - >Single Seat License > >Are these the steps needed to move an R:BASE license from one computer >to a new computer. >1. Deactivate the license on the old computer >2. Uninstall R:Base on old computer >3. Install R:BASE on the new computer >4. Re Activate – The usiing the License Key and Activation Key > >Am I missing anything? > >- John -- For group guidelines, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rbase.com_support_usersgroup-5Fguidelines.php=DwIFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=X5nK4ym5xfDl7h9Zf-ReuB393vs0QyneKPFmHvyGZks=Cczde_tberxgQ8RSROuu_jaae_bBVB-o2k7s6a-_7go= --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwIFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=X5nK4ym5xfDl7h9Zf-ReuB393vs0QyneKPFmHvyGZks=w3-sIfr-eCRSlSnzG9FLB3nOzFGGytomx27MF5R32GM=. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[RBASE-L] - Moving RBASE XE License from One computer to Another Computer
We are using R:BASE X Enterprise for Windows (version 10.0.4.10913) - Single Seat License Are these the steps needed to move an R:BASE license from one computer to a new computer. 1. Deactivate the license on the old computer 2. Uninstall R:Base on old computer 3. Install R:BASE on the new computer 4. Re Activate – The using the License Key and Activation Key Am I missing anything? - John _ John Murnane Arizona Board of Regents 2020 N Central Ave., Ste. 230 Phoenix, AZ 85004 work: 602-496-1137 mobile: 480-543-9582 -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[RBASE-L] - OBDC driver issue with latest version of R:BASE X Enterprise
Hi All, After updating to the latest R:BASE X Enterprise (ver. 10.0.3.20320), one of our applications that inserts data into a R:BASE table using the ODBC driver is failing with the following error message: $exception {"ERROR [21S01] [RBTI][R:BASE 10.0 ODBC ODBC Driver][WICHE Applicants]-ERROR- Incorrect number of values for this table ( 118)"} System.Data.Odbc.OdbcException This program is designed to insert an incomplete records into the R:BASE table (with the expectation that fields not specified will be filled with null or default value). I confirmed that this program works correctly for all previous version of R:BASE (last one was 10.0.3.20116). Did something change with the newest version? OBDC Driver: R:BASE X Enterprise Database Driver 10.00.02.20320 - John _ John Murnane UTO Computing Support Arizona State University work: 602-496-1137 mobile: 480-543-9582 -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[RBASE-L] - EnhancedDBGrid control
Hi All: Is there a way to apply a display format to a column in an EnhancedDBGrid control? I have a Double column that I’d like to display with “$#,0.00;($#,0.00)”. - John _ John Murnane -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
RE: [RBASE-L] - Error using View to create new table
Karen, That fixed my issue. Thank you so much! I guess I need more RBASE training– I’ve never seen SQL syntax like this. My query looks like this: (AccountNum,datepd,depnum,checknum,amtpd,interest,principal,nsfflag) SELECT T1.AccountNum AS AccountNum,T1.datepd AS datepd,T1.depnum as depnum,T1.checknum as checknum,SUM (T1.amtpd) AS amtpd,SUM ( T1.interest ) AS interest,SUM ( T1.principl ) as principl,T1.nsfflag AS nsfflag FROM ActiveReceipts T1 ORDER BY T1.AccountNum, T1.datepd GROUP BY T1.AccountNum, T1.datepd, T1.checknum, T1.depnum, T1.nsfflag Really like the help being provided by this list!! - John _ John Murnane UTO Computing Support Arizona State University work: 602-496-1137 mobile: 480-543-9582 From: karentellef via RBASE-L [mailto:rbase-l@googlegroups.com] Sent: Tuesday, January 16, 2018 12:19 PM To: rbase-l@googlegroups.com Subject: Re: [RBASE-L] - Error using View to create new table The column "amtpd" isn't by any chance a computed column in the ActiveReceipts table, is it? If so, then change your "AS" alias Karen -Original Message- From: John Murnane <john.murn...@asu.edu<mailto:john.murn...@asu.edu>> To: rbase-l <rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com>> Sent: Tue, Jan 16, 2018 1:06 pm Subject: [RBASE-L] - Error using View to create new table Hi All: I’m using R:BASE X Enterprise v 10.03.20116. I am running into an issue with a an RBASE view. I can successfully run a browse query, see image below, but get a “Illegal column name (2056)” when I attempt to save the query results to a new table. Any ideas as to what I’m missing? Thanks in advance!! Query : SELECT T1.AccountNum AS AccountNum,T1.datepd AS datepd,T1.depnum as depnum,T1.checknum as checknum, SUM (T1.amtpd) AS amtpd, SUM ( T1.interest ) AS interest,SUM ( T1.principl ) as principl,T1.nsfflag AS nsfflag FROM ActiveReceipts T1 ORDER BY T1.AccountNum, T1.datepd GROUP BY T1.AccountNum, T1.datepd, T1.checknum, T1.depnum, T1.nsfflag Browse Query Result: [cid:image001.jpg@01D38ED2.3A144680] Error when attempting to “Save Query as Table”: [cid:image002.png@01D38ED2.3A144680] Detail: The column name you specified is unacceptable. A column name must be from one to eighteen characters long. It must start with a letter and cannot contain blanks. ActiveReceipts definition: lastname TEXT (30) firstnm TEXT (16) AccountNum "NUMERIC (8,0)" pymtdate DATE depnum TEXT (5) checknum TEXT (5) datepd DATE amtpd CURRENCY nsfflag TEXT (1) interest CURRENCY principl CURRENCY field TEXT (24) pymtnum INTEGER acrdpd CURRENCY - John _ John Murnane UTO Computing Support Arizona State University work: 602-496-1137 mobile: 480-543-9582 -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rbase.com_support_usersgroup-5Fguidelines.php=DwMFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=ZEZaa-skfkF-L5JviLr4O4tAnPjHR22F9XzC7yCRh4Y=yalUhvV6pyVbL0xUDFaP9zKe_9BX6uqi1tObexhZSko=> --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=ZEZaa-skfkF-L5JviLr4O4tAnPjHR22F9XzC7yCRh4Y=Gt-frJtCp9IAYwj6jzDyAYlOIKKmJLMnG4ZyE6ovwY4=>. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rbase.com_support_usersgroup-5Fguidelines.php=DwMFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=ZEZaa-skfkF-L5JviLr4O4tAnPjHR22F9XzC7yCRh4Y=yalUhvV6pyVbL0xUDFaP9zKe_9BX6uqi1tObexhZSko=> --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=l45AxH-kUV29SRQusp9vYR0n1GycN4_2jInuKy6zbqQ=vpk0PyJh43xdqA62BEUOuvjPHYG0pBgqw__VMfJafi0=ZEZaa-skfkF-L5JviLr4O4tAnPjHR22F9XzC7yCRh4Y=Gt-frJtCp9IAYwj6jzDyAYlOIKKmJLMnG4ZyE6ovwY4=>. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php -
[RBASE-L] - Error using View to create new table
Hi All: I'm using R:BASE X Enterprise v 10.03.20116. I am running into an issue with a an RBASE view. I can successfully run a browse query, see image below, but get a "Illegal column name (2056)" when I attempt to save the query results to a new table. Any ideas as to what I'm missing? Thanks in advance!! Query : SELECT T1.AccountNum AS AccountNum,T1.datepd AS datepd,T1.depnum as depnum,T1.checknum as checknum, SUM (T1.amtpd) AS amtpd, SUM ( T1.interest ) AS interest,SUM ( T1.principl ) as principl,T1.nsfflag AS nsfflag FROM ActiveReceipts T1 ORDER BY T1.AccountNum, T1.datepd GROUP BY T1.AccountNum, T1.datepd, T1.checknum, T1.depnum, T1.nsfflag Browse Query Result: [cid:image004.jpg@01D38EC2.6B1208E0] Error when attempting to "Save Query as Table": [cid:image002.png@01D38EC1.5C2D2090] Detail: The column name you specified is unacceptable. A column name must be from one to eighteen characters long. It must start with a letter and cannot contain blanks. ActiveReceipts definition: lastname TEXT (30) firstnm TEXT (16) AccountNum "NUMERIC (8,0)" pymtdate DATE depnum TEXT (5) checknum TEXT (5) datepd DATE amtpd CURRENCY nsfflag TEXT (1) interest CURRENCY principl CURRENCY field TEXT (24) pymtnum INTEGER acrdpd CURRENCY - John _ John Murnane UTO Computing Support Arizona State University work: 602-496-1137 mobile: 480-543-9582 -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
RE: [RBASE-L] - Form Design - using OnCloseDesignerEEP
Hi Buddy, OK, Thanks for the information. - John _ John Murnane From: rbase-l@googlegroups.com [mailto:rbase-l@googlegroups.com] On Behalf Of Buddy Walker Sent: Monday, June 12, 2017 5:24 PM To: rbase-l@googlegroups.com Subject: RE: [RBASE-L] - Form Design - using OnCloseDesignerEEP John You would have to put Form Width/Height IN the after start eep. The OnCloseDisigner EEP would be used for something like clearing some variables you created just so you could design and test form. Buddy From: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> [mailto:rbase-l@googlegroups.com] On Behalf Of John Murnane Sent: Monday, June 12, 2017 7:27 PM To: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> Subject: [RBASE-L] - Form Design - using OnCloseDesignerEEP I was hoping I could use the OnCloseDesignerEEP to set the desired size of a form on closing the designer. This does not seem to work. Am I missing something? [cid:image001.jpg@01D2E3A4.AEACAF20] - John _ John Murnane Arizona State University -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=AGbYxfJbXK67KfXyGqyv2Ejiz41FqQuZFk4A-1IxfAU=KR_gqMVV466XdfTuEOPqxWCALmEXow7h6eI9lKsesk0=Uh7j2v19aPzERHg1AliK4YuQKvk2xCNl53qFddQ9xbY=goeeQ_4nGOEHnMgHA2xcvZngN2EnKVNES8bse1RobbQ=>. -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=AGbYxfJbXK67KfXyGqyv2Ejiz41FqQuZFk4A-1IxfAU=KR_gqMVV466XdfTuEOPqxWCALmEXow7h6eI9lKsesk0=Uh7j2v19aPzERHg1AliK4YuQKvk2xCNl53qFddQ9xbY=goeeQ_4nGOEHnMgHA2xcvZngN2EnKVNES8bse1RobbQ=>. -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[RBASE-L] - RE: Form EEP question
Thanks Dan! I am using an enhanced DB Grid was able to apply filter with PROPERTY EnhancedDBGrid1 ‘FILTERS->COLUMN_NAME->lastname’ .newname Really appreciate the great information in this group. - John _ John Murnane Arizona State University From: rbase-l@googlegroups.com [mailto:rbase-l@googlegroups.com] On Behalf Of Dan Goldberg Sent: Wednesday, May 31, 2017 10:06 AM To: rbase-l@googlegroups.com Subject: [RBASE-L] - RE: Form EEP question Are you using an enhanced dbgrid in your form? If so, then you can turn on the filter bar to filter results. Dan Goldberg From: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> [mailto:rbase-l@googlegroups.com] On Behalf Of John Murnane Sent: Wednesday, May 31, 2017 9:56 AM To: rbase-l@googlegroups.com<mailto:rbase-l@googlegroups.com> Subject: [RBASE-L] - Form EEP question I’m learning to use custom EEPs for form design. I know that I can move through table associated with form using the NEXTROW.Is it possible to change the selection criteria for a form through an EEP? I have a button on a form for which I’ve defined an “On Click EEP”. I want to do something like this: SELECT * FROM table1 WHERE name=.newname *(selects new form data) RECALC TABLES - John _ John Murnane Arizona State University -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=AGbYxfJbXK67KfXyGqyv2Ejiz41FqQuZFk4A-1IxfAU=KR_gqMVV466XdfTuEOPqxWCALmEXow7h6eI9lKsesk0=oIydcxyoqVrSJqHtif6SoF9A_IMi6R58twgLSuxMfoo=kB5dCRSXLphlJOPAoWqUIbUN3GLQqfmJ-x0KjoqrRCo=>. -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com<mailto:rbase-l+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout<https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout=DwMFaQ=AGbYxfJbXK67KfXyGqyv2Ejiz41FqQuZFk4A-1IxfAU=KR_gqMVV466XdfTuEOPqxWCALmEXow7h6eI9lKsesk0=oIydcxyoqVrSJqHtif6SoF9A_IMi6R58twgLSuxMfoo=kB5dCRSXLphlJOPAoWqUIbUN3GLQqfmJ-x0KjoqrRCo=>. -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[RBASE-L] - Form EEP question
I'm learning to use custom EEPs for form design. I know that I can move through table associated with form using the NEXTROW.Is it possible to change the selection criteria for a form through an EEP? I have a button on a form for which I've defined an "On Click EEP". I want to do something like this: SELECT * FROM table1 WHERE name=.newname *(selects new form data) RECALC TABLES - John _ John Murnane Arizona State University -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
RE: [RBASE-L] - Issue with Trace Debugger and Watch Variables
Thanks Razzak! Your suggestion worked. I did as you suggested plus a couple of additional steps: 1. Backed-up the RBASE registry settings into a .reg file (to save all my settings to other RBASE components) 2. Ran RBGXE_Default_Settings.exe and restored default settings 3. Edited the RBASE settings .reg file to remove all settings related to the Trace 4. Applied the edited RBASE .reg file to recover my settings to other RBASE components 5. Started and tested the Watch Variable settings It worked!! I now can add and see watch variables again. I used the Compare-by-Content Tool to figure out what caused the issue (See attached). It was due to the parameters "Variable Name", "Type", "Value", and Break On" being set to zero in the registry (they hold the column size values of for the Watch Variables window) : [HKEY_CURRENT_USER\Software\R:BASE Technologies\RBGXE\Trace Window\Variables] "Variable Panel Width"=dword:050a "Variable Name"=dword: "Type"=dword: "Value"=dword: "Break On"=dword: "Variables"=hex:00,00,00,00 Resetting to initial default settings sets all of these to x4C or 76 pixels [HKEY_CURRENT_USER\Software\R:BASE Technologies\RBGXE\Trace Window\Variables] "Variable Panel Width"=dword:0661 "Variable Name"=dword:004c "Type"=dword:004c "Value"=dword:004c "Break On"=dword:004c "Variables"=hex:01,00,00,00,07,00,00,00,53,51,4c,43,4f,44,45 "Visible"=dword:0001 I have no idea why/how these parameters were corrupted, except that I encountered a fatal error running RBASE earlier in the day. Log Name: Application Source:Application Error Date: 4/20/2017 9:35:06 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: xxxad.asu.edu Description: Faulting application name: RBGXE.exe, version: 10.0.2.20411, time stamp: 0x2a425e19 Faulting module name: RBGXE.exe, version: 10.0.2.20411, time stamp: 0x2a425e19 Exception code: 0xc005 Fault offset: 0x4e30 Faulting process id: 0xea38 Faulting application start time: 0x01d2b96cee312814 Faulting application path: C:\RBTI\RBGXE\RBGXE.exe Faulting module path: C:\RBTI\RBGXE\RBGXE.exe Report Id: 4f1fa385-25e7-11e7-9908-5cf3706d9a79 Event Xml: http://schemas.microsoft.com/win/2004/08/events/event;> 1000 2 100 0x80 90484 Application x.asu.edu RBGXE.exe 10.0.2.20411 2a425e19 RBGXE.exe 10.0.2.20411 2a425e19 c005 4e30 ea38 01d2b96cee312814 C:\RBTI\RBGXE\RBGXE.exe C:\RBTI\RBGXE\RBGXE.exe 4f1fa385-25e7-11e7-9908-5cf3706d9a79 - John John Murnane Arizona Board of Regents / Arizona State University -Original Message- From: rbase-l@googlegroups.com [mailto:rbase-l@googlegroups.com] On Behalf Of A. Razzak Memon Sent: Thursday, April 20, 2017 12:33 PM To: rbase-l@googlegroups.com Subject: Re: [RBASE-L] - Issue with Trace Debugger and Watch Variables John, First, welcome to R:BASE World! I hope the information shared on this list is valuable to you and to all our new and young users who have joined since the introduction of R:BASE X and R:BASE X Enterprise (Version 10). Looking at you PDF attachment, once all variables are selected to add to Watch Variable list, they all should be listed. However, to start fresh, follow the steps below: 01. Close and Exit R:BASE X Enterprise session 02. Run the following file to restore all default R:BASE X Enterprise settings C:\RBTI\RBGXE\RBGXE_Default_Settings.exe 03. Start RBGXE and try the TRACE and see what you get Hope that helps! Feel free to reach out to me if you have any questions. Very Best R:egards, Razzak At 03:02 PM 4/20/2017, John Murnane wrote: >I'm new to this list and appreciate all the activity and information >shared here. Has anyone experienced a problem with the Trace >debugger not displaying watch variables? I can open the Watch >Variables Toolbar and I can open and seemingly add watch variables, but >nothing appears in the "watch Variables Toolbar window (see >attached). I found registry variables relating to the watch window >(see below) but nothing pops out as an obvious solution for me. (I >have been using the trace debugger and successfully viewing watch >variables for the past several months - It just now stopped working). -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to mailto:rbase-l+unsubscr...@googleg
[RBASE-L] - Issue with Trace Debugger and Watch Variables
I'm new to this list and appreciate all the activity and information shared here. Has anyone experienced a problem with the Trace debugger not displaying watch variables? I can open the Watch Variables Toolbar and I can open and seemingly add watch variables, but nothing appears in the "watch Variables Toolbar window (see attached). I found registry variables relating to the watch window (see below) but nothing pops out as an obvious solution for me. (I have been using the trace debugger and successfully viewing watch variables for the past several months - It just now stopped working). We are running R:Base X Enterprise v. 10.0.1.20411 (standard version) [HKEY_CURRENT_USER\Software\R:BASE Technologies\RBGXE\Trace Window\Toolbars\Watch Variables] "DockedTo"="TBXMultiDock4" "DockPos"=dword: "DockRow"=dword: "FloatLeft"=dword: "FloatRightX"=dword:0238 "FloatTop"=dword: "FloatHeight"=dword:044b "FloatWidth"=dword: "Floating"=dword: "Visible"=dword:0001 [HKEY_CURRENT_USER\Software\R:BASE Technologies\RBGXE\Trace Window\Variables] "Variable Panel Width"=dword:050a "Variable Name"=dword: "Type"=dword:0000 "Value"=dword: "Break On"=dword: "Variables"=hex:00,00,00,00 - John John Murnane Arizona Board of Regents / Arizona State University - John _ John Murnane UTO Computing Support Arizona State University work: 602-496-1137 mobile: 480-543-9582 -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. WatchVarIssue.pdf Description: WatchVarIssue.pdf