Re: [SlimDevices: SqueezeCenter] Radio streams stopping after a bit
Can you temporarily wire your SB3 and see if the issue persists? WiFi is often the cause of these sorts of issues VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s *Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3 -> Onkyo CRN755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s Everything controlled by iPeng d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] Radio streams stopping after a bit
No 192.168.22.39 is my iPad. So all errors in the log seem to pertain to my iPad. I can't see any logs that pertain to my Squeezebox. BTW, 'Radio' in my previous post meant the radio application of LMS. Squid's Profile: http://forums.slimdevices.com/member.php?userid=9073 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] C-3PO plugin, a trnscoding helper.
soundcheck wrote: > Hi. > > Just had a quick look at the plugin. > > I'm wondering if I can set the phase manually instead of using the > predefined definitions (linear/...)? > Or if that would be a nice2have feature!?!? > sox offers it. > > > > > I've also seen that earlier was mentioned that sox uses 64bit. Afaik > that's only partly correct. > At least the standard sox uses 32bit on all its effects, which would > include "rate". > Is that different for the sox being used by the plugin? i guess we are all curious to know more about archimago's magical "extremus filter", a squeezelite recipe that goes like "v::3.05:28:99.7:100:45". (http://archimago.blogspot.com/2018/11/musings-raspberry-pi-3-b-touch.html) 45 at the end here is the phase response, a manual setting between minimum and linear, which the c-3po plugin does not currently support. i tired these settings with squeezelite and did not really care for them. but i am a big believer in server side transcoding/resampling and would like to try the above recipe with c-3po. i am getting phenomenal results with the -h option, which in my experience, is the real secret sauce but i am looking forward to hearing marco's comments as to how to implement (or approximate) this brick wall filter using c-3po mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702 View this thread: http://forums.slimdevices.com/showthread.php?t=105309 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] Radio streams stopping after a bit
Squid wrote: > > What si rthe IP address of the Radio ? Is it1 92.168.22.39 ? > > Stopping a stream will not normally generate an error message - so any > error message have to be considered and if possible eliminated. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS on EX4100 prompts for update
mherger wrote: > You should get in touch with the WD community. It's a topic there, eg. > https://community.wd.com/t/how-do-i-update-the-squeezebox-server-on-my-wd-pr4100/219583 > > -- > > Michael Thanks for the link, I'll check it out. explor202's Profile: http://forums.slimdevices.com/member.php?userid=68940 View this thread: http://forums.slimdevices.com/showthread.php?t=110165 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] Radio streams stopping after a bit
Sorry, meant to provide more details but then forgot. LMS is v7.9.1 on a Windows 10 Pro server. Server is wired (1Gbps) to the router, but both the Squeezebox 3 and the iPad/Squeezepad connect to the router wirelessly. Radio stations I tried with are local ones here in Belgium (Q-Music, Stu Bru, MNM..). I provided the logs because I indeed see errors there, although I have no clue what they pertain to. The only real issue I have is that radio stops playing at a random point, even though on the Squeezebox itself, it doesn't show as if stopped. Display is still up with name of the station. Squid's Profile: http://forums.slimdevices.com/member.php?userid=9073 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS on EX4100 prompts for update
You should get in touch with the WD community. It's a topic there, eg. https://community.wd.com/t/how-do-i-update-the-squeezebox-server-on-my-wd-pr4100/219583 -- Michael ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] Radio streams stopping after a bit
Looks like you could have a network issue since some network errors from slimproto More info please. Version of LMS What type of server ? what version of windows ? Network setup (e.g. wireless between router and server , wireless between server and player etc) What station being played ? Why are you having plugin error messages ? (Squeezepad and Classic shouldn't be using uPNP stuff) bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] LMS on EX4100 prompts for update
mherger wrote: > > > How did you install it in the first place? > > -- > > Michael LMS Version 7.7.2 - r33893 was preinstalled (my PR4100 has it too). Of course now that I add the image of the installer, I see it's called SqueezeCenter and not LMS, does that make any difference? The update message says LMS and the link takes me to www.mysqueezebox.com/download. 26725 +---+ |Filename: ScreenShot001.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=26725| +---+ explor202's Profile: http://forums.slimdevices.com/member.php?userid=68940 View this thread: http://forums.slimdevices.com/showthread.php?t=110165 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] C-3PO plugin, a trnscoding helper.
HumanMedia wrote: > Another few questions: > > * In player settings, Transcoder settings, if I uncheck stdlin for FLAC > they no longer play at all. > > STDIN is mandatory for QOBUZ and other plugins, not for local files playback, but you need one of STDIN/SEARCH to be enabled. HumanMedia wrote: > > > But setting it upsamples all FLAC of any datarate to 768. Is there > anyway of having FLAC upsample to the closest synchronous supported? No, at moment you could not select a different output sample rate based on different codecs. HumanMedia wrote: > > > * What is the default recommended Phase Response setting? Whats are the > pros and cons of each setting? >From the SOX manual: All resamplers use filters that can sometimes create echo (a.k.a. ringing) artefacts with transient signals such as those that occur with finger snaps or other highly percussive sounds. Such artefacts are much more noticeable to the human ear if they occur before the transient (pre-echo) than if they occur after it (post-echo). Note that frequency of any such artefacts is related to the smaller of the original and new sampling rates but that if this is at least 44.1kHz, then the artefacts will lie outside the range of human hearing. A phase response setting may be used to control the distribution of any transient echo between pre and post: with minimum phase, there is no pre-echo but the longest post-echo; with linear phase, pre and post echo are in equal amounts (in signal terms, but not audibility terms); the intermediate phase setting attempts to find the best compromise by selecting a small length (and level) of pre-echo and a medium lengthed post-echo. As a general rule: using starting and target saple rate well over 44.100 you could safetly use linear. Upsampling from 44100 you could use linear or intermediate, downsampling to 44100 or less OR upsampling form sampe rates lesser than 44100 you should use minimal. That said, if that really matter is debatable. Sure is much more important the Minimal band-width: Over 99% (990) artifact are liekely to be produced, 90.7% (907) is the bias point: no artifacts should be produced under this point, 95% (950) is the 'commonly' advised level. HumanMedia wrote: > > > * I take it that 'Automatic Headroom' give the -3db headroom, and that > Manual gain in db simply adds to that? Is that correct? (so Automatic > Headroom TRUE and Manual gain of 3db, gives a total of 6db headroom? from the SOX manual: Playing an audio file often involves resampling, and processing by analogue components can introduce a small DC offset and/or amplification, all of which can produce distortion if the audio signal level was initially too close to the clipping point. For these reasons, it is usual to make sure that an audio files signal level has some headroom, i.e. it does not exceed a particular level below the maximum possible level for the given representation. Some standards bodies recommend as much as 9dB headroom, but in most cases, 3dB ( 70% linear) is enough. Note that this wisdom seems to have been lost in modern music production; in fact, many CDs, MP3s, etc. are now mastered at levels above 0dBFS i.e. the audio is clipped as delivered. The h option is used to apply gain to provide head-room for subsequent processing. So Automatic Headroom is not a fixed value, is internally calculated to provide 'just enough'. There is no simple way to know how much negatve gain is automaticalyy added but yes, Manual gain in db, is added on top of that. HumanMedia wrote: > > > * DSD-128 and higher no longer play, but DSD64 does. I have the DSDplay > plugin installed - is this interfering? It depends on the player. If Squeezelite compiled with DSD option DSDPlay shoul only pass thought, BUT via DOP (max DSD64). Some squeezelite versions (Squeezelite-R2 and even new versions form Ralphy) could play native DSD, but in order to take advantage of it you MUST disable DSDPlay. Hope is clear enough, please forgive my english, as usual. Author of C-3PO plugin, Squeezelite-R2, Falcon Web interface - See www.marcoc1712.it marcoc1712's Profile: http://forums.slimdevices.com/member.php?userid=34842 View this thread: http://forums.slimdevices.com/showthread.php?t=105309 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] Album grouping buckets
Do I understand correctly: If I have x albums like "Études": - An "É pocket" will be created (and x entries reserved for that). - The album will be sorted in the "E pocket" regardless. - The count for "E" albums is wrong (+x, because É is counted, too). - That results in shifting the last x "E" entries into the "É pocket". That would match my observation. QLMS 7.9.2@2.03.21 x64 (digimaster) / QNAP 469L QTS 4.3.4 dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663 View this thread: http://forums.slimdevices.com/showthread.php?t=110147 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
[SlimDevices: SqueezeCenter] Radio streams stopping after a bit
I have a problem with playing radio streams. I can start a stream via Radio -> Local -> Stations -> any station, or by just hitting Play when I also last played the radio station. However, after a while, the stream just stops playing. This can be after an hour or after 5 minutes. I checked multiple stations and all stations have the problem. Also, this is normally on my Squeezebox Classic, but I tested with the SqueezePad app on my iPad and it behaves the same as well. So I think it's an issue with my LMS. However, I can't see anything in the logs related to this. No new log entries when the problem occurs. I do see other errors/warnings but they are not related AFAIK. [19-02-09 12:53:00.3237] Slim::Networking::Slimproto::client_readable (414) Client not found for slimproto msg op: STAT from 192.168.22.39 [19-02-09 12:53:45.1222] Slim::Utils::OS::Win32::getPriorityClass (752) Error: Slim::Utils::LogCan't get process handle () [Wrong number of parameters: expected 0, got 1. ] [19-02-09 13:23:15.2744] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/AVTransport.pm line 216. [19-02-09 13:23:16.0391] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/RenderingControl.pm line 161. [19-02-09 21:54:55.4204] Slim::Networking::Slimproto::client_readable (414) Client not found for slimproto msg op: STAT from 192.168.22.39 [19-02-09 22:25:07.1026] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/RenderingControl.pm line 161. [19-02-09 22:25:07.1099] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/AVTransport.pm line 216. [19-02-09 22:30:15.0079] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/RenderingControl.pm line 161. [19-02-09 22:30:15.0090] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/AVTransport.pm line 216. [19-02-10 09:42:25.0833] Slim::Networking::Slimproto::client_readable (414) Client not found for slimproto msg op: STAT from 192.168.22.39 [19-02-10 10:12:55.1336] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/AVTransport.pm line 216. [19-02-10 10:12:57.0269] Slim::Utils::Timers::__ANON__ (273) Error: Timer Slim::Plugin::UPnP::Events::expire failed: Can't call method "pluginData" on an undefined value at C:/PROGRA~2/SQUEEZ~1/server/Slim/Plugin/UPnP/MediaRenderer/RenderingControl.pm line 161. [19-02-10 11:41:16.5985] Slim::Networking::Slimproto::client_readable (414) Client not found for slimproto msg op: STAT from 192.168.22.39 Squid's Profile: http://forums.slimdevices.com/member.php?userid=9073 View this thread: http://forums.slimdevices.com/showthread.php?t=110166 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Re: [SlimDevices: SqueezeCenter] C-3PO plugin, a trnscoding helper.
HumanMedia wrote: > Problem fixed! > In transcoding helper settings page, the Buffer Size was set to 128. (is > it that by default before multithread is checked?) > Anyways set it to the recommended "32" for multithread and everything > works perfectly and smoothly, even upscaling 352khz material. The default is 32, but normally a bigger buffer means smoother playback unless you get short of memory. Author of C-3PO plugin, Squeezelite-R2, Falcon Web interface - See www.marcoc1712.it marcoc1712's Profile: http://forums.slimdevices.com/member.php?userid=34842 View this thread: http://forums.slimdevices.com/showthread.php?t=105309 ___ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter
