Re: [Repeater-Builder] MASTR IIe dozing off
Is it out of band? [EMAIL PROTECTED] wrote: Have any of you experienced a MASTR IIe dozing off? No open fuses, no loose connections, it just forgets that it is supposed to key up when the receiver squelch opens. After resetting the control module, it works fine for a day or so and then the problem reappears. I'd settle for an over-the-air control module reset code (if one exists), but would prefer to get to the bottom of this. Any suggestions? ** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
Re: [Repeater-Builder] MASTR IIe dozing off
Good question! It is operating at 144.69 / 145.29. What do you think may be going on? Now this model does use channel elements. ** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
Re: [Repeater-Builder] MASTR IIe dozing off
I had a similar problem on 2M, I'll have to dig up the notes and see what we did exactly, but if I remember correctly it was a simple fix. I'll get back to you over the weekend. [EMAIL PROTECTED] wrote: Good question! It is operating at 144.69 / 145.29. What do you think may be going on? Now this model does use channel elements. ** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
Re: [Repeater-Builder] MASTR IIe dozing off
Be sure the control line is terminated. I have seen m3's get repeat disable from voice on the control line (even if remote control is not used). Vexing problem. Steve NU5D - BTW that tip came from Pete Lascelle at GE, or EGE, or Comnet, or MA/COM now days... Vincent Caruso wrote: Is it out of band? [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Have any of you experienced a MASTR IIe dozing off? No open fuses, no loose connections, it just forgets that it is supposed to key up when the receiver squelch opens. After resetting the control module, it works fine for a day or so and then the problem reappears. I'd settle for an over-the-air control module reset code (if one exists), but would prefer to get to the bottom of this. Any suggestions? _
Re: [Repeater-Builder] MASTR IIe dozing off
Actually I believe Steve has the fix, We had an unused DC control on the IIe that wreaking all sorts of havoc. Steve S. Bosshard (NU5D) wrote: Be sure the control line is terminated. I have seen m3's get repeat disable from voice on the control line (even if remote control is not used). Vexing problem. Steve NU5D - BTW that tip came from Pete Lascelle at GE, or EGE, or Comnet, or MA/COM now days... Vincent Caruso wrote: Is it out of band? [EMAIL PROTECTED] mailto:KE4ADV%40aol.com mailto:[EMAIL PROTECTED] mailto:KE4ADV%40aol.com wrote: Have any of you experienced a MASTR IIe dozing off? No open fuses, no loose connections, it just forgets that it is supposed to key up when the receiver squelch opens. After resetting the control module, it works fine for a day or so and then the problem reappears. I'd settle for an over-the-air control module reset code (if one exists), but would prefer to get to the bottom of this. Any suggestions? _