[speedtouch] Re: Uploading/usr/local/bin/microcode.binfailed!
thank you very much that you care about my problem. looking forward to your next message. best regards. a.boesch /proc/interrupts before and after modem_run? interrupts_befor_modem_run_modem_not_inserted CPU0 0: 64076 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 1426 XT-PIC eth0 4: 5 XT-PIC serial 10: 0 XT-PIC usb-ohci 14: 21152 XT-PIC ide0 NMI: 0 ERR: 0 interrupts_befor_modem_run_modem_inserted CPU0 0: 104225 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 3331 XT-PIC eth0 4: 5 XT-PIC serial 10: 10 XT-PIC usb-ohci 14: 21730 XT-PIC ide0 NMI: 0 ERR: 0 interrupts_after_modem_run_modem_inserted: CPU0 0: 117482 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 3935 XT-PIC eth0 4: 5 XT-PIC serial 10: 62 XT-PIC usb-ohci 14: 21779 XT-PIC ide0 NMI: 0 ERR: 0 Recompile modules with CONFIG_USB_DEBUG May 14 17:21:34 victory syslogd 1.4-0: restart. May 14 17:21:34 victory syslog: syslogd startup succeeded May 14 17:21:34 victory kernel: klogd 1.4-0, log source = /proc/kmsg started. May 14 17:21:34 victory kernel: Inspecting /boot/System.map-2.4.4-2 May 14 17:21:34 victory syslog: klogd startup succeeded May 14 17:21:35 victory portmap: portmap startup succeeded May 14 17:21:36 victory rpc.statd[452]: Version 0.3.1 Starting May 14 17:21:36 victory nfslock: rpc.statd startup succeeded May 14 17:21:16 victory rc.sysinit: Mounting proc filesystem: succeeded May 14 17:21:16 victory sysctl: net.ipv4.ip_forward = 0 May 14 17:21:16 victory sysctl: net.ipv4.conf.all.rp_filter = 1 May 14 17:21:16 victory rc.sysinit: Configuring kernel parameters: succeeded May 14 17:21:16 victory date: Mon May 14 17:21:09 CEST 2001 May 14 17:21:16 victory rc.sysinit: Setting clock (localtime): Mon May 14 17:21:09 CEST 2001 succeeded May 14 17:21:16 victory rc.sysinit: Loading default keymap succeeded May 14 17:21:16 victory rc.sysinit: Setting default font (lat0-sun16): succeeded May 14 17:21:16 victory rc.sysinit: Activating swap partitions: succeeded May 14 17:21:16 victory rc.sysinit: Setting hostname victory: succeeded May 14 17:21:16 victory fsck: /: clean, 106456/326784 files, 368219/2423799 blocks May 14 17:21:16 victory rc.sysinit: Checking root filesystem succeeded May 14 17:21:16 victory rc.sysinit: Remounting root filesystem in read-write mode: succeeded May 14 17:21:16 victory hdparm: HDIO_SET_PIO_MODE failed: Function not implemented May 14 17:21:16 victory hdparm: attempting to set PIO mode to 4 May 14 17:21:17 victory rc.sysinit: Setting hard drive parameters for hda: succeeded May 14 17:21:17 victory rc.sysinit: Finding module dependencies: succeeded May 14 17:21:17 victory fsck: /boot: clean, 32/10040 files, 7979/40131 blocks May 14 17:21:17 victory rc.sysinit: Checking filesystems succeeded May 14 17:21:18 victory rc.sysinit: Mounting local filesystems: succeeded May 14 17:21:18 victory rc.sysinit: Turning on user and group quotas for local filesystems: succeeded May 14 17:21:20 victory rc.sysinit: Enabling swap space: succeeded May 14 17:21:22 victory init: Entering runlevel: 3 May 14 17:21:23 victory kudzu: Updating /etc/fstab succeeded May 14 17:21:29 victory kudzu: succeeded May 14 17:21:30 victory sysctl: net.ipv4.ip_forward = 0 May 14 17:21:30 victory sysctl: net.ipv4.conf.all.rp_filter = 1 May 14 17:21:30 victory network: Setting network parameters: succeeded May 14 17:21:32 victory network: Bringing up interface lo: succeeded May 14 17:21:34 victory network: Bringing up interface eth0: succeeded May 14 17:21:37 victory keytable: Loading keymap: May 14 17:21:38 victory kernel: Loaded 13742 symbols from /boot/System.map-2.4.4-2. May 14 17:21:38 victory kernel: Symbols match kernel version 2.4.4. May 14 17:21:38 victory kernel: No module symbols loaded. May 14 17:21:38 victory kernel: Linux version 2.4.4-2 (root@victory) (gcc version 2.96 2731 (Red Hat Linux 7.1 2.96-81)) #2 Fri May 11 12:09:37 CEST 2001 May 14 17:21:38 victory kernel: BIOS-provided physical RAM map: May 14 17:21:38 victory kernel: BIOS-e820: - 000a (usable) May 14 17:21:38 victory kernel: BIOS-e820: 000f - 0010 (reserved) May 14 17:21:38 victory kernel: BIOS-e820: 0010 - 0400 (usable) May 14 17:21:38 victory kernel: BIOS-e820: - 0001 (reserved) May 14 17:21:38 victory kernel: Scan SMP from c000 for 1024 bytes. May 14 17:21:38 victory kernel: Scan SMP from c009fc00 for
[speedtouch] Re: Uploading /usr/local/bin/microcode.binfailed!
Try with hdparm -u 1 and or -m 16 or change timeout line 254 in modem_run.c (BLOCK1 is 991 bytes - 5 ms). But this stuff failing every time, IDE are not that bad. sorry did not work. rised timeout from 100 to 1000 and then to 1. also tried hdparm settings but nothing changed. :( but the changement of the timeout worked. a.boesch Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
[speedtouch] Re: Uploading /usr/local/bin/microcode.bin failed!
BLOCK1 timeout is 100ms.
ok thats very fast !
What is your hdparm setting?
[root@victory bin]# hdparm -i /dev/hda
/dev/hda:
Model=IBM-DTTA-371010, FwRev=T77OA73A, SerialNo=WL0WLFE8567
Config={ HardSect NotMFM HdSw15uSec Fixed DTR10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=465kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=19746720
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 udma0 udma1 udma2
[root@victory bin]# hdparm -v /dev/hda
/dev/hda:
multcount= 0 (off)
I/O support = 3 (32-bit w/sync)
unmaskirq= 0 (off)
using_dma= 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead= 8 (on)
geometry = 1229/255/63, sectors = 19746720, start = 0
[root@victory bin]#
--
/etc/sysconfig/harddiskhda
USE_DMA=1
EIDE_32BIT=3
LOOKAHEAD=1
EXTRA_PARAMS=
--
Do you have another usb device, ie a working one:).
no. i'm sorry. but it looks all right. speedtouch is on green (both
lights). the devices file shows me my speedtouch, it worked only one time
and hardware works on windows.
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
[speedtouch] Uploading /usr/local/bin/microcode.bin failed!
Hi, i'am working now for 8 days on installing my speedtouch under linux. i had only ONE time the luck that my modem flashed like it does under windows then never again and i nearly tried everything hundred of times. reading all the FAQ and the postings here. when my modem flashed with the lights it was with an old driver version where i had to recompile my kernel with this experimental features :). same computer with same hardware runs under win95 with only one problem. after exactly 24 hours connection the line hangs up. provider is wanadoo.fr in france. does someone knows why? (might be wanadoo trying to get me off :) BUT the real problem follows know (Think there is no real timeout. Uploading faillure comes very fast): [root@victory admin]# modem_run -v -f /usr/local/bin/microcode.bin -m Gotcha, I found your ADSL ALCATEL SpeedTouch USB modem! best offset 0 with probability 100% best offset 523420 with probability 100% BLOCK1: Connection timed out Uploading /usr/local/bin/microcode.bin failed! Continuing anyway ... get_reference: usbfs_control_msg: Connection timed out URB147: Connection timed out URB148: Connection timed out URB149: Connection timed out URB150: Connection timed out my_usb_control_msg: usbfs_control_msg: Connection timed out === modem state at Thu May 10 17:44:44 2001 === c0 12 0007 : 00 . c0 12 000b : 00 00 00 00 00 00 00 00 c0 12 000d : 00 00 00 00 c0 01 000e : 00 . c0 01 000f : 00 . ADSL line is down ENVIRONMENT: -- [root@victory admin]# mount /dev/hda6 on / type ext2 (rw) none on /proc type proc (rw) /dev/hda1 on /boot type ext2 (rw) none on /dev/pts type devpts (rw,gid=5,mode=620) none on /proc/bus/usb type usbdevfs (rw) [root@victory admin]# -- - pppd_version_2.4.0 - Linux victory 2.4.4-0 #1 Wed May 9 12:30:50 CEST 2001 i586 unknown - modem_run version $Name: tar_gz_09052001 $ -- /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=c4828000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D00CB711 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl= 0ms -- usb-controller: PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 2). Master Capable. Latency=64. Bus 0, device 7, function 0: ISA bridge: Intel Corporation 82371FB PIIX ISA [Triton I] (rev 2). Bus 0, device 7, function 1: IDE interface: Intel Corporation 82371FB PIIX IDE [Triton I] (rev 2). Master Capable. Latency=64. I/O at 0xf000 [0xf00f]. Bus 0, device 8, function 0: VGA compatible controller: S3 Inc. 86c968 [Vision 968 VRAM] rev 0 (rev 0). IRQ 11. Non-prefetchable 32 bit memory at 0x1000 [0x13ff]. Bus 0, device 10, function 0: USB Controller: CMD Technology Inc USB0670 (rev 6). IRQ 10. Master Capable. No bursts. Min Gnt=2.Max Lat=4. Non-prefetchable 32 bit memory at 0xe400 [0xe4000fff]. -- /var/log/messages May 9 17:22:51 victory syslogd 1.4-0: restart. May 9 17:22:51 victory syslog: syslogd startup succeeded May 9 17:22:51 victory kernel: klogd 1.4-0, log source = /proc/kmsg started. May 9 17:22:51 victory kernel: Inspecting /boot/System.map-2.4.4-0 May 9 17:22:51 victory syslog: klogd
