Re: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
Dave VanHorn wrote: > --- In Repeater-Builder@yahoogroups.com, "Juan Tellez" <[EMAIL PROTECTED]> > wrote: >> >> The one with two splits was the TK-710, the 720 can be programed to > full >> bandwidth, only needs retuning the front end and the both VCO's.. > > Ours was definitely a TKR-720. Wouldn't tune into the ham band, > although that's what we ordered, turned out they shipped the wrong > unit. Note that it's a TKR-720, not a TK-720. Two very different radios. They share some componentry, but not all. -- Jim Barbour WD8CHL Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
I did not say TKR-720 repeater, I said TK-720 mobile radio or the TKB-720 base radio... -Mensaje original- Juan, I hate to say it but on this one you are wrong. The TKR-720 was build with two different splits. The K (or K1) split ran from 150.00 MHz to 174.00 MHz and the K2 split ran from 136.00 MHz to 150.00 MHz. Dave, I can send you the parts that you need to change in the TKR-720S VCOs (Both TX and RX) to make it a K2 if you would like. That is what I have done with both of mine here and they work GREAT!! james// -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Juan Tellez Sent: Tuesday, April 25, 2006 8:36 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band The one with two splits was the TK-710, the 720 can be programed to full bandwidth, only needs retuning the front end and the both VCO's.. Juan Tellez A, XE2SI EEWW.. I know the 720 was made in at least two band splits, because we got the wrong one at first and it wouldn't come down into the ham band. Wether you can program it there is a very different question from wether it will operate there. Inherently broadbanded designs are inherently bad for repeater use. In our case, we were finally able to eke out 18W without the solder melting on the finals, after I replaced the regular solder with silver solder, and added small heat sink fins. The 720 we had also had a synth issue. After being in service for 3 months or so, it started hopping between our frequency and the local airport tower frequency. This happened very quickly, such that it appeared to be transmitting on both bands at once. The synth was madly signalling to the CPU that it was unlocked, and the CPU was blithely ignoring that. I'd be very surprised if there was a single 720 model that covered this spread. I'd be even more surprised if using it that way was a good idea. Yahoo! Groups Links __ Información de NOD32, revisión 1.1504 (20060424) __ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com Yahoo! Groups Links Yahoo! Groups Links __ Información de NOD32, revisión 1.1504 (20060424) __ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
If possible, I would like the information as well. On 4/24/06, JamesMNelson <[EMAIL PROTECTED]> wrote: > Dave, > > I should have said... > > > I can send you the parts LIST that you need to change in the TKR-720S VCOs > (Both TX and RX) to make it a K2 if you would like. That is what I have done > with both of mine here and they work GREAT!! > > > james// > > > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of JamesMNelson > Sent: Monday, April 24, 2006 8:02 PM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band > > > Juan, > > I hate to say it but on this one you are wrong. The TKR-720 was build with > two different splits. The K (or K1) split ran from 150.00 MHz to 174.00 MHz > and the K2 split ran from 136.00 MHz to 150.00 MHz. > > > > Dave, > > I can send you the parts that you need to change in the TKR-720S VCOs (Both > TX and RX) to make it a K2 if you would like. That is what I have done with > both of mine here and they work GREAT!! > > > > james// > > > -Original Message- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of Juan Tellez > Sent: Tuesday, April 25, 2006 8:36 PM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band > > > The one with two splits was the TK-710, the 720 can be programed to full > bandwidth, only needs retuning the front end and the both VCO's.. > > > Juan Tellez A, XE2SI > EEWW.. > > I know the 720 was made in at least two band splits, because we got > the wrong one at first and it wouldn't come down into the ham band. > > Wether you can program it there is a very different question from > wether it will operate there. Inherently broadbanded designs are > inherently bad for repeater use. > > In our case, we were finally able to eke out 18W without the solder > melting on the finals, after I replaced the regular solder with silver > solder, and added small heat sink fins. > > The 720 we had also had a synth issue. After being in service for 3 > months or so, it started hopping between our frequency and the local > airport tower frequency. This happened very quickly, such that it > appeared to be transmitting on both bands at once. The synth was madly > signalling to the CPU that it was unlocked, and the CPU was blithely > ignoring that. > > I'd be very surprised if there was a single 720 model that covered > this spread. I'd be even more surprised if using it that way was a > good idea. > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > __ Información de NOD32, revisión 1.1504 (20060424) __ > > Este mensaje ha sido analizado con NOD32 antivirus system > http://www.nod32.com > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
Dave, I should have said... I can send you the parts LIST that you need to change in the TKR-720S VCOs (Both TX and RX) to make it a K2 if you would like. That is what I have done with both of mine here and they work GREAT!! james// -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of JamesMNelson Sent: Monday, April 24, 2006 8:02 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band Juan, I hate to say it but on this one you are wrong. The TKR-720 was build with two different splits. The K (or K1) split ran from 150.00 MHz to 174.00 MHz and the K2 split ran from 136.00 MHz to 150.00 MHz. Dave, I can send you the parts that you need to change in the TKR-720S VCOs (Both TX and RX) to make it a K2 if you would like. That is what I have done with both of mine here and they work GREAT!! james// -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Juan Tellez Sent: Tuesday, April 25, 2006 8:36 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band The one with two splits was the TK-710, the 720 can be programed to full bandwidth, only needs retuning the front end and the both VCO's.. Juan Tellez A, XE2SI EEWW.. I know the 720 was made in at least two band splits, because we got the wrong one at first and it wouldn't come down into the ham band. Wether you can program it there is a very different question from wether it will operate there. Inherently broadbanded designs are inherently bad for repeater use. In our case, we were finally able to eke out 18W without the solder melting on the finals, after I replaced the regular solder with silver solder, and added small heat sink fins. The 720 we had also had a synth issue. After being in service for 3 months or so, it started hopping between our frequency and the local airport tower frequency. This happened very quickly, such that it appeared to be transmitting on both bands at once. The synth was madly signalling to the CPU that it was unlocked, and the CPU was blithely ignoring that. I'd be very surprised if there was a single 720 model that covered this spread. I'd be even more surprised if using it that way was a good idea. Yahoo! Groups Links __ Información de NOD32, revisión 1.1504 (20060424) __ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
Juan, I hate to say it but on this one you are wrong. The TKR-720 was build with two different splits. The K (or K1) split ran from 150.00 MHz to 174.00 MHz and the K2 split ran from 136.00 MHz to 150.00 MHz. Dave, I can send you the parts that you need to change in the TKR-720S VCOs (Both TX and RX) to make it a K2 if you would like. That is what I have done with both of mine here and they work GREAT!! james// -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Juan Tellez Sent: Tuesday, April 25, 2006 8:36 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band The one with two splits was the TK-710, the 720 can be programed to full bandwidth, only needs retuning the front end and the both VCO's.. Juan Tellez A, XE2SI EEWW.. I know the 720 was made in at least two band splits, because we got the wrong one at first and it wouldn't come down into the ham band. Wether you can program it there is a very different question from wether it will operate there. Inherently broadbanded designs are inherently bad for repeater use. In our case, we were finally able to eke out 18W without the solder melting on the finals, after I replaced the regular solder with silver solder, and added small heat sink fins. The 720 we had also had a synth issue. After being in service for 3 months or so, it started hopping between our frequency and the local airport tower frequency. This happened very quickly, such that it appeared to be transmitting on both bands at once. The synth was madly signalling to the CPU that it was unlocked, and the CPU was blithely ignoring that. I'd be very surprised if there was a single 720 model that covered this spread. I'd be even more surprised if using it that way was a good idea. Yahoo! Groups Links __ Información de NOD32, revisión 1.1504 (20060424) __ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: TKB or TKR-720 on 220 Mhz band
The one with two splits was the TK-710, the 720 can be programed to full bandwidth, only needs retuning the front end and the both VCO's.. Juan Tellez A, XE2SI EEWW.. I know the 720 was made in at least two band splits, because we got the wrong one at first and it wouldn't come down into the ham band. Wether you can program it there is a very different question from wether it will operate there. Inherently broadbanded designs are inherently bad for repeater use. In our case, we were finally able to eke out 18W without the solder melting on the finals, after I replaced the regular solder with silver solder, and added small heat sink fins. The 720 we had also had a synth issue. After being in service for 3 months or so, it started hopping between our frequency and the local airport tower frequency. This happened very quickly, such that it appeared to be transmitting on both bands at once. The synth was madly signalling to the CPU that it was unlocked, and the CPU was blithely ignoring that. I'd be very surprised if there was a single 720 model that covered this spread. I'd be even more surprised if using it that way was a good idea. Yahoo! Groups Links __ Información de NOD32, revisión 1.1504 (20060424) __ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/