[freenet-support] Frost and 0.7
-BEGIN TYPE III ANONYMOUS MESSAGE- Message-type: plaintext For the last three weeks or so I've not been able to get any incoming messages on Frost at all and freesites are getting slower and slower to load. I've got 16 refs and most of them work most of the time: I've re-installed frost clean several times and made sure to have current stable freenet build as well as trying the latest testing builds Node status overview * bwlimitDelayTime: 923ms * nodeAveragePingTime: 589ms * networkSizeEstimateSession: 391 nodes * nodeUptime: 1h35m (had to reboot, normally 24/7) * routingMissDistance: 0.0441 * backedOffPercent: 42.8% * pInstantReject: 0.7% Current activity * Inserts: 12 * Requests: 34 * Transferring Requests: 5 * ARK Fetch Requests: 9 * Total Output: 9.57 MiB (1.70 KiBps) * Payload Output: 4.32 MiB (789 Bps) (45%) * Total Input: 10.1 MiB (1.80 KiBps) * Output Rate: 9.30 KiBps (of 10.0 KiBps) * Input Rate: 9.70 KiBps (of 10.0 KiBps) Peer statistics * Connected: 3 * Backed off: 5 * Disconnected: 7 * Never Connected: 1 -END TYPE III ANONYMOUS MESSAGE-
[freenet-support] Frost and 0.7
> > > >Only thing I can suggest is make sure you are using the latest Frost: > > > > I am, as announced on 0.5 by bback: > > CHK at > uM-aOx2XaX1cGFlH634yNgvV~5MMAwI,Fkadvhpc-wgeQSzdH9-BtQ/frost-23-Dec-2006.zip > CHK at > AsCY7yi6LaXUfVuPqV7eGVD5XIEKAwI,LCBeNVEM929RoZyLvdYyuA/frost-23-Dec-2006-source.zip > > (0.5 keys) Hmmm. Are there any errors in your Freenet nodes wrapper.log? Also make sure your FCP port is enabled. In the Darknet page at the bottom (May need to have advanced mode turned on, not sure) you should see something like: FCP: 9481/tcp (for Freenet clients such as Frost and Thaw) You should make sure this doesn't say disabled How about in Frosts log? Anything labeled SEVERE that looks like a crash or gives any clue? -- I may disagree with what you have to say, but I shall defend, to the death, your right to say it. - Voltaire Those who would give up Liberty, to purchase temporary Safety, deserve neither Liberty nor Safety. - Ben Franklin
[freenet-support] Frost and 0.7
On 12/28/06, remailer at invalid.com wrote: > -BEGIN TYPE III ANONYMOUS MESSAGE- > Message-type: plaintext > > For the last three weeks or so I've not been able to get any incoming > messages on Frost at all and freesites are getting slower and slower to load. > > I've got 16 refs and most of them work most of the time: > > I've re-installed frost clean several times and made sure to have current > stable freenet build as well as trying the latest testing builds > > Node status overview > > * bwlimitDelayTime: 923ms > * nodeAveragePingTime: 589ms > * networkSizeEstimateSession: 391 nodes > * nodeUptime: 1h35m (had to reboot, normally 24/7) > * routingMissDistance: 0.0441 > * backedOffPercent: 42.8% > * pInstantReject: 0.7% > > > Current activity > > * Inserts: 12 > * Requests: 34 > * Transferring Requests: 5 > * ARK Fetch Requests: 9 > * Total Output: 9.57 MiB (1.70 KiBps) > * Payload Output: 4.32 MiB (789 Bps) (45%) > * Total Input: 10.1 MiB (1.80 KiBps) > * Output Rate: 9.30 KiBps (of 10.0 KiBps) > * Input Rate: 9.70 KiBps (of 10.0 KiBps) > > > Peer statistics > > * Connected: 3 > * Backed off: 5 > * Disconnected: 7 > * Never Connected: 1 > > > -END TYPE III ANONYMOUS MESSAGE- Only thing I can suggest is make sure you are using the latest Frost: USK at oyjm9tEWQ1fYbYDsBfJ017-ip9uTPzPLB52QHMduBIc,HE~wfG205QnSscK-U9FX7hAtGVkJg1~GRjkU1qkceTE,AQABAAE/frost/1/ -- I may disagree with what you have to say, but I shall defend, to the death, your right to say it. - Voltaire Those who would give up Liberty, to purchase temporary Safety, deserve neither Liberty nor Safety. - Ben Franklin
[freenet-support] Help
oregonrebel at gmail.com wrote: > I can't install FN on Mac OS X 10.4.9. > I unzipped the archive into a folder, but when I type " > ./bin/1run.sh > ./run.sh start > " > > in Terminal, I get this message: > > *-bash: > ./bin/1run.sh > ./run.sh start > : No such file or directory* > > The instructions say " Basically, all you need to do is make a directoy > for freenet, unpack the tarball into that directory, change the > permissions so that you can read write and execute as user (non-root) in > thet directory and run the start script using the following commands : " > ./bin/1run.sh > ./run.sh start > " > > What am I doing wrong? And I'm still unclear about using this-I see a > list of "tools", do I need something else to use FN? I want to keep this > as simple as possible. Also, the FAQs do not say how much storage space > must be dedicated to FN. I assume I can choose an external drive? It's probably something simple. Don't panic! do this: ls -lh ./bin/1run.sh you should see whether the file actually exists and its size. If the file doesn't exist then it's possible that you are running your commands from a wrong directory. Make sure that you change your directory to whereever you've installed your Freenet to. If the filesize is somehow 0, then something was wrong with your download/install process. Try again. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum "None of us are free until all of us are free."~ Mihail Bakunin
Re: [freenet-support] Help
[EMAIL PROTECTED] wrote: I can't install FN on Mac OS X 10.4.9. I unzipped the archive into a folder, but when I type ./bin/1run.sh ./run.sh start in Terminal, I get this message: *-bash: ./bin/1run.sh ./run.sh start : No such file or directory* The instructions say Basically, all you need to do is make a directoy for freenet, unpack the tarball into that directory, change the permissions so that you can read write and execute as user (non-root) in thet directory and run the start script using the following commands : ./bin/1run.sh ./run.sh start What am I doing wrong? And I'm still unclear about using this-I see a list of tools, do I need something else to use FN? I want to keep this as simple as possible. Also, the FAQs do not say how much storage space must be dedicated to FN. I assume I can choose an external drive? It's probably something simple. Don't panic! do this: ls -lh ./bin/1run.sh you should see whether the file actually exists and its size. If the file doesn't exist then it's possible that you are running your commands from a wrong directory. Make sure that you change your directory to whereever you've installed your Freenet to. If the filesize is somehow 0, then something was wrong with your download/install process. Try again. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
[freenet-support] Frost and 0.7
-BEGIN TYPE III ANONYMOUS MESSAGE- Message-type: plaintext For the last three weeks or so I've not been able to get any incoming messages on Frost at all and freesites are getting slower and slower to load. I've got 16 refs and most of them work most of the time: I've re-installed frost clean several times and made sure to have current stable freenet build as well as trying the latest testing builds Node status overview * bwlimitDelayTime: 923ms * nodeAveragePingTime: 589ms * networkSizeEstimateSession: 391 nodes * nodeUptime: 1h35m (had to reboot, normally 24/7) * routingMissDistance: 0.0441 * backedOffPercent: 42.8% * pInstantReject: 0.7% Current activity * Inserts: 12 * Requests: 34 * Transferring Requests: 5 * ARK Fetch Requests: 9 * Total Output: 9.57 MiB (1.70 KiBps) * Payload Output: 4.32 MiB (789 Bps) (45%) * Total Input: 10.1 MiB (1.80 KiBps) * Output Rate: 9.30 KiBps (of 10.0 KiBps) * Input Rate: 9.70 KiBps (of 10.0 KiBps) Peer statistics * Connected: 3 * Backed off: 5 * Disconnected: 7 * Never Connected: 1 -END TYPE III ANONYMOUS MESSAGE- ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
Re: [freenet-support] Frost and 0.7
On 12/28/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: -BEGIN TYPE III ANONYMOUS MESSAGE- Message-type: plaintext For the last three weeks or so I've not been able to get any incoming messages on Frost at all and freesites are getting slower and slower to load. I've got 16 refs and most of them work most of the time: I've re-installed frost clean several times and made sure to have current stable freenet build as well as trying the latest testing builds Node status overview * bwlimitDelayTime: 923ms * nodeAveragePingTime: 589ms * networkSizeEstimateSession: 391 nodes * nodeUptime: 1h35m (had to reboot, normally 24/7) * routingMissDistance: 0.0441 * backedOffPercent: 42.8% * pInstantReject: 0.7% Current activity * Inserts: 12 * Requests: 34 * Transferring Requests: 5 * ARK Fetch Requests: 9 * Total Output: 9.57 MiB (1.70 KiBps) * Payload Output: 4.32 MiB (789 Bps) (45%) * Total Input: 10.1 MiB (1.80 KiBps) * Output Rate: 9.30 KiBps (of 10.0 KiBps) * Input Rate: 9.70 KiBps (of 10.0 KiBps) Peer statistics * Connected: 3 * Backed off: 5 * Disconnected: 7 * Never Connected: 1 -END TYPE III ANONYMOUS MESSAGE- Only thing I can suggest is make sure you are using the latest Frost: [EMAIL PROTECTED],HE~wfG205QnSscK-U9FX7hAtGVkJg1~GRjkU1qkceTE,AQABAAE/frost/1/ -- I may disagree with what you have to say, but I shall defend, to the death, your right to say it. - Voltaire Those who would give up Liberty, to purchase temporary Safety, deserve neither Liberty nor Safety. - Ben Franklin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
Re: [freenet-support] Frost and 0.7
-BEGIN TYPE III ANONYMOUS MESSAGE- Message-type: plaintext In [EMAIL PROTECTED] Juiceman [EMAIL PROTECTED] wrote: On 12/28/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: -BEGIN TYPE III ANONYMOUS MESSAGE- Message-type: plaintext For the last three weeks or so I've not been able to get any incoming messages on Frost at all and freesites are getting slower and slower to load. I've got 16 refs and most of them work most of the time: I've re-installed frost clean several times and made sure to have current stable freenet build as well as trying the latest testing builds Node status overview * bwlimitDelayTime: 923ms * nodeAveragePingTime: 589ms * networkSizeEstimateSession: 391 nodes * nodeUptime: 1h35m (had to reboot, normally 24/7) * routingMissDistance: 0.0441 * backedOffPercent: 42.8% * pInstantReject: 0.7% Current activity * Inserts: 12 * Requests: 34 * Transferring Requests: 5 * ARK Fetch Requests: 9 * Total Output: 9.57 MiB (1.70 KiBps) * Payload Output: 4.32 MiB (789 Bps) (45%) * Total Input: 10.1 MiB (1.80 KiBps) * Output Rate: 9.30 KiBps (of 10.0 KiBps) * Input Rate: 9.70 KiBps (of 10.0 KiBps) Peer statistics * Connected: 3 * Backed off: 5 * Disconnected: 7 * Never Connected: 1 -END TYPE III ANONYMOUS MESSAGE- Only thing I can suggest is make sure you are using the latest Frost: I am, as announced on 0.5 by bback: [EMAIL PROTECTED],Fkadvhpc-wgeQSzdH9-BtQ/frost-23-Dec-2006.zip [EMAIL PROTECTED],LCBeNVEM929RoZyLvdYyuA/frost-23-Dec-2006-source.zip (0.5 keys) -END TYPE III ANONYMOUS MESSAGE- ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
Re: [freenet-support] Frost and 0.7
Only thing I can suggest is make sure you are using the latest Frost: I am, as announced on 0.5 by bback: [EMAIL PROTECTED],Fkadvhpc-wgeQSzdH9-BtQ/frost-23-Dec-2006.zip [EMAIL PROTECTED],LCBeNVEM929RoZyLvdYyuA/frost-23-Dec-2006-source.zip (0.5 keys) Hmmm. Are there any errors in your Freenet nodes wrapper.log? Also make sure your FCP port is enabled. In the Darknet page at the bottom (May need to have advanced mode turned on, not sure) you should see something like: FCP: 9481/tcp (for Freenet clients such as Frost and Thaw) You should make sure this doesn't say disabled How about in Frosts log? Anything labeled SEVERE that looks like a crash or gives any clue? -- I may disagree with what you have to say, but I shall defend, to the death, your right to say it. - Voltaire Those who would give up Liberty, to purchase temporary Safety, deserve neither Liberty nor Safety. - Ben Franklin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
[freenet-support] Freenet tests
I'm trying to run some tests on a fake freenet network. Basically, I've set up a bunch of nodes that start out with random locations (normal startup). Then I let them crank away and test how long it takes for each node to search for each other node. The nodes are connected in small world fashion (2d grid plus random long connections). I've used network sizes from 5 to 80. The problem is that they seem to keep swapping locations with each other forever, without ever settling down to a stable topography. Is this by design? Do nodes always switch with each other, even if they have already swapped? Am I using too few nodes to see any results? I figured it should work on a net of any size, so I'm confused. Thanks mrwigglet ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
