[Repeater-Builder] Master 2 and DCS
hi all my master 2 repeater has a tone of 141.3 hz. i remember that when i programm my Phoenix i can setup a DCS tone ,Digital code. Is there a board that you slot into the Master 2 so it could use a DCS ? thanks Gervais ve2ckn
Re: [Repeater-Builder] Master 2 and DCS
There used to be an add on board from Comm Spec that could add DCS/DCG/DPL to a suitable radio. Many aftermarket repeater controllers can do DCG/DCS. DCS modulation needs to be sent into a varactor modulator stage... Direct FM exciters on Mastr II can do it native on the CTCSS port... Older Phase Modulated exciters need to be handled differently... Injecting DCS on the compensation line is a suitable possibility . The suggested discriminator pickoff for DCS is a point in the rx in front of Volume Sq Hi... so best to pick it off with a separate wire. Doug KD8B gervais wrote: hi all my master 2 repeater has a tone of 141.3 hz. i remember that when i programm my Phoenix i can setup a DCS tone ,Digital code. Is there a board that you slot into the Master 2 so it could use a DCS ? thanks Gervais ve2ckn Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: repeater-builder-dig...@yahoogroups.com repeater-builder-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: repeater-builder-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Master 2 and DCS
humm Doug i thaught it would simpler for me too install this board,,, i wonder if the little TKR-720 of Kenwood can do DCS??? Thanks for your observation gervais ve2ckn -- From: Doug Bade k...@thebades.net Sent: Saturday, February 06, 2010 3:04 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Master 2 and DCS There used to be an add on board from Comm Spec that could add DCS/DCG/DPL to a suitable radio. Many aftermarket repeater controllers can do DCG/DCS. DCS modulation needs to be sent into a varactor modulator stage... Direct FM exciters on Mastr II can do it native on the CTCSS port... Older Phase Modulated exciters need to be handled differently... Injecting DCS on the compensation line is a suitable possibility . The suggested discriminator pickoff for DCS is a point in the rx in front of Volume Sq Hi... so best to pick it off with a separate wire. Doug KD8B gervais wrote: hi all my master 2 repeater has a tone of 141.3 hz. i remember that when i programm my Phoenix i can setup a DCS tone ,Digital code. Is there a board that you slot into the Master 2 so it could use a DCS ? thanks Gervais ve2ckn Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: repeater-builder-dig...@yahoogroups.com repeater-builder-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: repeater-builder-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Master 2 and DCS
HI all well i womder if someone outhere ever install an DCS tone board into a master 2??? replacing the standard encore-decode board i want to switch my M2 to Digital coding thanks for the help Merry christmas gervais ve2ckn