[Repeater-Builder] Re: Logic Boards for IFR 1600
Hello group Looking for two logic boards for IFR 1600 S service montiors Ed Com/Rad Inc.
Re: [Repeater-Builder] Weird Kerchuking Problem
Hi My 2 cents worth Are you using a PL code which is harmonically related to the AC line freq? i.e. 123.0 or 179.9 ? An earlier respondent suggested changing the PL and I concur with this as a good test. Ed Folta Com/Rad Inc - Original Message - From: Scott [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, April 08, 2006 5:50 PM Subject: [Repeater-Builder] Weird Kerchuking Problem Here's the problem... Every so often (several times in 10 minutes) we are getting a key up of our repeater. Here is what we know... There is no signal coming in on the input frequency. No even a small spike. It is almost like something in the set up is timing and keying, but it is not an exact interval. Doesn't matter is RX tone is enabled in the CAT or not. Here is the setup... Motorola Mitrek trunk mount on 443.275, CAT 250 controller, Com-Spec TS64DS tone board. It has a good 300W 3 can duplexer that is tuned correctly and working well. 75Amp power supply. The cabinet also has an APRS rig in it, as well as a remote receiver for another repeater, and a link radio, but NONE of that is even turned on (and doesn't make a difference when it is). Suggestions as to what to look for...? Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Need Comtegra Board
5 Mar 2006 Greetings Group(s)! I am in need of a Second System Board for the Motorola Comtegra Remote Console. This is the board which creatres I/O for the second system 2/4 wire line connections. 73 ED FOLTA Com/Rad Inc Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re:
25 Jan 2006 Hello Group Looking for a dual section isolator with loads 153.0 Mhz capable Also could use a duplexer - pass reject type if it happens to be attached to the isolator/circulator -- 100 watts - - 5 mhz or greater T to R Price and condx pls 73 Ed Folta Com/Rad Inc YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Group Offer
12 January 2006 0300 CST Hello Group This may sound like a comercial however I am submitting this message for the benenfit of any list member interested in pruchasing a new repeater station. The message is we can offer you this product a substantial Amateur Radio / RT operator - Dealer discount. This may represent a solution to many of your applicaiton challenges See: http://www.com-rad.com/RFT11.htm Best regards all Ed Folta Com/Rad Inc. Des Plaines, IL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re:Need to contact the moderator
I wold like to hear from the moderator of Repeater-Builder@yahoogroups.com Thanks Ed Folta K9QPJ Com/Rad Inc. YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: Looking for Comtegra
Happy New Year Everyone! Urgent! We need a Comtegra remote console: 2 - system capable Working condx PS Not required Pls state price and condx Ed Folta Com/Rad Inc.http://www.com-rad,com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Fw: Looking for Comtegra
- Original Message - From: Com/Rad Inc - Ed Folta [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com; [EMAIL PROTECTED] Sent: Monday, January 02, 2006 2:13 AM Subject: Re: Looking for Comtegra Happy New Year Everyone! Urgent! We need a Comtegra remote console: 2 - system capable Working condx PS Not required Pls state price and condx Ed Folta Com/Rad Inc.http://www.com-rad.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: 800 preselector WTD
Hello Group Looking for a 800 Mhz receiver preselector/cavity system-higher the Q the better. Maybe a DB-4028-2 or equiv. Ed Folta Com/Rad Inc. YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: WTB Micor Tx As'bys
Hello Group Once again we are searching for these sub's UHF Micor repeater: 75-100 W Continous duty PA - Need 2 IPA Assemblies - Need 3 Pls RSVP w/ price condx Ed Folta YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Micor PA wanted
Looking for a UHF Micor continous duty / working condx / capable of 452 Mhz. Ed K9QPJ enail: [EMAIL PROTECTED] http://www.com-rad.com - Original Message - From: Ted Bleiman K9MDM - MDM Radio To: Repeater-Builder@yahoogroups.com ; [EMAIL PROTECTED] Sent: Tuesday, August 23, 2005 11:48 AM Subject: Re: [Repeater-Builder] Micor parts wanted we have tln4926 and m9701 network may take a while mdm "Terry A. Gibbs" [EMAIL PROTECTED] wrote: I'm searching for replacement parts needed to repair apparent lightning damage on a Micor base station used as an ARES repeater operating on 442.425. I'm in need of a Power Control Board (current one is TLN4926), an Antenna Network (current one is TLE1673A), and a control stage transistor (Q902 - M9701).Any help would be appreciated. Thanks.TerryWK4EYahoo! Groups Links* To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED]* Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/ Ted Bleiman K9MDM MDM Radio Ltd - 1629-B N. 31 st Ave Melrose Park, IL 60160 708.681.0300 fax 708.681.9800 web http://www.mdmradio.com - Check it now!! Yahoo! Mail for MobileTake Yahoo! Mail with you! Check email on your mobile phone. YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] ICOM PROGRAMMING
Hello Group Looking for some one with a programmer for eeprom for IC RP 3010 repeater. I have a friend in need of some minor changes in the program Pls reply off list Thanks Ed K9QPJ [EMAIL PROTECTED] YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: Wanted Zetron 32 DAPT
YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Help, repeater output heard on Aircraft Band
HI Matt A few things to look at: Output purity of the repeater Possible addition of some higher Q cavities to reduce sideband noise etc. ( an isolator ahould be on the TX output prior to the duplexer or output cavity/antenna ) Check proximity to the RCAG site where the QRM is getting in to the FAA's radio ( if this is the case ). Maybe an inspection for dissimilar metals - non-linear junctions near the Repeater ant. which may be generating some products. If the FAA heard the bad audio guy only maybe his transmitter(s) is/are overdeviating. Ocasionally we get this type of call from an Entity claiming some interference from a comercial repeater of ours which when checked is usually attributed to some finite failure of a mobile etc. Anyway a few ideas - - - - good luck Ed K9QPJ Com/Rad Inc. Des Plaines, IL - Original Message - From: Mathew Quaife [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, June 17, 2005 10:10 PM Subject: [Repeater-Builder] Help, repeater output heard on Aircraft Band I need some input, not critisism or what I should do, as I know what to do. The other night a user was on the system, his audio was extremely bad into the system, his wife used the same radio and her audio was just as bad. All other users of the system sounded just fine. Two days later he received a phone call from the FAA stating his transmission could be heard on 135.92 if I remember what he told me, as he did not email me the frequency. At any rate, this evening I did some test with my mobile Icom 706 about 3 miles from the repeater. Having a few users carry on a conversation, I could hear the output of the repeater at 132.750 to 132.850, most output at 132.800 Mhz. In the FM mode, voice was detected, but distorted, in the AM mode, voice was very intelligle, as was the repeater id'er. From what I was told, the FAA informant advised he could hear a conversation, but was able to pick out the audio of the user with the bad audio, for which at the time, we was trying to isolate his audio problem. Other than taking the repeater down, which is what will happen here very shortly to prevent interference with Aviation, what might be happening? Any thoughs or suggestions. It will not be until Sunday that I can get to look at the system on the SA. Thanks. Mathew W9MWQ Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Where can I find cables
Hello Group Anyone have a good source for fast delivery and good prices on fabricated coaxial cable jumpers I need about 100, 2 foot long RG214 or equiv cables with male N on each end. Need new merchandise, or at least very clean, Price and delivery time Ed Com/Rad Inc Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Superflex connectors wanted
Anyone have a stash of 1/4 Superflex connectors type N male? Ed Folta Com/Rad Inc. Des Plaines, IL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Need VHF Rx Splitter
24 Mar 05 Looking for a VHF Receiver splitter ( perhaps part of a multicoupler ) with capability of 8 ( or more ) ports. Also will consider a multicoupler system. Cash or trade possible ? Ed Folta Des Plaines, IL -- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: 1/2 Andrew Heliax Sale
Greetings Group For a limited time I can supply FOB Chicago Andrew 1/2 LDF Heliax at $1.45 / ft This is brand new cable Connectors and accessory items hangers, grounding kits etc also available. email or call [EMAIL PROTECTED] 800.298.2850 Ed Folta K9QPJ Com/Rad Inc Des Plaines IL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Bird Mod# 43
Gerry We would be willing to offer $75.00 cash or if you like are you in need of any 2-way radio gear. UHF and VHF Transceivers used newetc. Maybe a swapski ? 73 Ed Folta K9QPJ Com/Rad Inc Des Plaines, IL - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 05, 2005 4:08 PM Subject: [Repeater-Builder] Bird Mod# 43 Hello, I have a Bird Model 43 Wattmeter for sale. It is good condition with N connectors. No elements. Contact me of list if interested. Thanks Gerry S N9MEP Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Re:77-88 Mhz Repeaters
27 Feb 2005 We have new MIdland Mid Band product capable of 77-88 Mhz and will quote rack mount repeater for this range configured out of these sub-assemblies. All new equipment, contollers, duplexer etc Guaranteed Ed Folta Com/Rad Inc Des Plaines, IL http://www.com-rad.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Looking for Heliax
HI Group Seeking a best price scenario Anyone out there have about 3000 feet of 1/2 Heliax. Looking for new product. Can be alternate brand(s), but of the LDF specification. Connectors also required - Female N's - quantity 40. Regards from the Windy City Ed Folta Com/Rad Inc. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] 220 Repeater
Danny Contact me during the week 800-298-2850 re 220 FM Repeater Ed Folta Com/Rad Inc - Original Message - From: jhoonbee [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, February 18, 2005 9:57 PM Subject: [Repeater-Builder] 220 Repeater Hello all, I am looking for a complete ready to use repeater for 220Mhz. Anyone have one for sale? Danny Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Need a picture
HAPPY NEW YEAR TO ALL Anyone have a picture of a Standard Communications model 867 Radio? I am looking for an email-able jpeg etc Ed Folta Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: Advice on Business Band repeater
HI John Have a Merry Christmas If we can be of help please call. I have been in the2-way biz for over 35 yrs and may have some suggestions and shortcuts to make your project less painful Ed Folta Com/Rad Inc800.298.2850 Des Plaines, IL ( sub'n Chicago ) - Original Message - From: KI4AWK [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, December 22, 2004 6:20 AM Subject: Re: [Repeater-Builder] Re: Advice on Business Band repeater Thanks to all that replied, and a special thanks to Skipp, Glenn, and Ed. You guys said what I needed to know. I may be contacting some of you after the holidays for more details. Merry Christmas! --John KI4AWK - Original Message - From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 21, 2004 4:03 PM Subject: [Repeater-Builder] Re: Advice on Business Band repeater Hi John, KI4AWK [EMAIL PROTECTED] wrote: My questions: What kind of cost am I looking at for a repeater pair license? A no nonsense license runs about $350 to $550 complete, depending on what you want. Does each user need a separate license? cost per user? No, each user can operate under the main license if set up properly. Other people can also use your repeater under the right type of license. Can I do the research and find a frequency pair myself, or do I have to go through a coordinator? (if so, what does that cost?) Coordination is probably required. You can suggest a frequency pair to your license ap person or have them research one for you. (We live in a rural area, Thomasville, GA. Finding a pair should not be hard. I am hoping for a pair in the 460 band, as I have a very nice mastr II for that band.) I have been monitoring a specific frequency, and did research through the FCC website on it for users in my area. What else should I do to get started? John Clark - KI4AWK If you don't sneeze at the license amount I mention above, you can Email me off the group and I'll tell you who to contact. It's not rocket science if you're willing to play the game as its currently set up. cheers skipp skipp025 at yahoo.com www.radiowrench.com Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Advice on Business Band repeater
Dear John You may find it worth while to call me at 800.298.2850 We are in this business and understand the "Battelfield Logistics" 73 Ed Folta K9QPJ President Com/Rad Inc. http://www.com-rad.com - Original Message - From: KI4AWK To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 21, 2004 5:55 AM Subject: [Repeater-Builder] Advice on Business Band repeater I am a ham who is contemplatingbuilding a business-band repeater. I have a few questions that maybe you guys can answer and save me hours of reading and searching. I want to do this so that my family can stay in touch. The business license would be in the name of the family farm. I know that not everyone inmy family is interested in radio enough to become a ham, but would definitely own a radio if they could communicate reliably. Cell phones are horrible. I do not want to use GMRS frequencies for three reasons: I am not impressed with the policing of the GMRS frequencies. Anyone can get a GMRS radio, and the line between GMRS and FRS and CB seems to be very blurry. I don't want my mom to be the one listening when someone starts being rude on our frequency. Reason two is that I want to be able to hook up a phone patch. This is strictly forbidden in GMRS. Reason three is the "type acceptance" rule that prohibits several quality radios from being used in GMRS. My questions: What kind of cost am I looking at for a repeater pair license? Does each user need a separate license? cost per user? Can I do the research and find a frequency pair myself, or do I have to go through a coordinator? (if so, what does that cost?) (We live in a rural area, Thomasville, GA. Finding a pair should not be hard. I am hoping for a pair in the 460 band, as I have a very nice mastr II for that band.) I have been monitoring a specific frequency, and did research through the FCC website on it for users in my area. What else should I do to get started? John Clark - KI4AWK Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: Tone Remote Decoder question
Oct 26 - 2004 Hello group! Anyone out there have any recommendation for a Tone Remote Decoder board that will have a minimum recovery time between decoding packets. We are looking for a vendor who has something that will decode quick repetitions of PTT. Explained another way - in a tone remote the first tone is a high level guard tone followed by a high level control tone and then by low-level guard tone ( ptt tone ). this represets a "packet". We wish to send packets with short intervals between them. Say 25 ms. Ed Folta Com/Rad Inc Des Plaines, IL Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: req to Moderator
Could the Moderator contact me directly? Ed Folta Com/Rad Inc [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] midland low band
From one Midland lover to another Be sensitive to the duty cycle of your intended project. I use a series of 70-5300BD on T band here in Chicago and have had to beef 'em up a little 73 Ed Folta Com/Rad Inc. - Original Message - From: Benjamin Naber [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 04, 2004 12:07 PM Subject: Re: [Repeater-Builder] midland low band Got yourself a good fine. Midlands are fine radios. Too bad you probably don't live in SD otherwise I'd get a few off you ~Ben, KB9LFZ --- greenfin2002 [EMAIL PROTECTED] wrote: hi all just came across a pallet of midland lowband radios model no. 70- 050c. i am told they will tune to 6 meters but has anyone used them to make a repeater? if so is it worth while to use these radios? pat Yahoo! Groups Links [EMAIL PROTECTED] __ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kendecom/Advance Communication Systems
Joel If you can, call me on Tuesday @800.298.2850 Ed Folta K9QPJ - Original Message - From: Joel Mele To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 04, 2004 5:18 PM Subject: [Repeater-Builder] Kendecom/Advance Communication Systems Hello to the group: The local ham club might be getting some Homeland Security funds from the County. The group is considering equipment from Kendecom/Advanced Communication Systems. I do not have any knowledge of, or experience with this manufacturer. I would appreciate any comments or info the group might have concerning this equipment. TNX...Joel W4SLH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Mid Band RT
Anyone out there looking for a mid band repeater system 77-88 Mhz? We can do E. Folta Com/Rad Inc. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: PD220 antennas
Can anyone suggest a source for best price on DB220-7 Stationmaster antenna(s) Need 6 ( n.i.b. ) Ed Folta Com/Rad Inc Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
