Try my RPMS : http://grumz.dyndns.org/ADSL_FC2
mario wrote: >Hello, > >I have been fighting with speedtouch and linux for the past four days, >without success :-( >Please, help me! > >I tried to follow the instruction at >http://benoit.papillault.free.fr/speedtouch/user.en.php3 > > >The best I get is: > >[XXXX root]# pppd call adsl updetach >using channel 2 >Using interface ppp0 >Connect: ppp0 <--> /dev/pts/7 >sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] >......... >sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] >LCP: timeout sending Config-Requests >---------------------------------------------- > >There is something wrong, I guess, with my installation/distro, since > >[XXXX root]# modprobe usbcore >FATAL: Module usbcore not found. > >I am on Fedora Core2, >Linux XXXX 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 >i386 GNU/Linux > >Also, it seems that dsmeg is alerting me on something, aa it outputs: > >PPP generic driver version 2.4.2 >divert: not allocating divert_blk for non-ethernet device ppp0 >HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 >N_HDLC line discipline registered. >usb 2-1: bulk timeout on ep7out >usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 >usb 2-1: bulk timeout on ep7out >usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 >usb 2-1: bulk timeout on ep7out >usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 >Badness in local_bh_enable at kernel/softirq.c:136 >Call Trace: > [<02121d8e>] local_bh_enable+0x39/0x5c >....................................... > >divert: no divert_blk to free, ppp0 not ethernet >divert: not allocating divert_blk for non-ethernet device ppp0 >usb 2-1: bulk timeout on ep7out >usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 >divert: not allocating divert_blk for non-ethernet device ppp1 >............................. >Badness in local_bh_enable at kernel/softirq.c:136 >Call Trace: > [<02121d8e>] local_bh_enable+0x39/0x5c >............................... > >divert: no divert_blk to free, ppp0 not ethernet >divert: not allocating divert_blk for non-ethernet device ppp0 >PPP Deflate Compression module registered > >------------------ >Also, the alcatel modem seems to be seen, since > >[EMAIL PROTECTED] root]# cat /proc/bus/usb/devices >.......................................... > >T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 >D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >P: Vendor=06b9 ProdID=4061 Rev= 0.00 >S: Manufacturer=ALCATEL >S: Product=Speed Touch USB >S: SerialNumber=0090D041AB57 >C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA >I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms >I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms >E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms >E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms >E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms >E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms >E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms > >A problem with the driver (i took that one from Windows)? >......................................................... > > >Is anybody over there able to give me some good hint? >Thanks a lot > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
