Re: [Repeater-Builder] Re: M1225 programming problem
Hi James Your link to me to a batwings discussion on jedi mics. Do you have another? I checked the cable diagram (http://batlabs.com/images/maxpin.gif) again and see that what looks like a jumper between pins 11 and 4 may actually be a 1.7V power source. I've just used a jumper in the past and had no problems programming my P1225s. Can I connect 1.5V DC wall blob to these pins without frying anything? --jeff At 04:23 PM 2/7/2009, crackedofn0de wrote: --- In mailto:Repeater-Builder%40yahoogroups.comRepeater-Builder@yahoogroups.com, Jeff Clark je...@... wrote: Hope this is the correct group for this kind of question. I'm trying to program two m1225 UHF mobiles with a Polaris PA-II rib and a cable assembled per the batlabs cable page (listed same as GM300). I've checked and double checked the connections on both ends and made sure the tab on the rj45 end is oriented according to the diagram, but when I plug it in to the mic jack and turn on the rib, the radio keys up and stays keyed until I kill the power or pull the plug. I've tried this on both radios with the same result, and I've programmed my P1225s with the same rib, so I'm wondering if the pinout on the rj45 jack is wrong. Are there additional pinouts beside the one listed on the batlabs page? thanks, --jeff, kf6bkg The diagram on batlabs is a little screwy. I started a big ugly thread on this years ago: http://batboard.batlabs.com/viewtopic.php?t=5955http://batboard.batlabs.com/viewtopic.php?t=5955 James K7ICU
RE: [Repeater-Builder] Re: M1225 programming problem
James, What is screwy about the diagram? Other than not clearly identifying pins 4 and 7, it is correct. The linked forum item does not address the mike connector numbering. I don't see the connection. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of crackedofn0de Sent: Saturday, February 07, 2009 4:24 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: M1225 programming problem --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , Jeff Clark je...@... wrote: Hope this is the correct group for this kind of question. I'm trying to program two m1225 UHF mobiles with a Polaris PA-II rib and a cable assembled per the batlabs cable page (listed same as GM300). I've checked and double checked the connections on both ends and made sure the tab on the rj45 end is oriented according to the diagram, but when I plug it in to the mic jack and turn on the rib, the radio keys up and stays keyed until I kill the power or pull the plug. I've tried this on both radios with the same result, and I've programmed my P1225s with the same rib, so I'm wondering if the pinout on the rj45 jack is wrong. Are there additional pinouts beside the one listed on the batlabs page? thanks, --jeff, kf6bkg The diagram on batlabs is a little screwy. I started a big ugly thread on this years ago: http://batboard.batlabs.com/viewtopic.php?t=5955 http://batboard.batlabs.com/viewtopic.php?t=5955 James K7ICU