[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[Joe Burkleo]

Paul,
Our unit was a older version that used a bipolar device as Skipp had
mentioned.

It made more sense for us to replace the obsolete device with the new
updated board.

I think the price was around $375. I have it written down at work.

Joe 


--- In Repeater-Builder@yahoogroups.com, "Paul Finch" <[EMAIL PROTECTED]>
wrote:
>
> Joe,
> 
> If you don't mind me asking, how much was the board?
> 
> Paul
> WB5IDM
> 

[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[skipp025]

Must be some type of top secret information that can't be 
shared with the group...  

:-/ 

s. 

> >Anyone know the correct part number and a source for the FET's that
> >Telelwave uses in their TWR series of multicouplers for 150 and 450?
 
> 

RE: [Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[Paul Finch]

Joe,

If you don't mind me asking, how much was the board?

Paul
WB5IDM

 

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Joe Burkleo
Sent: Thursday, August 07, 2008 10:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Source for Telewave Multicoupler FET's

Ken,
As always, thanks a lot.

Russ, KD7IOP gave Telewave a call after I talked to you, and it looks
like we are just going to put one of the new updated preamp boards in
our VHF unit that is down.

Russ did find out that the preamp board is 50 ohms in and out, so in
an emergency, one could get creative if needed.

73,
Joe - WA7JAW


--- In Repeater-Builder@yahoogroups.com, Ken Arck <[EMAIL PROTECTED]> wrote:
>
> At 04:13 PM 8/6/2008, Joe Burkleo wrote:
> 
> >Anyone know the correct part number and a source for the FET's that
> >Telelwave uses in their TWR series of multicouplers for 150 and 450?
> 
> <Joe, I have info for you. Give me a call.
> 
> Ken
> 
> 
>

--
> President and CTO - Arcom Communications
> Makers of repeater controllers and accessories.
> http://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp.net
> "We don't just make 'em. We use 'em!"
>







Yahoo! Groups Links




No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.526 / Virus Database: 270.5.12/1599 - Release Date: 8/7/2008
8:49 PM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.526 / Virus Database: 270.5.12/1599 - Release Date: 8/7/2008
8:49 PM
 






Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:[EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[Joe Burkleo]

Ken,
As always, thanks a lot.

Russ, KD7IOP gave Telewave a call after I talked to you, and it looks
like we are just going to put one of the new updated preamp boards in
our VHF unit that is down.

Russ did find out that the preamp board is 50 ohms in and out, so in
an emergency, one could get creative if needed.

73,
Joe - WA7JAW


--- In Repeater-Builder@yahoogroups.com, Ken Arck <[EMAIL PROTECTED]> wrote:
>
> At 04:13 PM 8/6/2008, Joe Burkleo wrote:
> 
> >Anyone know the correct part number and a source for the FET's that
> >Telelwave uses in their TWR series of multicouplers for 150 and 450?
> 
>  
> Ken
> 
> 
>
--
> President and CTO - Arcom Communications
> Makers of repeater controllers and accessories.
> http://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp.net
> "We don't just make 'em. We use 'em!"
>

[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[Joe Burkleo]

Skipp and Ken,
Thanks for the info. 

The unit that is in need of a new device is a TWR8-150. Not sure of
the vintage. It is most likely at least 5 years old.

Thanks,
Joe

--- In Repeater-Builder@yahoogroups.com, "skipp025" <[EMAIL PROTECTED]> wrote:
>
> 
> I'm also a Telewave Dealer... 
> 
> The answer depends on the generation/age and specific 
> model of your Telewave Multi-coupler. Some have/had bipolar 
> transistors, some had special what I call quasi low noise 
> FET type devices and I believe some of the newer Telewave 
> Preamps should now be using Phempt devices. 
> 
> Your best bet would be to open it up and snap a picture to 
> share with whom ever helps you find the replacement device. 
> 
> cheers, 
> skipp 
> 
> skipp025 at yahoo.com 
> 
> > "Joe Burkleo"  wrote:
> >
> > Anyone know the correct part number and a source for the FET's that
> > Telelwave uses in their TWR series of multicouplers for 150 and 450?
> > 
> > Thanks,
> > Joe - WA7JAW
> >
>

[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[skipp025]

I'm also a Telewave Dealer... 

The answer depends on the generation/age and specific 
model of your Telewave Multi-coupler. Some have/had bipolar 
transistors, some had special what I call quasi low noise 
FET type devices and I believe some of the newer Telewave 
Preamps should now be using Phempt devices. 

Your best bet would be to open it up and snap a picture to 
share with whom ever helps you find the replacement device. 

cheers, 
skipp 

skipp025 at yahoo.com 

> "Joe Burkleo" <[EMAIL PROTECTED]> wrote:
>
> Anyone know the correct part number and a source for the FET's that
> Telelwave uses in their TWR series of multicouplers for 150 and 450?
> 
> Thanks,
> Joe - WA7JAW
>

[Repeater-Builder] Re: Source for Telewave Multicoupler FET's

[Joe Burkleo]

Ken,
Thanks a lot.
I will give you a call when I get a chance.

Joe - WA7JAW

--- In Repeater-Builder@yahoogroups.com, Ken Arck <[EMAIL PROTECTED]> wrote:
>
> At 04:13 PM 8/6/2008, Joe Burkleo wrote:
> 
> >Anyone know the correct part number and a source for the FET's that
> >Telelwave uses in their TWR series of multicouplers for 150 and 450?
> 
> <---As a Telewave Dealer, I'll check for you tomorrow, Joe
> 
> Ken
>
--
> President and CTO - Arcom Communications
> Makers of repeater controllers and accessories.
> http://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp.net
> "We don't just make 'em. We use 'em!"
>