Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-07 Thread digimaster

Could be that MusicIP will not load on some Qnap systems.
Try installing QOptware-NG, and then restart QLogitechMediaServer.

I took version 1.09b out, because on some Qnap older systems there where
trouble.
Working on a new release, where it should be solved.
The thing is LogitechMediaServer, stop support for Perl 32 bits from
5.20 and up.
So have to go back to perl 5.18 or lower, to make things work.

But almost there, to bring out the newer release with shairtunes
support.

yeomanspc wrote: 
> Just did a complete re-install of the backup NAS (changed all the disks)
> - a 569pro on QTS 4.3.4 iirc. I note that the QNapclub loads up 1.08
> version.  Was expecting 1.9b?
> Having a problem with MusicIP - does not seem to load.  Can’t remember
> if I need to do anything additional to get MIP installed.  It seems to
> work fine on the prod system.
> 
> 
> Sent from my iPhone using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-11 Thread digimaster


Oke well i'm using a ts-453a myself.

You should check in the appcenter off you're QNap, if any of the
meantion programs are installed.
If so please uninstall them, before you install QLogitechMediaServer, to
prevend any conflict.

QOptware does not need to be installed, but add some extra functions
like lame support and wma playback.


Gorille wrote: 
> Hi Digimaster and all,
> 
> Completely fresh at all this so please bear the stupid questions.
> I reach you gys while investigating since several days a way to
> implement a versatile HiFi multi room environement which doesn't rely on
> any prorietary protocol/system such as Sono, Heos etc...
> My intention is to use my QNAP TS4543a as a music server. I do it
> already using QMusic but only to feed my main analog amplifier (via the
> QNAP audio jack output) or stream via Wifi to my phone (Android) and
> iPad then using Bluetooth speaker.
> 
> My intention is to be able to stream over Wifi lossless to a DAC that
> will feed my analog amplifier but also to other wireless speakers (or
> all in one systems like Naim Muso QB etc...). Of course I would like to
> have possibility to synchronise the music in the different rooms orpush
> different musics in each room. I beleive one of the only way to avoid
> being stuck with a specific brand/echosystem for the speakers would be
> to use UpNp (I,m not sure though...)
> 
> So here I am now as I'd like to see how much LMS can help me to achieve
> this :-)
> 
> I was about to install LMS from QNAP Club but saw some comments about
> installation pre-requisits and I have some questions :
> 
> - 1 - Before installing login to you're QNap by ssh shell and do uname
> -m, it should then say x86_64/x86/i386/i686. Also check if
> /lib/ld-linux.so.2 and/or /lib/ld-linux-x86-64.so.2 exist on youre QNap
> system
> --> This is OK
> 
> - 2 - SSOTS/SSODS, QPerl, Perl or any other LMS, perl software should
> not be installed. 
> -> How can I check this?
> 
> - 3 - Would advice's to uses QOptware-NG, which will also make you're
> QTS4.3 run ELF32/32 bits programs again !
> --> Do I need this and what would this bring me? And how to install it?
> 
> Sorry it's a lot of question. I hope you can help me with this
> 
> Cheers
> 
> Gorille



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-12 Thread digimaster


*
New beta for QLogitechMediaServer, 1.09.e

 QLMS 1.09.e ==
Changed Name to QLMS, so one can install it beside QLogitechMediaServer
for testing purposes.
To run it, QLogitechMediaServer, must be disabled through the Qnap app
center.
It will copy existing setting, if QLogitechMediaServer is installed.

Due to the fact, that the was trouble with some older QNap nas systems.
Completely redisgned the installion and startup script.
The release will have separated files, for the different arch's.
Also done this, to later add ARM support.

The 1.09.e x86_64, has perl 5.24.4 and support for spotty and
shairtunes.
The 1.09.e has perl 5.16 x86 and also support for spotty and
shairtunes.
( This because LMS has no support anymore for perl 5.20 and higher on
32bits. )

Furthermore tried to improve some functions.
On a x86_64 one can change, between to different perl version.
Go trouble go to .qpkg/QLMS directory and do [/bin/ls -a].
Then do rm .ELF??, and then .ELF??. ( depends what is there, you can
choice between .ELF64 of .ELF32 )
Still trouble, try installing the x86 version, which also will work on a
x86_64 system.

Keep in mind, this is a really beta version.
So keep you're QLogitechMediaServer installed.

'QLMS 1.09.e x86_64' (http://bit.ly/2w4NUvo)
'QLMS 1.09.e x86' (http://bit.ly/2MCIkHL)


*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-13 Thread digimaster


dolodobendan wrote: 
> Works great so far!

That great, could you supply me with following information ?

Any input would be great, need info on what systems it runs or not.

Please included you’re QTS version, the output off uname -m.
Also where ld-linux.so.2 and ld-linux-86_64.so.2 are located ?

Need this info to determine, how make a correct working qpkg file.
So it will install proper, on new and older QNap nas-systems.

So this input would be very helpfully, for further development.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-22 Thread digimaster

epo wrote: 
> Hi 
> 
> Have tried to install version 1.09e for sharetunes support, but it
> doesn't open the web gui when i try to connect to QLMS. No connection is
> found. It wasn't any problem with version 1.08? What can i do? 
> 
> Have installed it on a TS-459 pro+. 
> 
> Thanks. 
> 
> //EpoOké what QTS version are you using?

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-22 Thread digimaster


Stalksy wrote: 
> I have installed 1.09e and appears to be running well but spotify and
> local media appears to play and google home mini chirps as it comes
> online but while the track time runs through the audio doesnt make it.
> 
> I have tried on another google home and google mini with the same
> results.
> 
> QNAP is 453-Pro Firmware 4.3.4
> 
> Thanks
> 
> Simon.Could you tell me more on you're configuration. Don't know if it works
with Google home and mini. Have no information regarding those.



Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-22 Thread digimaster

epo wrote: 
> i'm running version 4.2.6 .Oké on some older Qnap nassystem with QTS lower 
> then 4.3, this happens.
Due to the facted, some libraries are missing in the systeem. Working on
a solution for this. Some give me some time. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-08-27 Thread digimaster


After a lot off testing looking and investigations, found the trouble.
Its a missing file in you're /lib, which is causing this error.
On some older QNap system the Glibc libary is not compleet.

Working on a solution, so hopefully have a new version which will fix it
soon.


epo wrote: 
> Thanks a lot. I will head back to my unstable mac LMS and give you some
> time. :)



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-01 Thread digimaster


I've it worked fine, i would suggest to ask some where else in the
forum.
Has nothing to do with the devolpment from QLogitechMediaServer for QNap
on it self.


spile wrote: 
> I am running Logitech Media Server Version: 7.9.2  on a QNAP TS-251 and
> have issues with scanning in that my albums have are appearing multiple
> times. 
> For example, if I navigate to Home > Artists > ACDC I get...
> Black Ice
> Black Ice
> Black Ice
> Black Ice
> Black Ice
> Black Ice
> All songs
> 
> The server logs is showing...
> [18-08-31 15:06:54.3898] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1533559127, Mon Aug  6 15:19:31 CEST 2018) perl 5.024000 -
> x86_64-linux-thread-multi
> [18-08-31 15:06:56.0700] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-08-31 15:06:56.1654] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-08-31 15:06:57.0529] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-08-31 15:06:57.1423] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-08-31 15:06:57.4145] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-08-31 15:07:03.8972] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-08-31 15:07:04.0324] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-08-31 20:15:05.9569] Slim::Utils::Misc::findAndScanDirectoryTree
> (1032) Error: Couldn't find a topLevelObj!
> ...
> 
> The scan log is showing a number of errors...
> [18-09-01 13:57:50.5737] Slim::Formats::Playlists::CUE::parse (473)
> Error: Couldn't find referenced FILE:
> 
> My installation was working fine a few weeks ago. I've even reinstalled
> the QLMS but the issue remains. Any ideas?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-03 Thread digimaster

digimaster wrote: 
> After a lot off testing looking and investigations, found the trouble.
> Its a missing file in you're /lib, which is causing this error.
> On some older QNap system the Glibc libary is not compleet.
> 
> Working on a solution, so hopefully have a new version which will fix it
> soon.Oké working on a complet new version of QLogitechMediaServer. Completely
redesign it. And will on a new other way, so it will also work on older
Qnap systems. But as I am very far, still needs a lot of testing, before
I will release it.

Will have a new name Qlms, so it will be clear that the aproces it on a
bother level.

So give me some time to round it up.
And keep checking here, for it's release. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-09 Thread digimaster


dkorbee wrote: 
> First of all; digimaster, thank you for the great work.
> 
> I installed QLMS 1.9e from scratch a few days ago on QNAP TS-653pro with
> QTS version 4.3.4.0675
> 
> /lib/ld-linux-x86-64.so.2 is available and is a symbolic link to
> /lib/ld-2.21.so
> 
> uname -m shows: x86_64
> 
> So far Logitech Media Server works great; mediascan of my music
> collection of 16000+ songs runs without any problems.
> 
> The only problem is that after a while (a couple of hours, i think) the
> slimserver.pl process suddenly generates al lot of IO; even when I'm not
> using the Logitech Media Server or listening music at all.
> 
> In "top" my QNAP gets an average load of 9+; CPU or MEM usage is not the
> problem; "iotop" shows that the slimserver.pl process is constantely
> reading and writing to disk.
> 
> When I stop QLMS, the average load drops back to 1-Strange behavior, at the 
> moment can't give you a clue. But keep in mind
is a beta.

At the moment, working on a new release. And trying several options, to
let work on all the different Qnap systems and configuration.

But that's a lot to find out. So it's gone take some more. As I'm
developing it beside work and a studie. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-18 Thread digimaster


tschu wrote: 
> Hi there 
> www qnapclub eu/nl/qpkg/545 only points me to the old version 1.08 (or
> older) but none of the updated 1.09x
> Am I missing something?
> /Thomas 
> 
> Gesendet von meinem SM-G930F mit TapatalkSorry redraw test version 1.09.
Because on some older Qnap nassystem, there was a problem with missing
libaries.

At the moment working on a new releases, where those will be included.
But it needs a lot off investigation, reading and testing.

Hope to releases it, in a few weeks. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-09-18 Thread digimaster


jasell wrote: 
> Hi,
> QLMS has worked flawlessly for the past year or so!
> Performance is much better than the old SSOTS solution.
> 
> Just recently I made a stop & start to retrieve the last update as a
> regular maintenance job.
> I made an upgrade from 7.9.2 something to latest 7.9.2 1536946607
> 
> It seems as the latest LMS 7.9.2 need some new libraries to support
> Flac, like GLIBC_2.7
> 
> This is an extract from fro my log when trying to play Spotty with Flac
> transcoding:
> > 
Code:

  >   > 
  > [22:12:16 17-09-2018] Stopping LogitechMediaServer [13722] in the 
Background.
  > [22:12:39 17-09-2018] Starting LogitechMediaServer in Background.
  > [22:12:40 17-09-2018] Please wait a few minuts, before you try to access 
the webgui through http://192.168.6.3:9001!
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: 
ErrorImpl { code: EofWhileParsingValue, line: 1, column: 0 }', 
libcore/result.rs:945:5
  > note: Run with `RUST_BACKTRACE=1` for a backtrace.
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: 
ErrorImpl { code: EofWhileParsingValue, line: 1, column: 0 }', 
libcore/result.rs:945:5
  > note: Run with `RUST_BACKTRACE=1` for a backtrace.
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > 

> > 
> 
> Is it possible to update qLMS to include this?
> 
> Many thanks in advanced...Yes that will be possible.
But that's why I'm looking at a way, to prevent that kind off errors. I
think to have a solution for this. But please give me some time. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.s

Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-09-18 Thread digimaster


earthbased wrote: 
> Yes, if auto-update is enabled which I think is the default setting.Go to 
> .qpkg/LogitehMediaServer directory, and edit the file.
Qlms.config. But a # in front off nightly and update, or change 1 into
0. Then save the file, and auto update is disabled. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-09-19 Thread digimaster


jasell wrote: 
> Hi,
> QLMS has worked flawlessly for the past year or so!
> Performance is much better than the old SSOTS solution.
> 
> Just recently I made a stop & start to retrieve the last update as a
> regular maintenance job.
> I made an upgrade from 7.9.2 something to latest 7.9.2 1536946607
> 
> It seems as the latest LMS 7.9.2 need some new libraries to support
> Flac, like GLIBC_2.7
> 
> This is an extract from fro my log when trying to play Spotty with Flac
> transcoding:
> > 
Code:

  >   > 
  > [22:12:16 17-09-2018] Stopping LogitechMediaServer [13722] in the 
Background.
  > [22:12:39 17-09-2018] Starting LogitechMediaServer in Background.
  > [22:12:40 17-09-2018] Please wait a few minuts, before you try to access 
the webgui through http://192.168.6.3:9001!
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: 
ErrorImpl { code: EofWhileParsingValue, line: 1, column: 0 }', 
libcore/result.rs:945:5
  > note: Run with `RUST_BACKTRACE=1` for a backtrace.
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: 
ErrorImpl { code: EofWhileParsingValue, line: 1, column: 0 }', 
libcore/result.rs:945:5
  > note: Run with `RUST_BACKTRACE=1` for a backtrace.
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac: 
/lib/libc.so.6: version `GLIBC_2.7' not found (required by 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/flac)
  > 

> > 
> 
> Is it possible to update qLMS to include this?
> 
> Many thanks in advanced...Did you report this to Michael, because normally 
> the included file are
static. So they don't need extra libaries.

Another thing you could do, if you have available on you Qnap, rename
the flac included in lms to flac.org. Then lms will find the other flac
and uses that one. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*
---

Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-21 Thread digimaster

That a bit you`re own choice.
Because out off the box QLogitechMediaServer, will update always to the
latest nightly version off LMS.
And sure one could have to adjust some thing some times, but its a
choice one makes.

On the other hand, one could disable this feature, or even go back to
the latest officieel version always and only choice to update to a new
officieel version when available.
So reading you`re post, a bit surprised what you wrote, because it`s
you`re choice to follow the nightly updates.
You could simply change it, by changing NIGTHLY=1 to NIGHTLY=0 in the
.QLMS.conf file. Then no nightly update will be installed anymore.
And is you remove .INSTALLED file from the SlimServer directory, and
them restart the latest officieel version will be installed.
Our if you`re happy with the latest, and don`t want the auto update
feature, also set UPDATE=1 to UPDATE=0 in the .QLMS.conf file.
And still if you want to update it, but Manuel download the right file,
and put in the download share off the QNap.
Then after restarting the QLogitechMediaServer, it will find it, and do
the update.

Strangely enough, also those thing, are more then once explained here,
and one could read it in the in closed readme file.

So my suggestion to you would be. logon by ssh shell.
Do (cd /share/*/.qpkg/LogitechMediaServer 0, then edit the file
.QLMS.conf.
And change UPDATE and NIGHTLY both from 1 to 0, or put a # in front off
those lines.
Save the file, and then do ( rm SlimServer/.INSTALLED ).
Now do ( ./LogitechMediaServer.sh restart ), it will set back you`re LMS
to the latest officieel version, and all auto update features are
disabled.


yeomanspc wrote: 
> It really irritates me to have QNAP NAS’s sitting there in theory
> perfectly capable of running LMS but then running LMS on a PI.  I do run
> LMS on my NAS’s, but I also run LMS on an  Odroid (Pi-like) with
> Max2Play at work.  The  QNAP hosted LMS (supporting 13 players) is kinda
> ok but does require a kick every month to sort some kind of glitch.  The
> ‘Pi’ on the other hand just runs. I might look at it once every 6
> months - once it went 10 months.  I just forget about it.  So unless you
> like the challenge, it really is better to install LMS on a Pi - just
> don’t forget where it is in the house.
> 
> 
> Sent from my iPhone using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-09-21 Thread digimaster

That a bit you`re own choice.
Because out off the box QLogitechMediaServer, will update always to the
latest nightly version off LMS.
And sure one could have to adjust some thing some times, but its a
choice one makes.

On the other hand, one could disable this feature, or even go back to
the latest officieel version always and only choice to update to a new
officieel version when available.
So reading you`re post, a bit surprised what you wrote, because it`s
you`re choice to follow the nightly updates.
You could simply change it, by changing NIGTHLY=1 to NIGHTLY=0 in the
.QLMS.conf file. Then no nightly update will be installed anymore.
And is you remove .INSTALLED file from the SlimServer directory, and
them restart the latest officieel version will be installed.
Our if you`re happy with the latest, and don`t want the auto update
feature, also set UPDATE=1 to UPDATE=0 in the .QLMS.conf file.
And still if you want to update it, but Manuel download the right file,
and put in the download share off the QNap.
Then after restarting the QLogitechMediaServer, it will find it, and do
the update.

Strangely enough, also those thing, are more then once explained here,
and one could read it in the in closed readme file.

So my suggestion to you would be. logon by ssh shell on you`re QNap.
Do (cd /share/*/.qpkg/LogitechMediaServer ), then edit the file
.QLMS.conf.
And change UPDATE and NIGHTLY both from 1 to 0, or put a # in front off
those lines.
Save the file, and then do ( rm SlimServer/.INSTALLED ).
Now do ( ./LogitechMediaServer.sh restart ), it will set back you`re LMS
to the latest officieel version, and all auto update features are
disabled.


yeomanspc wrote: 
> It really irritates me to have QNAP NASÂ’s sitting there in theory
> perfectly capable of running LMS but then running LMS on a PI.  I do run
> LMS on my NASÂ’s, but I also run LMS on an  Odroid (Pi-like) with
> Max2Play at work.  The  QNAP hosted LMS (supporting 13 players) is kinda
> ok but does require a kick every month to sort some kind of glitch.  The
> ‘Pi’ on the other hand just runs. I might look at it once
> every 6 months - once it went 10 months.  I just forget about it.  So
> unless you like the challenge, it really is better to install LMS on a
> Pi - just donÂ’t forget where it is in the house.
> 
> 
> Sent from my iPhone using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-09-25 Thread digimaster


ralphy wrote: 
> Can you login to a shell on the NAS and try to run
> /share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/i386-linux/faad
> ?
> 
> faad was updated about a year ago but using a different build system
> than the recent flac update.I'm al most ready to release a new version
This will work completely different, and hopefully will solve those
issue's. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-10 Thread digimaster


*
And here it is, a complet new release from QLMS ( formely know as
QLogitechMediaServer.
Totaly redesigned and a new way off work.
>From version 1.10 it runs in a chroot, so it wont relay on any older
software from QTS.

Remember this is a beta version.
And it was a big deal finding out al the proper solutions.
Please test it, can be installed a side any other LMS software like
QLogitechMediaServer, perl or ssots.
I will need the chroot command to be availble, as thats the only
commands i need to work!
Having issues, please put in here with the QMLS.log and QLMS.log.err if
it exist.

'QLMS 1.10 beta for QNap X86_64' (http://bit.ly/2EeWFuu)
'QLMS 1.10 beta for QNap X86' (http://bit.ly/2Nx5e36)


 QLMS version 1.10.beta ===
+ Completly changed to a new way off using LMS
+ It will chroot lms, to get max support also on older QNAP nassystems
!
+ Through this no trouble on older Glibc support.
+ Has not conflict from other installed perl or software like SSOTS
+ MusicIP also will run in a chroot, so it also will have no trouble or
missing some libaryś
+ Out off the box, no suppoort for the nightly beta releases. Can be
adjust
by editing the .QLMS.conf file in the QLMS directory !.
- Remeber this is the first release, so still in beta delevopment !
Plugins Spotty, YouTube, Radio Paradise, SqueezeSubsonic and
Shairtunes2, will work on this version. 

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-12 Thread digimaster


frch260246 wrote: 
> I installed QLMS 1.10 on my TS-253 QTS 4.2.0 yesterday and I have
> experienced the same problem concerning internet acess as you have
> described. Fortunately I kept my old 7.8.1 installation so I could just
> switch back to this version. Internet acess from 7.8.1 still works fine.
> I hope a solution for this problem will be found soon so that I can
> forget about  LMS 7.8.1 and proceed to upgrade my TS-253 to QTS 4.3

Same if you could please send me reqeust info.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


THE NICE'S THING ABOUT QLMS, IT CAN RUN BESIDE ANY OTHER LMS SOFTWARE
LIKE QLOGITECHMEDIASERVER OR SSOTS/SSODS.
AND YES ON INSTALLATION, IT WILL LOOK IF QLOGITECHMEDIASERVER IS
INSTALLED.
AND IF IT IS, WILL COPY THE CACHE AND PREF DIRECTORY!

IF YOU WANT TO TEST ON A CLEAN INSTALL, STOP QLMS AFTER INSTALLATION.
GO IN TO A SSH SHELL, AND REMOVE .QPKG/QLMS/SLIMSERVER/CACHE AND
.QPKG/QLMS/SLIMSERVER/PREFS.
AND NOW RESTART QLMS, AND YOU HAVE A CLEAN INSTALLATION.

dolodobendan wrote: 
> I just installed it, because... I can, and it replaced the 1.09e beta.
> The Cache folder was empty except for "deletecache-deleteplaylists" and
> "InstalledPlugins". So I guess .qpkg/QLMS used the same Cache as
> .qpkg/LogitechMediaServer (the "old" QLMS)  (if detected) and copying
> the plugins?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


Its a beta, so be patience.
I think i found the dns error.
Gone bring out a second beta to night 1.10.b1

But please remember, it took a lot off time, redesign it.
There was a lot to read and find out.
And developing it, in my spare free time.

So hopefully you will install the next release.
So i can get a good impression how its runs on other QNap systems.

dolodobendan wrote: 
> There was chaos between these two aforementioned installations, so I
> installed from scratch. 
> 
> It's not completely set up yet, but what I can say now is:
> 
> + It feels much much slower now: The tab settings/plugin now takes ages
> (~25s) to load.
> + My music is no longer found.
> 
> qlms.log: (I changed the 7.9.1 to 7.9.2 here and cut the repeating rest
> to save space, don't mind the timestamps here.)
> 
> > 
Code:

  >   > 
  > [00:48:10 13-10-2018] Please wait a few minuts, have to build QLMS from 
scratch !
  > [00:50:43 13-10-2018] Upgrading QLMS to 7.9.2, please wait !
  > [00:51:09 13-10-2018] Starting QLMS in the Background.
  > sudo: unable to resolve host Server: Connection refused
  > [00:51:18 13-10-2018] QLMS is started in the Background on [31759] !

  > [00:51:18 13-10-2018] Please wait a few minuts, before you try to access 
the webgui through http://(IPnr Server):9001 !
  > [00:54:21 13-10-2018] Stopping QLMS [31759] in the Background.
  > 

> > 
> 
> server.log:
> 
> > 
Code:

  >   > 
  > [18-10-13 01:04:15.9556] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1539113931, Tue Oct  9 22:20:50 CEST 2018) perl 5.024004 - 
i686-linux-thread-multi-64int
  > [18-10-13 01:04:17.5523] Slim::Utils::SQLiteHelper::postConnect (374) 
Optimizing DB because of missing or empty sqlite_stat1 table
  > [18-10-13 01:04:17.7125] Slim::Schema::forceCommit (2147) Warning: Trying 
to commit transactions before DB is initialized!
  > [18-10-13 01:04:17.9290] Slim::Utils::SQLiteHelper::postConnect (374) 
Optimizing DB because of missing or empty sqlite_stat1 table
  > [18-10-13 01:04:17.9689] Slim::Schema::forceCommit (2147) Warning: Trying 
to commit transactions before DB is initialized!
  > [18-10-13 01:04:18.8340] Slim::Utils::SQLiteHelper::postConnect (374) 
Optimizing DB because of missing or empty sqlite_stat1 table
  > [18-10-13 01:04:18.8610] Slim::Schema::forceCommit (2147) Warning: Trying 
to commit transactions before DB is initialized!
  > [18-10-13 01:04:19.1691] main::checkDataSource (1110) Warning: Schema 
updated or no media found in the database, initiating scan.
  > [18-10-13 01:04:28.6491] Slim::Utils::SQLiteHelper::postConnect (374) 
Optimizing DB because of missing or empty sqlite_stat1 table
  > [18-10-13 01:04:28.7250] Slim::Schema::forceCommit (2147) Warning: Trying 
to commit transactions before DB is initialized!
  > [18-10-13 01:04:29.2579] Slim::Networking::Repositories::__ANON__ (146) 
Failed to fetch https://repos.squeezecommunity.org/extensions.xml: Couldn't 
resolve IP address for: repos.squeezecommunity.org
  > [18-10-13 01:04:29.2583] Slim::Networking::Repositories::__ANON__ (149) 
https lookup failed - trying plain text http instead: 
http://repos.squeezecommunity.org/extensions.xml
  > [18-10-13 01:04:31.2614] Slim::Formats::XML::gotErrorViaHTTP (339) Error: 
getting http://opml.radiotime.com/Index.aspx?partnerId=16
  > Couldn't resolve IP address for: opml.radiotime.com
  > [18-10-13 01:04:31.2621] 
Slim::Plugin::InternetRadio::Plugin::_gotRadioError (67) Unable to retrieve 
radio directory from SN: Couldn't resolve IP address for: opml.radiotime.com
  > [18-10-13 01:04:33.7723] Slim::Utils::Firmware::downloadAsyncError (581) 
Warning: Firmware: Failed to download 
http://update.slimdevices.com/update/firmware/7.9.2/fab4.version (Couldn't 
resolve IP address for: update.slimdevices.com), will try again in 10 minutes.
  > [18-10-13 01:04:53.2643] Slim::Formats::XML::gotErrorViaHTTP (339) Error: 
getting http://opml.radiotime.com/Index.aspx?partnerId=16
  > 
  > And so on and so on and scooby dooby doo-by
  > 

> >



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


I did not see that like that.
Happy with all the input.
But QLMS is meant as een beta, and made to be installed beside
QLogitechMediaServer.

If all the trouble is solved, it will be release as
QLogitechMediaServer.
But i had to find out a lot.
Especially as the next step will be the release off a arm version.

Upload the latest version, with a lot off fixs.

dolodobendan wrote: 
> Woah, my comment wasn't meant to criticize you, quite the opposite! I'm
> grateful for your continuous work! :)
> 
> If you could tell me which file I have to change to rename my current
> working installation (like QLMS_stable) so that it's not overwritten by
> the latest QLMS, I'll give it a try tonight!



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


*

 QLMS version 1.10.b1 ===
13-10-2018
+ Changed some things so that now dns will work proper.
+ Redesigned error handling on startup, will try to fix common error and
restart.
I'ved it still wont start, have a good look in the log.err file!
+ If there is also QLogitechMediaServer installed, it will copy the
settings!
+ Can be installed beside QLogitechMediaServer, but this must be
disabled in
the appstore.
+ Tried to optimize it to be used on a server.
+ Tested here for some time, and works great and fast !
+ For shairtunes2 make sure the bonjour services is actieve.
* remember still a beta, and it took quit some time and effort getting
it to
this point !
* Having trouble please upload QLMS.log.err file ?
* having remark or suggestions, feel free to send them to me.

'QLMS version 1.10.b1 x86_64' (http://bit.ly/2NI0pUy)
'QLMS version 1.10.b1 x86' (http://bit.ly/2CdKP0U)

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


jasell wrote: 
> Hi,
> I can try to install it on my spare qnap. 
> Were do I find the installation package?
> 
> 
> Sent from my iPad using TapatalkSure try it. The more test it, the more input 
> I get. Try the latest
version 1.10.b1

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-13 Thread digimaster


dolodobendan wrote: 
> I, too, updated to 1.10.b1: Quite the opposite here, the plugin tab
> doesn't load at all now.
> 
> From what I can tell it might have lost compatibility with Custom
> Browse.
> 
> 25784
> 
> And LMS doesn't seem to have access to the music library any longer.
> 
> But "sudo: unable to resolve host Server: Connection refused" is gone
> now from QLMS.logWhat you could try, is remove SlimServer/Cache and the 
> SlumServer/prefs.
Will result in a clean fresh setup. But some time old lms setting start
giving conflicts. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


dolodobendan wrote: 
> I'll give it a try, thank you!
> 
> Update: No joy here, I cannot access the library via LMS (Home / My
> Music / Music Folder shows as empty.)
> 
> If the user hasn't changed, I guess I'd have to rewrite all permissions
> in the library. Problem here is, I'd have to do that every time I add
> music via Windows.
> 
> The RAID scrubbing has started on the server, slowing things down. I
> guess that's all for today then. Thank you for effort!Yes the home directory 
> is empty. To let QLMS work on all Qnap systems
with out trouble, I start chrooting it. So the directory layout you see,
is not the real directory structure of you're Qnap. And normally all the
shares are under /share. So I'm curious about what kind of model you
got. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


The normal structure on QNap, is that all the shares are under
/share/(depends on model/.
So for example, al my mediafiles, are in /share/*/Multimedia.
And the Download is under /share/*/Downloads.
The same for the directory where all the apps are installed,
/share/*/.qpkg

And because to make it more compatible, I start using chroot so LMS will
get a kind off new filesysteem.
Through this way, LMS get its need libaries and files, and wont give
errors because there are old incompatible libraries.
Because of that, one has to make sure all need file are available in a
chroot.
In QLMS i do this, by remounting the /share/*/ in the chroot.

So iḿ very curious on you file system layout.
What you could try, when running QLMS.
Open a ssh shell and do [ cd /share/*/.qpkg/QLMS/.config/LMSROOT/share
]
Now do ls -l, and there will be a home directory and another.
Try to go to the other and do a ls -l there, here should be you're
complet list off shares.

Could you send me the output from mount please?

dolodobendan wrote: 
> I'm not sure we're talking about the same thing here. Let's start with
> the model: QNAP 469L, QTS 4.3.4 (x64)
> 
> With "Home" etc. I was referring to the LMS Web GUI's entries. The
> "Music Folder" should show the location as entered under "Settings". But
> that's empty.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


Nice to hear, its working now.
But keep in mind, were still in a beta stage's
Gone need some more fine tuning, before the officieel release.

QLMS is build on a completly new way off installing and running on
QNap.
I made that choice, because older QNap systems where missing needed or
outdated libraries.

frch260246 wrote: 
> I installed  QLMS 1.10.b1 on my TS-253-PRO QTS4.2 this morning and
> everyting now works perfectly.
> Thanks very much for this great version.
> I will now proceed to upgrade to QTS4.3



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


Nice to read, you got it work.
Keep in mind, all the folders must be under /share/(depend on QNap
system)/

A easy way to test it, is by go on to a ssh shell.
Now give the following command [echo /share/*/Public].
This will always gives the public share path.
Now take of /Public, and you got the share path where all folders should
be.
Now browse through those folders to find you're music folder.
Iǘe you found it, it will be on the same place in LMS.
As i wrote on my QNap it's all under Multimedia, there i put all my
music and video files in separated folders.

That's also the path which QLMS is using to remount in chroot.
There should not folders or files be symlink outside that, for LMS to
find and uses.

Curious about how fast is working on youŕe end?

dolodobendan wrote: 
> It's working now. Again I installed from scratch, but this time I chose
> my test library as the music source. Maybe a complete rescan was
> necessary (leaves me wondering why "Music Folder" didn't work until now
> as it should be independent of any db). What I'll do now is to start a
> scan on my real library, but that'll take some time. Maybe it's to early
> for a deeper analysis of mount etc. at this point. Will keep you posted,
> thank you!



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


Oke great that is working at you ŕe end also.

I doing some fine tuning now.
But there is the question, how shall i release it.
Bring out a new QLogitechMediaServer release, or as release with the
name QLMS.

I'm still in doubt.
QLogitechMediaServer is a completly different way of installing and
running LMS then QLMS.
So i'm think, there could be people how like QLogitechMediaServer as it
is.
On the other hand, this will improve stability of LMS, and it's not
depending on any software from QNap anymore.

dolodobendan wrote: 
> Of course, I know that. :)
> 
> 
> 
> That's what I do, too.
> 
> 
> 
> Yes.
> 
> 
> 
> I am, too. Last first scan was 2:39h, the second (Custom Scan) about the
> same, I think. The WebUI is as fast as it was with 1.09e.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


QLMS is much more in control, and protected the QLogitechMediaServer.
Has all the need libary's it needs to run.
Is much better optimize to run on a server/nas system.
You will notice it, when you got another heavy job running on the QNap.
QLogitechMediaServer, will stop playing audio, QLMS on the other hand
will keep playing.
For QLMS it mutch easier to add missing prg or libaries.
No need to have anything like a kind off Optware installed for lame/wma
support
For those under us, how have a older QNap which is not supported
anymore, still can use QLMS.
( That's why i went this way, as those hat errors about missing libarys
or other errors)

But i'm still curious why you have you're music folder under home ?

dolodobendan wrote: 
> In the end, it's just a matter of taste. I think I'd keep both versions
> and use QLMS as the new name, because it's something new.
> 
> I'm not sure if I like the chroot concept, but I understand why you'd
> want to use it. Yes, I like it the way it was with 1.09e. ;)



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-14 Thread digimaster


Strange that you web GUI menu entries seem to be slow.
For me it's faster, i also notice this when using the app on my phone.
And spotty loads much faster then in version 1.09e

dolodobendan wrote: 
> If it's as fast as before, I'm sold. :)
> 
> 
> 
> I don't. :) I was referring to the LMS Web GUI's menu entries, not the
> file structure.
> 
> My music is here: /share/CACHEDEV1_DATA/Multimedia/Music

Ha ha same place where my music is stored.:D
So i've you point LMS to that place, it should also work again.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-15 Thread digimaster


dolodobendan wrote: 
> Ok, it was right there for me to see. I have to add "CACHEDEV1_DATA/" to
> the path in the playlists. That could annoy people with many playlists
> and no clue how to find & replace.It seems you never used the correct paths.
But there is a very simple solution for this.
There is a very powerful tool available in Linux. And that's sed, which
could solve this with one command. Have to have a look on the right
command options. What you could do, is start to make a backup of the
Playlist files.

Regarding you're thing on the plugin page. Only it there are many
updates avaible, it could load slow.

Gone release b2 tonight. And also give you the right command line to
solve the Playlist issue. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-15 Thread digimaster


*
 QLMS version 1.10.b2 ===
15-10-2018
+ The start script, had a wrong setting, that's why it could not always
find
slimserver.pl. ( That's fixed in this version.
+ Also optimize some thing more.
+ Add some extra library's and prg like mac (ape) and icedax (CDDA2WAV),
to
give better support to some plugin's
+ Al based on the Glibc library version 2.23
* Getting near a first officieel release candidate!

'QLMS 1.10.b2 x86 15-10-2018 release candidate' (http://bit.ly/2NKqC5b)
'QLMS 1.10.b2 x86 15-10-2018 release candidate' (http://bit.ly/2PBghdt)

Those how have a older QNap with QTS 4.1 or 4.2, please test it.
The path issue should be fixed, developed this especially for those
user, how can't upgraded to a new QTS version !
So please help me out, and let me know if it works on those systems ?

Input or remarks are welcome, and if it works please tell me also !

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-16 Thread digimaster


dolodobendan wrote: 
> No problems so far, but feels slower. Is there an option to trigger
> rescans by itself? I don't remember (and would remember, it's a
> multistep procedure here) running a scan yesterday, and yet, there was
> one. This one took 4 hours, but the server was in use at time. (Another
> reason why I wouldn't have triggered a scan.)

If you're Nasystems is very busy, sure it could feel slower.
It looks at how much resources are used, so if there is a lot running,
will be slower then normal.
In the older way, this would give in drops out in audio.
Now it more looking at what running, and tries to adjusted to it.
That way drops out are brought back to a minimal.

Ther are two plugins, which you could install regarding scanning audio
files.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-16 Thread digimaster


dolodobendan wrote: 
> I never had audio drops due to high CPU load.
> 
> I just wonder why there was a rescan. I do not want auto rescans, like
> never. (Btw. Custom Scan is for scanning additional tags and useful only
> in combination with Custom Browse.)
> 
> Apart from this unexpected rescan, everything works quite well. But I
> have to admit that I think about reinstalling 1.09e when testing is
> done. Menu interaction (like loading Custom Browse menus) was faster.That's 
> completely up to you. Regarding a rescan, not something which
done or has anything to do with QLMS. the startup is pure, nothing set
or done by QLMS, COMPLETELY the same as with QLogitechMediaServer. The
control is at the user, by editing the  QLMS.conf file. But keep in mind
in Lms hat some adjustment lately regarding database.

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


dolodobendan wrote: 
> Yes, the database upgrade reduced scanning time down to 2:45h, that's
> why I'm a bit puzzled here. Also, while the overall scanning time was
> reduced, building the fulltext index was up to 45min (it was around 3min
> before). With 1.10.x I see overall scanning time way up and fulltext
> index building down to 3min, as if there never was a db upgrade.
> 
> This calls for more beta testing, keep 'em coming. :)A thing what you could 
> try, is go to the QLMS directory, and remove the
file .IONICE. Then restart QLMS, and try if it's faster for you. As I
wrote at my end, lms is much faster then before. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


dolodobendan wrote: 
> Thank you for confirming my suspicion that the latest QLMS is using the
> old db driver.
> 
> @digimaster: Is this intentional?The latest QLMS  New installation out of the 
> box installs the latest
officieel release 7.9.1. But one can edit the QLMS.conf file to get the
latest nightly betas. So if one wants the nightly, beta release they
have to edit the line #NIGHTLY=0 to NIGHTLY=1. And restart QLMS, to get
the latest nightly release. But also must be aware, that on every
restart it will check if a new nightly is avaible. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


dolodobendan wrote: 
> Removing .IONICE didn't speed up things on my end. Is it possible that
> 1.10.x still uses the older db for some reason?Did you active nightly in the 
> config file? 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


dolodobendan wrote: 
> Removing .IONICE didn't speed up things on my end. Is it possible that
> 1.10.x still uses the older db for some reason?As I wrote a time ago, out of 
> the box nightly is disable, due to the
issue with flac and glibc version errors on older Qnap running QTS 4.2
or lower. Which now should be fixed with the new way of installing and
running lms in chroot. Now it not depending on any software delivered
Qnap.

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


mherger wrote: 
> >Perl Version: 5.24.4 - i686-linux-thread-multi-64int
> >Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
> > 
> > Does it come with its own dbd thus overwriting possible updates in
> LMS'
> > build?
> 
> Oh, LMS doesn't have binaries for that platform yet.
> 
> -- 
> 
> MichaelCould you tell me more. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster


dolodobendan wrote: 
> Ok, now we know why my LMS is slower with the latest version. Thank you!
> 
> Going back to the older, newer version for now.
> 
> @digimaster: If you could arrange for new builds to have a name like
> QLMS2 so that I can keep my working QLMS besides new builds for testing,
> that would be great (or tell my how to modify the 1.09e installer to
> appear under a different name.) I could keep my working version and keep
> on testing your new builds. Win-win? Of course, only if that's feasible
> for you.QLMS version 1.09.e uses the same perl version. So there is not the
difference. The only thing which is different. It that uses libraries
and software from Qnap. And in 1.09e x86_64 have a real x86_64 perl
version. The 1.10  up until uses a i*86 perl. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-17 Thread digimaster

mherger wrote: 
> > and software from Qnap. And in 1.09e x86_64 have a real x86_64 perl
> > version. The 1.10  up until uses a i*86 perl.
> 
> LMS comes with new binaries for x86_64, but not i*86.
> 
> -- 
> 
> MichaelOké so if I understand correctly, the x86_64 has newer binaries like
MySQL. The i*86 does not. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-18 Thread digimaster


Wauw Michael, what a great news and support.
I think you have made a lot off people very happy.
And that's includes me.

Me for myself, not looking that much in the included binaries.
But as you have noticed, there are people keeping a close eye on it.

At the moment working on the x86_64 version. ( Almost finched )
And then gone have a go on the arm support.

So thanks a lot for the great work.
Nice to see we can get LMS back on the QNap nassystems again.



mherger wrote: 
> >> Ok, I added updated modules for your platform:
> >>
> https://github.com/Logitech/slimserver/commit/c363fd70f5e902d8ebd1e189e8707af3bf6f46e2
> >>
> >> Please give them a try!
> > 
> > And so I did.
> 
> Thanks!
> 
> > Scanning time was now 03:08:07, building full text index
> > 01:00:56. The overall scanning time is +30m compared to the fastest
> > recent scan. Could be the updated Audio::Scan: 1.02. But as I said, I
> > don't care that much about scanning times.
> 
> As mentioned before there seems to be a "problem" slowing things down 
> considerably on the very first scan. But upon subsequent scans the 
> results are better.
> 
> -- 
> 
> Michael



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-19 Thread digimaster


SMC wrote: 
> I have now installed QLMS 1.10.b2 x86-64 on a TS-251 Firmware 4.3.4.0569
> Installed over 1.10.b1, no QLogitechMediaServer install present.
> 
> It is working fine, thank you. 10,000 file full scan took about twice as
> long as 1.10.b1 at 484 seconds. The LMS webGUI is very fast and
> responsive. Shairtunes plugin working, Radio Paradise working, BBC
> iPlayer working so I'm very happy, thank you!
> As an added bonus it has nudged me to begin to learn linux in order to
> locate, edit and save the .QLMS.conf file to enable nightly updates. It
> took me a while to figure out it was hidden and how to reveal it!Nice to 
> read, it's working at you're end. The. QLMS.conf file is located
inside the QLMS directory. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-21 Thread digimaster


*
 QLMS version 1.10.b3 ===
21-10-2018
+ Now in the x86_64 release, add the x86_64 perl and libraries.
Tested and works great.
+ It seems that the binaries included in LMS for the i*86, where not
updated
to the latest. Michael has updated them now
( from nightly version , Logitech Media Server Versie: 7.9.2 -
1539853772 @ Thu Oct 18 11:50:51 CEST 2018 )
so both x86_64 and i*86 LMS have the same versions. ( Thanks
dolodobendan and Michael Herger )
( many thanks to Michael for has great work and support )
+ Both version are now tested on different QNap systems with different
version of QTS ( 4.1, 4.2, 4.3 ). And all are running great. ( thanks
dolodobendan, gerardluc, smc and more )
+ MusicIP runs on both versions !

! IMPORTANT if QLogitechMediaServer is installed, settings will be
copied and path's adjusted.
This can make the installation take longer, so give it some time .
Also after this, the first two or three times, the plugun page will
load slow !

! IMPORTANT If you have a QLMS copie installed, please remove it first
through the APP-centre.

* Gone do more some fine tuning, before doing the official release.
* So if there some thing wrong, let me know please ?
* And also would be nice, the hear when it works on you're Qnap
nassystem.
* Please include which model, and QTS version and archs you're using. 

'QLMS beta version 1.10.b3 the x86_64 release candidate !'
(http://bit.ly/2q3k340) ;)
'QLMS beta version 1.10.b3 the x*86 release candidate !'
(http://bit.ly/2q3k340)
*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-21 Thread digimaster


Thanks for the information.
Nice that it works at you're end.
Regarding the time, has nothing to do with QLMS.
Something which has to do something with in LMS it self.


SMC wrote: 
> I removed 1.10.b2 and installed 1.10.b3, seems to be working fine here
> in 4.3.4.0569 on a TS-251. 
> 
> Logitech Media Server Version: 7.9.2 - 1539967036 @ Fri Oct 19 19:20:19
> CEST 2018
> OS: Linux - EN - utf8
> Platform: x86_64-linux
> Perl Version: 5.24.4 - x86_64-linux-thread-multi
> Audio::Scan: 0.95
> IO::Socket::SSL: 2.049
> Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)
> 
> As a potential bug report I noticed yesterday with 1.10.b2 that the
> clock display on my Booms is one hour fast. It is still one hour fast
> with 1.10.b3, the QLMS package seems to be taking system time from my
> NAS and adding an hour. Something to do with time zone or daylight
> saving time? I don't see any relevant settings in .qpkg.CONF that I can
> change to fix this.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-21 Thread digimaster


Nice it works at youŕe end.
And yes the is a difference in i686 and x86_64.
Started this beta where both had i686, because i686 also runs on a
x86_64, but not the other ways around.
Regarding the used version, thats some thing from LMS it self.

The x86_64 version uses around 100MB more memory.

Thanks for testing.

dolodobendan wrote: 
> Custom Scan is running as we speak, so no comments on menu speed just
> yet.
> 
> > 
Code:

  >   > 
  > Logitech Media Server Version: 7.9.2 - 1539967036 @ Fri Oct 19 19:20:19 
CEST 2018
  > Hostname: myhost
  > Server IP Address: myip
  > Operating system: Linux - EN - utf8
  > PLATFORM ARCHITECTURE: X86_64-LINUX
  > PERL VERSION: 5.24.4 - X86_64-LINUX-THREAD-MULTI
  > AUDIO::SCAN: 0.95
  > IO::Socket::SSL: 2.049
  > Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)
  > Total Players Recognized: 4
  > 
  > The server has finished scanning your media library.
  > Total Time: 02:38:57 (Sunday, 21. October 2018 / 22:17)
  > 

> > 
> 
> Now I'm back(?) at *x86_64-linux* (it was: Platform Architecture:
> *i686-linux* / Perl Version: 5.24.4 -
> *i686-linux-thread-multi-64int*), as it seems. Did I install the wrong
> version? Both sound 64bit'ish. Also, the Audio::Scan module did not
> update, maybe related.
> 
> Scanning now is significantly faster again (because of x86_64?)



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-22 Thread digimaster


dolodobendan wrote: 
> Happy to help. Then I think installed the "wrong" version the last time.
> Good to know, thanks.
> 
> Leaves the question what happened to Audio::Scan 1.02 here.That's part of the 
> Lms packet. So some thing which comes from the
download of lms itself. You should ask that on Michael. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-22 Thread digimaster


mherger wrote: 
> > Leaves the question what happened to Audio::Scan 1.02 here.
> 
> We recently added Ogg/Opus support to LMS, which requires A::S 1.02. As 
> I was building for i686 anyway, I did this for that platform. But I 
> haven't updated many more yet.
> 
> -- 
> 
> MichaelI do understand how many work it takes.

Once again thanksfor all the great work, so that we users still have so
fun of the LogitehMediaServer. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-23 Thread digimaster


dolodobendan wrote: 
> Maybe I should add that I don't use "AutoRescan" or "Rescan Music
> Library". I'll have another look at qlms.conf, though, maybe there's
> something new in it.Nope nothing regarding anything on that. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-23 Thread digimaster


dolodobendan wrote: 
> I kind of hoped for a simple explanation here. Thank you!Are you using 
> Musicip or spice fly? Is so that could the one. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-26 Thread digimaster


*

Out now ;)

Version 2.00.00

= QlogitechMediaServer version 2.00
= 23-10-2018
+ After a lot of looking, reading, testing and find out !
( And took a lot of work, to find out, and programming !)
+ Proud to release a completely new version of QLogitechMediaSever.
+ It's a totally new layout and way of running the services on a QNap
nas-system.
+ Due to the errors and trouble, on many older QNap model, which could
not upgraded tot QTS 4.3.
+ From this version using to chroot command, to make sure the needed
libraries and program's are available.
+ The basic is the same, but the approached is changed, and some new
stuff is added.
+ Its still has support for MusicIP, Spotty, YouTube, Radio Paradise,
SqueezeSonic and now also Shairtunes2 a.m. ( For shairtunes2 bonjour
must be actieve )
+ Through this way could add libraries support for wma, icedax
(CDDA2WAV) and many more. ( to make several plugin work )
+ Has been tested a several different QNap systems running QTS 4.1, 4.2,
4.3 and even 4.0 with x*86 and x86_64 arch
+ The only program which has to be available on you're QNap is chroot.
! Please keep in mind, i only deliver the basic layout. The LMS software
is always download from the official website.
So any remarks regarding the functions of LMS, should be done in the
slimserver forum.

+ Trouble on startup, please leave a messages in the QNap/SlimServer
forum, included the log and log.err files.
( OLMS is the beta program of QLogitechMediaServer, can only be found
on the several forum !)

!! Important in this version, many things are changed. If you can't find
you're music files, have a good look in /share/(depends on you're QNap
layout)/.
Mostly can be found in /share/*/multimedia or /share/*/homes 


URL="https://www.qnapclub.eu/en/howto/1"]How to add Qnapclud store to
the QNap App center[/URL]

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)


For those who send me a donations, thank you, gives me a feeling that
all the work is appreciated.
*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-26 Thread digimaster


The error on pid, is not that important.
About the plugin pages, at first quiet normal.
But tells you are using settings off different older LMS.
Keep in mind that in several files in Cache and the prefs directory,
there are files with information regarding used paths.
It will fixs itself the longer you are using it.

SMC wrote: 
> I've uninstalled QLMS beta 3 and installed V2.0
> I notice that the restart triggered by selecting new plugins takes much
> longer - over an hour last restart.
> Seems there is a permission problem with writing slimserver.pl, is this
> the cause?
> 
> [18-10-26 10:39:41.0548] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-26 10:39:41.0730] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-26 10:39:46.4102] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:46.6171] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:39:47.8405] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:47.9364] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:39:48.5669] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-10-26 10:39:57.9030] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:57.9927] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:43:10.1139] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:43:10.2097] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:44:47.0061] Slim::Utils::PluginDownloader::_downloadError
> (217) unable to download BBCiPlayerExtra from
> http://downloads.sourceforge.net/project/bpaplugins/OtherPlugins/BBCiPlayerExtra-v107.ZIP
> - 404 Not Found
> [18-10-27 00:30:54.1083] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 00:30:54.1146] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 01:03:09.9579] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 01:03:09.9846] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 01:03:22.2818] Slim::Plugin::MusicMagic::Plugin::initPlugin
> (155) Can't connect to port 10002 - MusicIP disabled.
> [18-10-27 01:03:22.6203] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-10-27 01:03:23.3273] Plugins::ShairTunes2W::Plugin::publishPlayer
> (458) start avahi-publish-service "Spare Boom"
> [18-10-27 01:03:23.3340] Plugins::ShairTunes2W::Plugin::addPlayer (372)
> create client Slim::Player::Boom=ARRAY(0x971f040) with proc
> Proc::Background=HASH(0x976b988)
> [18-10-27 04:29:27.9047]
> Plugins::ShairTunes2W::Plugin::revoke_publishPlayers (434) Stop old
> publish players services:26821
> [18-10-27 04:29:27.9062] Plugins::ShairTunes2W::Plugin::stop_mDNS (330)
> Killing all processes /usr/bin/avahi-publish-service
> [18-10-27 04:29:30.2240] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 04:29:30.2303] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 05:40:52.2026] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 05:40:52.2294] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logite

Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


Through the input from you, and some other user.
Had a look, if there is away to make those symlink in /share, to be part
of the chroot.
I found a way i think, so gone bringout a bugfixs release.
It will also fixs the pid error.

SMC wrote: 
> I've uninstalled QLMS beta 3 and installed V2.0
> I notice that the restart triggered by selecting new plugins takes much
> longer - over an hour last restart.
> Seems there is a permission problem with writing slimserver.pl, is this
> the cause?
> 
> [18-10-26 10:39:41.0548] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-26 10:39:41.0730] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-26 10:39:46.4102] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:46.6171] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:39:47.8405] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:47.9364] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:39:48.5669] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-10-26 10:39:57.9030] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:39:57.9927] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:43:10.1139] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-26 10:43:10.2097] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-26 10:44:47.0061] Slim::Utils::PluginDownloader::_downloadError
> (217) unable to download BBCiPlayerExtra from
> http://downloads.sourceforge.net/project/bpaplugins/OtherPlugins/BBCiPlayerExtra-v107.ZIP
> - 404 Not Found
> [18-10-27 00:30:54.1083] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 00:30:54.1146] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 01:03:09.9579] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 01:03:09.9846] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 01:03:22.2818] Slim::Plugin::MusicMagic::Plugin::initPlugin
> (155) Can't connect to port 10002 - MusicIP disabled.
> [18-10-27 01:03:22.6203] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-10-27 01:03:23.3273] Plugins::ShairTunes2W::Plugin::publishPlayer
> (458) start avahi-publish-service "Spare Boom"
> [18-10-27 01:03:23.3340] Plugins::ShairTunes2W::Plugin::addPlayer (372)
> create client Slim::Player::Boom=ARRAY(0x971f040) with proc
> Proc::Background=HASH(0x976b988)
> [18-10-27 04:29:27.9047]
> Plugins::ShairTunes2W::Plugin::revoke_publishPlayers (434) Stop old
> publish players services:26821
> [18-10-27 04:29:27.9062] Plugins::ShairTunes2W::Plugin::stop_mDNS (330)
> Killing all processes /usr/bin/avahi-publish-service
> [18-10-27 04:29:30.2240] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 04:29:30.2303] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.
> [18-10-27 05:40:52.2026] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 05:40:52.2294] Carp::croak (167) Warning: write_file
> '/var/run/QLogitechMediaServer.pid' - sysopen: Permission denied at
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl
> line 1197.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


*'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

= QlogitechMediaServer version 2.00.01
= 27-10-2018
* Some user could not find there music files after upgrading to 2.00
That's because they are symlink's in /share, and chroot can resolve
symlink
outside it's chroot environment.
This release will solve this issue !
* Some times a restart from the plugin pages, did not restart LMS again
!
Should be fixed !.
* On some Qnap systems there was a writing error on the pid file.
Is fixed in this release
* Small change on the startup of LMS, sudo will start a daemon.
+ Now also external HD connected to the Qnap nassystem, can be
found/used in LMS !

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Developing was quiet a challenge to do, and took quiet a lot of times
and investigation, trying and testing.  Also had to go very deep, in the
way Qnap works and the layout of their software and filesysteem, and how
linux operates. But i think have kicked it, and release a very nice way
to let LMS running without any trouble's or errors. ( most of the old
errors and trouble came from older or missing software in the QTS )

Still having issue's or trouble, please be very clear and try to give as
many info as possible !.
Keep in mind i only own a ts-453a to work with ! (

NEXT UP WILL BE SUPPORT FOR ARM !. ( But gone take a bit  more time,
need to learn linux for arm)*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


Should be fixed.
Please let me know ?

SMC wrote: 
> Thanks very much for looking at this, I'll let you know how the bugfix
> version runs once you've had a chance to release it.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


SMC wrote: 
> Wow, that was fast work! I reverted to 10.1.b3 which fixed the delay
> restarting after changing plugins.
> I have uninstalled that, and installed 2.00.01 and I am pleased to
> report the slow restart issue has gone, thank you very much!
> Here is the log below (TS-251, FW 4.3.4.0569).
> 
> [18-10-27 16:30:46.2271] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 16:30:47.9989] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-27 16:30:48.1055] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-27 16:30:48.8790] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-27 16:30:48.9771] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-27 16:30:49.2481] main::checkDataSource (1110) Warning: Schema
> updated or no media found in the database, initiating scan.
> [18-10-27 16:30:51.7754] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-27 16:30:51.8714] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-27 16:36:45.2409] Slim::Utils::SQLiteHelper::postConnect (374)
> Optimizing DB because of missing or empty sqlite_stat1 table
> [18-10-27 16:36:45.3588] Slim::Schema::forceCommit (2147) Warning:
> Trying to commit transactions before DB is initialized!
> [18-10-27 16:45:02.5630] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 16:45:33.0396] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 16:50:35.8939] main::init (387) Starting Logitech Media Server
> (v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 -
> x86_64-linux-thread-multi
> [18-10-27 16:50:41.7518] Slim::Plugin::MusicMagic::Plugin::initPlugin
> (155) Can't connect to port 10002 - MusicIP disabled.
> [18-10-27 16:50:43.2219] Plugins::ShairTunes2W::Plugin::publishPlayer
> (458) start avahi-publish-service "Spare Boom"
> [18-10-27 16:50:43.2277] Plugins::ShairTunes2W::Plugin::addPlayer (372)
> create client Slim::Player::Boom=ARRAY(0xa32f350) with proc
> Proc::Background=HASH(0xa1b77c0)Nice te hear it works. Regarding the slow 
> plugin pages. Has nothing to
do with the release. If you copied the cache and prefs directory from
another installation,the trouble is the path. For example if you use it
from the beta QLMS in QLogitechMediaServer, the path is different which
at first makes the plugin pages slow.  Best is to completely reinstall
the plugins. Or use sed to fix it, like is done in QLMS. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


dolodobendan wrote: 
> There is still the problem with a second scan.
> 
> I got this message here right after the rescan:
> 
> > 
Code:

  >   > 
  > The server has finished scanning your media library.
  > Total Time: 02:39:06 (Saturday, 27 October 2018 / 01:44)
  > 

> > 
> 
> And now I look again and it's:
> 
> > 
Code:

  >   > 
  > The server has finished scanning your media library.
  > Total Time: 02:50:01 (Saturday, 27 October 2018 / 20:02)
  > 

> > 
> 
> This is new. Any suggestions what's best to log to find out what's
> going on here?I'm afraid this is something you have to ask Michael. The
QLogitehMediaServer does nothing on settings others then found in the
.QLMS.conf. Those when set are given to Lms. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-27 Thread digimaster


SMC wrote: 
> That makes sense - I suspect I hadn't uninstalled the beta when I first
> tried version 2.0. Thanks for the explanationNo problem, but keep in mind 
> QLMS will always be the beta. That's why
you can install it aside, and on installation copies if exist the Cache
and prefs directory and adjust the path. That's why some times the
installation time for QLMS can be a bit longer. Advanced you can always
run QLMS beside QLogitechMediaServer. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


earthbased wrote: 
> I am on 1.09e which has been running well.   To upgrade to v2 do I have
> to uninstall 1.09e?  Thanks!No you can do a upgraded. No need to first 
> Uninstall it, installation
will take care of everything. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


dolodobendan wrote: 
> I'll check whether it has something to do with the new LMS builds. I
> always use exactly the same settings (checklist), so if it's an LMS
> feature introduced lately, it should happen with older QLMS versions,
> too.Maybe due to the MySQL upgraded, or a left behind from a older
something. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


You dont need to uninstall the older version.
But i think you're trying to install the x86 version, but you should
install the x86_64 version.
You could check it bij logon through ssh shell, and then do uname -m
where it will properly says x86_64

jasell wrote: 
> Hi,
> 
> I had QLMS 1.08 (I think) and in my Appcenter I had an update.
> 
> I tried it and the system stated to upgrade to QLogitechMediaCenter
> 2.00.01
> 
> During the installation I got the following error
> 
> > 
Code:

  >   > 
  > TypeDateTimeUsers   Source IP   Computer name   Content 
  > Error   2018/10/28  14:38:31System  127.0.0.1   
localhost   You're trying to install the wrong version for 
LogitechMediaServer, it needs the x86_64 version!
  > 

> > 
> 
> My system is a TS 439 pro II+, on latest QTS 4.2.6 (running Intel x86
> 64 bit processors)
> 
> SHould manually remove my previous installtion QLMS installation?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


*

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Version 2.00.02 28-10-2018
= QlogitechMediaServer version 2.00.02
=28-10-2018
* bugfixs release, now al the found mounting points under /share will be
found in LMS. ( thanks to Don ) :-)

( Curious about the speed on the several Qnap systems ? )
( My LMS is faster then it ever was before ! )

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


That's strange should choice the right version itself.
I think this should be reported!.

You could download is you're self and then install it.
Don't know if that works .

jasell wrote: 
> Uname -m gives x86_64
> 
> How can I chose which version to install?
> In qnap club appcenter there is only one version , seem to be one
> installer for all...
> 
> 
> 
> Sent from my iPad using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


jasell wrote: 
> Ps. Do I need to manually install cheroot? If so, where do I found it?
> 
> 
> Sent from my iPad using TapatalkChroot should be on you're Qnap. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster

jasell wrote: 
> On my system that I upgraded from QLMS 1.08 I can’t acces the the page
> settings/plugins I just get waiting...
> 
> When doing a manually stop/start from command prompt
> (./QLogitechMediaServer.sh start) I get an error msg:
> /.QLMS.func: line 157: [: too many arguments
> 
> But it starts anyway...
> 
> Do I need to clear something in order to access plugins page?
> 
> 
> 
> Sent from my iPad using TapatalkPlugin pages some is slow in the beginning. 
> That because you uses cache
and prefs, which in the past where used in another installation.
Regarding error not that big a problem. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


The pluging pade will solve itself in a few days.
Its because of several things like path and updates.
Leave it some times, and tomorrow restart QLogitechMediaServer.
You will notice, thats it getting faster.

jasell wrote: 
> After upgrading to QLMS 2.00.02 I get these feedback after a manual
> start:
> > 
Code:

  >   > 
  > [admin@QNAP2 LogitechMediaServer]$ ./QLogitechMediaServer.sh start
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 165: [: 
too many arguments
  > /share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 169: [: 
too many arguments
  > QLogitechMediaServer is started in the Background on [10880] !
  > Please wait a few minuts, before you try to access the webgui through 
http://192.168.6.3:9001 !
  > [admin@QNAP2 LogitechMediaServer]$
  > 

> > 
> 
> Again, it starts so I guess minor errros...
> 
> But I still have problem with Settings/Plugins page.
> All other pages in Settings load really fast.
> I have now been waiting for several minutes for the page to load, are
> my old Prefs & Cache migrated to a new platfrom/installation?
> 
> My log file (Logs/server.log) seems a bit strange, is there a problem
> with a character set??
> > 
Code:

  >   > 
  > [18-10-28 17:23:52.1260] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1539967036, Fri Oct 19 19:20:19 CEST 2018) perl 5.024004 - 
x86_64-linux-thread-multi
  > [18-10-28 17:23:58.7278] Slim::Utils::PluginManager::load (393) Warning: 
Couldn't call Slim::Plugin::Sounds::Plugin->initPlugin: Can't use string ("
  > 1234
  > opml
  > type"...) as a HASH ref while "strict refs" in use at 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/Sounds/Plugin.pm
 line 63.
  > [18-10-28 17:23:59.0456] Slim::Control::Request::execute (1888) Error: 
While trying to run function coderef 
[Slim::Plugin::Extensions::Plugin::appsQuery]: [Can't use string ("
  > 1234 
  > HTTP::Headers"...) as a HASH ref while "strict refs" in use at 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/SimpleAsyncHTTP.pm
 line 123.
  > ]
  > [18-10-28 17:23:59.9145] Plugins::ExecuteScript::Plugin::doThisScript (219) 
Execute: No Script Selected
  > [18-10-28 17:24:00.0972] Plugins::ExecuteScript::Plugin::doThisScript (219) 
Execute: No Script Selected
  > [18-10-28 17:24:00.1774] Plugins::ExecuteScript::Plugin::doThisScript (219) 
Execute: No Script Selected
  > [18-10-28 17:24:00.1810] Plugins::ExecuteScript::Plugin::doThisScript (219) 
Execute: No Script Selected
  > [18-10-28 17:26:06.0409] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling Slim::Web::HTTP::processHTTP: Can't use 
string ("
  > 1234 
  > HTTP::Headers"...) as a HASH ref while "strict refs" in use at 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/SimpleAsyncHTTP.pm
 line 123.
  > ; fh=Slim::Web::HTTP::ClientConn=GLOB(0xa196d40)
  > [18-10-28 17:27:21.0260] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling Slim::Web::HTTP::processHTTP: Can't use 
string ("
  > 1234 
  > HTTP::Headers"...) as a HASH ref while "strict refs" in use at 
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/SimpleAsyncHTTP.pm
 line 123.
  > ; fh=Slim::Web::HTTP::ClientConn=GLOB(0xa19a1b0)
  > [18-10-28 17:28:36.0282] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling Slim::Web::HTTP::processHTTP: Can't use 
string ("
  > 1234 
  > 

> >



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-28 Thread digimaster


*

There are people who complain, that after the upgraded the plugin
webpage is slow or not loading !
This is because of several things, al regarding that all of them come
from another installation like SSOTS or others.
They copied the Cache en prefs directory, in the SlimServer directory
from QLogitechMediaServer.
On itzelf not a big a problem, but in those file there are also path
settings.
And because Cache and prefs now are located in another directory
structure, is take some time to adjust.
That's quiet normal and will solve itzself.
So if you have this issue, leave it be, and try restarting
QLogitechMediaServer once a day.
You will notice that's it getting faster and the issue will solve it
self.

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-30 Thread digimaster


jasell wrote: 
> Thanks, it did work this morning. 24h self-healing system, wow!
> 
> Operation is much faster, you are amazing!
> 
> 
> Sent from my iPhone using TapatalkNice to read, and as I wrote give it some 
> time. Nice that you also find
it faster. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-10-30 Thread digimaster


In the normal way, you're external drives can also be seen in LMS.
So don't see the need, to do something extra on that.
Any program running on a Qnap, can go to the external drive.

frch260246 wrote: 
> Well I suppose it is not easy to please everybody but I would prefer
> that my external disc is not mounted by QLMS. It is used for backup so
> it should not be accessed by apps. I can of course unmount it from QLMS
> after it has been started but it would be nice to be able to configure
> which folders should be visible in QLMS.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-02 Thread digimaster


earthbased wrote: 
> I tried to update to V2 by going to EU Club in the Store App but the
> QLMS did not indicate an available update.  
> 
> 
> Sent from my iPhone using TapatalkQLMS is the beta program.
QLogitechMediaServer is the official release, that's the one you need to
uses. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-02 Thread digimaster


earthbased wrote: 
> Please disregard.  Read back a bit to to see its a complete new install
> and copies settings over from QLMS BETA.QLogitehMediaServer is the official 
> release. QLMS is the beta project,
which always can be installed beside QLogitechMediaServer, purely for
testing purposes. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-02 Thread digimaster


earthbased wrote: 
> I have QLogitechMediaServer 1.09a installed.  When I select its icon, a
> new window opens and displays QLogitechMediaServer Version 2.00.02 and
> if I try to install Version 2.00.02 from EU Club App Store it already
> thinks its installed.   So should I uninstall QLogitechMediaServer 1.09a
> via EU Club MyApps icon first?You could Uninstall it, and then reinstall it. 
> But keep mind in mind,
then you got a complet new installation, al you're settings are gone. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-03 Thread digimaster

Oke what you could then, is logon by ssh shell.
Backup the Cache and prefs directory form teh SlimServer directory to a
plce outside the LogitechMediaServer directory.
Then uninstall and install it again from the app center.
And then place both directory back in the SlimServer directory.
restart QLogitechMediaServer, and you're old setting are back.

earthbased wrote: 
> Well, I don’t want to lose my settings.   Why is my BETA v1 being
> recognized as v2?   Is there a work around to install v2 without u
> installing v1?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-03 Thread digimaster


*

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Version 2.01.00 03-11-2018 
= QlogitechMediaServer version 2.01.00
= 03-11-2018
+ Add support for arm-x41 Qnap nassystems ;)
* Minor adjust on detecing if services is running.
* Adjust file-system settings for x86_64
* Small adjustment on optimization when running on nas.

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-11-04 Thread digimaster


You can do this by the following.
Logon to you're Qnap by ssh shell.
Then you can copy and paste the following .
[ cd /share/*/.qpkg/LogitechMediaServer ]
[ rm -R .config/LMSROOT/etc/localtime ]
[ ./QLogitechMediaServer restart ]
And when its running again, close the ssh shell screen.

Now it should be solved.

SMC wrote: 
> I've been looking for a way to solve this for a while as I use one of my
> Booms as an alarm clock. I've found localtime@ in /LMSROOT/etc - is this
> the file to delete?
> 
> addendum: I tried it and seems it was. Thanks very much for this,
> oneshot!



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-11-04 Thread digimaster


**

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Version 2.01.00 03-11-2018 
= QlogitechMediaServer version 2.01.00
= 03-11-2018
+ Add support for arm-x41 Qnap nassystems ;)
* Minor adjust on detecing if services is running.
* Adjust file-system settings for x86_64
* Small adjustment on optimization when running on nas.

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

**



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-05 Thread digimaster


Oke so if i understand correctly, without avahi-daemon it would work
with spotty.
Thats something which could be done, if one does not want to use
shairtunes2.
If i understands correctly, the dbus connection is only used to connect
to avahi-daemon in LMS?

mherger wrote: 
> > There is a feature that the LMS players can be announced on the local
> > network for everyone with Spotify, without the need of switching
> > acounts.
> > That feature do only work on a few platforms, @mherger explained the
> > limitation a while back, something about a service being available to
> > announce the players.
> 
> The problem is mostly spotty conflicting with avahi (if it is running) 
> this has nothing to do with QLMS.
> 
> 
> -- 
> 
> Michael



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-05 Thread digimaster


yeomanspc wrote: 
> I am running QNAP TS 670Pro (i7) with QTS 4.3.4.0695
> An early convert to QLogitechMediaServer here, I am still running 1.09a
> and it is showing that as installed on QNAPCLUB.  No upgrade option.  If
> I click on the icon, it says the version available is V2.0.10
> (2018-11-05).
> I am also running Optware (we needed to install this (on your advice) to
> make QLogitechMediaServer operate).  I understand this is not needed
> now.
> Should I..
> >   >   > 
  - Remove Optware
  - Download QLogitechMediaServer V2 and manually install?
  > > > 
> I presume it will upgrade ok and I do not need to remove V.109a?
> Will everything else continue to work as was (plug-ins, preferences
> etc.)It that case, would backup the Cache and prefs directory in the
SlimServer directory to a save place. Then Uninstall
QLogitechMediaServer and install the latest from the app center. Then
stop Qlogitechmediaserver and copy back the Cache and prefs to the
SlimServer directory. Now start Qnap-LogitechMediaServer again, and all
should work. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-06 Thread digimaster


Oke then we could try, to disable de dbus which makes the connection to
avahi.
Then spotty wont see the avahi, and anyone should be able to connected
with spotify on the wifi.
If i understand what you're telling us.
And thats something which i can build in QLogitechMediaServer.

mherger wrote: 
> > Oke so if i understand correctly, without avahi-daemon it would work
> > with spotty.
> 
> Spotty unfortunately might crash if avahi was running. Doesnt' mean it 
> cannot be used: it would turn off local discovery. Spotty under those 
> circumstances is only visible to Spotify clients logged in with the same
> 
> user account as the spotty helper.
> 
> -- 
> 
> Michael



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-07 Thread digimaster


Don't know what you mean.

Included in the installation is, 
Perl 5.24.4 with original cpan modules included( from version 1.09.a)
( For better support of several functions in LMS )

>From version 1.09 up until now Perl version 5.24.4 is included.

dolodobendan wrote: 
> I upgraded to the latest nightly and expected Perl 5.28 to be used
> because of this 'commit'
> (https://github.com/Logitech/slimserver/commit/913e9d36f0c84b4f9090830a8e016c670cc9f593).
> It's not:
> 
> > 
Code:

  >   > 
  > Logitech Media Server Version: 7.9.2 - 1541570037 @ Wed Nov 7 07:21:08 CET 
2018
  > Hostname: myhost
  > Server IP Address: myip
  > Server HTTP Port Number: 9001
  > Operating system: Linux - EN - en_US.UTF-8
  > PLATFORM ARCHITECTURE: X86_64-LINUX
  > PERL VERSION: 5.24.4 - X86_64-LINUX-THREAD-MULTI
  > Audio::Scan: 0.95
  > IO::Socket::SSL: 2.049
  > Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)
  > 

> > 
> 
> Is this a QLMS thing (bringing its own Perl) or is it something
> different?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-07 Thread digimaster


Regarding MUSIP, you should edit .QLMS.conf for that.
And then the line #MUSICIP=0 should become MUSICIP=1. and be sure that
you remove the # at front of the line.
Another way could be, to do [ touch .MUSICIP ] inside the
./qpkg/QLOgitechMediaServer  directory.
Then when you are inside the qpkg/QLogitechMediaServer directory [
./QLogitechMediaServer.sh restart ] and look at the messages.
Then running you then could do [ ./QLogitechMediaServer.sh status ] ,
and now it should tell you thats it running.
Regarding the other stuff, thats more something from LMS itself, so have
a look here in the forum regarding this.

yeomanspc wrote: 
> OK.  I have 2 servers.  TS569 pro running 4.3.4 (Backup), and a TS
> 670Pro running QTS 4.3.5.  I removed Optware and QLMS 1.09a, rebooted,
> and reinstalled just QLMS2.0.10 (no Optware).  2 significant problems.
> 1.  The servers are in constant fight for the players.  By that I mean
> that the players connect to server A, but then immediately say they are
> connecting to server B (but they do not).  This is happening every few
> seconds.  I am having to stop one server to prevent this conflict.  TBH,
> I did see this behaviour with 1.09a and gave up trying to fix it.  If I
> stop either one of the servers, the other works fine.  I wonder if this
> is a network problem, so unless someone has seen it before, I will
> continue to investigate.
> 
> 2.  I cannot get MUSICIP s to start on either machine.  MUSICIP plugin
> is installed and activated.  I checked QLMS.conf and MUSICIP was set to
> 0, so I set it to 1.  Restarted.  Mo Musicip.  No reference to MUSICIP
> in the QLogitecMediaServer.log.  If you recall, I never had an issue
> with MIP before (early tester).  Maybe I forgot to do something?
> 
> Thanks for any help - your hard work is much appreciated.



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-07 Thread digimaster

yeomanspc wrote: 
> Oops.  I can’t believe I did not see the # at the start of every
> line[emoji15].  Musicip working now.  Just need to sort the other issue
> (which I know is not QLMS).
> Many thanks.  How do we make a €€donation?
> 
> 
> Sent from my iPhone using TapatalkNice it's working for you.
Tried the thing with disabling avahi, but then Spotify connect is not
working at all. If you want to do a donation, look at the webpage of the
Qnap app store from QLogitechMediaServer, there is a button. Regarding
the other thing with the player, login to my squeezebox website and
check there. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-08 Thread digimaster


Yesterday evening did some testing with spotty.

Used a spotify account, and set it up in LMS.
Then took another spotify, which was not in LMS.
With that one could connected to LMS spotty and play songs.
There was no trouble using it, without adding the account.



yeomanspc wrote: 
> Oops.  I can’t believe I did not see the # at the start of every
> line[emoji15].  Musicip working now.  Just need to sort the other issue
> (which I know is not QLMS).
> Many thanks.  How do we make a €€donation?
> 
> 
> Sent from my iPhone using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-08 Thread digimaster


jasell wrote: 
> Do you mean that you announced players on the local network from 
> Spotty. And then from a Spotify acount on a device on the same network
> could connect and play Spotify-music on a squeezebox.
> 
> Do we need to do anything to get this working or do you need to release
> a new QLMS version that enables this?
> 
> 
> Sent from my iPhone using TapatalkI did not special. Just add a account to 
> Lms. And in the setting pages
for every player set Spotify actieve. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-11 Thread digimaster


You must setup one spotify accont in LMS.
And after that, and enable spotify connected on the player page.
Then it works.

jasell wrote: 
> Ok, I see.
> 
> I wish to avoid to add the Spotify account into LMS Spotty.
> 
> If the players can be announced on the local network this should be
> possible. But there are the challenges @mherger described.
> 
> Adding the acounts are no problem for us in the family, apart of some
> hazzle when switching between acounts.
> 
> This would be mostly beneficial when we have friends over and they come
> with their Spotify acounts.
> 
> 
> Sent from my iPhone using Tapatalk



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Boom Time after update

2018-11-12 Thread digimaster


cphan wrote: 
> Just updated LMS on my QNAP server to
> Logitech Media Server Version: 7.9.2 - 1541869104 @ Sat Nov 10 18:20:42
> CET 2018
> 
> On reboot I noticed that my two Boom's now display time as GMT+1, but my
> touch still displays the correct time (EST / GMT -5).
> I connected the booms to mysqueezeboxcom and that corrects the timezone,
> but it reverts to the incorrect time on re-connection to the local
> network.
> I've done a full reboot of the network, but that hasn't resolved my
> issue.  Any thoughts on what may be causing this issue?  The boom is my
> alarm clock, so the 6 hr offset isn't helpful.Are you using 
> QLogitechMediaServer on you're Qnap. Then in the next
release, this issue will be fixed. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=109740

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Boom Time after update

2018-11-12 Thread digimaster


cphan wrote: 
> Yes, I'm using QLogitechMediaServer. How long until the release, I may
> roll back as I need my alarm to be correct.
> 
> ThanksI think tomorrow, just need to test some things before releasing it.

What you could do, it Logon on by ssh shell. Then do [ CD /share/*/.
qpkg/LogitehMediaServer] and [ rm -R .config/LMSROOT/etc/localtime].
Then restart QLogitechMediaServer and the time should be right. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=109740

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-13 Thread digimaster


*

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.

Version 2.02.00 13-11-2018  :P 
= QlogitechMediaServer version 2.02.00
= 13-11-2018
+ Added support for aarch64/arm64 QNap nas-systems.
* On some installations, the time was set wrong on Logitech devices
connected to LMS.
Fixed in this release. ( Thanks to oneshot for finding the solution !
)
* Rebuild the chroot file-system, all used programs are the latest. (
all release are based on Debian stretch 9 )
* All release's now got the same programs included like lame, ffmpeg,
flac, sox, mplayer, mac ( ape ) a.m.
( Tested all plugins available, they al seem to work ! )
+ Now there is also a logfile for MusicIP, so you can check on errors if
it won't start !

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

On every startup of the services, will check on updates for LMS. If
available will be upgraded ( Official and Nightly ), can be adjusted in
the .QLMS.config file.

Questions or trouble regarding LogitechMediaServer itself , go to the
SlimDevices forum website. 
http://forums.slimdevices.com

More information on MusicIP, go to https://www.spicefly.com/ or
http://forums.slimdevices.com

Hope it runs as nice, as it does on my QNap ts-453a ! :o 
*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-13 Thread digimaster


If exist
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/.config/LMSROOT/etc/localtime,
you should remove it.
Logon to ssh do
[ cd /share/*/.qpkg/LogitechMediaServer ]
[ rm -R .config/LMSROOT/etc/localtime ]
[ ./QLogitechMediaServer.sh restart ]
Wait until it's start it started, then it should be fixed !


cphan wrote: 
> I'm still having an issue with time on my booms after update to 2.02.00
> 
> My SB Touch displays the correct time (UTC -5) but the booms still
> display UTC +1
> zdump
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/.config/LMSROOT/etc/localtime
> returns the correct time which both the server and the Touch display
> Tue Nov 13 09:04:02 2018 EST
> 
> Any thoughts on how to resolve this?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-13 Thread digimaster


If you have installed tho older version, through the Qnap app center in
the app store from Qnap Club.
Just use the update button.

If you have installed it manually through the QNap app center.
Download the right version, and install it through the app center.
The app center will see it as a update, and install it like a update.

Best suggested way is, add QNap club store to the app center, and
install it from there.
Then you always get a notification, and updating is easy.
And you cab also add other interesting stuff from the Q|Nap Club store.

anadigi wrote: 
> I am wondering how to update to the newer version without uninstall and
> reinstall the LogitechMediaServer?



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-13 Thread digimaster


Oke strange but looks like it has nothing to do, with
QLogitechMediaServer because the only thing which could do it was
localtime.
Curious what it could be, hope Michael knows a solution.
|Thank for letting me know. ;-)

cphan wrote: 
> no localtime does not exist in .config/LMSHOST/etc/
> 
> I just did a full remove and re-install and the issue persists.
> Running
> Logitech Media Server Version: 7.9.2 - 1541869104 @ Sat Nov 10 18:20:42
> CET 2018
> 
> I'll go back to my original post and see if Michael as any ideas...



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-13 Thread digimaster


anadigi wrote: 
> I do installed from the QNap Club; but I don't see the update. option
> though.Strange hat no trouble on this side. Showed the update, and could do 
> the
upgraded. So why it's not working at you're end, have no idea. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Boom Time after update

2018-11-13 Thread digimaster


cphan wrote: 
> Is there a way to set a localized time?
> 
> I'll reach out to QNAP to see what could be going on, but in the
> meantime I need my booms to display the correct time as they are alarm
> clocks in my house.
> 
> Interestingly, I tried a different build of LMS on my QNAP server (a
> docker container instead of the QLogitechMediaServer App) and my time
> issue persisted.  So it's not related to the specific build of LMS but
> instead some server specific issue.Okay there is one thing you could try. 
> Logon by ssh, then go to the
.qpkg/LogitehMediaServer directory. And then do [ touch .LOCALTIME ].
Then restart lms with ./LogitehMediaServer.sh restart, and wait until
it's started and you can access the webgui. Then check about the time.
Please let me know how that go? 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=109740

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Boom Time after update

2018-11-14 Thread digimaster

cphan wrote: 
> Yes, this worked, thanks for your persistence on helping me find a
> solution.Oké then we found the solution. Great know now what the trouble is. 
> Will
be fixed in next release. Thanks for letting me know. This are the fine
tuning things. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=109740

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2018-11-14 Thread digimaster


*

No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.

= QlogitechMediaServer version 2.02.01
= 14-11-2018  :D
* Bugfixs release regarding time on some LogitechMedia devices, still
where not getting right time !
Should be fixed now. ( Localtime is no correctly taken from host
system, Logitech BOOM )
+ Add support for x09/x19. IMPORTANT still in beta, using perl 5.20,
because higher is not supported in LMS.
Due to this limitation, includes programs, are not the latest !
IMPORTANT arm-x09/arm-x19 is still beta/EXPERIMENTAL !.( Would be nice
i've you rapport i've it works ? ) :o
* Some finetuning and small correction.

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Questions or trouble regarding LogitechMediaServer itself , go to the
SlimDevices forum website. 
http://forums.slimdevices.com

More information on MusicIP, go to https://www.spicefly.com/ or
http://forums.slimdevices.com
*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-11-14 Thread digimaster


*

No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.

= QlogitechMediaServer version 2.02.01
= 14-11-2018  :D
* Bugfixs release regarding time on some LogitechMedia devices, still
where not getting right time !
Should be fixed now. ( Localtime is no correctly taken from host
system, Logitech BOOM )
+ Add support for x09/x19. IMPORTANT still in beta, using perl 5.20,
because higher is not supported in LMS.
Due to this limitation, includes programs, are not the latest !
IMPORTANT arm-x09/arm-x19 is still beta/EXPERIMENTAL !.( Would be nice
i've you rapport i've it works ? ) :o
* Some finetuning and small correction.

'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)

'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)

Questions or trouble regarding LogitechMediaServer itself , go to the
SlimDevices forum website. 
http://forums.slimdevices.com

More information on MusicIP, go to https://www.spicefly.com/ or
http://forums.slimdevices.com
*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2018-11-14 Thread digimaster


dolodobendan wrote: 
> This is what I get when trying to update manually:
> 
> "You're trying to install the wrong version for LogitechMediaServer, it
> needs the x86_64 version!"
> 
> Filename is LogitechMediaServer_2.02.01_x86_64.qpkgWhich file are you trying 
> to install? 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


  1   2   3   4   5   6   7   8   >