I have a couple of the earlier TEK-5 metering panels ... when
the Micor test modification is installed, there is, I believe, a
five position rotary switch in place of the 0-10 / 0-20 VDC meter
on the lower left hand corner of the earlier panel.
You might try different positions of this switch to obtain the
meter polarity reversal you need.
BTW, I haven't studied either of my TEK-5 metering panels or the
associated manuals to determine a correct answer for your question.
Batteries not included / your mileage may vary / smoke test to be
performed after the 11 o'clock news.
Hope this helps,
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Motorola TEK-5E test set, slightly OTT
Date: Fri, 17 Mar 2006 22:33:32 -
Greetings to the group,
I was trying to tune some Mitrek rcvr's. using the service manual
procedure and a TEK-5E test set ( big box with 8 meters on it). The
Mitrek manual says to set meters 1 and 2 to reverse for some of the
tuning steps. Now my problem, there is NO reverse switch on this
test set, even though the manual says it is one that can be used for
Mitreks. I was used the C setting an the selector switch, should I
have used the A setting instead ? The manual implies that you flip
a forward /reverse switch on the test set.
My question is simple. What is the simplest to provide the reverse
meter readings for meters 1 2 in this peice of gear. drill the box
and install a series of DpDT swicths for each of the required meters
or are there any other solutions out there.
TIA for any helpful info.
Doug N3DAB
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
