Re: Don't remove SM1 after installing SM2
David E. Ross wrote: On 1/17/2010 3:16 PM, Ray_Net wrote: David E. Ross wrote: On 1/13/2010 5:39 AM, Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM1. - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. I installed SeaMonkey 2.0 under Windows XP back in October and now have SeaMonkey 2.0.2. I just now removed SeaMonkey 1.1.18 without any problem. I did not have to reinstall SeaMonkey 2.0.2. I initially installed SeaMonkey 2.0 in a different folder than SeaMonkey 1.1.18. My four profiles for SeaMonkey 2.0 were also under a different folder than the profiles for SeaMonkey 1.1.18. For the startup, I created separate folders for the two versions of SeaMonkey, both under a single Mozilla folder, which also has the startup for Thunderbird. Obviously, if I wanted to install and use two different versions, I had to avoid overlapping the two versions. Nice to know that you don't get any problem ... but could you start SeaMonkey by using this way: Start - All Programs - Seamonkey ... ? Yes. Because I set my Start Menu Properties in Windows XP to Classic Start menu and because I group SeaMonkey and Thunderbird together under Mozilla, the sequence is [Start Programs Mozilla SeaMonkey2 SeaMonkey]. Before I removed SeaMonkey 1.1.18, I also had [Start Programs Mozilla SeaMonkey1 SeaMonkey]. This was part of how I avoided overlapping the two versions. Ok, now i understand. I had installed SM1 all by default, then installed SM2 by default. Finally i removed SM1 and the problem was that the start-browser and the start-mail dissappeared from Start - All Programs - Seamonkey because SM1 and SM2 have different repositories, different program locations but have the *same* location for the start links under Start - All Programs - Seamonkey. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
On 1/13/2010 5:39 AM, Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM1. - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. I installed SeaMonkey 2.0 under Windows XP back in October and now have SeaMonkey 2.0.2. I just now removed SeaMonkey 1.1.18 without any problem. I did not have to reinstall SeaMonkey 2.0.2. I initially installed SeaMonkey 2.0 in a different folder than SeaMonkey 1.1.18. My four profiles for SeaMonkey 2.0 were also under a different folder than the profiles for SeaMonkey 1.1.18. For the startup, I created separate folders for the two versions of SeaMonkey, both under a single Mozilla folder, which also has the startup for Thunderbird. Obviously, if I wanted to install and use two different versions, I had to avoid overlapping the two versions. -- David E. Ross http://www.rossde.com/ Go to Mozdev at http://www.mozdev.org/ for quick access to extensions for Firefox, Thunderbird, SeaMonkey, and other Mozilla-related applications. You can access Mozdev much more quickly than you can Mozilla Add-Ons. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
David E. Ross wrote: On 1/13/2010 5:39 AM, Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM1. - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. I installed SeaMonkey 2.0 under Windows XP back in October and now have SeaMonkey 2.0.2. I just now removed SeaMonkey 1.1.18 without any problem. I did not have to reinstall SeaMonkey 2.0.2. I initially installed SeaMonkey 2.0 in a different folder than SeaMonkey 1.1.18. My four profiles for SeaMonkey 2.0 were also under a different folder than the profiles for SeaMonkey 1.1.18. For the startup, I created separate folders for the two versions of SeaMonkey, both under a single Mozilla folder, which also has the startup for Thunderbird. Obviously, if I wanted to install and use two different versions, I had to avoid overlapping the two versions. Nice to know that you don't get any problem ... but could you start SeaMonkey by using this way: Start - All Programs - Seamonkey ... ? ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
On 1/17/2010 3:16 PM, Ray_Net wrote: David E. Ross wrote: On 1/13/2010 5:39 AM, Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM1. - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. I installed SeaMonkey 2.0 under Windows XP back in October and now have SeaMonkey 2.0.2. I just now removed SeaMonkey 1.1.18 without any problem. I did not have to reinstall SeaMonkey 2.0.2. I initially installed SeaMonkey 2.0 in a different folder than SeaMonkey 1.1.18. My four profiles for SeaMonkey 2.0 were also under a different folder than the profiles for SeaMonkey 1.1.18. For the startup, I created separate folders for the two versions of SeaMonkey, both under a single Mozilla folder, which also has the startup for Thunderbird. Obviously, if I wanted to install and use two different versions, I had to avoid overlapping the two versions. Nice to know that you don't get any problem ... but could you start SeaMonkey by using this way: Start - All Programs - Seamonkey ... ? Yes. Because I set my Start Menu Properties in Windows XP to Classic Start menu and because I group SeaMonkey and Thunderbird together under Mozilla, the sequence is [Start Programs Mozilla SeaMonkey2 SeaMonkey]. Before I removed SeaMonkey 1.1.18, I also had [Start Programs Mozilla SeaMonkey1 SeaMonkey]. This was part of how I avoided overlapping the two versions. -- David E. Ross http://www.rossde.com/ Go to Mozdev at http://www.mozdev.org/ for quick access to extensions for Firefox, Thunderbird, SeaMonkey, and other Mozilla-related applications. You can access Mozdev much more quickly than you can Mozilla Add-Ons. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
cyberzen wrote: Ray_Net a écrit : Leonidas Jones wrote: Ray_Net wrote: Martin Freitag wrote: Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards That's right ... but what was those missing £%$*! damned shortcuts ... i don't remember :-) In the XP Start menu? I have Profile Manager, Browser, Safe-Mode and Mail in that order. You don't understand i have also the same now. The problem was that after installing SM2 - then uninstall SM1 some item simply vanished. In that situation: what was those missing £%$*! damned shortcuts ... i don't remember :-) The best way of re-instate all SM2 item was to do : de-install SM2 then re-install SM2. in that case I think it was not useful to uninstall SM2 before reinstalling it, and that's what I have done... no problem héhé. I ws not so clever - thanks for the idea. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards Martin -- () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - http://www.asciiribbon.org/index-de.html ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Martin Freitag wrote: Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards That's right ... but what was those missing £%$*! damned shortcuts ... i don't remember :-) ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Ray_Net wrote: Martin Freitag wrote: Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards That's right ... but what was those missing £%$*! damned shortcuts ... i don't remember :-) In the XP Start menu? I have Profile Manager, Browser, Safe-Mode and Mail in that order. Lee ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Leonidas Jones wrote: Ray_Net wrote: Martin Freitag wrote: Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards That's right ... but what was those missing £%$*! damned shortcuts ... i don't remember :-) In the XP Start menu? I have Profile Manager, Browser, Safe-Mode and Mail in that order. You don't understand i have also the same now. The problem was that after installing SM2 - then uninstall SM1 some item simply vanished. In that situation: what was those missing £%$*! damned shortcuts ... i don't remember :-) The best way of re-instate all SM2 item was to do : de-install SM2 then re-install SM2. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Ray_Net a écrit : Leonidas Jones wrote: Ray_Net wrote: Martin Freitag wrote: Leonidas Jones schrieb: Ray_Net wrote: Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. It is. When you remove SM1 now, it will remove most of the shortcuts. But that doesn't hurt that much, just re-create them. regards That's right ... but what was those missing £%$*! damned shortcuts ... i don't remember :-) In the XP Start menu? I have Profile Manager, Browser, Safe-Mode and Mail in that order. You don't understand i have also the same now. The problem was that after installing SM2 - then uninstall SM1 some item simply vanished. In that situation: what was those missing £%$*! damned shortcuts ... i don't remember :-) The best way of re-instate all SM2 item was to do : de-install SM2 then re-install SM2. in that case I think it was not useful to uninstall SM2 before reinstalling it, and that's what I have done... no problem ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Don't remove SM1 after installing SM2
I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM1. - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Leonidas Jones wrote: Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. You could also have used the Properties dialog for the Start menu shortcuts, to repoint them to the new location for SeaMonkey 2.0. Its a hassle, I admit, but it would have saved you the ininstall/reinstall of SM2. (i have modified my previous text due to a mistake) The problem was first because having both SM intalled, the start menu dialog points to a mixed of SM1 and SM2; then after removing SM1 the problem is not to repoint somewhere, but to réinstate loosed links. This last action removing/installing SM2 was very fast(no migration step) and give me a surely correct situation. This is to explain why i have done this to cure the problem. Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Don't remove SM1 after installing SM2
Ray_Net wrote: Leonidas Jones wrote: Ray_Net wrote: I am under Windows XP SP3 and i finally have installed SM2.0.2 without any problem till now :-) except the following. This is to inform everybody that he should - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. I had installed SM2 without removing first SM1: - I encountred a mixed between SM1 and SM2 in the Start - All Programs - Seamonkey - Then to eliminate the mix - i used add/remove program to Remove SM1. - The mix dissappeared - so far so good - BUT also the link to start SM2 by using Start - All Programs - Seamonkey To remove this problem: - I used add/remove program to Remove SM2. - And finally i install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. - Now the Start - All Programs - Seamonkey is ok and suit SM2 only and completely. So i repeat: - First use add/remove program to Remove SM1. - Then Install SM2 by running the donwloaded SeaMonkey Setup 2.0.2.exe. To avoid the problem i encountered. You could also have used the Properties dialog for the Start menu shortcuts, to repoint them to the new location for SeaMonkey 2.0. Its a hassle, I admit, but it would have saved you the ininstall/reinstall of SM2. (i have modified my previous text due to a mistake) The problem was first because having both SM intalled, the start menu dialog points to a mixed of SM1 and SM2; then after removing SM1 the problem is not to repoint somewhere, but to réinstate loosed links. This last action removing/installing SM2 was very fast(no migration step) and give me a surely correct situation. This is to explain why i have done this to cure the problem. Anyway the message i will pass to everybody is: Don't remove SM1 after installing SM2 ... DO IT BEFORE. All I can say is that I installed SM 2.0 without removing SM 1.1.18. BOth currently exist on my XP machine. The StArt menu shortcuts ppoint to SM 2.0., so its not a consistent behavior, I guess. Lee ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey