Hi My 2 cents worth
Are you using a PL code which is harmonically related to the AC line freq? i.e. 123.0 or 179.9 ? An earlier respondent suggested changing the PL and I concur with this as a good test. Ed Folta Com/Rad Inc ----- Original Message ----- From: "Scott" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, April 08, 2006 5:50 PM Subject: [Repeater-Builder] Weird Kerchuking Problem > Here's the problem... > > Every so often (several times in 10 minutes) we are getting a key up > of our repeater. > > Here is what we know... > There is no signal coming in on the input frequency. No even a small > spike. It is almost like something in the set up is timing and keying, > but it is not an exact interval. Doesn't matter is RX tone is enabled > in the CAT or not. > > Here is the setup... > Motorola Mitrek trunk mount on 443.275, CAT 250 controller, Com-Spec > TS64DS tone board. It has a good 300W 3 can duplexer that is tuned > correctly and working well. 75Amp power supply. The cabinet also has > an APRS rig in it, as well as a remote receiver for another repeater, > and a link radio, but NONE of that is even turned on (and doesn't make > a difference when it is). > > Suggestions as to what to look for...? > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
