Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
Thanks, Prof. Auluck, this simple fix has solved the problem. On Sun, Jun 28, 2015 at 12:25 PM, wrote: > hi, > the computer cannot locate the executables siesta & transiesta. > you need to make entries in .bashrc or .cshrc files > a very simple fix is to copy the executables to /usr/bin/ > s.auluck > > > Dear Prof. Verma ji, > > > > Everything went well and transiesta is working now. > > But, I am now experiencing a new problem after doing this. > > > > Either siesta or transiesta, only one at a time is working. I mean, after > > doing make transiesta and so on.. > > transiesta is working well, but when I try with siesta test, I get the > > following error: > > > > jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ make > > Running ag test... > > ==> Copying pseudopotential file for Ag... > > ==> Running SIESTA as ../../../siesta > > /bin/sh: 1: ../../../siesta: not found > > make: *** [completed_work] Error 127 > > jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ > > > > Same thing happens with transiesta, when I do make siesta and so on... > and > > then try with a test run for transiesta. > > > > Please suggest me. > > > > Regards, > > JVN Sarma. > > > > > > > > On Sat, Jun 27, 2015 at 10:31 AM, Dr. Mohan L. Verma < > drmoha...@yahoo.com> > > wrote: > > > >> Dear Sharma ji > >> > >> Please read the manual carefully and start from beginning i.e. from the > >> compilation of transiesta. we are using siesta-trunk-462. > >> In order to compile transiesta in series Use following steps : > >> 1. download siesta-trunk-462 from : > >> http://departments.icmab.es/leem/siesta/CodeAccess/Code/downloads.html > >> and extract it in home directory > >> now go to Obj dir and configure using : > >> $ /home/drmohanlv/siesta-trunk-462/Obj/ sh ../Src/obj_setup.sh > >> then > >> $ /home/drmohanlv/siesta-trunk-462/Obj/ ../Src/configure > >> finally compile transiesta using > >> $ /home/drmohanlv/siesta-trunk-462/Obj/ make transiesta > >> this will generate a "transiesta" binary file in this directory. > >> copy binary file to /home/drmohanlv/bin/ directory by > >> $ /home/drmohanlv/siesta-trunk-462/Obj/ cp transiesta ~/bin > >> now for compilation of tbtrans go to > >> $ /home/drmohanlv/siesta-trunk-462/Util/TBTrans_rep/ > >> and only type make this will generate "tbtrans" binary file for further > >> use > >> copy binary file to /home/drmohanlv/bin/ directory by > >> $ /home/drmohanlv/siesta-trunk-462/Obj/ cp tbtrans ~/bin > >> After above compilation of "transiesta" and "tbtrans" you can run the > >> examples in the test directory. > >> All the best. > >> > >> Dr Mohan L Verma > >> Prof & Head > >> Department of Applied Physics > >> FET,SSGI Shri Shankaracharya Technical Campus-Junwani, Bhilai > >> (Chhattisgrah) INDIA > >> 490020 > >> email : drmoha...@gmail.com > >> > >> > >> > >> > >> On Friday, 26 June 2015 10:39 PM, Jaehwan Kweon > >> wrote: > >> > >> > >> that is probably because there is no executable transiesta file in > >> /your_directory/siesta-3.2/Obj > >> > >> so, you need to check whether files are successfully compiled > >> > >> try this.. > >> > >> $cd siesta-3.2/Obj/ > >> $make clean > >> $make transiesta > >> $cp /directory/siesta/Obj/transiesta /usr/local/bin > >> > >> good luck! > >> > >> On Sat, Jun 27, 2015 at 1:39 AM, jv sharma wrote: > >> > >> I am still getting the same error, after doing this. That is, like this: > >> > >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ > transiesta > >> < elec.fast.fdf > elec.fast.out > >> transiesta: command not found > >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ > >> > >> On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili > >> > >> wrote: > >> > >> Hi, > >> > >> You can try this: > >> export PATH= /your_directory/siesta-3.2/Obj:$PATH > >> > >> Best, > >> Raha > >> > >> On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: > >> > >> > >> On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon > >> wrote: > >> > >> you would better install transiesta first > >> > >> $cd siesta-3.2/Obj/ > >> $make transiesta > >> > >> then > >> $cp /directory/siesta/Obj/transiesta /usr/local/bin > >> > >> > >> Now I get like this: > >> > >> jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin > >> cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file > >> or > >> directory > >> jv@jv-desktop:~$ > >> > >> > >> > >> On Sat, Jun 27, 2015 at 12:36 AM, jv sharma > wrote: > >> > >> > >> > >> On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> > >> wrote: > >> > >> Hi, Sarma > >> > >> It seems that the transiesta can not be found by the system. Do you add > >> the absolute path of the executable transiesta in the environment > >> variable > >> $PATH? You can test if it is added in the $PATH by typing “which > >> transiesta” in the command line. > >> > >> > >> I got like this: > >> > >> jv@jv-desktop:~$ which transiesta > >> jv@jv-desktop:~$ > >> > >> I do not understand this. > >> > >> > >> Good
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
hi, the computer cannot locate the executables siesta & transiesta. you need to make entries in .bashrc or .cshrc files a very simple fix is to copy the executables to /usr/bin/ s.auluck > Dear Prof. Verma ji, > > Everything went well and transiesta is working now. > But, I am now experiencing a new problem after doing this. > > Either siesta or transiesta, only one at a time is working. I mean, after > doing make transiesta and so on.. > transiesta is working well, but when I try with siesta test, I get the > following error: > > jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ make > Running ag test... > ==> Copying pseudopotential file for Ag... > ==> Running SIESTA as ../../../siesta > /bin/sh: 1: ../../../siesta: not found > make: *** [completed_work] Error 127 > jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ > > Same thing happens with transiesta, when I do make siesta and so on... and > then try with a test run for transiesta. > > Please suggest me. > > Regards, > JVN Sarma. > > > > On Sat, Jun 27, 2015 at 10:31 AM, Dr. Mohan L. Verma > wrote: > >> Dear Sharma ji >> >> Please read the manual carefully and start from beginning i.e. from the >> compilation of transiesta. we are using siesta-trunk-462. >> In order to compile transiesta in series Use following steps : >> 1. download siesta-trunk-462 from : >> http://departments.icmab.es/leem/siesta/CodeAccess/Code/downloads.html >> and extract it in home directory >> now go to Obj dir and configure using : >> $ /home/drmohanlv/siesta-trunk-462/Obj/ sh ../Src/obj_setup.sh >> then >> $ /home/drmohanlv/siesta-trunk-462/Obj/ ../Src/configure >> finally compile transiesta using >> $ /home/drmohanlv/siesta-trunk-462/Obj/ make transiesta >> this will generate a "transiesta" binary file in this directory. >> copy binary file to /home/drmohanlv/bin/ directory by >> $ /home/drmohanlv/siesta-trunk-462/Obj/ cp transiesta ~/bin >> now for compilation of tbtrans go to >> $ /home/drmohanlv/siesta-trunk-462/Util/TBTrans_rep/ >> and only type make this will generate "tbtrans" binary file for further >> use >> copy binary file to /home/drmohanlv/bin/ directory by >> $ /home/drmohanlv/siesta-trunk-462/Obj/ cp tbtrans ~/bin >> After above compilation of "transiesta" and "tbtrans" you can run the >> examples in the test directory. >> All the best. >> >> Dr Mohan L Verma >> Prof & Head >> Department of Applied Physics >> FET,SSGI Shri Shankaracharya Technical Campus-Junwani, Bhilai >> (Chhattisgrah) INDIA >> 490020 >> email : drmoha...@gmail.com >> >> >> >> >> On Friday, 26 June 2015 10:39 PM, Jaehwan Kweon >> wrote: >> >> >> that is probably because there is no executable transiesta file in >> /your_directory/siesta-3.2/Obj >> >> so, you need to check whether files are successfully compiled >> >> try this.. >> >> $cd siesta-3.2/Obj/ >> $make clean >> $make transiesta >> $cp /directory/siesta/Obj/transiesta /usr/local/bin >> >> good luck! >> >> On Sat, Jun 27, 2015 at 1:39 AM, jv sharma wrote: >> >> I am still getting the same error, after doing this. That is, like this: >> >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta >> < elec.fast.fdf > elec.fast.out >> transiesta: command not found >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ >> >> On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili >> >> wrote: >> >> Hi, >> >> You can try this: >> export PATH= /your_directory/siesta-3.2/Obj:$PATH >> >> Best, >> Raha >> >> On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: >> >> >> On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon >> wrote: >> >> you would better install transiesta first >> >> $cd siesta-3.2/Obj/ >> $make transiesta >> >> then >> $cp /directory/siesta/Obj/transiesta /usr/local/bin >> >> >> Now I get like this: >> >> jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin >> cp: cannot stat â/directory/siesta-3.2/Obj/transiestaâ: No such file >> or >> directory >> jv@jv-desktop:~$ >> >> >> >> On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: >> >> >> >> On Fri, Jun 26, 2015 at 4:28 PM, æ¯é£ <200921220...@mail.bnu.edu.cn> >> wrote: >> >> Hi, Sarma >> >> It seems that the transiesta can not be found by the system. Do you add >> the absolute path of the executable transiesta in the environment >> variable >> $PATH? You can test if it is added in the $PATH by typing âwhich >> transiestaâ in the command line. >> >> >> I got like this: >> >> jv@jv-desktop:~$ which transiesta >> jv@jv-desktop:~$ >> >> I do not understand this. >> >> >> Good luck. >> >> Fei Mao >> USC >> >> å¨2015-06-26ï¼jv sharma åé: >> >> -åå§é®ä»¶- >> *å件人:* jv sharma >> *åéæ¶é´:* 2015å¹´6æ26æ¥ ææäº >> *æ¶ä»¶äºº:* siesta-l@uam.es >> *æé:* nickpap...@gmail.com >> *主é¢:* [SIESTA-L] TranSiesta Error after trying to run a fast example >> >> >> Dear Siesta Community, >> >> >> I get the following after trying to run a fast example in TranSiesta: >> >> jv@jv-desktop:~/siesta
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
Dear Prof. Verma ji, Everything went well and transiesta is working now. But, I am now experiencing a new problem after doing this. Either siesta or transiesta, only one at a time is working. I mean, after doing make transiesta and so on.. transiesta is working well, but when I try with siesta test, I get the following error: jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ make Running ag test... ==> Copying pseudopotential file for Ag... ==> Running SIESTA as ../../../siesta /bin/sh: 1: ../../../siesta: not found make: *** [completed_work] Error 127 jv@jv-desktop:~/siesta-trunk-462/Obj/Tests/ag$ Same thing happens with transiesta, when I do make siesta and so on... and then try with a test run for transiesta. Please suggest me. Regards, JVN Sarma. On Sat, Jun 27, 2015 at 10:31 AM, Dr. Mohan L. Verma wrote: > Dear Sharma ji > > Please read the manual carefully and start from beginning i.e. from the > compilation of transiesta. we are using siesta-trunk-462. > In order to compile transiesta in series Use following steps : > 1. download siesta-trunk-462 from : > http://departments.icmab.es/leem/siesta/CodeAccess/Code/downloads.html > and extract it in home directory > now go to Obj dir and configure using : > $ /home/drmohanlv/siesta-trunk-462/Obj/ sh ../Src/obj_setup.sh > then > $ /home/drmohanlv/siesta-trunk-462/Obj/ ../Src/configure > finally compile transiesta using > $ /home/drmohanlv/siesta-trunk-462/Obj/ make transiesta > this will generate a "transiesta" binary file in this directory. > copy binary file to /home/drmohanlv/bin/ directory by > $ /home/drmohanlv/siesta-trunk-462/Obj/ cp transiesta ~/bin > now for compilation of tbtrans go to > $ /home/drmohanlv/siesta-trunk-462/Util/TBTrans_rep/ > and only type make this will generate "tbtrans" binary file for further use > copy binary file to /home/drmohanlv/bin/ directory by > $ /home/drmohanlv/siesta-trunk-462/Obj/ cp tbtrans ~/bin > After above compilation of "transiesta" and "tbtrans" you can run the > examples in the test directory. > All the best. > > Dr Mohan L Verma > Prof & Head > Department of Applied Physics > FET,SSGI Shri Shankaracharya Technical Campus-Junwani, Bhilai > (Chhattisgrah) INDIA > 490020 > email : drmoha...@gmail.com > > > > > On Friday, 26 June 2015 10:39 PM, Jaehwan Kweon > wrote: > > > that is probably because there is no executable transiesta file in > /your_directory/siesta-3.2/Obj > > so, you need to check whether files are successfully compiled > > try this.. > > $cd siesta-3.2/Obj/ > $make clean > $make transiesta > $cp /directory/siesta/Obj/transiesta /usr/local/bin > > good luck! > > On Sat, Jun 27, 2015 at 1:39 AM, jv sharma wrote: > > I am still getting the same error, after doing this. That is, like this: > > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta > < elec.fast.fdf > elec.fast.out > transiesta: command not found > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ > > On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili > wrote: > > Hi, > > You can try this: > export PATH= /your_directory/siesta-3.2/Obj:$PATH > > Best, > Raha > > On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: > > > On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon > wrote: > > you would better install transiesta first > > $cd siesta-3.2/Obj/ > $make transiesta > > then > $cp /directory/siesta/Obj/transiesta /usr/local/bin > > > Now I get like this: > > jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin > cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or > directory > jv@jv-desktop:~$ > > > > On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: > > > > On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: > > Hi, Sarma > > It seems that the transiesta can not be found by the system. Do you add > the absolute path of the executable transiesta in the environment variable > $PATH? You can test if it is added in the $PATH by typing “which > transiesta” in the command line. > > > I got like this: > > jv@jv-desktop:~$ which transiesta > jv@jv-desktop:~$ > > I do not understand this. > > > Good luck. > > Fei Mao > USC > > 在2015-06-26,jv sharma 写道: > > -原始邮件- > *发件人:* jv sharma > *发送时间:* 2015年6月26日 星期五 > *收件人:* siesta-l@uam.es > *抄送:* nickpap...@gmail.com > *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example > > > Dear Siesta Community, > > > I get the following after trying to run a fast example in TranSiesta: > > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta > < elec.fast.fdf > elec.fast.out > transiesta: command not found > > Please help me to get out of this. > Many thanks. > > Best regards, > JVN Sarma, India. > > > > > > > > -- > Jaehwan Kweon > Sungkyunkwan University(SKKU) & SKKU Advanced Institute of > Nanotechnology(SAINT) > 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea > > Office:+82-31-299-4871 > C.P.#: 010-5145-8388 > E-mail: ja
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
Dear Sharma ji Please read the manual carefully and start from beginning i.e. from the compilation of transiesta. we are using siesta-trunk-462. In order to compile transiesta in series Use following steps : 1. download siesta-trunk-462 from : http://departments.icmab.es/leem/siesta/CodeAccess/Code/downloads.html and extract it in home directory now go to Obj dir and configure using : $ /home/drmohanlv/siesta-trunk-462/Obj/ sh ../Src/obj_setup.sh then $ /home/drmohanlv/siesta-trunk-462/Obj/ ../Src/configure finally compile transiesta using $ /home/drmohanlv/siesta-trunk-462/Obj/ make transiesta this will generate a "transiesta" binary file in this directory. copy binary file to /home/drmohanlv/bin/ directory by $ /home/drmohanlv/siesta-trunk-462/Obj/ cp transiesta ~/bin now for compilation of tbtrans go to $ /home/drmohanlv/siesta-trunk-462/Util/TBTrans_rep/ and only type make this will generate "tbtrans" binary file for further use copy binary file to /home/drmohanlv/bin/ directory by $ /home/drmohanlv/siesta-trunk-462/Obj/ cp tbtrans ~/bin After above compilation of "transiesta" and "tbtrans" you can run the examples in the test directory. All the best. Dr Mohan L Verma Prof & Head Department of Applied Physics FET,SSGI Shri Shankaracharya Technical Campus-Junwani, Bhilai (Chhattisgrah) INDIA 490020 email : drmoha...@gmail.com On Friday, 26 June 2015 10:39 PM, Jaehwan Kweon wrote: that is probably because there is no executable transiesta file in /your_directory/siesta-3.2/Obj so, you need to check whether files are successfully compiled try this.. $cd siesta-3.2/Obj/$make clean$make transiesta$cp /directory/siesta/Obj/transiesta /usr/local/bin good luck! On Sat, Jun 27, 2015 at 1:39 AM, jv sharma wrote: I am still getting the same error, after doing this. That is, like this: jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta < elec.fast.fdf > elec.fast.out transiesta: command not found jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili wrote: Hi, You can try this: export PATH= /your_directory/siesta-3.2/Obj:$PATH Best, Raha On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon wrote: you would better install transiesta first $cd siesta-3.2/Obj/$make transiesta then$cp /directory/siesta/Obj/transiesta /usr/local/bin Now I get like this: jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or directory jv@jv-desktop:~$ On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: Hi, Sarma It seems that the transiesta can not be found by the system. Do you add the absolute path of the executable transiesta in the environment variable $PATH? You can test if it is added in the $PATH by typing “which transiesta” in the command line. I got like this: jv@jv-desktop:~$ which transiesta jv@jv-desktop:~$ I do not understand this. Good luck. Fei MaoUSC 在2015-06-26,jv sharma 写道: -原始邮件- 发件人: jv sharma 发送时间: 2015年6月26日 星期五 收件人: siesta-l@uam.es 抄送: nickpap...@gmail.com 主题: [SIESTA-L] TranSiesta Error after trying to run a fast example Dear Siesta Community, I get the following after trying to run a fast example in TranSiesta: jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta < elec.fast.fdf > elec.fast.out transiesta: command not found Please help me to get out of this. Many thanks. Best regards, JVN Sarma, India. -- Jaehwan KweonSungkyunkwan University(SKKU) & SKKU Advanced Institute of Nanotechnology(SAINT)2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea Office:+82-31-299-4871C.P.#: 010-5145-8388E-mail: janikw...@gmail.com zaih...@skku.edu -- -- Jaehwan KweonSungkyunkwan University(SKKU) & SKKU Advanced Institute of Nanotechnology(SAINT)2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea Office:+82-31-299-4871C.P.#: 010-5145-8388E-mail: janikw...@gmail.com zaih...@skku.edu
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
that is probably because there is no executable transiesta file in /your_directory/siesta-3.2/Obj so, you need to check whether files are successfully compiled try this.. $cd siesta-3.2/Obj/ $make clean $make transiesta $cp /directory/siesta/Obj/transiesta /usr/local/bin good luck! On Sat, Jun 27, 2015 at 1:39 AM, jv sharma wrote: > I am still getting the same error, after doing this. That is, like this: > > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta > < elec.fast.fdf > elec.fast.out > transiesta: command not found > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ > > On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili > wrote: > >> Hi, >> >> You can try this: >> export PATH= /your_directory/siesta-3.2/Obj:$PATH >> >> Best, >> Raha >> >> On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: >> >>> >>> On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon >>> wrote: >>> you would better install transiesta first $cd siesta-3.2/Obj/ $make transiesta then $cp /directory/siesta/Obj/transiesta /usr/local/bin >>> >>> Now I get like this: >>> >>> jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin >>> cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or >>> directory >>> jv@jv-desktop:~$ >>> >>> On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: > > > On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> > wrote: > >> Hi, Sarma >> >> >> >> It seems that the transiesta can not be found by the system. Do you >> add the absolute path of the executable transiesta in the environment >> variable $PATH? You can test if it is added in the $PATH by typing “which >> transiesta” in the command line. >> > > I got like this: > > jv@jv-desktop:~$ which transiesta > jv@jv-desktop:~$ > > I do not understand this. > > >> Good luck. >> >> >> >> Fei Mao >> >> USC >> >> 在2015-06-26,jv sharma 写道: >> >> -原始邮件- >> *发件人:* jv sharma >> *发送时间:* 2015年6月26日 星期五 >> *收件人:* siesta-l@uam.es >> *抄送:* nickpap...@gmail.com >> *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example >> >> >> Dear Siesta Community, >> >> >> I get the following after trying to run a fast example in TranSiesta: >> >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ >> transiesta < elec.fast.fdf > elec.fast.out >> transiesta: command not found >> >> Please help me to get out of this. >> Many thanks. >> >> Best regards, >> JVN Sarma, India. >> >> >> >> > -- Jaehwan Kweon Sungkyunkwan University(SKKU) & SKKU Advanced Institute of Nanotechnology(SAINT) 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea Office:+82-31-299-4871 C.P.#: 010-5145-8388 E-mail: janikw...@gmail.com zaih...@skku.edu >>> >>> >> >> >> -- >> >> >> > > -- Jaehwan Kweon Sungkyunkwan University(SKKU) & SKKU Advanced Institute of Nanotechnology(SAINT) 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea Office:+82-31-299-4871 C.P.#: 010-5145-8388 E-mail: janikw...@gmail.com zaih...@skku.edu
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
I am still getting the same error, after doing this. That is, like this: jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta < elec.fast.fdf > elec.fast.out transiesta: command not found jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ On Fri, Jun 26, 2015 at 10:01 PM, Raha khalili wrote: > Hi, > > You can try this: > export PATH= /your_directory/siesta-3.2/Obj:$PATH > > Best, > Raha > > On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: > >> >> On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon >> wrote: >> >>> you would better install transiesta first >>> >>> $cd siesta-3.2/Obj/ >>> $make transiesta >>> >>> then >>> $cp /directory/siesta/Obj/transiesta /usr/local/bin >>> >> >> Now I get like this: >> >> jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin >> cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or >> directory >> jv@jv-desktop:~$ >> >> >>> >>> On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: >>> On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: > Hi, Sarma > > > > It seems that the transiesta can not be found by the system. Do you > add the absolute path of the executable transiesta in the environment > variable $PATH? You can test if it is added in the $PATH by typing “which > transiesta” in the command line. > I got like this: jv@jv-desktop:~$ which transiesta jv@jv-desktop:~$ I do not understand this. > Good luck. > > > > Fei Mao > > USC > > 在2015-06-26,jv sharma 写道: > > -原始邮件- > *发件人:* jv sharma > *发送时间:* 2015年6月26日 星期五 > *收件人:* siesta-l@uam.es > *抄送:* nickpap...@gmail.com > *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example > > > Dear Siesta Community, > > > I get the following after trying to run a fast example in TranSiesta: > > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ > transiesta < elec.fast.fdf > elec.fast.out > transiesta: command not found > > Please help me to get out of this. > Many thanks. > > Best regards, > JVN Sarma, India. > > > > >>> >>> >>> -- >>> Jaehwan Kweon >>> Sungkyunkwan University(SKKU) & SKKU Advanced Institute of >>> Nanotechnology(SAINT) >>> 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea >>> >>> Office:+82-31-299-4871 >>> C.P.#: 010-5145-8388 >>> E-mail: janikw...@gmail.com >>> zaih...@skku.edu >>> >> >> > > > -- > > >
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
Hi, You can try this: export PATH= /your_directory/siesta-3.2/Obj:$PATH Best, Raha On Fri, Jun 26, 2015 at 6:05 PM, jv sharma wrote: > > On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon > wrote: > >> you would better install transiesta first >> >> $cd siesta-3.2/Obj/ >> $make transiesta >> >> then >> $cp /directory/siesta/Obj/transiesta /usr/local/bin >> > > Now I get like this: > > jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin > cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or > directory > jv@jv-desktop:~$ > > >> >> On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: >> >>> >>> >>> On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> >>> wrote: >>> Hi, Sarma It seems that the transiesta can not be found by the system. Do you add the absolute path of the executable transiesta in the environment variable $PATH? You can test if it is added in the $PATH by typing “which transiesta” in the command line. >>> >>> I got like this: >>> >>> jv@jv-desktop:~$ which transiesta >>> jv@jv-desktop:~$ >>> >>> I do not understand this. >>> >>> Good luck. Fei Mao USC 在2015-06-26,jv sharma 写道: -原始邮件- *发件人:* jv sharma *发送时间:* 2015年6月26日 星期五 *收件人:* siesta-l@uam.es *抄送:* nickpap...@gmail.com *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example Dear Siesta Community, I get the following after trying to run a fast example in TranSiesta: jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta < elec.fast.fdf > elec.fast.out transiesta: command not found Please help me to get out of this. Many thanks. Best regards, JVN Sarma, India. >>> >> >> >> -- >> Jaehwan Kweon >> Sungkyunkwan University(SKKU) & SKKU Advanced Institute of >> Nanotechnology(SAINT) >> 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea >> >> Office:+82-31-299-4871 >> C.P.#: 010-5145-8388 >> E-mail: janikw...@gmail.com >> zaih...@skku.edu >> > > --
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
On Fri, Jun 26, 2015 at 9:18 PM, Jaehwan Kweon wrote: > you would better install transiesta first > > $cd siesta-3.2/Obj/ > $make transiesta > > then > $cp /directory/siesta/Obj/transiesta /usr/local/bin > Now I get like this: jv@jv-desktop:~$ cp /directory/siesta-3.2/Obj/transiesta /usr/local/bin cp: cannot stat ‘/directory/siesta-3.2/Obj/transiesta’: No such file or directory jv@jv-desktop:~$ > > On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: > >> >> >> On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: >> >>> Hi, Sarma >>> >>> >>> >>> It seems that the transiesta can not be found by the system. Do you add >>> the absolute path of the executable transiesta in the environment variable >>> $PATH? You can test if it is added in the $PATH by typing “which >>> transiesta” in the command line. >>> >> >> I got like this: >> >> jv@jv-desktop:~$ which transiesta >> jv@jv-desktop:~$ >> >> I do not understand this. >> >> >>> Good luck. >>> >>> >>> >>> Fei Mao >>> >>> USC >>> >>> 在2015-06-26,jv sharma 写道: >>> >>> -原始邮件- >>> *发件人:* jv sharma >>> *发送时间:* 2015年6月26日 星期五 >>> *收件人:* siesta-l@uam.es >>> *抄送:* nickpap...@gmail.com >>> *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example >>> >>> >>> Dear Siesta Community, >>> >>> >>> I get the following after trying to run a fast example in TranSiesta: >>> >>> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ >>> transiesta < elec.fast.fdf > elec.fast.out >>> transiesta: command not found >>> >>> Please help me to get out of this. >>> Many thanks. >>> >>> Best regards, >>> JVN Sarma, India. >>> >>> >>> >>> >> > > > -- > Jaehwan Kweon > Sungkyunkwan University(SKKU) & SKKU Advanced Institute of > Nanotechnology(SAINT) > 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea > > Office:+82-31-299-4871 > C.P.#: 010-5145-8388 > E-mail: janikw...@gmail.com > zaih...@skku.edu >
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
you would better install transiesta first $cd siesta-3.2/Obj/ $make transiesta then $cp /directory/siesta/Obj/transiesta /usr/local/bin On Sat, Jun 27, 2015 at 12:36 AM, jv sharma wrote: > > > On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: > >> Hi, Sarma >> >> >> >> It seems that the transiesta can not be found by the system. Do you add >> the absolute path of the executable transiesta in the environment variable >> $PATH? You can test if it is added in the $PATH by typing “which >> transiesta” in the command line. >> > > I got like this: > > jv@jv-desktop:~$ which transiesta > jv@jv-desktop:~$ > > I do not understand this. > > >> Good luck. >> >> >> >> Fei Mao >> >> USC >> >> 在2015-06-26,jv sharma 写道: >> >> -原始邮件- >> *发件人:* jv sharma >> *发送时间:* 2015年6月26日 星期五 >> *收件人:* siesta-l@uam.es >> *抄送:* nickpap...@gmail.com >> *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example >> >> >> Dear Siesta Community, >> >> >> I get the following after trying to run a fast example in TranSiesta: >> >> jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta >> < elec.fast.fdf > elec.fast.out >> transiesta: command not found >> >> Please help me to get out of this. >> Many thanks. >> >> Best regards, >> JVN Sarma, India. >> >> >> >> > -- Jaehwan Kweon Sungkyunkwan University(SKKU) & SKKU Advanced Institute of Nanotechnology(SAINT) 2066 Seobu-ro, Jangan-gu, Suwon, Gyeonggi 440 - 746, Republic of Korea Office:+82-31-299-4871 C.P.#: 010-5145-8388 E-mail: janikw...@gmail.com zaih...@skku.edu
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
On Fri, Jun 26, 2015 at 4:28 PM, 毛飞 <200921220...@mail.bnu.edu.cn> wrote: > Hi, Sarma > > > > It seems that the transiesta can not be found by the system. Do you add > the absolute path of the executable transiesta in the environment variable > $PATH? You can test if it is added in the $PATH by typing “which > transiesta” in the command line. > I got like this: jv@jv-desktop:~$ which transiesta jv@jv-desktop:~$ I do not understand this. > Good luck. > > > > Fei Mao > > USC > > 在2015-06-26,jv sharma 写道: > > -原始邮件- > *发件人:* jv sharma > *发送时间:* 2015年6月26日 星期五 > *收件人:* siesta-l@uam.es > *抄送:* nickpap...@gmail.com > *主题:* [SIESTA-L] TranSiesta Error after trying to run a fast example > > > Dear Siesta Community, > > > I get the following after trying to run a fast example in TranSiesta: > > jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta > < elec.fast.fdf > elec.fast.out > transiesta: command not found > > Please help me to get out of this. > Many thanks. > > Best regards, > JVN Sarma, India. > > > >
Re: [SIESTA-L] TranSiesta Error after trying to run a fast example
Hi, Sarma It seems that the transiesta can not be found by the system. Do you add the absolute path of the executable transiesta in the environment variable $PATH? You can test if it is added in the $PATH by typing “which transiesta” in the command line. Good luck. Fei Mao USC 在2015-06-26,jv sharma 写道:-原始邮件- 发件人: jv sharma 发送时间: 2015年6月26日 星期五 收件人: siesta-l@uam.es 抄送: nickpap...@gmail.com 主题: [SIESTA-L] TranSiesta Error after trying to run a fast example Dear Siesta Community, I get the following after trying to run a fast example in TranSiesta: jv@jv-desktop:~/siesta-3.2/Examples/TranSiesta/Elec/OUT_Test$ transiesta < elec.fast.fdf > elec.fast.out transiesta: command not found Please help me to get out of this. Many thanks. Best regards, JVN Sarma, India.