[RBW] Re: Downtube shifting boss question
Since neither fit then yeah, just replace them. Those Shimano downtube shift cable stops are fine, there are other brands as well. Dia Compe, IRD and Dajia also make some. As I found out in removing them after 15 years, apply a thin layer of anti-seize compound to the boss, if you have some on hand. Otherwise at least a bit of grease. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/f4731c72-cf6b-4cb1-bf47-5066fd0cc638n%40googlegroups.com.
[RBW] Re: Downtube shifting boss question
Thanks Joe, the housing without a ferrule fits but it's quite loose. Thanks Garth, I have both 5mm and 4mm ferrules and to my surprise none fit. I'm wondering if this is the answer - maybe I just need a Shimano cable stop to go in there? https://www.rivbike.com/products/shimano-downtube-cable-stops-pair-17045 Max On Sunday, December 4, 2022 at 1:05:47 AM UTC-5 Joe Bernard wrote: > Will shifter housing fit in there without a ferrule? > > On Saturday, December 3, 2022 at 9:24:24 PM UTC-8 maxcr wrote: > >> Hi Everyone I'm working on a new project and bumped into this shifting >> boss which I've never seen. They don't seem to accept a standard brass >> ferrule. >> >> Any ideas on how to deal with these other than replacing them? >> >> Thanks >> Max >> [image: IMG_8920.jpeg] >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/8045d84a-7ef3-4147-8b55-e5b449640319n%40googlegroups.com.
[RBW] Re: Downtube shifting boss question
Brass ferrules are made in both 5mm and 4mm Max, and yours is likely 5mm and the boss is 4mm. There are step down ferrules that would work. Unless you have a local source it may be easy-er to just replace them with a 5mm boss if keeping the brass appearance is that big of deal. On Sunday, December 4, 2022 at 1:05:47 AM UTC-5 Joe Bernard wrote: > Will shifter housing fit in there without a ferrule? > > On Saturday, December 3, 2022 at 9:24:24 PM UTC-8 maxcr wrote: > >> Hi Everyone I'm working on a new project and bumped into this shifting >> boss which I've never seen. They don't seem to accept a standard brass >> ferrule. >> >> Any ideas on how to deal with these other than replacing them? >> >> Thanks >> Max >> [image: IMG_8920.jpeg] >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0888425c-f6c8-427c-a3a5-6a29085d92bdn%40googlegroups.com.
[RBW] Re: Downtube shifting boss question
Will shifter housing fit in there without a ferrule? On Saturday, December 3, 2022 at 9:24:24 PM UTC-8 maxcr wrote: > Hi Everyone I'm working on a new project and bumped into this shifting > boss which I've never seen. They don't seem to accept a standard brass > ferrule. > > Any ideas on how to deal with these other than replacing them? > > Thanks > Max > [image: IMG_8920.jpeg] > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/ecf97cdd-48d3-413a-8144-e27dd7641320n%40googlegroups.com.
[RBW] Re: Downtube shifting boss question
It looks like a cover to allow running a cable stop at the shifter boss. If you pull it off, there should be a regular shifter boss under it. Those caps allow you to use bar end, thumb shifters or brifters. Ray On Saturday, December 3, 2022 at 9:24:24 PM UTC-8 maxcr wrote: > Hi Everyone I'm working on a new project and bumped into this shifting > boss which I've never seen. They don't seem to accept a standard brass > ferrule. > > Any ideas on how to deal with these other than replacing them? > > Thanks > Max > [image: IMG_8920.jpeg] > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/2a314fe2-1928-48e4-a947-6051646366f3n%40googlegroups.com.
