[Repeater-Builder] MAxtrac Help please
Has anyone rewired the pin out on a Motorola DTMF mic model hmn3013a to a maxtrac 300 . I do not see voltage out the mic jack , this might be a problem . Any help would be great I can get different dtmf mic , but i don't know what model to get .
[Repeater-Builder] Re: Micor Station question
I had to tune the 1st band pass and the second band pass. I did not know about the metal soldered cover that needs removed to allow tunning. I have about 019 watts on a 1 watt scale out the exciter . Thanks for the info . --- In Repeater-Builder@yahoogroups.com, Captainlance captainla...@... wrote: no mods required, other than tuning. I have 2 on 441, both pout out rated power. check the regulated 12 volts to the tripler, the molex plugs on the interface board tend to be intermittent and /or resistive... the exciter board should be making about 350mw to 500 mw..if working correctly. lance n2HBA - Original Message - From: w7nikw7nik To: Repeater-Builder@yahoogroups.com Sent: Wednesday, September 16, 2009 10:30 PM Subject: [Repeater-Builder] Micor Station question I have a micor station 450-470 . I have .019 watts out the exciter after the 1st band pass tfd6373a. The tripler needs modified. The test meter 5 output is 34ma. Where can I find the mods for the tfe6153a tripler? The transmit freq is 441.850, I tried 445.550 element 1 watt with out tunning . I have narrowed it down to the tripler . Should I add some more wire to the turns on the 2nd band pass ?? Any help would be great . -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.101/2376 - Release Date: 09/16/09 11:21:00
[Repeater-Builder] Micor Station question
I have a micor station 450-470 . I have .019 watts out the exciter after the 1st band pass tfd6373a. The tripler needs modified. The test meter 5 output is 34ma. Where can I find the mods for the tfe6153a tripler? The transmit freq is 441.850, I tried 445.550 element 1 watt with out tunning . I have narrowed it down to the tripler . Should I add some more wire to the turns on the 2nd band pass ?? Any help would be great .
[Repeater-Builder] Darcom 9000
I have Darcom 9000 on 928 mhz , is it possible to covert to Ham repeater? Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] GE Mastr II rack mount Help please UHF88b model
Hi I have GE mstrII rack mount uhf. AU88b last four of the model. I have read your web pages you stated that the ge pl ctss board does not transmit pl tone . On my system board I have a card that is (PL19D4172GIGG rev b with 110.9) . I hook up the controller per repeater builder web page. Works great as long as keep the GE stock controller card in with the repeat disabled. My problem is I would like to have a pl to be transmited. The recieve side works fine drops the voltage with the proper tone . I have the controller connected to RUS 0v-3.88v ,cas has 0v-9.8v just testing info for you . I would like to find out a way to remove the ge internal controller and have the pl for recieve and transmit . The external contoller does not have ctss option. I have the manual been reading don't want to put a jumper from decode output to exciter connection without some facts. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] wiring a link radio
I am trying to wire a link radio to the rc210. My problem is COS/COR can't really find it. found ptt,tx,rx audio. I did find data in that dosen't help. Can anyone help me out . The radio I have is the Icom IC207. If any one has any suggestions for a easy link wiring radio please let me know thanks . Nick w7nik Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
