Re: [time-nuts] 10 MHz - 16 MHz clock multiplier
On 1/4/2013 4:48 PM, Bob Camp wrote: Hi As I recall the spec was: 1) Cheap 2) no phase slips on the 16 MHz relative to 10 MHz 3) Cheap Bob GAK! Here is the original from TVB What's the simplest way to generate 16 MHz from 10 MHz? This will be for clocking a microcontroller at 16 MHz given 10 MHz (Cs/Rb/GPSDO). Low price and low parts count is a goal; jitter is not a concern but absolute long-term phase coherence is a must. The ICS525 (as in TAPR Clock-Block) is a good candidate but I was wondering if there's something cheaper, less functional, and maybe not SSOP. Any suggestions? Thanks, /tvb This cluster f**k of responses losing track of the original but blathering on for days is so typical of the group lately. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] SSR-6t Connector
Does anyone have the pin-out for the 5-pin connector on this board? The 10-pin connector is documented, but not the single-in-line 5-pin connector near the label HGR200 (?). I didn't see it documented in this thread either. Thanks, David -- SatSignal Software - Quality software written to your requirements Web: http://www.satsignal.eu Email: david-tay...@blueyonder.co.uk ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] SSR-6t Connector
That header is used for programming the on board PIC. I've rung it out as follows: Header pin 1 - PIC pin 18 MCLR (active low) Header pin 2 - PIC pins 28 40 VDD Header pin 3 - PIC pins 29 39 VSS Header pin 4 - PIC pin 21 PGD1 Header pin 5 - PIC pin 22 PGC1 73 Dale NV8U Sent from my iPhone On Jan 5, 2013, at 6:46 AM, David J Taylor david-tay...@blueyonder.co.uk wrote: Does anyone have the pin-out for the 5-pin connector on this board? The 10-pin connector is documented, but not the single-in-line 5-pin connector near the label HGR200 (?). I didn't see it documented in this thread either. Thanks, David -- SatSignal Software - Quality software written to your requirements Web: http://www.satsignal.eu Email: david-tay...@blueyonder.co.uk ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] SSR-6t Connector
From: Dale J. Robertson [] That header is used for programming the on board PIC. I've rung it out as follows: Header pin 1 - PIC pin 18 MCLR (active low) Header pin 2 - PIC pins 28 40 VDD Header pin 3 - PIC pins 29 39 VSS Header pin 4 - PIC pin 21 PGD1 Header pin 5 - PIC pin 22 PGC1 73 Dale NV8U === Perfect, Dave. I've forwarded that info to Brent who is also interested. 73, David GM8ARV -- SatSignal Software - Quality software written to your requirements Web: http://www.satsignal.eu Email: david-tay...@blueyonder.co.uk ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] YIG oscillators
Hi Alan, i´ve followed your reference and found their index here: http://www.vhfcomm.co.uk/i-oscillators.html Got pointers for 4 or 5 articles about YIGs. Than you! Daniel Em 04/01/2013 12:30, Alan Melia escreveu: Hi Daniel, I cant remember the reference the web site might help but there have been at least a couple of articles on YIG modules in VHF Comms magazine Alan G3NYK - Original Message - From: Daniel Mendes dmend...@gmail.com To: Discussion of precise time and frequency measurement time-nuts@febo.com Sent: Friday, January 04, 2013 2:19 PM Subject: [time-nuts] YIG oscillators Hi, maybe this topic is a bit boundary for this list, but i´ll just ask for general directions I´ve discovered these wonderfull bits of hardware called YIG (Yttrium iron garnet) Oscillators (and filters!) in Ebay. If someone doesn´t know what i´m talking about, they are very broadband tunnable oscillators and filters. Now, the questions: 1) Does someone has some good references about them? 2) Can I get them new from somewere in decent prices or just collect the trash from ebay? (as most of our Rubudium, OCXOs, Thunderbolts, etc) Thank you for any help... Daniel ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] YIG oscillators
Em 04/01/2013 15:45, Lizeth Norman escreveu: Daniel, Another place to go is's site. He's got lots of good info on the stellex ones as well as controlling them with the rf synthesizer that can be had on that conspicuous auction place. This was the first site I found with detailed info abou how to put them back to work :) I've actually purchased several of these with the thought of using them to drive the LO port of a dbm so that I can rx at 5.84GHz (as well as some other freq's) So did you take the plunge? Buy any toys?? Yes.. but none arrived yet :( I live in Brazil.. things take about 1-3 months to come here from China. Daniel ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] suggestions for free samples from AD
Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
Bob, Tricks like these I need to know about! One I need as a rx unit. The other is just for testing and verification. Would save a few bux. Norm On Sat, Jan 5, 2013 at 4:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
What do you mean fill up the sample bag limit? You can request as few items as you want. David N1HAC On 1/5/13 4:54 PM, Lizeth Norman wrote: Bob, Tricks like these I need to know about! One I need as a rx unit. The other is just for testing and verification. Would save a few bux. Norm On Sat, Jan 5, 2013 at 4:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
David, I figured since I'd have to pay for dev boards. (around 400 US plus ship) I might as well as pick up a few freebies! Have a few parts in mind. Never know what the list might suggest. There is an upper limit of course! Never too many toys. 73 de Norm n3ykf On Sat, Jan 5, 2013 at 5:02 PM, David McGaw n1...@alum.dartmouth.org wrote: What do you mean fill up the sample bag limit? You can request as few items as you want. David N1HAC On 1/5/13 4:54 PM, Lizeth Norman wrote: Bob, Tricks like these I need to know about! One I need as a rx unit. The other is just for testing and verification. Would save a few bux. Norm On Sat, Jan 5, 2013 at 4:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
I wondered because they (we - I used to work there) do not charge shipping on sample orders from the website. David On 1/5/13 5:13 PM, Lizeth Norman wrote: David, I figured since I'd have to pay for dev boards. (around 400 US plus ship) I might as well as pick up a few freebies! Have a few parts in mind. Never know what the list might suggest. There is an upper limit of course! Never too many toys. 73 de Norm n3ykf On Sat, Jan 5, 2013 at 5:02 PM, David McGaw n1...@alum.dartmouth.org wrote: What do you mean fill up the sample bag limit? You can request as few items as you want. David N1HAC On 1/5/13 4:54 PM, Lizeth Norman wrote: Bob, Tricks like these I need to know about! One I need as a rx unit. The other is just for testing and verification. Would save a few bux. Norm On Sat, Jan 5, 2013 at 4:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. These tricks work best when you actually use that kind of product in your day job and the sales rep has the hope of eventually getting a sale. As a hobbyist, it is much much harder. On Sat, Jan 5, 2013 at 3:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] suggestions for free samples from AD
Hi Which brings up the standard caution to always be very honest about just what you plan to do with the stuff. Inventing a day job is not a good idea… Bob On Jan 5, 2013, at 6:49 PM, Didier Juges shali...@gmail.com wrote: These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. These tricks work best when you actually use that kind of product in your day job and the sales rep has the hope of eventually getting a sale. As a hobbyist, it is much much harder. On Sat, Jan 5, 2013 at 3:36 PM, Bob Camp li...@rtty.us wrote: Hi These days there's a trick where you can borrow things like dev boards. As long as you don't trash them, there's no charge. Often they seem to forget you have them…. Bob On Jan 5, 2013, at 4:29 PM, Lizeth Norman normanliz...@gmail.com wrote: Bob, May have a little pull because I want to purchase two dev boards. It's a few hundred, so they may be persuaded to actually chat with me. Hence the idea of looking for a few cool parts Norm On Sat, Jan 5, 2013 at 3:48 PM, Bob Camp li...@rtty.us wrote: Hi If you happen to know your local Analog sales guy, he can be a big help in situations like this. Bob On Jan 5, 2013, at 2:28 PM, Lizeth Norman normanliz...@gmail.com wrote: Hi all! Title says it all. I have to place an order and need to fill up the sample bag limit. Suggestions?? 73 es HNY de Norm n3ykf ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Rockwell 12 Channel GPS Module TU00-D200-401
Jim: I have three of these (D200's). Never have gotten them to lock to UTC. Seems they were only designed 'navigation' modules and not 'timing.' I just connect them to a little $3.00 USB-TLL interface and use any number of SiRF monitors. They capture up to 6 satellites I think. Tweaking the little Rakon oscillator just affords an unlock (untrack) on the GPS'. If I am doing something I\wrong, ...hopefully someone here can help me. I also have a couple of the NAVMAN (D100's) which do lock up to UTC. They are timing modules. --Don Lewis Austin, TX (Hyde Park) -- From: Jim Broyles jbroy...@ntelos.net Sent: Saturday, January 05, 2013 7:08 PM To: time-nuts@febo.com Subject: [time-nuts] Rockwell 12 Channel GPS Module TU00-D200-401 I just ordered one of these modules. Does anyone out there have any information/thoughts/suggestions on this device? 73 Jim, K9GCS ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
