[speedtouch] problems with FreeBSD 5.2.1
I've been trying to run the speedtouch CVS driver on FreeBSD 5.2.1 without success. First of all, the Makefile scripts are broken and won't compile cleanly, the problem appears when 'sed' is executed. For example, the Makefile.in has: -e 's,@bindir\@,$(bindir),g' \ its missing a \ before the first @, it should be: -e 's,[EMAIL PROTECTED]@,$(bindir),g' \ also, lines like: $(edit) $ [EMAIL PROTECTED] should use correct redirection: $(edit) speedtouch-setup.in [EMAIL PROTECTED] Once all these mistakens are corrected in all the Makefile.in (two of them to be specific) then the driver compiles and installs without further problems. Now, getting to my second problem. Modem_run loads fine, but once i run ppp -ddial adsl i get a nice kernel panic: WARNING: Driver mistake: destroy_dev on 114/1 panic: don't do that Anyone has any details on this subject? I've gone through google and it seems there is a problem with the device entries (tun0 maybe?) that aren't created. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PLS. HELP!
Try my RPMS : http://grumz.dyndns.org/ADSL_FC2 mario wrote: Hello, I have been fighting with speedtouch and linux for the past four days, without success :-( Please, help me! I tried to follow the instruction at http://benoit.papillault.free.fr/speedtouch/user.en.php3 The best I get is: [ root]# pppd call adsl updetach using channel 2 Using interface ppp0 Connect: ppp0 -- /dev/pts/7 sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] . sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] LCP: timeout sending Config-Requests -- There is something wrong, I guess, with my installation/distro, since [ root]# modprobe usbcore FATAL: Module usbcore not found. I am on Fedora Core2, Linux 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 i386 GNU/Linux Also, it seems that dsmeg is alerting me on something, aa it outputs: PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 divert: not allocating divert_blk for non-ethernet device ppp1 . Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 PPP Deflate Compression module registered -- Also, the alcatel modem seems to be seen, since [EMAIL PROTECTED] root]# cat /proc/bus/usb/devices .. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D041AB57 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms A problem with the driver (i took that one from Windows)? . Is anybody over there able to give me some good hint? Thanks a lot Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PLS. HELP!
Sorry my ADSL connection seems to be out of service. I hope it will be available again tomorow morning. Fred RUAUDEL Frédéric wrote: Try my RPMS : http://grumz.dyndns.org/ADSL_FC2 mario wrote: Hello, I have been fighting with speedtouch and linux for the past four days, without success :-( Please, help me! I tried to follow the instruction at http://benoit.papillault.free.fr/speedtouch/user.en.php3 The best I get is: [ root]# pppd call adsl updetach using channel 2 Using interface ppp0 Connect: ppp0 -- /dev/pts/7 sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] . sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] LCP: timeout sending Config-Requests -- There is something wrong, I guess, with my installation/distro, since [ root]# modprobe usbcore FATAL: Module usbcore not found. I am on Fedora Core2, Linux 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 i386 GNU/Linux Also, it seems that dsmeg is alerting me on something, aa it outputs: PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 divert: not allocating divert_blk for non-ethernet device ppp1 . Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 PPP Deflate Compression module registered -- Also, the alcatel modem seems to be seen, since [EMAIL PROTECTED] root]# cat /proc/bus/usb/devices .. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D041AB57 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms A problem with the driver (i took that one from Windows)? . Is anybody over there able to give me some good hint? Thanks a lot Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: OpenBSD 3.5 + alcatel speedtouch usb
Alessio Piazza a écrit : Ok, OpenBSD 3.5 work fine with driver speedotouch-1.2 beta 2...thanks at all :) The compilation's phase was finished without errors...while I had problems with1.2 and 1.3 version, respect to make and make install session.. I'll attend future development ;) Bye, Alessio What was your problem with the 1.3 release? Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: problems with FreeBSD 5.2.1
Dimitrios a écrit : I've been trying to run the speedtouch CVS driver on FreeBSD 5.2.1 without success. First of all, the Makefile scripts are broken and won't compile cleanly, the problem appears when 'sed' is executed. For example, the Makefile.in has: -e 's,@bindir\@,$(bindir),g' \ its missing a \ before the first @, it should be: -e 's,[EMAIL PROTECTED]@,$(bindir),g' \ also, lines like: $(edit) $ [EMAIL PROTECTED] should use correct redirection: $(edit) speedtouch-setup.in [EMAIL PROTECTED] Once all these mistakens are corrected in all the Makefile.in (two of them to be specific) then the driver compiles and installs without further problems. I applied your suggestion in the CVS version. Could you test them ? (I only test them on GNU/Linux and I don't think it will harm on other platform). However, I already tested the code on FreeBSD 5.2.1 and do not have the problem you reported... Furthermore, I take the code from the info page of autoconf... You might also contact them to update their info page. Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
