Re: [Repeater-Builder] TKR-850 PL on COS
It's towers not tower on the address so send to [EMAIL PROTECTED] this should work for you with the right address 73, Russ - Original Message - From: Phil Hebert To: Repeater-Builder@yahoogroups.com Sent: Thursday, June 09, 2005 9:13 AM Subject: RE: [Repeater-Builder] TKR-850 PL on COS - The following addresses had permanent fatal errors - <[EMAIL PROTECTED]> - Transcript of session follows - ... while talking to air-xn04.mail.aol.com.: >>> RCPT To:<[EMAIL PROTECTED]> <<< 550 MAILBOX NOT FOUND 550 <[EMAIL PROTECTED]>... User unknown -Original Message-From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of RussSent: Thursday, June 09, 2005 7:19 AMTo: Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder] TKR-850 PL on COS If you write to Dean or Kathy over at Cook they have a sheet they send out that tells you how to hook up a controller to the Kenwood TKR repeaters that works well. I used it on all 4 of my repeaters. ([EMAIL PROTECTED]) I think they can just e-mail it to you they are real good about this stuff. They help every one. Very best of 73, Russ, W3CH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] TKR-850 PL on COS
At 07:21 AM 6/9/2005 -0400, you wrote: >The pin is TOR or tone on receive. (pin-24)To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] TKR-850 PL on COS
- The following addresses had permanent fatal errors - <[EMAIL PROTECTED]> - Transcript of session follows - ... while talking to air-xn04.mail.aol.com.: >>> RCPT To:<[EMAIL PROTECTED]> <<< 550 MAILBOX NOT FOUND 550 <[EMAIL PROTECTED]>... User unknown -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Russ Sent: Thursday, June 09, 2005 7:19 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] TKR-850 PL on COS If you write to Dean or Kathy over at Cook they have a sheet they send out that tells you how to hook up a controller to the Kenwood TKR repeaters that works well. I used it on all 4 of my repeaters. ([EMAIL PROTECTED]) I think they can just e-mail it to you they are real good about this stuff. They help every one. Very best of 73, Russ, W3CH Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] TKR-850 PL on COS
If you write to Dean or Kathy over at Cook they have a sheet they send out that tells you how to hook up a controller to the Kenwood TKR repeaters that works well. I used it on all 4 of my repeaters. ([EMAIL PROTECTED]) I think they can just e-mail it to you they are real good about this stuff. They help every one. Very best of 73, Russ, W3CH - Original Message - From: Richard D. Reese To: Repeater-Builder@yahoogroups.com Sent: Wednesday, June 08, 2005 10:55 PM Subject: [Repeater-Builder] TKR-850 PL on COS I have a TKR-850 that is hooked to an external controller (Link Comm. RLC-3) and I want to have CTCSS on COR. Anyone know where to connect to mute the sub-audible tone generated in the TKR-850? I would like to retain the internal CTCSS. It currently encodes continuously and see no programming ability to do anything but continuously or none at all..I have the service manual but thought someone could save me some time and effort locating the spot.Thanks in advance. Richard D. Reesehttp://www.wa8dbw.ifip.com Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] TKR-850 PL on COS
The pin is TOR or tone on receive. (pin-24) - Original Message - From: "Ken Arck" <[EMAIL PROTECTED]> To: Sent: Thursday, June 09, 2005 12:09 AM Subject: Re: [Repeater-Builder] TKR-850 PL on COS > At 08:44 PM 6/8/2005 -0700, you wrote: > > Look in the software :optional features,AUX inputs; there is Aux In pins > that you program diferent actions, program one for QT/DQT encode > enable/disable and control it with one of the output lines of the RLC-3 > > <---Sorry but that won't work. Kenwood's CTCSS is done in DSP and, even in > Version 2 repeaters, you cannot change the encode status while the > transmitter is active. In other words, you can allow or disallow encode > only at the beginning of that transmission. > > Kinda sucks actually... the way around this is to use an external encoder > and not to program any CTCSS (QT) encode within the Kenwood at all. Then > you can feed the external encoder's output into pin 8 (the Tx Data input) > of the DB25 on the back. You can then control that external decoder with > whatever... > > Ken > > -- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > It was great to meet many of you at Dayton 2005! > We offer complete Kenwood TKR repeater packages! > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] TKR-850 PL on COS
At 08:44 PM 6/8/2005 -0700, you wrote: Look in the software :optional features,AUX inputs; there is Aux In pins that you program diferent actions, program one for QT/DQT encode enable/disable and control it with one of the output lines of the RLC-3 <---Sorry but that won't work. Kenwood's CTCSS is done in DSP and, even in Version 2 repeaters, you cannot change the encode status while the transmitter is active. In other words, you can allow or disallow encode only at the beginning of that transmission. Kinda sucks actually... the way around this is to use an external encoder and not to program any CTCSS (QT) encode within the Kenwood at all. Then you can feed the external encoder's output into pin 8 (the Tx Data input) of the DB25 on the back. You can then control that external decoder with whatever... Ken -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html It was great to meet many of you at Dayton 2005! We offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] TKR-850 PL on COS
Look in the software :optional features,AUX inputs; there is Aux In pins that you program diferent actions, program one for QT/DQT encode enable/disable and control it with one of the output lines of the RLC-3 ( look page J-1 of the manual ); by the way my manual has two errors there: 056 500 093 1 there is a missing 1 at the end ( board 1 ) 157 48 500 there is a missing 0 before the 48 Do you have a manual for the TKR-850 Hope this helps. Juan - Original Message - From: Richard D. Reese To: Repeater-Builder@yahoogroups.com Sent: Wednesday, June 08, 2005 7:55 PM Subject: [Repeater-Builder] TKR-850 PL on COS I have a TKR-850 that is hooked to an external controller (Link Comm. RLC-3) and I want to have CTCSS on COR. Anyone know where to connect to mute the sub-audible tone generated in the TKR-850? I would like to retain the internal CTCSS. It currently encodes continuously and see no programming ability to do anything but continuously or none at all..I have the service manual but thought someone could save me some time and effort locating the spot.Thanks in advance. Richard D. Reesehttp://www.wa8dbw.ifip.com Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] TKR-850 PL on COS
I have a TKR-850 that is hooked to an external controller (Link Comm. RLC-3) and I want to have CTCSS on COR. Anyone know where to connect to mute the sub-audible tone generated in the TKR-850? I would like to retain the internal CTCSS. It currently encodes continuously and see no programming ability to do anything but continuously or none at all..I have the service manual but thought someone could save me some time and effort locating the spot.Thanks in advance. Richard D. Reesehttp://www.wa8dbw.ifip.com Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
