I see that your IDer is a model 1300 and mine are model 700, however, I
received this reply from one of Racom's people that may be helpful with
reprogramming any of Racom's IDers:
Snip.
Good Afternoon Jim:
Thank you for the e-mail and your interests in Racom Products.
Generally speaking all of the model 700's can be reprogrammed
in the field via a PC. However, over the years the circuit boards
used in the 700's have changed. Which means a programming
kit for one unit might not work on another. If you would remove
the lid of each unit and send me the board number its PROM
number I can match up the programming kits ( disk and cable )
needed and match up the correct Service Manuals for each.
Or, you could send them to us and we can reprogram all of them.
Basically, the cost of a programming kit is: $24.00, factory pro-
gramming is: $19.000 and a Service Manual is $10.00, plus the
cost of shipping, handling and insurance.
If you have any questions please give me a call, thanks again and
have a good day.
Sincerely,
John M. Dukovich
j...@racominc.com
Racom Products
800-722-6664
www.racominc.com
2024 West Schaaf Road
Cleveland, Ohio 44109 USA
.Snip
73, Jim
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of mzfb2001
Sent: Sunday, May 23, 2010 2:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Racom Station Identifier
Hi all
I have a Racom 1300 morse code station Identifier. I am looking to see if
there is a way to reprogram the Prom in the unit. The company is no longer
active. The prom contains the call sign information. I know I could throw it
in the trash and buy something new but I hate doing that when all it would
take is to reprogram the Prom. Is there a way to read the prom and then
change the information in it and then program a new prom provided I can find
a new one.
Thanks in advance
Mike
