[Repeater-Builder] remote head ?

2009-10-26 Thread David 
Hi Everyone, i have a remote head fm828/25 A/R MK2 radio with a remote
head that i hope to use as a repeater there are two sockets on the back of the 
radio one has a red strip around it what socket do i plug the remote head into 
to see if the radio work's  ??...Rgs David  VK4DJC.

Re: [Repeater-Builder] remote head ?

2009-10-26 Thread Don Crutcher 
Hello David

On the remote head there are usually 2 cables, 1 red and 1 black.
The Black is the remote mike, volume, mute, on/off, the Red is the channel 
change.
Plug the Red 10 pin WIST plug into the Red socket and the Black into the Black 
socket.

Set the channel switch on the remote to the channel that you have the TX and RX 
crystals installed in.

The circuit is usually in the rear of the FM-828 handbook.

Regards
Don vk2zcz

  - Original Message - 
  From: David 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Monday, October 26, 2009 5:14 PM
  Subject: [Repeater-Builder] remote head ?


Hi Everyone, i have a remote head fm828/25 A/R MK2 radio with a remote
  head that i hope to use as a repeater there are two sockets on the back of 
the radio one has a red strip around it what socket do i plug the remote head 
into to see if the radio work's ??...Rgs David VK4DJC.