[Repeater-Builder] For Sale: Micor RF Preamlifier
Found this in the shack while cleaning up. Someone out there might be interested. For Sale: Micor RF Preamplifier Model TLD8421B 132-150.8 MHz and one original cable. Also included is the parts list and instructions 68P81016E33-B. Price is $50.00 plus $12.00 USPS. Thanks. Tony, K3WX 301-421-9189 (Silver Spring, MD)
Re: [Repeater-Builder] For Sale: GE Mstr II UHF Repeaters Complete
Are these full blown MII's or converted mobiles? If they are repeater stations (not mobiles), how much and where are you? Paul,ZW Texas On Sun, Apr 4, 2010 at 11:48 PM, ab6li johnever...@sbcglobal.net wrote: Hello to the group. I have two UHF Mstr II repeaters for sale. Both have the 100 watt P.A.'s and are currently in the 440.xxx Tx and 445.xxx Rx areas of the band. These are complete with RLC-1 controllers, band pass band reject 4 can duplexers with cabling and Gas Fet pre-amps. The Pave Paws mitigation has won out and I give up. I also have other Micor UHF repeaters in the ham band w/o accessories. Also lots of parts and pieces for both brands. E-mail for more info. Thanks. John ab6li Yahoo! Groups Links
[Repeater-Builder] For Sale: GE Mstr II UHF Repeaters Complete
Hello to the group. I have two UHF Mstr II repeaters for sale. Both have the 100 watt P.A.'s and are currently in the 440.xxx Tx and 445.xxx Rx areas of the band. These are complete with RLC-1 controllers, band pass band reject 4 can duplexers with cabling and Gas Fet pre-amps. The Pave Paws mitigation has won out and I give up. I also have other Micor UHF repeaters in the ham band w/o accessories. Also lots of parts and pieces for both brands. E-mail for more info. Thanks. John ab6li
Re: [Repeater-Builder] For Sale: GE Mstr II UHF Repeaters Complete
Hi John, Please e-mail me pricing at k...@comcast.net 73 de Brian - Original Message - From: ab6li To: Repeater-Builder@yahoogroups.com Sent: Sunday, April 04, 2010 9:48 PM Subject: [Repeater-Builder] For Sale: GE Mstr II UHF Repeaters Complete Hello to the group. I have two UHF Mstr II repeaters for sale. Both have the 100 watt P.A.'s and are currently in the 440.xxx Tx and 445.xxx Rx areas of the band. These are complete with RLC-1 controllers, band pass band reject 4 can duplexers with cabling and Gas Fet pre-amps. The Pave Paws mitigation has won out and I give up. I also have other Micor UHF repeaters in the ham band w/o accessories. Also lots of parts and pieces for both brands. E-mail for more info. Thanks. John ab6li
[Repeater-Builder] For Sale: 2 SCOM 5k Repeater Controllers
Hi Group, I have two SCOM 5k repeater controllers that are surplus to my needs. I bought one to use on a standalone repeater and then changed it out for an ACC, the other was part of a package I bought from a friend. Both of them are in factory rack mount cabinets. One of them has a display, the other does not. They are both in fine working condition, no issues. Asking $120 for the non-display unit, $150 for the display unit. Shipping is $15 on each of these. Buy 'em both and I'll pay the shipping. Please e-mail me directly at surf_bo...@yahoo.com if you're interested. Thanks! Chris
[Repeater-Builder] For Sale: Andrew F2PNM (Ver2) N Male connectors for HELIAX FSJ2-50 Coaxial Cable
I have 8 new, in the box and sealed in plastic, F2PNM connectors for sale. This is for the popular 3/8 Superflex cable that some use for jumpers. $7 each or all 8 for $50, plus shipping. The boxes are slightly shop-worn. 73, Joe, K1ike
[Repeater-Builder] For Sale Motorola Astro Spectra UHF
I have a Motorola Astro Digital Spectra UHF For Sale or Trade . Hear is some info about this Radio : UHF 450-482 MHz ( Will do 70cm Ham Bands in Both Analog and Digital P25 ) 255Channels/Modes . MODEL NO: DO4RKH9PW7ANSP01 . F/C: 599108-175600-6 . FIRMWARE : 11.70.00.00 DSP : N08.03.03 . Uses CPS Version 05.03.00 . W7 Head , 1 Meg .Comes with Power Supply , Desk Mic , CPS , Mini-UHF - SO239 Adapter , and Desk Mic . Option Flashed on this Radio are : Q806/G806 IMBE / APCO-25 Digital Operation H14/G114 Digital ID Display H101,G101,H169 Conventional Repeater Access (Analog Operation Only)(MDC1200 or Singletone) H868/W298 Conventional Multikey and Analog Conventional MDC OTAR G170/H43 Remote Monitor and Radio Trace H46 One-Touch Operation H39 Selective Radio Inhibit H38/G51 Smartzone Operation Q181 Add StatAlert (MDC1200) Features Q354 OTACS (Over The Air Channel Steering) Q353 OTACR (Over The Air Channel Reassignment) Q352 Soft ID W947/Q947 APCO Packet Data H270/H738 MDC Status Message Q387 Conventional voting scan Q173/G173 Smartzone OmniLink Operation $650 Plus SH . Any Questions Regarding the Radio Please ask . Pictures Available on Request . Paypal Ok . Thank You . Steve . efj44
[Repeater-Builder] For Sale!!!
I Just recently purchased for a project that is no longer in the works. This is a like new REP200 synthesized UHF repeater built by Hamtronics. Purchased new in 2004. 8-10 watt power amp and optional encode/decode boards and n-connectors. Currently on 441.950/446.950 and can easily be changed to your frequency by dip switches on the transmitter and receiver boards. Added is a internal speaker to monitor rec'vr and a toggle switch turning the transmitter off/on to check fer desense or fer working on the repeater. A DB9 serial plug has been installed to connect a external controller. Currently wired to work w/a RC-210 controller. MANUAL INCLUDED. WORKS 100%!!! 601 527-6880 FACTORY PRICES REP200 W/NO CONTROLLER $ 1495.00 ENCODE/DECODE BOARDS $ 180.00 N CONNECTORS $ 10.00 total w/o shipping $ 1685.00 My Price w/shipping $ 650.00 paypal accepted or usps money order checkout at http://www.hamtronics.com/rep200.htm Please contact direct!!Pics upon request!!! Dennis no5c
[Repeater-Builder] FOR SALE RKR-2 w/ control head and Mic
Best off + shipping. Please respond direct. 73, dave wa3gin
[Repeater-Builder] For Sale
1) 1 - Omron MK2PN-s relay... 2)5 - Potter Brumfield R10-E1-W2-V700 3) 6 - Sprague Powerlytic Capacitors 3600-40dc (total of 3) / 1-50dc / 2700-25dc / 22000-15dc / 4) 2 - Nippon 13000UF-50vdc 5) 1 - Motorola 11000-35vdc
[Repeater-Builder] For Sale
Equatorial 5100 Controller model: 5102-00 channel number: Spacenet part: 99-0022-74 I don't know if it works as I don't have a plug for it. I have Never opened it don't ask me to. I would'nt know what I'd be looking at. $100.00 and you pay shipping. Similiar item being sold on eBay for more...
Re: [Repeater-Builder] For Sale - Micor Upgrade
what band/frequency range is this for? -- Original Message -- Received: Sun, 27 Sep 2009 10:09:32 PM PDT From: Ham-Radio ham-ra...@cap-comm.com To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] For Sale - Micor Upgrade Greetings all, Do you have a Micor that needs an upgrade? I have the ultimate upgrade for your Micor VHF Repeater. This is what I have. Motorola Micor Upright Base and Repeater (RT) Station manual: 68P81022E90-F 8560AS tubes in pairs- three pairs for total of six spare tubes TPN1132A Low Voltage supply board TLN1675 A-1 (also stamped TLN5706A) Meter Panel TPN1131 A-1 (also stamped TLN5699A) Power Supply TLN 4198A PA Deck - two complete units with tubes. This is an ALL or NOTHING deal. I have a figure in mind, but will consider any offer. This is some equipment that was removed from commercial service. It is not a part of my business as I acquired all of this on trade. Please contact direct at ham-ra...@cap-comm.com. Thanks, Charles Miller WD5EEH
[Repeater-Builder] For Sale/Trade: EF Johnson 242-3450 LPI repeater (UHF)
Group: I have for sale 1 EFJohnson 242-3450-030 UHF LPI repeater, currently on 464MHz TX, 469MHz RX with tone PL. It is in good condition and working properly. All modules present (TX, RX, PA, Control, Power Supply and Duplexer). I don't work with Johnson equipment and it is surplus to my needs. I would like to sell it outright (PLEASE MAKE OFFER), or MORE PREFERABLY trade it for any of the following: Doug Hall RBI-1 Remote Base Interface ACC RC-850, RC-85 or RC-96 repeater controllers ACC FC-900 remote base interfaces ICOM 900/901 band modules (10m, 6m, 2m, 220, 440 or 1200) Please e-mail me off-list if interested at surf_bo...@yahoo.com. Thanks, Chris
Re: [Repeater-Builder] For Sale/Trade: EF Johnson 242-3450 LPI repeater (UHF)
is this the black repeater with a display on one of the cards? if so is it 25Kh or 12.5Kz. ? - Original Message - From: surf_boy82 To: Repeater-Builder@yahoogroups.com Sent: Wednesday, July 15, 2009 7:59 PM Subject: [Repeater-Builder] For Sale/Trade: EF Johnson 242-3450 LPI repeater (UHF) Group: I have for sale 1 EFJohnson 242-3450-030 UHF LPI repeater, currently on 464MHz TX, 469MHz RX with tone PL. It is in good condition and working properly. All modules present (TX, RX, PA, Control, Power Supply and Duplexer). I don't work with Johnson equipment and it is surplus to my needs. I would like to sell it outright (PLEASE MAKE OFFER), or MORE PREFERABLY trade it for any of the following: Doug Hall RBI-1 Remote Base Interface ACC RC-850, RC-85 or RC-96 repeater controllers ACC FC-900 remote base interfaces ICOM 900/901 band modules (10m, 6m, 2m, 220, 440 or 1200) Please e-mail me off-list if interested at surf_bo...@yahoo.com. Thanks, Chris
Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter
Fred Esteves wrote: Do you have prices As I stated in the original listing, please make offers. Note that the GE gear is already spoken for (though the buyer may not be able to use all of it) and the RVS-8 is so popular that I'll be listing it on eBay. Matthew Kaufman
Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter
I agree we need some prices... Im very interested in the encoder/decoder TIM --- On Wed, 7/8/09, Fred Esteves estev...@yahoo.com wrote: From: Fred Esteves estev...@yahoo.com Subject: Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter To: Repeater-Builder@yahoogroups.com Date: Wednesday, July 8, 2009, 6:58 AM Do you have prices --- On Tue, 7/7/09, Matthew Kaufman matt...@matthew. at wrote: From: Matthew Kaufman matt...@matthew. at Subject: [Repeater-Builder] for sale: 420 MHz linking radios, voter To: Repeater-Builder@ yahoogroups. com Date: Tuesday, July 7, 2009, 11:01 AM Over the past two decades I've been accumulating gear to link all my repeaters together. But as I posted a few weeks back, I'm now linking everything with VoIP. There's at least three generations of equipment listed below, and I need to clear out the entire inventory in order to make space and help fund future repeater system development. Please make offers, equipment is located near Santa Cruz, CA: Hamtronics: 1 REP-200N 10 watt repeater w/no controller, type N connectors. RX is 441 MHz, TX is 420 MHz. 6 R304-2 UHF synthesized receiver, wired and tested, mounted in A89 enclosure 3 T304-2 UHF synthesized exciter, wired and tested, mounted in A88 enclosure Yaesu/Vertex: 1 Rare UHF-Low VXR-5000 repeater (40H259J) (spec for 400-420 MHz) w/internal AC power supply Icom: 40+ F420-9 403-430 MHz 32-channel mobile radio (25 in good condition, others have various issues, mostly display problems. Also have 16 custom cables to access internal connector discriminator audio + COS for use as link receiver, 8 custom cables to access internal connector TX audio + PTT for use as link transmitter. GE: 12+ Mastr Exec low-power full-duplex mobiles, 77 range (SX55FAS77A) with internal mobile duplexer Misc spare control heads, high-power Mastr Exec PAs, etc. LDG: 1 RVS-8 repeater voter Com-Spec: Handful of TS-64 CTCSS Encoder/Decoder 1 TP-3200 repeater tone panel (rack-mount) Motorola: 2+ Micor UHF mobile, converted to duplex repeater operation Matthew Kaufman matt...@matthew. at
Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter
Do you have prices --- On Tue, 7/7/09, Matthew Kaufman matt...@matthew.at wrote: From: Matthew Kaufman matt...@matthew.at Subject: [Repeater-Builder] for sale: 420 MHz linking radios, voter To: Repeater-Builder@yahoogroups.com Date: Tuesday, July 7, 2009, 11:01 AM Over the past two decades I've been accumulating gear to link all my repeaters together. But as I posted a few weeks back, I'm now linking everything with VoIP. There's at least three generations of equipment listed below, and I need to clear out the entire inventory in order to make space and help fund future repeater system development. Please make offers, equipment is located near Santa Cruz, CA: Hamtronics: 1 REP-200N 10 watt repeater w/no controller, type N connectors. RX is 441 MHz, TX is 420 MHz. 6 R304-2 UHF synthesized receiver, wired and tested, mounted in A89 enclosure 3 T304-2 UHF synthesized exciter, wired and tested, mounted in A88 enclosure Yaesu/Vertex: 1 Rare UHF-Low VXR-5000 repeater (40H259J) (spec for 400-420 MHz) w/internal AC power supply Icom: 40+ F420-9 403-430 MHz 32-channel mobile radio (25 in good condition, others have various issues, mostly display problems. Also have 16 custom cables to access internal connector discriminator audio + COS for use as link receiver, 8 custom cables to access internal connector TX audio + PTT for use as link transmitter. GE: 12+ Mastr Exec low-power full-duplex mobiles, 77 range (SX55FAS77A) with internal mobile duplexer Misc spare control heads, high-power Mastr Exec PAs, etc. LDG: 1 RVS-8 repeater voter Com-Spec: Handful of TS-64 CTCSS Encoder/Decoder 1 TP-3200 repeater tone panel (rack-mount) Motorola: 2+ Micor UHF mobile, converted to duplex repeater operation Matthew Kaufman matt...@matthew. at
Re: [SPAM] Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter
I tried sending him a direct reply and haven't got an answer for days... Corey N3FE On Wed, 8 Jul 2009, Fred Esteves wrote: Do you have prices --- On Tue, 7/7/09, Matthew Kaufman matt...@matthew.at wrote: From: Matthew Kaufman matt...@matthew.at Subject: [Repeater-Builder] for sale: 420 MHz linking radios, voter To: Repeater-Builder@yahoogroups.com Date: Tuesday, July 7, 2009, 11:01 AM Over the past two decades I've been accumulating gear to link all my repeaters together. But as I posted a few weeks back, I'm now linking everything with VoIP. There's at least three generations of equipment listed below, and I need to clear out the entire inventory in order to make space and help fund future repeater system development. Please make offers, equipment is located near Santa Cruz, CA: Hamtronics: 1 REP-200N 10 watt repeater w/no controller, type N connectors. RX is 441 MHz, TX is 420 MHz. 6 R304-2 UHF synthesized receiver, wired and tested, mounted in A89 enclosure 3 T304-2 UHF synthesized exciter, wired and tested, mounted in A88 enclosure Yaesu/Vertex: 1 Rare UHF-Low VXR-5000 repeater (40H259J) (spec for 400-420 MHz) w/internal AC power supply Icom: 40+ F420-9 403-430 MHz 32-channel mobile radio (25 in good condition, others have various issues, mostly display problems. Also have 16 custom cables to access internal connector discriminator audio + COS for use as link receiver, 8 custom cables to access internal connector TX audio + PTT for use as link transmitter. GE: 12+ Mastr Exec low-power full-duplex mobiles, 77 range (SX55FAS77A) with internal mobile duplexer Misc spare control heads, high-power Mastr Exec PAs, etc. LDG: 1 RVS-8 repeater voter Com-Spec: Handful of TS-64 CTCSS Encoder/Decoder 1 TP-3200 repeater tone panel (rack-mount) Motorola: 2+ Micor UHF mobile, converted to duplex repeater operation Matthew Kaufman matt...@matthew. at
Re: [SPAM] Re: [Repeater-Builder] for sale: 420 MHz linking radios, voter
same here .. I guess he's not in a rush to sell On Thu, Jul 9, 2009 at 1:08 PM, Corey Dean N3FEn...@myqrz.com wrote: I tried sending him a direct reply and haven't got an answer for days... Corey N3FE On Wed, 8 Jul 2009, Fred Esteves wrote: Do you have prices --- On Tue, 7/7/09, Matthew Kaufman matt...@matthew.at wrote: From: Matthew Kaufman matt...@matthew.at Subject: [Repeater-Builder] for sale: 420 MHz linking radios, voter To: Repeater-Builder@yahoogroups.com Date: Tuesday, July 7, 2009, 11:01 AM Over the past two decades I've been accumulating gear to link all my repeaters together. But as I posted a few weeks back, I'm now linking everything with VoIP. There's at least three generations of equipment listed below, and I need to clear out the entire inventory in order to make space and help fund future repeater system development. Please make offers, equipment is located near Santa Cruz, CA: Hamtronics: 1 REP-200N 10 watt repeater w/no controller, type N connectors. RX is 441 MHz, TX is 420 MHz. 6 R304-2 UHF synthesized receiver, wired and tested, mounted in A89 enclosure 3 T304-2 UHF synthesized exciter, wired and tested, mounted in A88 enclosure Yaesu/Vertex: 1 Rare UHF-Low VXR-5000 repeater (40H259J) (spec for 400-420 MHz) w/internal AC power supply Icom: 40+ F420-9 403-430 MHz 32-channel mobile radio (25 in good condition, others have various issues, mostly display problems. Also have 16 custom cables to access internal connector discriminator audio + COS for use as link receiver, 8 custom cables to access internal connector TX audio + PTT for use as link transmitter. GE: 12+ Mastr Exec low-power full-duplex mobiles, 77 range (SX55FAS77A) with internal mobile duplexer Misc spare control heads, high-power Mastr Exec PAs, etc. LDG: 1 RVS-8 repeater voter Com-Spec: Handful of TS-64 CTCSS Encoder/Decoder 1 TP-3200 repeater tone panel (rack-mount) Motorola: 2+ Micor UHF mobile, converted to duplex repeater operation Matthew Kaufman matt...@matthew. at
[Repeater-Builder] for sale: 420 MHz linking radios, voter
Over the past two decades I've been accumulating gear to link all my repeaters together. But as I posted a few weeks back, I'm now linking everything with VoIP. There's at least three generations of equipment listed below, and I need to clear out the entire inventory in order to make space and help fund future repeater system development. Please make offers, equipment is located near Santa Cruz, CA: Hamtronics: 1 REP-200N 10 watt repeater w/no controller, type N connectors. RX is 441 MHz, TX is 420 MHz. 6 R304-2 UHF synthesized receiver, wired and tested, mounted in A89 enclosure 3 T304-2 UHF synthesized exciter, wired and tested, mounted in A88 enclosure Yaesu/Vertex: 1 Rare UHF-Low VXR-5000 repeater (40H259J) (spec for 400-420 MHz) w/internal AC power supply Icom: 40+ F420-9 403-430 MHz 32-channel mobile radio (25 in good condition, others have various issues, mostly display problems. Also have 16 custom cables to access internal connector discriminator audio + COS for use as link receiver, 8 custom cables to access internal connector TX audio + PTT for use as link transmitter. GE: 12+ Mastr Exec low-power full-duplex mobiles, 77 range (SX55FAS77A) with internal mobile duplexer Misc spare control heads, high-power Mastr Exec PAs, etc. LDG: 1 RVS-8 repeater voter Com-Spec: Handful of TS-64 CTCSS Encoder/Decoder 1 TP-3200 repeater tone panel (rack-mount) Motorola: 2+ Micor UHF mobile, converted to duplex repeater operation Matthew Kaufman matt...@matthew.at
[Repeater-Builder] For Sale Goodies !!
Hurricane Season, and Field Day are coming up. I have: To SELL or TRADE Coleman Power Mate MAXA 5000 ER Plus generator, 10 HP. Tecumsah power plant, 5KW + low hours, good condition, starts first pull every time. List on the Trader's Net for $275.00, or will entertain any interesting trade proposals, Pick up only, or within 50 miWPB. .*MICROPHONES* ICOM HM-36 Hand Mic, very clean, $30.00 + shipping Hallicrafters Hand Mic, very clean, no model # has 6 pin DIN plug $30.00 + shipping D-104'sGood, clean and working 100%, Amplified or Unamplified, $40.00 ea. + shipping Yaesu YD-148---Dual impedance Desk mic for earlier Yaesus,(4 wire) sounds good, $40.00 + shipping WANTED: CDE AR 10, 22, or 22XL, control box (4 wire) WANTED; Model# 307-CG External Speaker for TENTEC JUPITER ( Charcoal Grey ) Clean please, no Junk !! WANTED; for ICOM 706, FL 223 SSB narrow filter, also UT 106 DSP Module, *RIGS* SWAN Cygnet 270B, Very Nice, Complete tune up and alignment by Mr. SWAN, himself', John Bruchey, radio is 39 years young, and is available to a serious Swan lover for $250.oo, FIRM, shipped to your door. Comes with clean original manual, and EF Johnson desk mic Icom IC 701 HF, 10 thru 160 meters, Solid State,considering it's age, (30 years) rates a NINE, in appearance,.easy to operate, Great for starter rig, Field Day, or back up. Operates 100%, W/ filters installed, Icom SM-2 Desk mic and Icom hand mic, Also Icom PS-120 power supply, original manuals for each,and original boxes. $325.00 FIRM shipped. ADI AR-146 2 meter mobile, clean, dependable, fairly easy to operate, 50 WATTS out, Original box, mic and copy of manual, First $75.00 gets it, + shipping 500 ft, Spool RG-8X, Quality coax,LOW LOSS, Mil Spec, 95% copper braid, $125.00 plus shipping. 230ft, Andrew Heliax ( 1/2 in.hardline) FSJ4 50B BRAND NEW, selling right now from RF Parts at over $3.50 per ft. My price, now only, $350.00 picked upTNX de Lee K4LJP 73 -- Smart pills are placebos, you can't fix stupid. -- Smart pills are placebos, you can't fix stupid.
Re: [Repeater-Builder] For Sale Uniden BC-895XLT Trunk Tracker Base Scanner
Price has be Lowered to $85.00 Plus $10.40 SH . Thanks efj44 In a message dated 4/2/2009 5:47:59 P.M. Eastern Daylight Time, cat2...@aol.com writes: Up for Sale is a Uniden Bearcat BC-895 XLT Base Trunk Tracker Scanner . Comes with Back of Set Antenna and Power Supply . $ 115 Plus 10.40 SH . Any Questins Please Ask . Paypal Payments and Money Orders ok . If Paying Via Paypal Please Contact me for Paypal Email Address . Thanks . efj44 **Feeling the pinch at the grocery store? Make dinner for $10 or less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood0001)
[Repeater-Builder] For Sale Uniden BC-895XLT Trunk Tracker Base Scanner
Up for Sale is a Uniden Bearcat BC-895 XLT Base Trunk Tracker Scanner . Comes with Back of Set Antenna and Power Supply . $ 115 Plus 10.40 SH . Any Questins Please Ask . Paypal Payments and Money Orders ok . If Paying Via Paypal Please Contact me for Paypal Email Address . Thanks . efj44
[Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
Hi All, I have 3 UHF mastr II stations for sale. These are the radio portion only. I do have the heavy power supplies they came with but I highly doubt you want to pay the shipping (if interested please ask) 1) DC75YAS88B (I am going off memory) 100w UHF station that was previously operating in burn in works great. Unit has a set of 2C Icoms on 444.575/449.575 that were redone compensated by ICM. Unit is a 100 continuous duty factory repeater. Unit has a pigtail attached to hook into a Arcom RC-210. I have a full set of cards for this can install them if you want them. Unit only has a 10v regulator card in it presently. Unit also has CG Encode (factory DIP switch) / Decode (Versatone) I would like to get $300 OBO (you must pay shipping!) 2) SC65UAS88B (Received as a trade was working 450-470mhz 60w continuous duty. Unit has a fan installed in the PA cover. Unit has not been tested by me but was removed in working condition. Unit may have 2C Icom's installed. I have cards for this should you want them 3) (comb label missing) Received as a trade was working 75w (I think) UHF (450-470) IMTS station Unit has a fan installed in the PA cover. Unit has not been tested by me but was removed in working condition. Unit may have 2C Icom's installed. I have cards for this should you want them Should you be local or close to me I also have 3 6' GE cabinets that I would like to have go bye bye from my storage unit! Please email me off list if you are interested in these items at: do...@_engineeringinc_._com (remove _'s) I also am open to trades for all the above merchandise. I would like to get my hands on a service monitor (IFR or Motorola (should you want all 3 stations) a HP Frequency counter, a Bird Wattmeter with case some slugs (model 43) I also would be interested if you have any Tek Mainframe counters mainframes (TM500 series) Thanks, --Don
Re: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
Should you be local or close to me I also have 3 6' GE cabinets that I would like to have go bye bye from my storage unit! . would love ge cabinets but alass to far away if any one has any in and around the toronto area :)
RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
Don, I have an IFR-1000S that works. Needs a new battery. Neg. on price. I also have a Motorola R2600C. Works great, only needs calibration. Do you still live in Boise, ID? Charles Miller WD5EEH Dallas, TX
RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
I would be interested in purchasing one of those. Can you give me a idea of what you want $$ wise for the IFR the moto one? Yes I am still in boise --Don -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ham-Radio Sent: Wednesday, March 04, 2009 3:52 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs Don, I have an IFR-1000S that works. Needs a new battery. Neg. on price. I also have a Motorola R2600C. Works great, only needs calibration. Do you still live in Boise, ID? Charles Miller WD5EEH Dallas, TX Yahoo! Groups Links
Re: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
Charles, I am interested in the service monitors . Mike KB5FLX m.dietr...@peoplepc.com -- - Original Message - From: Ham-Radio To: Repeater-Builder@yahoogroups.com Sent: Wednesday, March 04, 2009 4:51 PM Subject: RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs Don, I have an IFR-1000S that works. Needs a new battery. Neg. on price. I also have a Motorola R2600C. Works great, only needs calibration. Do you still live in Boise, ID? Charles Miller WD5EEH Dallas, TX
RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs
Mike, The Motorola is listed on my website http://www.cap-comm.com/equipment.html for you to look at. Charles Miller _ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mike Dietrich Sent: Wednesday, March 04, 2009 4:58 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs Charles, I am interested in the service monitors . Mike KB5FLX m.dietr...@peoplepc.com -- - Original Message - From: Ham-Radio mailto:ham-ra...@cap-comm.com To: Repeater-Builder@yahoogroups.com Sent: Wednesday, March 04, 2009 4:51 PM Subject: RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations ICOMs Don, I have an IFR-1000S that works. Needs a new battery. Neg. on price. I also have a Motorola R2600C. Works great, only needs calibration. Do you still live in Boise, ID? Charles Miller WD5EEH Dallas, TX
[Repeater-Builder] For Sale: Telewave dual Isolator TX-RX duplexer
Hi All, I have decided to sell the rest of the equipment that was on my repeater that isn't getting built. I have for sale the following things: Telewave T1050B Dual isolator tuned to 444.575 (the paint is a little roughed up on the loads but works 100%) Pictures: http://www.wiztech.biz/~dwisdom/stuff_for_sale/circulator/ Price: $150 OBO + Shipping TX-RX 28-70-02 Vari-Notch Duplexer 450-470mhz Tuned to 444.575 TX/449.575 RX Pictures: http://www.wiztech.biz/~dwisdom/stuff_for_sale/duplexer/ Price $350 OBO + Shipping Both items are in good condition were 100% functioning when we were burning in the repeater decided to shelve the project. If you don't like my prices feel free to make an offer. If interested email me off list at: do...@_engineeringinc_._com (remove _'s) Thanks, --Don
[Repeater-Builder] For Sale 2 EF Johnson 5100 RF Decks .
For Sale 2 EF Johnson 5100 Replacment RF Decks . One is a 800 MHz RF Deck , and the Other is a UHF RF Deck . Asking $45.00 each . Any Questions Pleae Ask . Thank you . efj44 .
RE: [Repeater-Builder] For Sale ICOM IC-701 HF Base w/ps and Desk Mic
Hi Steve, Maybe I have something for your IC-701. Give me your e-mail address. 73 Eric _ De : Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] De la part de Steve Envoyé : 6 décembre 2008 22:13 À : Repeater-Builder@yahoogroups.com Objet : [Repeater-Builder] For Sale ICOM IC-701 HF Base w/ps and Desk Mic For Sale ICOM IC-701 HF Base . 10-160 Meters . Comes with ICOM IC-PS20 and ICOM IC-SM2 Desk Mic . and Cobra Ultra Lite Dipole 10-80 Meters w/ 100 ft 450 Ohm Ladder Line . $350 Plus SH . Any Questions Regarding the Item For Sale , Please ask . Thank You . Pictures Available on Request . Steve.efj44
[Repeater-Builder] For Sale ICOM IC-701 HF Base w/ps and Desk Mic
For Sale ICOM IC-701 HF Base . 10-160 Meters . Comes with ICOM IC-PS20 and ICOM IC-SM2 Desk Mic . and Cobra Ultra Lite Dipole 10-80 Meters w/ 100 ft 450 Ohm Ladder Line . $350 Plus SH . Any Questions Regarding the Item For Sale , Please ask . Thank You . Pictures Available on Request . Steve.efj44
[Repeater-Builder] FOR SALE: Sinclair C-3037 Multicouplers / Transmit Combiner
Got 4 sets of Sinclair C-3037 Multicouplers. http://www.sinclairtechnologies.com/catalog/product.aspx?id=101 http://www.sinclairtechnologies.com/catalog/product.aspx?id=101 They are currently tuned in the the 460 Mhz area. All 4 sets are in very good shape. Looking for $150 / set + shipping. Please contact me off list if you are interested. Eric VA3EAM
[Repeater-Builder] for sale
hey guys i have to sell this ASAP Micor uhf repeater in a cabinet it is complete with test set amp cans 12 volt Motorola power supply that runs off 12volt power it has a 50 amp astron and 3 26 amp hour batteries it has a rc210 repeater controller with 2 digital delay boards and phone patch. 75w amp Kevin and Scott have looked over the chassis and modified the control card in it there is a pre amp please guys i need to sell this as a unit to get rid of it. i only want $1000 dollars for the hole thing and you pick it up if not it will end up in a junk yard some where so please contact me off list if you are interested or call me i am in the phone book in Cumming Georgia email is [david at (callsign) dot com] David Schornak n1ib
RE: [Repeater-Builder] For Sale: CAT Controller
Doug, Did you sell the RLS boards? I'm interested.. - Mike From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Doug Fitts Sent: Sunday, August 31, 2008 10:02 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] For Sale: CAT Controller I have for sale two new CAT RLS-1000B controllers. Here is a link http://www.catauto.com/rls1000.html that describes what they are and how they are used in a typical repeater system. I have one additional controller board in full operation [but not for sale] attached to my 900mhz repeater system. I can select one of three remotebase radios connected through the 1000B board or, all three radios if necessary. One RLS board is mounted in the factory model RME-200L rack mounted enclosure and the other board is mounted in a Bud aluminum chassis and mounted on a 19 inch rack panel [a previous repeater project]. Asking $130 + shipping for the board in the factory enclosure and $145 + shipping for the board in the Bud chassis and rack panel package. If interested please email me direct, off the list and I will provide to you all the particulars to include photos of the each unit. 73 Doug W7FDF [EMAIL PROTECTED] mailto:cienegaradio%40cox.net __ NOD32 3401 (20080829) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com
[Repeater-Builder] For Sale: CAT Controller
I have for sale two new CAT RLS-1000B controllers. Here is a link http://www.catauto.com/rls1000.html that describes what they are and how they are used in a typical repeater system. I have one additional controller board in full operation [but not for sale] attached to my 900mhz repeater system. I can select one of three remotebase radios connected through the 1000B board or, all three radios if necessary. One RLS board is mounted in the factory model RME-200L rack mounted enclosure and the other board is mounted in a Bud aluminum chassis and mounted on a 19 inch rack panel [a previous repeater project]. Asking $130 + shipping for the board in the factory enclosure and $145 + shipping for the board in the Bud chassis and rack panel package. If interested please email me direct, off the list and I will provide to you all the particulars to include photos of the each unit. 73 Doug W7FDF [EMAIL PROTECTED]
Re: [Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options
Mike, Thanks for the reply! No, not yet. I still have it available. 73. Doug - Original Message - From: Michael Ryan To: Repeater-Builder@yahoogroups.com Sent: Thursday, August 28, 2008 10:27 PM Subject: RE: [Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options Doug, Did you move this controller? - Mike From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of souryatlexcomincdotnet Sent: Tuesday, August 26, 2008 11:55 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options Hello to the group, I have for sale a NEW, never used FF Systems FF-800 4-port controller w/autopatch (PCB Rev.E). The autopatch and IC-901 option are independent and DO NOT use one of the ports to function like similar controllers, so you still have all 4 ports available. Would prefer to trade for a NEW (or possibly used) Kenwood TKR-850 repeater. It has the following options: FF-CAD Audio Delay Board FF-8090 IC-901 Interface Board FF-8010 LED Display FF-180 Rackmount Chassis Also included is the Installation and Operation manual along with the various factory pre-made cables, connectors, etc. to connect to the Icom IC-901 radio for remote base linking. This controller costs over $1300.00 with these options, will sell for $1000.00 OBO, and will include shipping with delivery confirmation to lower 48 states. Again, would prefer to trade but am open to offers. Pictures available upon request. Please e-mail direct. 73 and thanks, Doug N4TZD __ NOD32 3390 (20080826) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com
[Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options
Hello to the group, I have for sale a NEW, never used FF Systems FF-800 4-port controller w/autopatch (PCB Rev.E). The autopatch and IC-901 option are independent and DO NOT use one of the ports to function like similar controllers, so you still have all 4 ports available. Would prefer to trade for a NEW (or possibly used) Kenwood TKR-850 repeater. It has the following options: FF-CADAudio Delay Board FF-8090 IC-901 Interface Board FF-8010 LED Display FF-180Rackmount Chassis Also included is the Installation and Operation manual along with the various factory pre-made cables, connectors, etc. to connect to the Icom IC-901 radio for remote base linking. This controller costs over $1300.00 with these options, will sell for $1000.00 OBO, and will include shipping with delivery confirmation to lower 48 states. Again, would prefer to trade but am open to offers. Pictures available upon request. Please e-mail direct. 73 and thanks, Doug N4TZD
RE: [Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options
Doug, Did you move this controller? - Mike From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of souryatlexcomincdotnet Sent: Tuesday, August 26, 2008 11:55 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] For Sale or Trade: NEW FF Systems FF-800 Repeater Controller w/options Hello to the group, I have for sale a NEW, never used FF Systems FF-800 4-port controller w/autopatch (PCB Rev.E). The autopatch and IC-901 option are independent and DO NOT use one of the ports to function like similar controllers, so you still have all 4 ports available. Would prefer to trade for a NEW (or possibly used) Kenwood TKR-850 repeater. It has the following options: FF-CAD Audio Delay Board FF-8090 IC-901 Interface Board FF-8010 LED Display FF-180 Rackmount Chassis Also included is the Installation and Operation manual along with the various factory pre-made cables, connectors, etc. to connect to the Icom IC-901 radio for remote base linking. This controller costs over $1300.00 with these options, will sell for $1000.00 OBO, and will include shipping with delivery confirmation to lower 48 states. Again, would prefer to trade but am open to offers. Pictures available upon request. Please e-mail direct. 73 and thanks, Doug N4TZD __ NOD32 3390 (20080826) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com
[Repeater-Builder] For Sale: Remotebase Controllers
Before I post on the eBAY website [later this evening]I have two CAT RLS-1000B link port controller boards. One is mounted in the CAT factory aluminum box. The second in a similar Bud aluminum chassis with a 19 inch rack panel attached. The controller in the factory box normally sells for a total of $129 [board] and $59.00 [box] plus shipping respectively. I am letting it go for $130 dollars plus $12.00 Priority Mail shipping. The controller attached to the rack panel and, in the aluminum box, I am letting it go for $140 dollars plus $14.50 Priority Mail shipping. The RLS-1000B controller board can be reviewed here at: http://www.catauto.com/rls1000.html NOTE: Both these boards are new. I purchased three last year and now only using the third one in my remotebase system on 900mhz. Sorry but I will not consider an international transaction. The first Ham to make a firm offer will get the deal. I will announce [post here] if the items have been spoken for. If interested or have any questions contact me **direct**: [EMAIL PROTECTED] 73 Doug W7FDF Vail, Arizona
[Repeater-Builder] For Sale: Complete 800 MHz LTR repeater site equipment.
For Sale: 1x Complete 5 Channel 800 MHz LTR Site (Less Enclosure, Feeders, Antennas and Racks) The equipment is listed below and was in good working condition and made up a complete 5 channel site prior to de-commissioning. There are some spares which some have been included here, some need to be checked and added. Generally rack it up, plug it together, re-programme and re-align Filters/Combiners and you are in business. This was the last operational LTR site in our region and was one of three sites. We moved users to UHF Conventional due to political reasons, The other two sites have been disposed of, but there are some spares from these sites, such as TX Combiners, Other ends of DMR Microwave links, service manuals etc, that will be included with the below items. Obviously all interconnection cables will be included so as to make this a kitset Turn Key site. We do have the antennas and feeders, but these would incur excessive shipping costs. Will accept offers around USD$19K Or Best Offer for the lot, (See above comment) Including the below items ... We need to get this stuff moved. Below is in exceptional condition 9.5/10 5x EFJ Viking 242-2008-X32 75 Watt Base stations/Repeaters 5x Zetron Model 49 Trunking repeater controllers 1x Zetron Model 2540 Fastnet Switch 2x Mitec 600MM H Band 10 GHz DMR point to point Microwave links 10 MBPS 2x AWA AMUX Multiplexers C/W EM Cards to suit Mitec DMR Units 2x EMS Corp 800 MHz 6 Channel TX Combiners 2x EMR Corp 26108 800 MHz Rx Multicouplers C/w Window filters 2x EMR Corp 665-49 800 MHz Duplexers 5x Stanilite KL Series 800MHz Repeaters Thanks for reading :-) Best Regards _ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.
[Repeater-Builder] For Sale - MSF5000 Yellow Tee Cable
I have a new and unused Motorola Tee Cable TLE5772A that is excess to my needs. This is the MSF5000 Combining Tee Duplexer that is intended for the 435-475 MHz band, TX above RX, and a 5-20 MHz split. Current Motorola price on this cable is $172.55 (Gasp!) It is still in a sealed package. Make an offer directly to me at mycall at verizon dot net. 73, Eric Lemmon WB6FLY
[Repeater-Builder] For Sale: 800 MHz Base stations, Combiners and LTR products
Hello Group, We are in the process of de-commissioning a complete surplus 800 MHz LTR repeater site. The equipment is listed below and was in good working condition and made up a complete 5 channel site prior to de-commissioning. There are some spares which some have been included here, some need to be checked and added Will accept sensible offers on the following items please. 5x EFJ Viking 242-2008-X32 75 Watt Base stations/Repeaters 5x Zetron Model 49 Trunking repeater controllers 1x Zetron Model 2540 Fastnet Switch 2x Mitec 600MM H Band 10 GHz DMR point to point Microwave links 10 MBPS 2x AWA AMUX Multiplexers C/W EM Cards to suit Mitec DMR Units 2x EMS Corp 800 MHz 6 Channel TX Combiners 2x EMR Corp 26108 800 MHz Rx Multicouplers C/w Window filters 2x EMR Corp 665-49 800 MHz Duplexers 5x Stanilite KL Series 800MHz Repeaters Thanks for reading :-) Best Regards _ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you.
[Repeater-Builder] For Sale: Two, MSR2000 VHF Base Stations
For Sale/Moving: I have two, MSR2000 VHF Base Station units that I am selling. One has the test kit included with it. I do not know much about these units, however I do have complete photos available upon e-mail request. They were working when pulled from public-safety service less than a year ago. I am in the process of moving and would just like to sell them off. I am asking $200 for the complete package, yes that includes both MSR2000 Base Stations and the Test Kit. They must be picked up locally as they are too heavy and too large to ship. I am located near Ann Arbor, Michigan and I would be willing to drive them locally if needed. Please e-mail me directly with any questions at: [EMAIL PROTECTED] Thanks, Jerry - K8GLD
[Repeater-Builder] For sale: Icom IC-900AE Service manual
I have a VERY good condition Icom 900 service manual. The manual covers all the RF modules: UX-19A/E, UX-29A/E, UX-39A/E, UX-49A/E UX-129A/E Plus interface A and interface B. Includes schematics, logic diagrams and complete data format information. If you have a IC-900 remote base this is the manual you need! $50 PayPal or MO. 73, Steve N4IRS
Re: [Repeater-Builder] For sale: Icom IC-900AE Service manual
Is this the same manual ? http://www.arireggioemilia.org/download/Manuali%20Radio/RADIO%20HAM%20ICOM/VEICOLARI%20ICOM/Ic-900/IC-900A_Esm.pdf 73 Glenn WB4UIV At 10:00 AM 3/30/2008, n4irs wrote: I have a VERY good condition Icom 900 service manual. The manual covers all the RF modules: UX-19A/E, UX-29A/E, UX-39A/E, UX-49A/E UX-129A/E Plus interface A and interface B. Includes schematics, logic diagrams and complete data format information. If you have a IC-900 remote base this is the manual you need! $50 PayPal or MO. 73, Steve N4IRS Yahoo! Groups Links
[Repeater-Builder] For Sale: LeBlanc Royal Tower
I am posting this for a fellow ham as he doen't have internet access. I do not own this tower and it is not in my possession. He has for sale 130 feet of guyed Baby Leblanc and Royal tower that has been taken down and is on the ground. Included are the tower guy stations and the base plate. This is commercial tower that was taken down by him. This tower is very heavy and you will have to arrange your own shipping from its current location. The tower is located in Whitby, Ontario, about 20 minutes east of Toronto, Ontario. Asking price is $500.00. If you are interested, please contact me, Eric, VA3EAM off list and I can give you his contact information. Thanks, Eric, VA3EAM.
Re: [Repeater-Builder] For Sale: RCA 500 Series UHF Repeaters
What was the freq for the forty meter net ? Also I need around 170 feet of half inch hard line or 7/8. Have you any ? Dennis kc4prd -- Original message -- From: Robin Midgett [EMAIL PROTECTED] Hi, I have several RCA UHF repeaters available for sale..cheap. These are working units removed from commercial service in 2005. Most have a Zetron controller installed in the cabinet; those can be had as an option with the repeater. Service literature is also available. These machines are old to be sure, but they're very reliable. Some say the RCA audio is second to none. I have a friend in Georgia who has several of these on the air, and prefers them to the more commonly used Motorola and G.E. gearto each his own. I'm asking $75 each for the repeaters, $175 with a Zetron controller. They need to go, I need the space. http://www.people.vanderbilt.edu/~robin.midgett/index.htm Thanks, Robin Midgett K4IDC 615-322-5836 office - rolls to pager 615-835-7699 pager 615-301-1642 home [EMAIL PROTECTED] Radio Gear For Sale: http://www.people.vanderbilt.edu/~robin.midgett/index.htm
[Repeater-Builder] For Sale: 440 TX/RX Duplexer
I have for sale a TX/RX mobile duplexer rated at 50 watts. This is the Vari-Notch type, four cavities and factory tuned to TX 448.450 and RX 443.450. The asking price is $80.00 plus $10.50 U.S. Postal Service Priority Mail shipping. If interested pix of the duplexer can be seen on the PHOTOS link on this website. Any questions please email me direct, off the list. These cans would be ideal for a portable, emergency, battery/solar powered type 440 repeater system. Thanks!! Doug W7FDF Vail, Arizona U.S.A.
[Repeater-Builder] For Sale: RCA 500 Series UHF Repeaters
Hi, I have several RCA UHF repeaters available for sale..cheap. These are working units removed from commercial service in 2005. Most have a Zetron controller installed in the cabinet; those can be had as an option with the repeater. Service literature is also available. These machines are old to be sure, but they're very reliable. Some say the RCA audio is second to none. I have a friend in Georgia who has several of these on the air, and prefers them to the more commonly used Motorola and G.E. gearto each his own. I'm asking $75 each for the repeaters, $175 with a Zetron controller. They need to go, I need the space. http://www.people.vanderbilt.edu/~robin.midgett/index.htm Thanks, Robin Midgett K4IDC 615-322-5836 office - rolls to pager 615-835-7699 pager 615-301-1642 home [EMAIL PROTECTED] Radio Gear For Sale: http://www.people.vanderbilt.edu/~robin.midgett/index.htm
[Repeater-Builder] for sale
Working ICOM RP-4020 UHF 50 Watt repeater with blown power mod. $1000.00 plus shipping 3 comspec TP-3200 repeater tone panels in 1u tri-shelf $500.00 plus shipping RLC-3 (1.80 or 2.15 I forgot which) with 3 radio cards (old style) in it and an autopatch card. $1000.00 plus shipping [EMAIL PROTECTED]
[Repeater-Builder] For Sale: 70cm/23cm FM HT - Icom IC-X2A/E (Rare)
1.2 GHz Enthusiasts - I have an extra Icom IC-X2A/E in great condition that I'd like to sell. It has two VFOs covers the 440 1.2 GHz bands simultaneously. It includes a BP-84 battery pack a cigarette lighter adaptor. The extended coverage mod has also been made. These HTs are rare sell for about $325 - 350 on eBay. If interested contact me by email or at my mobile # 847-867-2774. 73, Mark, WB9QZB Chicago, IL http://groups.yahoo.com/group/illinoisdigitalham/ Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online. http://smallbusiness.yahoo.com/webhosting
[Repeater-Builder] For sale CAT-200B repeater controller
Got for sale a CAT-200B repeater controller. Its in used but great condition, it was bought for a repeater proyect and used a few times only. I have the user manual, hardware *(except for the db-25 connector which is attach to a repeater) but you can get cheap anywhere and the controller. I am asking for $170 shipping included to continenal us only, sorry no overseas shipping. Interested send me an email off the list... 73 Miguel, ns4e
[Repeater-Builder] For Sale: Motorola MICOR series base/repeater
I recently acquired this unit and know very little about it. I know it is surplus from the University of Kentucky and it is very clean. I'm not a ham, so I don't know how to power up / test. Even if you're not interested, any info you might provide about the unit would be of great help. If you are interested, send me an email, all offers considered. The rack is located in Lexington, KY and is only available for pickup (obviously). Pictures can be seen here: www.regencycomputercenter.com/motorola.html If you would like more pictures or any other info, let me know. Thanks!
Re: [Repeater-Builder] For Sale: Motorola MICOR series base/repeater
well it is a Micor repeater 250 watt output if the tube is good. UHF 450 band - Original Message - From: burgershakes To: Repeater-Builder@yahoogroups.com Sent: Monday, June 25, 2007 2:09 PM Subject: [Repeater-Builder] For Sale: Motorola MICOR series base/repeater I recently acquired this unit and know very little about it. I know it is surplus from the University of Kentucky and it is very clean. I'm not a ham, so I don't know how to power up / test. Even if you're not interested, any info you might provide about the unit would be of great help. If you are interested, send me an email, all offers considered. The rack is located in Lexington, KY and is only available for pickup (obviously). Pictures can be seen here: www.regencycomputercenter.com/motorola.html If you would like more pictures or any other info, let me know. Thanks!
[Repeater-Builder] For Sale :Motorola Astro Saber Model II, UHF, 438-482 MHz Portable
Motorola Astro Saber Model II UHF 438-482 MHz . Astro IMBE . Comes with : Battery , Charger , Pocket Charger , Antenna , 2 Speaker Mic's . H Hand-Held/Portable 04 Astro Series R 438-482 MHz D 4.0-5.0 W F Limited Keypad, with Display 9 Variable/Programmable P Programmable W Programmable 7 Standard A Major Change Package N Standard Package Options Installed on this Flashcode: Q806/G806 IMBE / APCO-25 Digital Operation H35/G48 Conventional Operation $400 Plus SH . Thanks for Looking . Pictures Available on Request . Steve. KB3FSR [EMAIL PROTECTED]
[Repeater-Builder] For Sale - 175' of 7/8 Andrew LDF-50A (used)
Contact me off-line if interested. $250 firm. Cash only. Pick up only in Northern, NJ.
[Repeater-Builder] [For Sale] Radio Design Labs Voice Operated Switch
Got a good little project part here. A radio design labs voice operated switch. It can take line level or mice level in. One potentiomator controls sensitivity and the other controls release delay 70 to 260ms. I picked this up for a very temporary radio -- computer patch for about $95 about a month ago. Send me a personal message if your interested. Willing to part with it for around 50 shipped OBO. Manufactures info: http://www.rdlnet.com/product.php?page=155 73's KE7AKX Matt Hohman Tech Ministries New Heights Church http://www.newheights.org PH: 360.694.4985 x112 FX: 360.694.0219
Re: [Repeater-Builder] For Sale GE MVP Repeater
What do you consider reasonable? - Original Message - From: Vincent Caruso [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com; [EMAIL PROTECTED] Sent: Tuesday, January 16, 2007 9:40 PM Subject: [Repeater-Builder] For Sale GE MVP Repeater I just took out of service an MVP repeater on the 464.XXX /469.XXX it is already duplexed and wired for a Zetron model 38 controller. This radio was privately labeled for Logisticon by GE and is in a blue case with just an on off switch on the front and the mic connector on the side. It was in use until 1/12/07 and in good working condition the only reason we pulled it was to replace it with a narrow band complaint repeater. The tx was set to low power and drove a continuous duty Henry amp with no problem. Looking for reasonable offers. Make me an offer I can't refuse + shipping and it's yours If you would like pics please contact me off the list Thanks Vince Yahoo! Groups Links
Re: [Repeater-Builder] For Sale GE MVP Repeater
Information for AP-50 problem has been solved. Thank you Gary K2UQ
[Repeater-Builder] For Sale GE MVP Repeater
I just took out of service an MVP repeater on the 464.XXX /469.XXX it is already duplexed and wired for a Zetron model 38 controller. This radio was privately labeled for Logisticon by GE and is in a blue case with just an on off switch on the front and the mic connector on the side. It was in use until 1/12/07 and in good working condition the only reason we pulled it was to replace it with a narrow band complaint repeater. The tx was set to low power and drove a continuous duty Henry amp with no problem. Looking for reasonable offers. Make me an offer I can't refuse + shipping and it's yours If you would like pics please contact me off the list Thanks Vince
Re: [Repeater-Builder] For Sale GE MVP Repeater
In a message dated 1/16/2007 6:45:01 P.M. Pacific Standard Time, [EMAIL PROTECTED] writes: It was in use until 1/12/07 and in good working condition the only reason we pulled it was to replace it with a narrow band complaint repeater. If you narrow band it sufficiently, you can't even hear the complaints
Re: [Repeater-Builder] For Sale GE MVP Repeater
It wasn't a typo, I have been getting complaints since the day we changed it :) [EMAIL PROTECTED] wrote: In a message dated 1/16/2007 6:45:01 P.M. Pacific Standard Time, [EMAIL PROTECTED] writes: It was in use until 1/12/07 and in good working condition the only reason we pulled it was to replace it with a narrow band complaint repeater. If you narrow band it sufficiently, you can't even hear the complaints
Re: [Repeater-Builder] For Sale GE MVP Repeater
At 1/16/2007 19:17, you wrote: It wasn't a typo, I have been getting complaints since the day we changed it :) Why not keep the MVP repeater narrowband it? For the RX, http://com-spec.com/narrow.htm For the TX, http://www.repeater-builder.com/products/ap-50.html; set the deviation to 2.5 kHz. Bob NO6B
Re: [Repeater-Builder] For Sale GE MVP Repeater
Got a 404 Error on _http://www.repeater-builder.com/products/ap-50.html_ (http://www.repeater-builder.com/products/ap-50.html) . Would like to read that article. Getting ready to install AP-50 into Micor mobile converted to repeater. Tnx, Gary K2UQ
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
Its been awhile what Companies still make good Preamp preselectors for repeaters not overly expensive? VHF and UHF I am also looking For someone near central NJ that can reprogram a Motorola R-100 UHF repeater for me and Flat pack duplexer. I know Dont ask for a copy Of the RSS software I wont But will accept it just for this frequency programming change then loose it... HELP Neal KA2CAF
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
For Preamps try http://www.advancedreceiver.com/index1.html Neal Newman wrote: Its been awhile what Companies still make good Preamp preselectors for repeaters not overly expensive? VHF and UHF I am also looking For someone near central NJ that can reprogram a Motorola R-100 UHF repeater for me and Flat pack duplexer. I know Dont ask for a copy Of the RSS software I wont But will accept it just for this frequency programming change then loose it... HELP Neal KA2CAF Yahoo! Groups Links
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
thanks vincent for the pictures i am looking for a small uhf repeater,programmable,best would be 2 portable cabled as a repeater i dont need power where it will be located 73/s merry christmas gervais ve2ckn Original Message Follows From: Vincent Caruso [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz Date: Fri, 22 Dec 2006 16:27:42 -0500 For Preamps try http://www.advancedreceiver.com/index1.html Neal Newman wrote: Its been awhile what Companies still make good Preamp preselectors for repeaters not overly expensive? VHF and UHF I am also looking For someone near central NJ that can reprogram a Motorola R-100 UHF repeater for me and Flat pack duplexer. I know Dont ask for a copy Of the RSS software I wont But will accept it just for this frequency programming change then loose it... HELP Neal KA2CAF Yahoo! Groups Links _ Voyez vos amis en faisant un appel vidèo dans Windows Live Messenger http://imagine-msn.com/messenger/launch80/default.aspx?locale=fr-ca
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
Hey Vincent Thanks I know about ARR for preamps but Im looking for a Preselector Preamp like the old GLB units.. BTW Vincent I know your in NJ who has a GMRS repeater on 462/ 467.675. I hear and can key a machine with my HT and rubber duck. Its running PL #24 (on my icom U-16) My motorola R-100 is on that frequency Running PL#21( I am assuming its 141.3) because thats whats written Inside the machine. Because of this other repeater I want tro change frequency. this is why I asked If anyone in NJ has the RSS software so I can reprogram my machine. Thanks Neal- KA2CAF/WQEN680 Vincent Caruso wrote: For Preamps try http://www.advancedreceiver.com/index1.html Neal Newman wrote: Its been awhile what Companies still make good Preamp preselectors for repeaters not overly expensive? VHF and UHF I am also looking For someone near central NJ that can reprogram a Motorola R-100 UHF repeater for me and Flat pack duplexer. I know Dont ask for a copy Of the RSS software I wont But will accept it just for this frequency programming change then loose it... HELP Neal KA2CAF Yahoo! Groups Links mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
At 07:40 PM 12/22/06, you wrote: Hey Vincent Thanks I know about ARR for preamps but Im looking for a Preselector Preamp like the old GLB units.. Check out www.anglelinear.com Mike WA6ILQ
[Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
I have the last two spare pieces to our Midland repeaters (we just upgraded), These were kept in the shop as spares and saw very little use. For Sale 1 Midland 71 - 5051B Transmitter 450-470 MHz (puts out 5 watts to drive an amplifier) 1 Midland 71-5052B Receiver 450 - 470 MHz Both include a crystal element I have seen a few put in service in .70 cm range but have not done this personally $50.00 each + Shipping or best offer Thanks Vince
RE: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
Vince do you have any pictures? are they transmitting or just for spare parts?? 73/s gervais ve2ckn Original Message Follows From: Vincent Caruso [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: [EMAIL PROTECTED], Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz Date: Thu, 21 Dec 2006 20:07:19 -0500 I have the last two spare pieces to our Midland repeaters (we just upgraded), These were kept in the shop as spares and saw very little use. For Sale 1 Midland 71 - 5051B Transmitter 450-470 MHz (puts out 5 watts to drive an amplifier) 1 Midland 71-5052B Receiver 450 - 470 MHz Both include a crystal element I have seen a few put in service in .70 cm range but have not done this personally $50.00 each + Shipping or best offer Thanks Vince _ Achetez ce que vous voulez, quand vous voulez sur Sympatico / MSN Magasiner http://magasiner.sympatico.msn.ca/content/shp/?ctId=101,ptnrid=176,ptnrdata=081805
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
whole units for swap and runs if a site went down. I'll email you pics shortly. gervais fillion wrote: Vince do you have any pictures? are they transmitting or just for spare parts?? 73/s gervais ve2ckn Original Message Follows From: Vincent Caruso [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: [EMAIL PROTECTED], Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz Date: Thu, 21 Dec 2006 20:07:19 -0500 I have the last two spare pieces to our Midland repeaters (we just upgraded), These were kept in the shop as spares and saw very little use. For Sale 1 Midland 71 - 5051B Transmitter 450-470 MHz (puts out 5 watts to drive an amplifier) 1 Midland 71-5052B Receiver 450 - 470 MHz Both include a crystal element I have seen a few put in service in .70 cm range but have not done this personally $50.00 each + Shipping or best offer Thanks Vince _ Achetez ce que vous voulez, quand vous voulez sur Sympatico / MSN Magasiner http://magasiner.sympatico.msn.ca/content/shp/?ctId=101,ptnrid=176,ptnrdata=081805 Yahoo! Groups Links
Re: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz
Pics. a b are the transmitter c d are the receiver gervais fillion wrote: Vince do you have any pictures? are they transmitting or just for spare parts?? 73/s gervais ve2ckn Original Message Follows From: Vincent Caruso [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: [EMAIL PROTECTED], Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: [Repeater-Builder] For Sale Midland Base Tech Transmitter Receiver 450 - 470 MHz Date: Thu, 21 Dec 2006 20:07:19 -0500 I have the last two spare pieces to our Midland repeaters (we just upgraded), These were kept in the shop as spares and saw very little use. For Sale 1 Midland 71 - 5051B Transmitter 450-470 MHz (puts out 5 watts to drive an amplifier) 1 Midland 71-5052B Receiver 450 - 470 MHz Both include a crystal element I have seen a few put in service in .70 cm range but have not done this personally $50.00 each + Shipping or best offer Thanks Vince _ Achetez ce que vous voulez, quand vous voulez sur Sympatico / MSN Magasiner http://magasiner.sympatico.msn.ca/content/shp/?ctId=101,ptnrid=176,ptnrdata=081805 Yahoo! Groups Links attachment: d.jpg attachment: b.jpg attachment: a.jpg attachment: c.jpg
[Repeater-Builder] For Sale: Link Comm RLC Club Deluxe and DVR 1
Hello to the group. I have a Link Comm RLC Club Deluxe with factory rack mount enclosure and the matching Link Comm DVR 1 also in the rack mount enclosure. Both in proper working order. Asking $700 obo for the pair. Please e-mail with any questions. 73 to all.John
[Repeater-Builder] For sale VXR5000's
I have decided It was time to clean out some of my extra equipment so I am selling the following: VXR5000 VHF repeater has internal AC supply includes a RI-210 controller that is not installed.I have not tested the controller. I had purchased both of these used $600 VHR5000 UHF repeater includes RI-310 controiller installed. Does not have the internal AC supply. Also has programming cable and software. I purchased all of this new. $800 Both have no known problems. Few scratches on outside from moving around . They were my backup repeaters. I never put the VHF on the air except to make sure it worked when I bought it. Both have manuals for the repeater and controller. I can send pictures. Let me know if you need further info. Prices plus actual shipping. Please contact direct dwieck(at)bellsouth(dot)net Thanks Dennis N4ZKR Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] For Sale: Cushman CE-6 and CE-6a Service Monitors- Need Repairs
Hello to the group. I have two Cushman Service Monitors that are sick and have to go. For starters I have a CE-6a that has a lock problem and will only lock between 460 and 470 Mhz. This unit has the Model 316 VHF 140-175 Mhz high sensitivity preselctor. The second unit is a CE-6 with what appears to be a high voltage power supply problem. This unit has the Model 303 Broadband mixer. The CE-6a served me well for years, but is just taking up space now along with its forlorn brother and both need to go. I also have a set of service manuals for the CE-6 as well as some of the plug-in manuals too. These things most likely still have some life in them if someone had the moxie to fix them. Perhaps one from two? Pickup would be mandatory, but I would be willing to drive an hour or so if someone was serious. I am near Sacramento CA. I will accept any reasonable offer. Please reply off-list. Thanks, John Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
$65 Grand or $65.00 ? yeouch! Jim McLaughlin wrote: From an estate: Motorola SINAD meter. Model R1013A. Perfect condition and I'm told never used. With manual and original box which is falling apart. Great for tuning up those receivers. $65.000 and I'll ship to lower 48 states. Tnx Kevin for the permission. Jim McLaughlin WA9FPT [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale - OT, hopefully the end
I never cease to be amazed by the number of people whom don't understand that the PERIOD is the important thing here and that it was in the correct place. If you go to buy gasoline and it's $2.579 per gallon, do you really think it's two thousand five hundred and seventy nine dollars a gallon? Geez! Sorry for the off-topic, but I couldn't stand it anymore. Chuck - Original Message - From: Jim McLaughlin [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, August 23, 2005 9:27 PM Subject: Re: [Repeater-Builder] For Sale Don't worry yourself about it as it's sold anyway. Jim - Original Message - From: Mark A. Holman [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, August 23, 2005 19:13 PM Subject: Re: [Repeater-Builder] For Sale $65 Grand or $65.00 ? yeouch! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale - OT, hopefully the end
At 09:59 PM 8/23/2005 -0400, you wrote: I never cease to be amazed by the number of people whom don't understand that the PERIOD is the important thing here and that it was in the correct place. ---I suspect most pre-menopausal women certainly know this! Ken (sorry, couldn't resist...) Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] For Sale - OT, hopefully the end
Oh, ummm... isn't that the same as a comma? GRIN Richard -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Chuck Kelsey Sent: Tuesday, August 23, 2005 6:59 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] For Sale - OT, hopefully the end I never cease to be amazed by the number of people whom don't understand that the PERIOD is the important thing here and that it was in the correct place. If you go to buy gasoline and it's $2.579 per gallon, do you really think it's two thousand five hundred and seventy nine dollars a gallon? Geez! Sorry for the off-topic, but I couldn't stand it anymore. Chuck - Original Message - From: Jim McLaughlin [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, August 23, 2005 9:27 PM Subject: Re: [Repeater-Builder] For Sale Don't worry yourself about it as it's sold anyway. Jim - Original Message - From: Mark A. Holman [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, August 23, 2005 19:13 PM Subject: Re: [Repeater-Builder] For Sale $65 Grand or $65.00 ? yeouch! Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale - OT, hopefully the end
An education . 65.000 in europe and many central american countries would mean sixty five thousand dollars, in the US, it is still just sixty five dollars. I am sure that this list has many folks on it that are not from the US ... so giving these folks the benefit of the doubt. James Richard wrote: Oh, ummm... isn't that the same as a comma? GRIN Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] For Sale
From an estate: Motorola SINAD meter. Model R1013A. Perfect condition and I'm told never used. With manual and original box which is falling apart. Great for tuning up those receivers. $65.000 and I'll ship to lower 48 states. Tnx Kevin for the permission. Jim McLaughlin WA9FPT [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
OK. You certainly have a right to an opinion. I received a price range from Kevin and it seemed fair to me. Thanks for your interest though. Jim - Original Message - From: Kevin Berlen, K9HX [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, August 22, 2005 21:13 PM Subject: Re: [Repeater-Builder] For Sale $65,000?? seems a BIT high to me!! :^) 73, Kevin, K9HX At 08:29 PM 8/22/2005, you wrote: From an estate: Motorola SINAD meter. Model R1013A. Perfect condition and I'm told never used. With manual and original box which is falling apart. Great for tuning up those receivers. $65.000 and I'll ship to lower 48 states. Tnx Kevin for the permission. Jim McLaughlin WA9FPT [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
I am sure you are not asking sixty five thousand dollars for your meter. Just trying to have a little fun with your typo. 73, Kevin, K9HX At 09:27 PM 8/22/2005, you wrote: OK. You certainly have a right to an opinion. I received a price range from Kevin and it seemed fair to me. Thanks for your interest though. Jim - Original Message - From: Kevin Berlen, K9HX [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, August 22, 2005 21:13 PM Subject: Re: [Repeater-Builder] For Sale $65,000?? seems a BIT high to me!! :^) 73, Kevin, K9HX At 08:29 PM 8/22/2005, you wrote: From an estate: Motorola SINAD meter. Model R1013A. Perfect condition and I'm told never used. With manual and original box which is falling apart. Great for tuning up those receivers. $65.000 and I'll ship to lower 48 states. Tnx Kevin for the permission. Jim McLaughlin WA9FPT [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] For Sale
Looks like a good price to me. $69.00 at http://www.epcom.net/PDF/specials/new-merchandise.pdf Wayne, AI9Q -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Berlen, K9HX Sent: Monday, August 22, 2005 7:13 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] For Sale $65,000?? seems a BIT high to me!! :^) 73, Kevin, K9HX At 08:29 PM 8/22/2005, you wrote: From an estate: Motorola SINAD meter. Model R1013A. Perfect condition and I'm told never used. With manual and original box which is falling apart. Great for tuning up those receivers. $65.000 and I'll ship to lower 48 states. Tnx Kevin for the permission. Jim McLaughlin WA9FPT [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005 Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] For Sale: Two Mitreks
Hi Guys, I don't post much but I have been building some repeaters and now have some spare units I would like to sell for Dayton cash :o) 1. VHF High Band Mitrek mobile, low power model, with freq. elements. I have not tested this unit, but the person I bought it from claims it was working fine. The front label has been removed so I do not know the actual model number or serial. Comes with PL deck HLN4020A. Its a little dusty but about a 8/10. No acessories, just the radio. Asking $50 for or best offer. 2. VHF Low Band Mitrek Mobile, high power model with freq. elements. Model: T81JJA4000AK Serial: 433HEE4237 According to several web sources, looks like it will do 6M. Comes with PL deck HLN4020A. I have not tested this unit, but the person I bought it from claims it was working fine. Its a little dusty but about a 9/10. No acessories, just the radio. Asking $50 for or best offer. I will ship UPS and will let whoever would like them know shipping cost as soon as I get their zipcode. Thanks, please email any questions off-list to jason @ ke4nyv.com (take out the spaces) Jason KE4NYV www.ke4nyv.com RPC Electronics www.rpc-electronics.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] FOR SALE LIST
I need to sell the following items due to lack of income.Please reply direct,NOT TO LIST! 1) GE MastrII VHF 110watt cont.duty base station/repeater in 4 foot cabinet with GE 30 amp power supply,crystalled and tuned to 146.10/.70 $600 2) GE MastrII VHF 110 watt mobile to repeater conversion,currently on 146.04/.64 $275 3) GE MastrII UHF 75 watt base/repeater with preamp and Sinclair duplexer, currently in service on 443.375/448.375.No cabinet or power supply $800 4) GE MastrII UHF 75 watt mobile to repeater conversion,currently on 444.5/449.5 w/preamp and mobile duplexer $325 5) GE ExecII UHF base station w/mic and CG on 463mhz $125 6) GE Personal Radio Test Adapter 4EX12A12 $40 7) GE MastrII 110 watt mobile VHF power amp,4 transistor model $145 8) GE MLS-II scanning mobile on 10 meters $100 9) AOR AR-3000 2gig all mode scanner,PC controllable,nice! $450 10) Cushman CE-5 Service Monitor with broadband mixer and deviation meter. $350 11) IFR FM/AM 1000A service monitor,no battery. $1000 12) GE ExecII mobile cross band VHF to UHF set up as remote receiver in ham bands with 1P controller,CG and preamp. $175 could be UHF repeater easily. 13) GE MastrII base station chassis,10m rx,UHF exciter,no PA. $125 14) GE MastrIIE UHF second receiver and systems board only. $100 15) MCS PA-100 repeater power amp and power supply,blown final. $80 All prices plus shipping,US funds. PLEASE REPLY DIRECT ONLY to: res0s7ndatverizondotnet Thanks for looking! Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] For Sale or For Trade
For sale or for trade. Due to a repeater changing frequency I have a spare Micor RX element (KXN1024) set up on 440.600mhz. It was rebuilt and temp-comp'd by International Crystal. Mike WA6ILQ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] FOR SALE: GE MASTR II 800/900Mhz PA
Hi Dave; Sorry for the delay, I was called out of town! Do you still have this amp? And is it still $40.00 including shipping? Thanks, Bill PS: Please forward me your PayPal address for payment! Dave wrote: I have a clean GE MASTR II PA for sale: P/N 19D430488G2 Rev D 851 to 870Mhz 35W Has a 2ft input lead of coax with a 90 deg BNC connector and an N output connector on the heatsink. Also has roughly 2ft of power leads. Might be of use for someone to convert and use on the 900Mhz ham band. FREE SHIPPING when paying via Paypal Asking $40 Thanks Dave / N9NLU Kewaskum, WI [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] FOR SALE: GE MASTR II 800/900Mhz PA
I have a clean GE MASTR II PA for sale: P/N 19D430488G2 Rev D 851 to 870Mhz 35W Has a 2ft input lead of coax with a 90 deg BNC connector and an N output connector on the heatsink. Also has roughly 2ft of power leads. Might be of use for someone to convert and use on the 900Mhz ham band. FREE SHIPPING when paying via Paypal Asking $40 Thanks Dave / N9NLU Kewaskum, WI [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
I looked the call up @ E-ham this is what I have eHam.net Home | FAQ | Log In Help! | Welcome AnonymousBecome a member! or Login! Call Search Dayton 2004 Photos New to Ham Radio? My eHam Profile Email Subscriptions Community Articles Forums Friends Remembered Speak Out Strays Survey Question Operating Contesting DX Cluster Spots Propagation Resources Calendar Callbook Classifieds Ham Exams Ham Links List Archives News Articles Product Reviews QSL Managers Discount Books Site Info About eHam.net eHam Help (FAQ) Vision Statement eHam Team Help Wanted Advertising Info QSL Managers Ham Links eHam.net Callbook | Search Results Results Thanks to QRZ.com! KB2WMP Clarence J Newbold 1304 Pennsylvania Ave Manasquan, NJ 08736 I deleted his email address 4 secuirity reasons spam bots ! Mark License Other Info License Class: General Special License Code: Individual County: Monmouth Latitude: 40.121406 Longitude: -74.061987 Telelphone Area Code: 732 Time Zone: Eastern Effective Date: 2004-02-17 Expiration Date: 2005-12-04 Lookups: 183 Copyright 2000-2004 eHam.net, LLC eHam.net is a community web site for amateur (ham) radio operators around the world. Contact [EMAIL PROTECTED] with comments or questions. Site Privacy Statement This web site is hosted created by AkornHosting.com Mark Holman let the spam bots go figgure. - Original Message - From: Jim Newbold [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 5:33 PM Subject: Re: [Repeater-Builder] For Sale I assure you i am in QRZ. KB2WMP - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 3:50 PM Subject: Re: [Repeater-Builder] For Sale Your callsign a typo? KB2WMP not in QRZ.com listing Yahoo! Groups Links --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/2004 Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
I under stand a Happy Birthday is in order for Clarence J. Newbold. He will be 32 on Tuesday. Daniel Mark Holman wrote: He is listed on Buckmaster , FCC Database, Eham as I posted Earlier, well what do you know on their late updating he's on QRZ dot com, I was wondering was that a CD Rom you people were referencing to ? just did a tonight search hope this solves the big mystery. Mark Holman let the spam bots go figgure. - Original Message - From: Jim Newbold [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 5:33 PM Subject: Re: [Repeater-Builder] For Sale I assure you i am in QRZ. KB2WMP - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 3:50 PM Subject: Re: [Repeater-Builder] For Sale Your callsign a typo? KB2WMP not in QRZ.com listing Yahoo! Groups Links --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/2004 Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
He is listed on Buckmaster , FCC Database, Eham as I posted Earlier, well what do you know on their late updating he's on QRZ dot com, I was wondering was that a CD Rom you people were referencing to ? just did a tonight search hope this solves the big mystery. Mark Holman let the spam bots go figgure. - Original Message - From: Jim Newbold [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 5:33 PM Subject: Re: [Repeater-Builder] For Sale I assure you i am in QRZ. KB2WMP - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 3:50 PM Subject: Re: [Repeater-Builder] For Sale Your callsign a typo? KB2WMP not in QRZ.com listing Yahoo! Groups Links --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/2004 Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] For Sale
Jim, I'm interested in some 19 inch rack mount fan units; are the fans mounted horizontal or vertical ?? What are you asking for each unit ?? Rob -Original Message- From: Jim [mailto:[EMAIL PROTECTED] Sent: Sunday, August 22, 2004 11:42 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] For Sale I am abandoning my repeater project. My loss = your gain. These items are not on Ebay yet, and i hope not to have to. I have for sale the following items: 19 Rack mount fan tray - 4 Heavy Duty 172x51mm Cooling fans 260cfm each. AC powered 19 Rack mount fan tray - 6 Fans I believe they are 70cfm each. AC powered 19' Rack mount Quintron Monitor panel w/ Telewave UHF power monitor Wacom WP-678 UHF Duplexer Regency MCCU017R UHF Repeater /w 40watt Amp, Norcomm NC103 tone board, RC1000 Controller Motorola Micor TLE-1317A 100watt UHF Amplifier 19 Rack mount Telewave 300watt UHF Isolator All reasonable offers will be considered. First come first serve. Please email me off of the list if you are interested. Jim KB2WMP Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] For Sale
I am abandoning my repeater project. My loss = your gain. These items are not on Ebay yet, and i hope not to have to. I have for sale the following items: 19 Rack mount fan tray 4 Heavy Duty 172x51mm Cooling fans 260cfm each. AC powered 19 Rack mount fan tray 6 Fans I believe they are 70cfm each. AC powered 19' Rack mount Quintron Monitor panel w/ Telewave UHF power monitor Wacom WP-678 UHF Duplexer Regency MCCU017R UHF Repeater /w 40watt Amp, Norcomm NC103 tone board, RC1000 Controller Motorola Micor TLE-1317A 100watt UHF Amplifier 19 Rack mount Telewave 300watt UHF Isolator All reasonable offers will be considered. First come first serve. Please email me off of the list if you are interested. Jim KB2WMP Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
[EMAIL PROTECTED] wrote: Your callsign a typo? KB2WMP not in QRZ.com listing QRZ is out to lunch. Look him up on buck, he's okay: http://www.buck.com/cgi-bin/do_hamcall Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] For Sale
I assure you i am in QRZ. KB2WMP - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 22, 2004 3:50 PM Subject: Re: [Repeater-Builder] For Sale Your callsign a typo? KB2WMP not in QRZ.com listing Yahoo! Groups Links --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/2004 Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] garage sale special
ICOMS are the elements that hold the crystal in GE radios - they aren't Icom radios. ICOMS come in 2C (2 ppm), 5C (5 ppm), and EC (External Compensation). Joe M. Mike wrote: what are the uhf mc65kfu88? with 2 icom radios? are they crystal or programmable. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/