Re: CS>Practical information from OrMNS

2020-07-20 Thread Anthony Delio 
google is not your friend, They are part of the way left, and try to
sway your thoughts to the Democrats agenda ,

- Original Message -
From: silver-list@eskimo.com
To:
Cc:
Sent:Sun, 19 Jul 2020 19:36:36 +0200
Subject:Re: CS>Practical information from OrMNS

 Cyndiann,

 You obviously need some help with knowledge. 
 What you could do is do your own research on complementary and
alternative health. Google is 
 your friend. Really. Or better use an unbiased serch engine; find
your own or ask a friend. 

 Being domineering will not get me to do anything. Being pleasant
will.

 Tony 

 On 19 Jul 2020 at 10:31, Cyndiann Phillips wrote about :
 Subject : Re: CS>Practical information from O

 > 
 > Not when it lists things we know won't help
 > 
 > 
 > On Sun, Jul 19, 2020 at 3:06 AM Tony Moody  wrote:
 > 
 > This is useful useable information.
 > 
 > Not much about silver tho'
 > 
 > OK, Tony
 > 
 > FOR IMMEDIATE RELEASE
 > Orthomolecular Medicine News Service, July 18, 2020
 > 
 > 
 > COVID-19
 > How can I cure thee? Let me count the ways.
 > Commentary by Thomas E. Levy, MD, JD
 > 
 >
https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95=163A1
 > 67A
 > 1A7835
 > 
 > 
 > --
 > The Silver List is a moderated forum for discussing Colloidal
Silver.
 > Rules and Instructions: http://www.silverlist.org
 > 
 > Unsubscribe:
 > 
 > Archives:
 > http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
 > 
 > Off-Topic discussions: 
 > List Owner: Mike Devour 
 > 
 >

CS>Q for Ode, et al

2020-07-20 Thread James Osbourne Holmes 
I am using Dr. Marx's CSPro Max device.
The mechanical timer fell over and jammed and the batch ran overnight.  The
rods were slightly pitted.  Bruce said to run a bit longer and it would
produce a usable batch.  I did about 13 minutes instead of 11.  The batch
has a slight red tint to the usual gold.  It has remained stable for
several months.
I will appreciate your...or anyone's comments.
Thank you for your attention.

James Osbourne Holmes
a/k/a *Red Pill Media*
American State National

*http://t heamericanstatesassembly.net
*
http://annavonreitz.com
h ttp://signinamerica.com

This private email and any attachment(s) is covered by the Electronic
Communications Privacy Act, 18 USC 25-10-2521 and is for the sole use of
the intended recipient and contains privileged and/or confidential
information. No monitoring of my email or other means of surveillance,
electronic and otherwise, is permitted and I reserve all my rights, without
recourse and without prejudice, nunc pro tunc.  I do not consent to anyone
tampering with, altering or delaying any incoming or outgoing communication.

Re: Re: CS>Practical information from OrMNS

2020-07-20 Thread Anthony Delio 
Fake News, this drug has proven safe for 50 years 

- Original Message -
From: silver-list@eskimo.com
To:
Cc:
Sent:Sun, 19 Jul 2020 17:36:44 -0700
Subject:Re: Re: CS>Practical information from OrMNS

Hydroxychloroquine plus azithromycin and zinc is clinically proven to
cure COVID-19 when given in the beginning and intermediate stages of
the disease.   Dr. Didier Raoult MD conducted three studies on over
1000 patients and cured 98% of them.  The Henry Ford Hospital just
conducted a study using Hydroxychloroquine on critically ill patients
showing a 26% decrease in death as compared to a control group. 
Hundreds of doctors around the world consider this the treatment of
choice.  There are other cures as well.  CDS (chlorine dioxide
solution) was given IV to 100 patients in Ecuador in a pre clinical
trial and all 100 were cured in 4 days or less.  Look up Andreaus
Kalcker. PHD in biophysics.  The Bolivian government is in the
process of legalizing this as an official treatment for the disease. 
 Budesonide,  a corticosteroid,  is being used along with an
antibiotic and zinc by a Texas doctor who is claiming 100% recovery
rate.  I'm sure there are some herbal cures as well, not to mention
colloidal/ ionic silver too.
Sent using myEarthLink

On Sun Jul 19 11:05:43 PDT 2020 Cyndiann Phillips wrote:
   I'm a trained herbalist, make a living on herbal remedies so there
is that. The  hydroxychloroquine was found to cause dangerous side
effects and should not be used for this. A study that was recently
done was shut down over that. Tony you've posted some fake news on
here more than once so follow your own advice. 

  On Sun, Jul 19, 2020 at 1:36 PM Tony Moody < [1] 

 [2] [3] 

a...@aptech.co.za [4] 

> wrote: 
  Cyndiann, 

 You obviously need some help with knowledge. 
 What you could do is do your own research on complementary and
alternative health. Google is 
 your friend. Really.  Or better use an unbiased serch engine; find
your own or ask a friend.  

 Being domineering will not get me to do anything. Being pleasant
will. 

 Tony 

 On 19 Jul 2020 at 10:31, Cyndiann Phillips wrote about : 
 Subject : Re: CS>Practical information from O 

 > 
 > Not when it lists things we know won't help 
 > 
 > 
 > On Sun, Jul 19, 2020 at 3:06 AM Tony Moody < [5] 

 [6] [7] 

a...@aptech.co.za [8] 

> wrote: 
 >      
 >     This is useful useable information. 
 >      
 >     Not much about silver tho' 
 >      
 >     OK, Tony 
 >      
 >     FOR IMMEDIATE RELEASE 
 >     Orthomolecular Medicine News Service, July 18, 2020 
 >      
 >      
 >     COVID-19 
 >     How can I cure thee? Let me count the ways. 
 >     Commentary by Thomas E. Levy, MD, JD 
 >      
 >      [9] 

 [10] [11] 


https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95=163A1
[12] 

 >     67A 
 >     1A7835 
 >      
 >      
 >     -- 
 >     The Silver List is a moderated forum for discussing
Colloidal Silver. 
 >     Rules and Instructions: [13] 

 [14] [15] 

http://www.silverlist.org [16] 

 >      
 >     Unsubscribe: 
 >      
 >     Archives: 
 >      [21] 

 [22] [23] 

http://www.mail-archive.com/silver-list@eskimo.com/maillist.html [24]


 >      
 >     Off-Topic discussions:  
 >     List Owner: Mike Devour  
 >      
 > 

   @gmail.com> 

Links:
--
[1] mailto:a...@aptech.co.za
[2] mailto:a...@aptechco.za
[3] mailto:a...@aptech.co.za
[4] mailto:a...@aptech.co.za
[5] mailto:a...@aptech.co.za
[6] mailto:a...@aptech.co.za
[7] mailto:a...@aptech.co.za
[8] mailto:a...@aptech.co.za
[9]
https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95i=163A1
[10]
https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95i=163A1
[11]
https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95i=163A1
[12]
https://orthomolecular.acemlna.com/lt.php?s=81b20b397c08de2cff4f29afa0dffa95i=163A1
[13] http://www.silverlist.org
[14] http://www.silverlist.org
[15] http://www.silverlist.org
[16] http://www.silverlist.org
[17] mailto:silver-list-requ...@eskimo.com
[18] mailto:silver-list-requ...@eskimo.com
[19] mailto:silver-list-requ...@eskimo.com
[20] mailto:silver-list-requ...@eskimo.com
[21] http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
[22] http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
[23] http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
[24] http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
[25] mailto:silver-off-topic-l...@eskimo.com
[26] mailto:silver-off-topic-l...@eskimo.com
[27] mailto:silver-off-topic-l...@eskimo.com
[28] mailto:silver-off-topic-l...@eskimo.com
[29] mailto:mdev...@eskimo.com
[30] mailto:mdev...@eskimo.com
[31] mailto:mdev...@eskimo.com
[32] mailto:mdev...@eskimo.com

Re: CS>Practical information from OrMNS

2020-07-20 Thread Anthony Delio 
 hydroxychloroquine is the safest drug to use period,

- Original Message -
From: silver-list@eskimo.com
To:"silver-list@eskimo.com" 
Cc:
Sent:Mon, 20 Jul 2020 00:58:27 +
Subject:Re: CS>Practical information from OrMNS

 Hmmm, I'm a trained EIS, helping many family members.  
  N.

-
 FROM: Cyndiann Phillips 
SENT: Monday, 20 July 2020 4:05 AM
TO: silver-list@eskimo.com 
SUBJECT: Re: CS>Practical information from OrMNS     I'm a trained
herbalist, make a living on herbal remedies so there is that. The 
hydroxychloroquine was found to cause dangerous side effects and
should not be used for this. A study that was recently done was shut
down over that. Tony you've posted some fake news on here more than
once so follow your own advice.

Re: CS>silver rods

2020-07-20 Thread PT Ferrance 
If I start with some eis already in the jar when I fill it with distilled water 
2-3 hours.  If I start with straight distilled then longer... maybe 5 or 6?  
Your equipment is so reliable I kind of set it and forget it for a bit and 
haven't kept track of times in quite awhile.  
The interesting thing, to me, is that when I dry off the rods now they leave no 
black residue on the paper towel.  They used to leave black marks.  Is there 
anything that needs to be done to them to remove the white patina (sort of) on 
them?
The Tyndall line used to be fine and tight and now it is wider and fuzzy.
Thanks.PT
. 

On Monday, July 20, 2020, 07:12:49 AM EDT, Ode Coyote 
 wrote:  
 
 How long is it taking to run a 10 PPM batch?

On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance  wrote:

Hi, Lately I've noticed that when I clean my rods with a paper towel nothing 
comes off of them.  Also no black speckles in the eis and no light yellow 
color.  Laser shows a wider line and can almost see speckles in the line... not 
the nice tight line I used to get from my silver puppy.
Any ideas how to get things back to normal?Thanks.PT

Re: CS>silver rods

2020-07-20 Thread Maha-Abu 
Yes, just explaining how & why that works, BTW i used to have my own 
darkroom as a 12 year old, (66 now), light affects film because it is/was 
formed from silver nitrate, where the light hit, turned black/grey when 
processed, unexposed portions were removed in the developer. We then end up 
with the negative. We use this to reverse the process on silver nitrate 
coted paper, (2 x negative = positive) so, if the colloid is clear, it 
seems to indicate no light/impurity interaction (maybe the water used was 
purer than normal) ??


On 20 July 2020 1:24:27 pm Reid Harvey  wrote:

BTW, the beam of light in 3-D is due to the Tyndall Effect.

On Mon, Jul 20, 2020 at 8:18 AM Maha-Abu 
 wrote:
Hi normally i don't post but personally i would say these are good signs, 
the yellow colour i would say is due to slightly larger particles and 
slight oxidation causing reflections from light. The fact that there is no 
black residue would to me indicate a cleaner, less oxidised process, the 
fact we see the laser beam is because of refraction & reflection of the 
beam off of the silver, the wideer or more visible the beam, the higher the 
particle density and probably smaller particle size (which would also 
effect the wavelength, and there by colour you see, or don't see refracted 
in the colloid. If i am wrong please someone put me right. Open to ideas.


On 20 July 2020 12:12:49 pm Ode Coyote  wrote:

How long is it taking to run a 10 PPM batch?

On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance  wrote:
Hi, Lately I've noticed that when I clean my rods with a paper towel 
nothing comes off of them.  Also no black speckles in the eis and no light 
yellow color.  Laser shows a wider line and can almost see speckles in the 
line... not the nice tight line I used to get from my silver puppy.


Any ideas how to get things back to normal?
Thanks.
PT

Re: CS>silver rods

2020-07-20 Thread Reid Harvey 
BTW, the beam of light in 3-D is due to the Tyndall Effect.

On Mon, Jul 20, 2020 at 8:18 AM Maha-Abu 
wrote:

> Hi normally i don't post but personally i would say these are good signs,
> the yellow colour i would say is due to slightly larger particles and
> slight oxidation causing reflections from light. The fact that there is no
> black residue would to me indicate a cleaner, less oxidised process, the
> fact we see the laser beam is because of refraction & reflection of the
> beam off of the silver, the wideer or more visible the beam, the higher the
> particle density and probably smaller particle size (which would also
> effect the wavelength, and there by colour you see, or don't see refracted
> in the colloid. If i am wrong please someone put me right. Open to ideas.
>
> On 20 July 2020 12:12:49 pm Ode Coyote  wrote:
>
>> How long is it taking to run a 10 PPM batch?
>>
>> On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance 
>> wrote:
>>
>>> Hi, Lately I've noticed that when I clean my rods with a paper towel
>>> nothing comes off of them.  Also no black speckles in the eis and no light
>>> yellow color.  Laser shows a wider line and can almost see speckles in the
>>> line... not the nice tight line I used to get from my silver puppy.
>>>
>>> Any ideas how to get things back to normal?
>>> Thanks.
>>> PT
>>>
>>
>

Re: CS>silver rods

2020-07-20 Thread Maha-Abu 
Hi normally i don't post but personally i would say these are good signs, 
the yellow colour i would say is due to slightly larger particles and 
slight oxidation causing reflections from light. The fact that there is no 
black residue would to me indicate a cleaner, less oxidised process, the 
fact we see the laser beam is because of refraction & reflection of the 
beam off of the silver, the wideer or more visible the beam, the higher the 
particle density and probably smaller particle size (which would also 
effect the wavelength, and there by colour you see, or don't see refracted 
in the colloid. If i am wrong please someone put me right. Open to ideas.


On 20 July 2020 12:12:49 pm Ode Coyote  wrote:

How long is it taking to run a 10 PPM batch?

On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance  wrote:
Hi, Lately I've noticed that when I clean my rods with a paper towel 
nothing comes off of them.  Also no black speckles in the eis and no light 
yellow color.  Laser shows a wider line and can almost see speckles in the 
line... not the nice tight line I used to get from my silver puppy.


Any ideas how to get things back to normal?
Thanks.
PT

Re: CS>silver rods

2020-07-20 Thread Ode Coyote 
How long is it taking to run a 10 PPM batch?

On Sun, Jul 19, 2020 at 10:46 AM PT Ferrance  wrote:

> Hi, Lately I've noticed that when I clean my rods with a paper towel
> nothing comes off of them.  Also no black speckles in the eis and no light
> yellow color.  Laser shows a wider line and can almost see speckles in the
> line... not the nice tight line I used to get from my silver puppy.
>
> Any ideas how to get things back to normal?
> Thanks.
> PT
>